International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 28, issue 4, 2018

Performance comparisons of utilisation of silo and non-silo systems in mechanising fertiliser application in Malaysian oil palm plantation industry pp. 421-432

Muhammad Esyam Bin Adip and Darius El Pebrian

Model-based collaborative development of manufacturing and control systems pp. 433-450

Filmon Andemeskel and Daniel T. Semere

Enhancing remanufacturing efficiency in Malaysia through a knowledge support system: a case study of brake callipers pp. 451-467

Loh Wei Lie, Nurhasyimah Abd Aziz, Dzuraidah Abd Wahab, Mohd Nizam Ab Rahman and Che Husna Azhari

Ranking of companies regarding the effective factors on technology transfer using FAHP and fuzzy TOPSIS techniques pp. 468-493

Shima Arabzadeh

Measuring architecture and design efficiency for enterprise applications pp. 494-529

Viral Gupta, Parmod Kumar Kapur and Deepak Kumar

A statistical monitoring strategy for a pulp and paper industry pp. 530-545

Pulkit Rana, Anupam Das, Swarnambuj Suman and Jhareshwar Maiti

Volume 28, issue 3, 2018

Effect of moisture in gasification of biomass using entrained flow gasifier at constant equivalence ratio pp. 289-299

Dillip Kumar Mohanty and Abhijit Padhiary

Reliability analysis of non-repairable weighted k -out-of- n system using belief universal generating function pp. 300-318

Namita Jaiswal, Seema Negi and S.B. Singh

Double acceptance sampling plan based on the Burr type X distribution under truncated life tests pp. 319-330

Wenhao Gui and Xinman Lu

Research on interval triangular fuzzy multi-attribute fault diagnosis methods based on the grey relation grade pp. 331-345

Yin Liu and Zhaoqin Lu

A new model for selecting sites for chain stores in China pp. 346-359

Horng-Jinh Chang and Chih-Ming Hsieh

Critical component identification and autonomous maintenance activities determination using fuzzy analytical hierarchy process method pp. 360-378

Ahmadi Hamdan Musman and Rosmaini Ahmad

Resource optimisation for an automobile chassis manufacturer through value stream mapping enhanced with simulation technique and constraint programming pp. 379-401

Shyamal Samant, Varinder Kumar Mittal and Ravi Prakash

Manufacturing flow time estimation using the model-tree induction approach in a dynamic job shop environment pp. 402-420

V. Thiagarajan, T.N. Srikantha Dath and Chandrasekharan Rajendran

Volume 28, issue 2, 2018

The training of suppliers: a linear model for optimising the allocation of available hours pp. 135-151

Francesco Lolli, Rita Gamberini, Mauro Gamberi and Marco Bortolini

Application of intuitionistic fuzzy numbers in SWOT analysis pp. 152-165

Emad Roghanian, Baharak Ghorbani and Mohammad Alipour

Finite difference solution to stochastic partial differential equations in reliability pp. 166-177

Arpan Gupta and Mangey Ram

Kinematical performance prediction method for rotary axes of 5-axis machine tool in processing of complex curved surface pp. 178-192

Ji-yun Qin, Zhen-yuan Jia, Jian-wei Ma, De-ning Song and Li-kun Si

A flexible clustering approach for virtual cell formation considering real-life production factors using Kohonen self-organising map pp. 193-215

D.P. Tambuskar, B.E. Narkhede and Siba Sankar Mahapatra

The linkages between horizontal strategy, person-environment fit and horizontal fit: an empirical study pp. 216-239

Pratima Verma and R.R.K. Sharma

Analysis of maximal covering location-allocation model for congested healthcare systems in user choice environment pp. 240-274

Mahsa Pouraliakbari, Mohammad Mohammadi and Abolfazl Mirzazadeh

Using the knowledge base and fuzzy inference system to estimate the safety factor in calculating the number of the kanban cards pp. 275-287

Farzad Firouzi Jahantigh, Ali Noroozian and Ali Daneshi

Volume 28, issue 1, 2018

Solving stochastic dynamic facility layout problems using proposed hybrid AC-CS-SA meta-heuristic algorithm pp. 1-31

Ghorbanali Moslemipour, T.S. Lee and Y.T. Loong

Prioritising factors for manufacturing growth in India: an analytic network process approach pp. 32-52

Ravindra Ojha and Prem Vrat

GA-based optimisation using RSM in WEDM of Nimonic-90: a nickel-based super alloy pp. 53-69

Vinod Kumar, Kamal Kumar Jangra, Vikas Kumar and Neeraj Sharma

Analysis of damage costs in supply chain systems pp. 70-98

Samir A. Alsobhi, Krishna K. Krishnan, Deepak Gupta and Abdulaziz T. Almaktoom

Developing heuristic algorithms for optimisation of location-allocation of fuel-distribution network pp. 99-116

Jafar Bagherinejad and Maryam Mirzaei

Analysis of a standby redundant system with controlled arrival of failed machines pp. 117-134

Fu-Min Chang, Yu-Tang Lee, Chia-Jung Chang and Chung Yeh

Volume 27, issue 4, 2017

A novel method for ranking fuzzy quantities using center of incircle and its application to a petroleum distribution center evaluation problem pp. 457-484

Seyed Hadi Nasseri, Nemat Allah Taghi-Nezhad and Ali Ebrahimnejad

Life cycle assessment of an aircraft component: a case study pp. 485-499

R. Veeramanikandan, S. Nithish, G. Sivaraj and S. Vinodh

Reliability-based measures for a batch-arrival queue with an unreliable server and delayed repair under randomised vacations pp. 500-525

Jau-Chuan Ke, Kai-Bin Huang and Ching-Chang Kuo

Pedagogical research on understanding and misconceptions of system design pp. 526-556

Rashmi Jain, Anithashree Chandrasekaran and George Elias

Introduction of scope creep life cycle for effective scope creep management in software industries pp. 557-577

K. Lakshmi Madhuri and Suma V.

An integrated approach for fuzzy reliability analysis and resource allocation of a repairable industrial system pp. 578-594

Komal

Volume 27, issue 3, 2017

Application of STAMP methodology in one complex manufacturing system pp. 311-339

Marcelo Santiago De Sousa, Felipe Martins Torres and Ariosto Bretanha Jorge

Simulation modelling and development of analytic hierarchy process-based priority dispatching rule for a dynamic press shop pp. 340-364

Thenarasu Mohanavelu, Rameshkumar Krishnaswamy and Prakash Marimuthu

Systematic evaluation for bottleneck detection methods pp. 365-389

Brian Huff and Mohammed AlMansouri

Scheduling batch processing machines in a no-wait flow shop using ACO to minimise the makespan pp. 390-411

Miguel Rojas-Santiago, Shanthi Muthuswamy, Purushothaman Damodaran and Mario C. Velez-Gallego

The vehicle routing problem with one-dimensional loading constraints pp. 412-426

Junmin Yi, Zhixiong Su and Yihui Qiu

Effect of green supply chain management on production costs, quality and productivity using structural equation modelling pp. 427-441

Fariba Maadanpour Safari and Manouchehr Omidvari

Assembly quality analysis method research of automotive body outer cover panels pp. 442-455

Kuigang Yu and Zhihong Yang

Volume 27, issue 2, 2017

Economic risk assessment of EPC projects using fuzzy TOPSIS approach pp. 161-179

Farzad Firouzi Jahantigh, Behnam Malmir and Behzad Aslani Avilaq

Multiple-model multiple hypothesis probability hypothesis density filter with blind zone pp. 180-195

Tianli Ma, Xinmin Wang and Ting Li

Heuristics for the integrated single machine scheduling and location problem pp. 196-209

S. Akbarinasaji and A. McKendall

Labour-intensive line-cell reconfiguration with cycle time adjustment attributed to changes in situational awareness pp. 210-232

Joshua Prakash, Chuan Choong Yang and Jeng Feng Chin

A simulation case study on supply chain management of a construction firm adopting cloud computing and RFID pp. 233-254

Meral Sahin, Hoo Sang Ko, H. Felix Lee and Marcelo Azambuja

Adoption of green manufacturing in Indian manufacturing industry: a fuzzy analytical hierarchy process approach for inhibitors pp. 255-271

Varinder Kumar Mittal

Some investigations on the relationship between ergonomic and TQM pp. 272-294

Mohammad Asjad and Zulquernain Mallick

The model of role transformation for project managers pp. 295-310

Ting-Chang Lai, Ming-Chun Lai, Chiou-Shuei Wei and Chiu-Chi Wei

Volume 27, issue 1, 2017

Period of processing for multi-entry and multi-outlet non-blocking serial production line pp. 1-27

Peng Li, Yuegang Tao, Bingling Cai, Zilong Zhang and Peng Yang

Kansei engineering-based artificial neural network model to evaluate worker performance in small-medium scale food production system pp. 28-47

Mirwan Ushada, Tsuyoshi Okayama, Atris Suyantohadi, Nafis Khuriyati and Haruhiko Murase

Designing a sustainable supply network by using mathematical programming: a case of fish industry pp. 48-72

Nicolas Clavijo Buritica, John Willmer Escobar and Laura Viviana Triana Sánchez

A grey-based approach for managing uncertainties and performance in automotive supply chains pp. 73-89

Parveen Farooquie, Arif Suhail and Mohd. Nishat Faisal

One vendor-one retailer in vendor managed inventory problem with stochastic demand pp. 90-106

Cahyono Sigit Pramudyo and Huynh Trung Luong

Multivariate Bayesian control chart with estimated parameters pp. 107-121

Chao Tan, Jian Liu and Xing Zhang

Analysis of a flexible commitment contract with two-way penalties pp. 122-160

Nguyen Thi Xuan Hoa and Huynh Trung Luong