International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 30, issue 4, 2018

Performance analysis of a FLP problem using AHP-TOPSIS and FAHP-FTOPSIS pp. 401-424

Divya Agarwal and Ajay K.S. Singholi

A state-of the-art literature survey of grey relational analysis applications in competitive business environment pp. 425-448

Arvind Jayant, Vikrant Giri, Pradeep K. Singh and Sunil Luthra

Cloud-based manufacturing execution system: case study FMS pp. 449-467

Ali Vatankhah Barenji

Risk assessment modelling for power optical backbone communication network based on MLFSR-oriented sampling Markov technique pp. 468-485

Huisheng Gao and Yujun He

A multi-objective programming model for selection third-party logistics companies and suppliers in a closed-loop supply chain pp. 486-511

Hashem Omrani, Iman Hushyar, Saman Moradi Zolmabadi and Abolfazl Jafari Asl

Analysis on the characteristics for a new differential crawling device of an insulator inspection robot pp. 512-535

Xiaopeng Li, Wujiu Pan, Shujun Li, Xinqi Wang and Hongguang Wang

Volume 30, issue 3, 2018

Modelling sustainable supply chain management problem with fuzzy demand based on multi-criteria decision making methods pp. 267-297

Mahnaz Mohebalizadeh and Ashkan Hafezalkotob

Influence of process parameters on MRR, kerf width and surface roughness during WEDM on Inconel 718: performance analysis of electrode tool material pp. 298-315

Anshuman Kumar and Kumar Abhishek

Lin-Sontag and common Lyapunov functions for stabilising control of a switched nonlinear systems pp. 316-328

Abdessamad Abdelhedi, Wided Saadi, Driss Boutat and Lassaad Sbita

The influence of different quantity discounts on integrated supplier-retailer inventory model pp. 329-345

Yu-Jen Lin and Shwu-Huey Lin

A robust possibilistic programming model for simultaneous decision of inventory lot-size, supplier selection and transportation mode selection pp. 346-364

Atousa Zarindast, Seyed Mohamad Seyed Hosseini and Mir Saman Pishvaee

Operational behaviour of a clarifier system in the sugar industry using supplementary variable technique pp. 365-386

Ramesh Kumar and M.S. Kadyan

The new ranking method of the decision making units in DEA: with an approach to modifying the cross efficiency method pp. 387-400

Behzad Paryzad, Esmaeil Najafi, Hamed Kazemipoor and Nasser Shahsavari Pour

Volume 30, issue 2, 2018

The process flow optimisation of crankshaft machining considering production logistics pp. 125-137

Xiaohong Lu, Song Wang, Shasha Wang, Lusi Gao and Likun Si

Fractional order model reference adaptive control for SCARA robot trajectory tracking pp. 138-156

Yassine Bensafia, Samir Ladaci, Khatir Khettab and Ahmed Chemori

Supplier selection using improved input efficiency profiling with common set of weights model pp. 157-177

Leyla Fazli

A novel approach based on relaxation and reduction to solve the capacitated lot sizing problem pp. 178-192

Mayank Verma and R.R.K. Sharma

New heuristic to generate an initial basic feasible solution for the balanced transportation problem pp. 193-204

Youssef Harrath and Jihene Kaabi

Online fault diagnosis in partially observed Petri nets pp. 205-218

Jiufu Liu, Zaihong Zhou and Zhisheng Wang

A novel genetic algorithm for the maximum coverage problem in the three-level supply chain network pp. 219-236

Omid Rahmani, Bahman Naderi, Mohammad Mohammadi and Mehrdad Nouri Koupaei

Soft computing method for minutiae-based fingerprint authentication pp. 237-252

Devarasan Ezhilmaran and Manickam Adhiyaman

Investigating the application of meta-heuristic algorithms in optimising opportunistic maintenance: an exploratory study pp. 253-265

Arash Shahin and Saeede Jokar

Volume 30, issue 1, 2018

Unreliable retrial queue with loss and feedback under threshold-based policy pp. 1-20

Chia-Jung Chang, Jau-Chuan Ke and Fu-Min Chang

A decision-making using data envelopment aggressive formulation and theory of constraints to enhance the PVC production line performance pp. 21-39

Mohammed Shurrab, Abbas Al-Refaie, Nabeel Mandahawi and Shorouq Shurrab

Application of multi-objective genetic algorithm to aggregate production planning in a possibilistic environment pp. 40-59

Shahed Mahmud, Md. Sanowar Hossain and Md. Mosharraf Hossain

Prediction of temperature variations using artificial neural networks and ARIMA model pp. 60-77

Ali Namazian, Masoud Ghodsi and Khaled Nawaser

Combat readiness evaluation of a fighter-jet using reliability and cluster analysis pp. 78-102

Panagiotis Tsarouhas, Maria Makrygianni and George J. Besseris

Using a fuzzy MCDM approach to measure project complexity: a case study pp. 103-124

Ehsan Pourjavad and Rene V. Mayorga

Volume 29, issue 4, 2018

Fuzzy goal programming approach on location-routing model for waste containers pp. 413-427

Salih Aka and Gökhan Akyüz

Economic design of exponentially weighted moving average chart with variable sampling interval at fixed times scheme incorporating Taguchi loss function pp. 428-452

Ineen Sultana, Imtiaz Ahmed, Abdullahil Azeem and Nitish Ranjan Sarker

A probabilistic granular tabu search for the distance constrained capacitated vehicle routing problem pp. 453-477

Jose Bernal, John Willmer Escobar, Juan Camilo Paz, Rodrigo Linfati and Gustavo Gatica

Empirical analysis of bus travel time reliability: a case study in Shanghai pp. 478-493

YangBeibei Ji, Wanjing Ma and Shu-yang Zhang

A simulation-based multi-objective optimisation approach in flexible manufacturing system planning pp. 494-506

Arash Apornak, Sadigh Raissi, Mehrdad Javadi, Neda Ahmadizadeh-Tourzani and Ahmad Kazem

Modelling and optimisation of process parameters of electrical discharge diamond drilling of nimonic alloy - an aerospace material pp. 507-532

Umacharan Singh Yadav and Vinod Yadava

Application of logistics principles in management of travel agency pp. 533-546

Katarína Čulková, Erik Weiss, Andrea Rosová and Roland Weiss

Volume 29, issue 3, 2018

Optimisation of EDM process for MRR, TWR and radial overcut of D2 steel: a hybrid RSM-GRA and entropy weight-based TOPSIS approach pp. 273-302

Mohan Kumar Pradhan

Price, production and order decisions in a one-manufacturer multi-retailer supply chain with fuzzy costs: two parameter tuned meta-heuristics pp. 303-337

Mohammad Saeid Atabaki, Abolfazl Mirzazadeh and Saeed Fazayeli

Analytical model of information system development productivity in adaptive and perfective maintenance phases pp. 338-351

Kai Huang, Xiaoying Kong and Li Liu

Energy and magnetostriction analysis and nonlinear model of magnetostrictive actuator for precision drive pp. 352-368

Huifang Liu, Xingwei Sun, Quan Liang and Yuqing Bo

Performance analysis of a discrete-time Geo/G/1 retrial queue under J -vacation policy pp. 369-388

Shweta Upadhyaya

Fuzzy control of an industrial process system using internet and web services pp. 389-404

Hanane Zermane and Hayet Mouss

A final note on the ones assignment method and its variants: they do not work pp. 405-412

Eric Landquist, Curtis Reigle and Francis J. Vasko

Volume 29, issue 2, 2018

Availability optimisation of multi-state series-parallel systems with human failures pp. 127-143

Seyed Sirvan Karimi, Mahdi Karbasian and Reza Tavakkoli-Moghaddam

Use and relevance of quality, safety and environment management tools and techniques: an empirical investigation, case of Moroccan companies pp. 144-162

Mariyam Moumen and Houda El Aoufir

A combination of range-adjusted measure, cross-efficiency and assurance region for assessing sustainability of suppliers in the presence of undesirable factors pp. 163-176

Kamyar Hosseinzadeh Zoroofchi, Reza Farzipoor Saen, Payman Bayat Lari and Majid Azadi

An optimal joint maintenance and spare parts inventory model pp. 177-192

Parag Jafar Siddique, Huynh Trung Luong and Muhammad Shafiq

Cost optimisation analysis of retrial queue with K optional phases of service under multiple working vacations and random breakdowns pp. 193-222

P. Rajadurai, M.C. Saravanarajan and V.M. Chandrasekaran

An experimental investigation on electro discharge machining of Inconel 601 pp. 223-251

Chandramani Upadhyay, Rahul, Saurav Datta, Siba Sankar Mahapatra and Bibhuti Bhusan Biswal

M X / G /1 state dependent arrival queue with optional service and vacation under randomised policy pp. 252-272

Charan Jeet Singh, Binay Kumar and Sandeep Kaur

Volume 29, issue 1, 2018

An optimisation approach for finding an optimal pricing in a hybrid manufacturing/remanufacturing system pp. 1-18

Ankita Ray and Sandeep Mondal

A novel hybrid approach based on fuzzy DEA-AHP pp. 19-30

Ramezan Nemati Keshteli, Owais Torabi, Eesa Mahmoudi and Hassan Ghasemi

Productivity enhancement by component-oriented line balancing method pp. 31-47

A. John Rajan, E.V.V. Ramanamurthy, Rajdeep Nath and Prashant Kumar

Modified improved genetic algorithm to minimise tri-objective functions in a textile mill pp. 48-61

S. Jeyakkannan and T. Prabaharan

Closed form models for dwell point locations with turnover-based storage assignment policy pp. 62-73

Faizul Huq, Trevor S. Hale, Heather S. Lutz and Nikhil A. Pujari

An empirical study to improve software quality through design patterns pp. 74-94

Khalil Elbaz and Allaoua Chaoui

An updated literature review of agile manufacturing: classification and trends pp. 95-126

Apriani Soepardi, Pratikto Pratikto, Purnomo Budi Santoso and Ishardita Pambudi Tama