International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 22, issue 4, 2016

Development of a model and instrument to measure TQM implementation in financial institutions of India pp. 373-392

D. SriLakshmana Kumar and D.B. Jabaraj

A novel DEANP method for customer order decoupling point positioning in a supply chain pp. 393-408

Masoud Rabbani and Helia Yusefnejad

Multi-criteria M-machine SDST flow shop scheduling using modified heuristic genetic algorithm pp. 409-422

D. Satyanarayana and M. Pramiladevi

Research on CO 2 emissions from China's electric power industry based on system dynamics model pp. 423-439

Wei Sun, Jingmin Wang and Yadi Ren

Optimisation of stochastic assembly line for balancing under high variability pp. 440-465

Krishna K. Krishnan, Abdulaziz T. Almaktoom and Prakhash Udayakumar

Stability study of gear meshing area considering friction of tooth surface pp. 466-483

Xiaopeng Li, Dehua Sun, Youjian Liang and Dan Wang

Time-cost-quality-risk trade-off in GIGA projects using specific techniques of hunting dolphins pp. 484-499

Behzad Paryzad and Nasser Shahsavari Pour

Volume 22, issue 3, 2016

A Petri net model for the optimisation and performance evaluation of production system cum packaging pp. 245-261

Hamid Ullah

Optimal production rate in production planning problem with simulation optimisation approach by simulated annealing pp. 262-280

Seyed Mojtaba Sajadi and Mansoureh Farzam Rad

Modelling and solving a congested facility location problem considering systems' and customers' objectives pp. 281-304

Mehdi Seifbarghy and Aida Mansouri

Developing imprecise dual-role hybrid measure of efficiency for international market selection using ternary variable pp. 305-331

Amir Shabani and Reza Farzipoor Saen

Proposed linear-mathematical model for configuring cell and designing unequal-area facility layout in dynamic cellular manufacturing system pp. 332-357

Afsaneh Nouri Houshyar, Zulkiflle Bin Leman, Moh Khairol Anuar Mohd Ariffin, Napsiah Ismail, Hojat Pakzad Moghadam and Hossein Iranmanesh

An enhanced software defect prediction model with multiple metrics and learners pp. 358-371

Shihai Wang, He Ping and Li Zelin

Volume 22, issue 2, 2016

An optimal model of dynamic lot-sizing with transportation decision and an improved ACO algorithm pp. 121-144

Yingjun Li and Zhixiang Chen

The control system for precise five-axis laser/micro-milling machine tool pp. 145-160

Zhenyuan Jia, Yuqin Chen, Wei Liu, Kai Zhao, Ling Wang and Xianming Tu

Business process modelling framework derive and implement IT goals: a case study pp. 161-190

Youseef Alotaibi and Fei Liu

Gearbox degradation diagnosis using supplementary approaches based on the stator current analysis: experimental research pp. 191-206

Abdelkarim Bouras, Slimane Bouras, Aoul Elias Hadjadj and Samir Kerfali

Parametric optimisation of electrical discharge machining process: a numerical approach pp. 207-244

Chinmaya P. Mohanty, Siba Sankar Mahapatra and Jambeswar Sahu

Volume 22, issue 1, 2016

A fuzzy multi-objective genetic algorithm for system reliability optimisation pp. 1-16

Michael Mutingi

A hybrid coding SA method for multi-item capacity-constrained production and delivery scheduling problem with arbitrary job volumes and customer inventory considerations pp. 17-35

De-Yun Wang, Olivier Grunder and Ke-Jun Zhu

Reliability and availability analysis of the serial processes in skim milk powder system of a dairy plant: a case study pp. 36-62

Anil Kr. Aggarwal, Sanjeev Kumar and Vikram Singh

A new proactive approach to construct a robust baseline schedule considering quality factor pp. 63-72

Behrouz Afshar-Nadjafi

Scalability of reconfigurable manufacturing systems based on bowl phenomenon: an implication of modular machines pp. 73-95

Faisal Hasan, P.K. Jain and Dinesh Kumar

Quality function deployment approach to measure supply chain performance: a case study on garments accessories industries pp. 96-120

Md. Ashrafuzzaman, Abdullah Al-Maruf, I.M. Mahbubul, A.B.M. Abdul Malek and A.M.M. Mukaddes

Volume 21, issue 4, 2015

Application of association rule algorithm to industrial safety data mining pp. 415-437

Jirachai Buddhakulsomsiri, Warut Pannakkong and Suebsak Nanthavanij

Design of a self-tuning double EWMA controller for MIMO processes pp. 438-457

Ming-Shan Lu and Shi Jer Wang

Project time and cost estimate at completion based on non-parametric resampling with interval risk pp. 458-473

Afshin Kamyabniya, Seyed Mohammad Seyedhoseini and Saied Yaghoubi

Effect of sequencing flexibility on the performance of flexibility enabled manufacturing system pp. 474-498

Wasif Ullah Khan and Mohammed Ali

Scheduling methodologies for a flexible manufacturing cell with non-identical parallel machines and a robot pp. 499-514

Majid M. Aldaihani

H ∞ nonlinear PID controller tuning based on simple constrained particle swarm optimisation pp. 515-533

Rochdi Bachir Bouiadjra and Mohamed Fayçal Khelfi

A new mathematical model for scheduling flexible flow shop problem with learning and forgetting effects of workers pp. 534-549

Hany Seidgar, Mehdi Abedi and Sahar Tadayoni Rad

Volume 21, issue 3, 2015

Assessment of qualitative factors affecting uncertainty measurement using AHP pp. 277-301

Nitin K. Mandavgade, S.B. Jaju and R.R. Lakhe

A stochastic programming model for hub-and-spoke network with uncertain flows pp. 302-319

Qing-Mi Hu and Zhi-Hua Hu

Efficient mixed integer programming formulations and dispatching rules for parallel machine scheduling with allowing machine idle times pp. 320-333

Chi-Yang Tsai and Yi-Chen Wang

A column generation approach for scheduling a batch processing machine with makespan objective pp. 334-355

Nicholas Wiechman and Purushothaman Damodaran

Prioritising (ranking) of indexes for measuring intellectual capital using FAHP and fuzzy TOPSIS techniques pp. 356-376

Abolfazl Rohani, Elham Keshavarz and Arezu Keshavarz

Group scheduling in hybrid flexible flowshop with sequence-dependent setup times and random breakdowns via integrating genetic algorithm and simulation pp. 377-394

M. Zandieh and A.R. Hashemi

Multi-state system importance analysis method of fuzzy Bayesian networks pp. 395-414

Rui-Jun Zhang, Lu-Lu Zhang and Ming-Xiao Dong

Volume 21, issue 2, 2015

Influence factors and rule of flow pulsation of accelerating pump in hydraulic type wind power generation system pp. 141-153

Cuntang Wang, Xianjun Zhang, Gang Sheng and Fangwei Xie

A hybrid grey-based fuzzy C-means and multiple objective genetic algorithms for project portfolio selection pp. 154-179

Farshad Faezy Razi, Abbas Toloie Eshlaghy, Jamshid Nazemi, Mahmood Alborzi and Alireza Poorebrahimi

Critical success factors of knowledge management: modelling and comparison using various techniques pp. 180-206

Sanjay Kumar, Vinay Singh and Abid Haleem

Automated guided vehicle configurations in flexible manufacturing systems: a comparative study pp. 207-226

Ravindra Kumar, Abid Haleem, Suresh K. Garg and Rajesh K. Singh

Study on a new intelligent PLC with switch management pp. 227-241

GuangFu Wang

Leagility index in supply chain - part-II: case applications, benchmarking and comparative analysis pp. 242-276

Arnab Banerjee and Saroj Kumar Mukhopadhyay

Volume 21, issue 1, 2015

Define value: applying the first lean principle to product development pp. 1-30

Muhammad S. Khan, Ahmed Al-Ashaab, Essam Shehab, Endris Kerga, Celine Martin and Paul Ewers

An effective chart to monitor process averages for serial correlation using ANN approach pp. 31-49

D.R. Prajapati and Sukhraj Singh

Fuzzy evaluation modelling to assess organisational agility pp. 50-67

Chitrasen Samantra, Saurav Datta, Swagatika Mishra and Siba Sankar Mahapatra

Inventory model with stock dependent demand and different holding cost functions pp. 68-82

R.P. Tripathi and Dinesh Singh

Control system for micro milling machine pp. 83-98

Xinxin Wang, Xiaohong Lu, Zhenyuan Jia, Wentao Wang and Fengchen Wang

Optimal designing of variables tightened-normal-tightened sampling scheme by minimising the average sample number pp. 99-118

S. Balamurali and M. Usha

A possibilistic mixed-integer linear programme for dynamic closed-loop supply chain network design under uncertainty pp. 119-140

Fatemeh Zare and M.M. Lotfi