Computational Mechanics

Yao, Z. H.; Yuan, M. W.

Computational Mechanics

Z. H. Yao and M. W. Yuan

in Springer Books from Springer

Date: 2009
ISBN: 978-3-540-75999-7
References: Add references at CitEc
Citations:

There are no downloads for this item, see the EconPapers FAQ for hints about obtaining it.

Chapters in this book:

Multiresolution Mechanics for Nano/Micro-Structured Materials: Franck J. Vernerey, Wing Kam Liu, Elisa Budyn, Ji Hoon Kim and Albert To
Rigid Element Concept for Geometric Nonlinear Analysis of Structures Involving Postbuckling Response: Y. B. Yang
Unstructured Mesh Generation and Its Parallelization: Yao Zheng and Jianjun Chen
Material Point Method for Numerical Simulation of Failure Phenomena in Multiphase Porous Media: H. W. Zhang, K. P. Wang and Z. Zhang
The Atomic-Scale Finite Element Method for Post-Buckling of Carbon Nanotubes: A. Y. T. Leung and Xiang Guo
Statistical Two-Scale Method for Strength Prediction of Composites with Random Distribution and Its Applications: Junzhi Cui, X. G. Yu, Fei Han and Yan Yu
A Variational Principle and Numerical Scheme for Microstructural Evolution of Materials Controlled By Lattice Diffusion: Jingzhe Pan
Elastoplastic Micromechanical Damage Mechanics for Composites with Progressive Partial Fiber Debonding and Thermal Residual Stress: J. W. Ju and K. Yanase
Numerical Simulations of Transitional and Turbulent Flows in Plane Mixing Layers: H. D. Ma, H. L. Pan and Q. Wang
3D Numerical Simulation of Self-Propelled Swimming of Bionic Fish School: C. J. Wu and L. Wang
Modelling of Non-Isothermal Non-Newtonian Viscoelastic Flows: X. K. Li, X. H. Han and Q. L. Duan
Applications of Discontinuous Deformation Analysis (DDA) to Rock Engineering: Gen-hua Shi
Upper and Lower Bounds for Numerical Solutions of Elasticity Problems using LC-PIM and FEM: G. R. Liu and G. Y. Zhang
Material Point Method for Impact and Explosion Problems: S. Ma and X. Zhang
Reproducing Kernel Partition of Unity: from Continuum to Quantum: Jiun-Shyan Chen and Wei Hu
SPR — A New Method for Mesh Improvement and Boundary Recovery: Jianfei Liu, Shuli Sun and Yongqiang Chen
Fast Inverse CAE Code for Sheet Metal Forming and Its Relative Technique: Guojun Zheng, Xiangkui Zhang, Yu Wang, Ping Hu, Sibo Hu and Zhikui Lang
Advances in Classical Subspace Iteration Method for Eigenvalue Problem: P. Chen, Q. C. Zhao, W. B. Peng, Y. Q. Chen and M. W. Yuan
Time-Domain BEM Analysis of Cracked Piezoelectric Solids under Impact Loading: Ch. Zhang, F. García-Sánchez and A. Sáez
Radial Basis Function Collocation Method: Alexander H.-D. Cheng
Modelling of Turbulent Flows at LAST, Tsinghua University: S. Fu, S. Y. Huang, Q. G. Meng, C. S. Chen, S. W. Chang, Y. P. Liao, C. W. Huang and C. K. Wang
Molecular Dynamics Simulations of the Fracture Mechanism of Tetrahedral Amorphous Carbon: Qiang Lu, Nigel Marks and Ted Belytschko
Modeling of Fracture Process under Water Pressure in Crack using XFEM: Xiujun Fang, Feng Jin and Chuhan Zhang
Numerical Study on Multi-Crack Fracture Parameters under Impact Loading Based on the Virtual Crack Closure Technique: Yongjie Liu, Xiangguo Zeng and Qingyuan Wang
The Fracture Process Simulation of the Gear Tooth and the Advance of Computational Fracture Mechanics: Shenghua Yang
On Efficient Evaluation of Derivatives of Fracture Parameters using Fractal Finite Element Method: R. M. Reddy and B. N. Rao
An Application of Stochastic Meshfree Method in the Field of Fracture Mechanics: C. O. Arun, B. N. Rao and M. S. Siva Kumar
A Relay-Zone Technique for Computing Dynamic Dislocations: S. Q. Tang, W. K. Liu, E. G. Karpov and T. Y. Hou
On the Interface Elements for Delamination Simulation of Laminated Plates Subject to Low-Velocity Impact: Guangyu Shi
A Perspective on Damage and Failure of Composite Structures based on Innovative Analytical and Testing Methods: J. Xu, A. Askari and O. Weckner
Characterizing the Plastic Strain Localization in Cosserat Media: X. Liu and A. Scarpas
Prediction Fatigue Life of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model: Lijuan Cao and Shouju Li
Simulation of Fatigue Process in FRP Laminates with Local Stress Concentration: Y. J. Guan and Y. T. Wei
Combined Stochastic Diffusion and Mean-Field Model for Grain Growth: Y. G. Zheng, H. W. Zhang and Z. Chen
Numerical Simulation of Dendritic Solidification on Non-Graded Adaptive Cartesian Grids: H. Chen and F Gibou
Model for Czochralski Crystal Growth: Zhong Zeng, Yongxiang Zhang and Jingqiu Chen
Comparison of Higher-Order Numerical Schemes and Several Filtering Methods Applied to Navier-Stokes Equations with Applications to Computational Aeroacoustics (CAA): L. Lai, G. S. Djambazov, C.-H. Lai and K. A. Pericleous
Three-Dimensional Coupling Compact Finite Difference Methods for Navier-Stokes Equations: Li Zhang, D. B. Tang and Y. Z. Yang
The Finite Element Simulation of Turbulent Flow with a Dynamic Eddy Viscosity Model: Feifei Wang and Yongtao Wei
Large Eddy Simulation of Vortex Shedding due to Forced Vibration of Cylinder: Y. G. Bai, D. K. Sun and J. H. Lin
Modelling the Compressibility Effect with Second-Moment Closure: S. Fu and S. Y. Huang
Numerical Simulation of Three Dimensional Turbulent Flow in Double-Suction Centrifugal Pumps: Min Yang, Fujun Wang and Guohui Cong
Direct Numerical Simulation of a Compressible Turbulent Mixing Layer with Combustion Chemical Reactions: Wenbo Miao, Xiaoli Cheng and Qiang Wang
Modelling Particle Deposition in a Turbulent Ribbed Channel Flow: M. A. I. Khan, X. Y. Luo, F. Nicolleau, P. G. Tucker and G. Iacono
Large Eddy Simulation for Compressible Plane Free Shear Layers Transition Process: Handong Ma and Honglu Pan
Three-dimensional Dynamic LES Combined with Free Surface Poisson Equation: Xuelin Tang and Fujun Wang
Assessment of Two Versions of Ghost Fluid Method for 2D Multi-Medium Compressible Flow: Yan Ding and Li Yuan
Development of a Compressible Flow Analysis Code with a Generalized Equation of State: H. Terasaka, S. Obayashi and N. Yamazaki
Numerical Simulation of Electroosmotic Flow through Circular and Triangular Microchannel with Different Aspect Ratios: V. Gnanaraj and V. Mohan
3D Numerical Simulation of Single-Phase Flow in Micro-Channels of the Small Square Cylinders in the Electrolysis Oxygen Generation: Linlin Li and Jili Zhang
Experimental Study on the Parameters That Cause River-Blocking by Debris Flow: Zhixue Guo, Er Huang, Xingnian Liu and Shuyou Cao
A Global Shallow Water Model on the Spherical-Cubic Grid by using CIP/Multi-Moment FVM: C. G. Chen and F. Xiao
Investigation of the Local Morphing’s Influence on the Characteristics of Aerodynamics for Airfoil in Low-Re Flows: J. H. Ran, Z. Q. Liu and P. Bai
High Order Multi-Moment Finite Volume Method and the Applications to Fluid Dynamics: F. Xiao, S. Li and C. G. Chen
Some Computational Issues on Fluid Dynamics in Large-Scale Hydraulic Turbines: F. J. Wang, C. L. Liao, X. L. Tang, J. M. Ma, Y. J. Li and W. Zhao
Effect of Straightening Vane on Hydraulic Performances of Sprinkler by CFD Analysis: H. J. Yan, Y. J. Ou, F. F. Yu and F. J. Wang
Uniform Weighted Compact and Non-Compact Scheme for Shock Entropy Interaction: Peng Xie and Chaoqun Liu
Numerical Simulation of the Evolution of Focusing Shock Wave in Extracorporeal Shock Wave Lithotripsy by Using Space-Time Conservation Element and Solution Element Scheme: Y. X. Zhang, J. Q. Chen, Z. Zeng, C. X. Wei and C. Wen
Numerical Study of Flow Structures and the Intensity of Segmentation of Impinging Jets in Various Y Typed Micro Mixers: Hui Guan, Chuijie Wu and Shantung Tu
Moving Grid-Multigrid Fictitious Boundary Method for the Simulation of Viscous Flow Past Many Moving Disks: Decheng Wan
Mathematical and Numerical Analysis of Thermally Coupled Quasi-Newtonian Flow Obeying a Power Law: Jiang Zhu and Xijun Yu
Numerical Simulation of Traveling Bubble Cavitating Flow in a Francis Turbine: Lingjiu Zhou and Zhengwei Wang
Traffic Jam Formation in Traffic Flow on a Harbor Tunnel: Hongdi He, Weizhen Lu, Liyun Dong and Shiqiang Dai
Area-Load Explanation, Locating and Estimating Min (Max) of BM: G. H. Liu and Y. Zhang
Inelastic Analysis of Steel Frame Structures with the Member Endochronic Model: Shuoying Zhang
Simulation for the Collapse of RC Frame Tall Buildings under Earthquake Disaster: Z. W. Miao, X. Z. Lu, L. P. Ye and Q. L. Ma
Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge: S. N. Huang, X. Z. Lu, L. P. Ye and Y. K. Liu
Estimating Seismic Energy in Frame Structure with Odd Exponent Wavelet: Meiling Xiao, Liaoyuan Ye, Benyu Liu and Sheng Miao
Applications of the Integral Operators Method in Beam-Column Element: Jingzhong Xie
Structural Design of the Large-Span Suspen-Dome: Z. H. Zhang, Q. S. Cao, X. Y. Fu and S. L. Dong
A New Rod Eigenelement and Its Application to Structural Static and Dynamic Analysis: Yufeng Xing and Yang Yang
A New Method for Solving Solid Structures: Jiang Ke
Research on Application of Reduced Order Model in Wind-Induced Vibration of Long-Span Structures: Fangjin Sun, Daming Zhang, Zhixiang Yin and Qikun Cao
Application of Proper Orthogonal Decomposition Method in Wind Field Simulation for Roof Structures: Dajian Han and Jing Li
Mechanical Properties of Super Honeycomb Structures: M. Wang, X. Qiu and X. Zhang
Load Capacity Analysis of Laminated Composite Plates with Delamination under Static Loading: Yuandong Liu and Haoran Chen
Reliability Based Approach to Determine Design Ice Condition for Dynamic Performance Assessment of Jacket Platforms: G. Li, X. Liu and Q. J. Yue
The Application of Vector Form Intrinsic Finite Element Method to Template Offshore Structures: H. -H. Lee, K. -W. Tseng and P. -Y. Chang
Reliable and Efficient Modeling by Adaptive Methods for Structural Mechanics and Its Industrial Applications: B. Tie
A Viscoelastic Analysis of Rubber Pretension Structures: Bin Xu, Xin Zong, Shaorong Yu, Weifeng Li and Zhigen Fan
Structural Dynamics Analysis of “Shenguang-III” Target System: Shaorong Yu, Jun Wang, Xueqian Chen, Shifu Xiao, Bing Xu and Yihui Yin
A Practical Method to Determine Influence Surfaces using Commercial Software: J. Kong
Seismic Response of a Concrete Viaduct Reinforced by Steel Braces: Y. B. Yin and S. M. Sun
Application of Digit Image Processing Technique to the Analysis of Concrete Damage Process: J. Li and X. Wu
Study on the Macro-Meso Constitutive Law of Concrete Material: Qing Zhang and Xiaozhou Xia
3-D FEM Emulation Computation on Surrounding Concrete of Steel Spiral Case Keeping Internal Pressure during Construction: Jianhua Cui and Haidong Su
Modeling of Stresses and Strains in Bonded Concrete Overlays Subject to Differential Volume Changes: Jian Zhou, Guang Ye, Erik Schlangen and Klaas van Breugel
Fiber Beam Element Model for the Collapse Simulation of Concrete Structures under Fire: S. C. Chen, X. Z. Lu, A. Z. Ren and J. J. Jiang
Numerical Tests of Fracture Saturation in Reinforced Concrete Structure: Juanxia Zhang, Chun’an Tang, Xiuyan Zhou and Xianzhang Guo
A Simple Soil Model for Complex Loadings: Zhi-Liang Wang and Fenggang Ma
Research on Design of Model in Shaking Table Test Considering Soil-Structure Interaction: Xiaojun Shi, Qingxia Yue and Jie Li
A Meshfree Particle Method to Simulate Discontinuous Rock Mass: G. W. Ma and X. J. Wang
Rock Block Identification and 3D Simplex Integration: J. S. Song, Y. Ohnishi and S. Nishiyama
Study on Mechanical Effects of Shrub Roots for Slope Protection: X. S. Hu, G. C. Chen, G. R. Li, H. L. Zhu and X. Q. Mao
Numerical Simulation Test on Mechanical Characteristics of Coarse Granular Materials by Discontinuous Deformation Analysis: P. X. Guo and S. Z. Lin
A Numerical Approach for the Simulation of Cementitious Materials: W. G. Yang and Z. Q. Guo
Strength Reduction Method on Stability Analysis of Tunnel: Z. Zhang, C. A. Tang, L. C. Li, T. H. Ma and S. B. Tang
Numerical Simulation and Analyze for Centrifuge Model Tests: L. X. Tang and C. A. Tang
Constitutive Modeling of Advanced High-Strength Steels for Springback Simulation: Z. Cedric Xia
Computational Modelling for Description of Rubber-Like Materials with Permanent Deformation under Cyclic Loading: Z. Q. Guo and L. J. Sluys
FE Realization of a Thermo-Visco-Plastic Constitutive Model using VUMAT in ABAQUS/Explicit Program: C. Y. Gao
Prediction for Mechanical Properties of Core-Shell Particle-filled Polymers via Statistical Two-Scale Method: Fei Han, Junzhi Cui and Yan Yu
Various Formulations for Determining Displacements and Stresses in Wound Rolls: M. L. Liu
The Effective Modulus of Particle Modified Polymer Composites with Imperfect Interface: G. L. Xie, P. Zhang and S. G. Gong
Discussion of Two Crystal Plasticity Models Coupling with Anisotropic Damage for Finite Deformations: M. H. Liu and L. Feng
Global Model for 8-inch Czochralski Silicon Crystal Growth Process: Q. S. Chen and G. Y. Deng
Numerov Calculation of AlxGa1-xN/GaN Heterostructure: K. X. Zhang and J. N. Zhang
A Numerical Implementation of a 3D Crystal Plasticity Model for Directionally Solidified Ni-Based Superalloy: J. F. Nie, X. C. You, Z. Zhuang and X. D. Li
A Three-Layer Model of the Mechanical Behaviour of Blood Vessel Walls: H. Zhang, H. W. Zhang and Y. X. Gu
Field Measurement and Numerical Simulation of Hydraulic Transients for Reversible Pump-Turbine Units with MGV Device: D. Y. Liu, F. Wang, C. Q. Ou, G. H. You and Z. Z. Tan
On the dynamic behaviour of chorded mitral valves: X. Y. Luo, M. Yin, P. Watton and J. Wang
Intensity Field Design for Pistons and Cylinder Heads in the Laser Induced Thermal Loading System: H. W. Song, G Yu, J. S. Tan and J. B. Di
Analysis of Pre-Tightened Bolt Connections under Eccentric Load: Jun Wang, Zhiming Hao, Y. H. Yin, Pingan Shi and Bing Xu
Air Bearing Slider Simulation and Modeling for Hard Disk Drives with Ultra-Low Flying Heights: B. J. Shi, D. W. Shu, B. Gu, M. R. Parlapalli, C. N. Delia and Q. Y. Ng
The Influence of Charged Raindrops on Remote Sensing in Rain: Qinshu He and Yohue Zhou
Application of GIS Technique in Three-Dimensional Slope Stability Analysis: Cheng Qiu, Mowen Xie and Tetsuro Esaki
Back-Calculation of Material Properties of Asphalt Concrete using the APA Test: Yongping Wang and Linbing Wang
Sinulation of Crack Identification in Elastic Solids using Surface Signals: X. D. Wang and G. L. Huang
Parameter Identification Method for Airport Pavement System: H. H. Ge and J. Y. Xu
Inverse Formulation for Geometrically Exact Stress Resultant Shell: Xianlian Zhou and Jia Lu
Pointwise Estimation of Material Parameters for Heterogeneous Nonlinear Hyperelastic Membranes: Computational Development: J. Lu and X. Zhao
Multi-type Sensor Placement Design for Damage Detection: Y. Q. Li, M. S. Zhou, Z. H. Xiang and Z. Z. Cen
Computational Inverse Procedure for Identification of Structural Dynamic Loads: J. Liu and X. Han
Accurate and Efficient Prediction of Acoustical Performance of Noise Barriers against Transport Noise Pollution: S. Z. Peng, L. Cheng, Y. S. Choy and H. M. Sun
Flutter Derivative Identification using Turbulence Modelling: C. Z. Tuo, Y. G. Bai, D. K. Sun, G. Liu and J. H. Lin
A Localized Variational Principle and Hybrid Element Formulas for Fluid-Structure Coupling Harmonic Vibrations: H. D. Su and Y. Y. Huang
Numerical Analyses of Static and Dynamic Aeroelasticity Based on Unstructured CFD/CSD Solver: Guowei Yang, Guannan Zheng and Dawei Chen
Coupled Fluid-Structure Analysis of Explosive Driven Fragmentation of Cylindrical Shell: X. C. Huang
Deformation of an Elastic Thin Plate using ULE in Lateral Flow of Fluid: Y. J. Hao, X. Z. Bai and X. H. Bo
Analysis of High Performance Parallel Algorithms and Developable Environment for Nonlinear Mechanics of Static Structures: Xin Zong, Jun Mo, Demei Zhang and Bin Xu
A Parallel 3D Delaunay Mesh Generation Method Based on Affected Zone: Min-Bin Chen and Chih-Hsueh Yang
Grid Subdivision Algorithm Based on the Young’s Interface Reconstruction Algorithm: J. G. Ning, T. B. Ma, C. Liu and C. Wang
Fully Nonlinear Ship- Wave Computations using Unstructured Mesh: Q. X. Wang
Optimizing Dynamic Responses of Structures using Isight to Integrate NASTRAN: Kailin Jian, Fanghao Xiao and Ying Chen
Integrated Numerical Analysis System for RSS21 Software: (3) GUI of FFB: J. Chen, H. Terasaka, M. Kurihara and Y. Guo
Fit for Purpose? The Effective Use of Numerical Simulation: a Review of Current Status and Future Needs, Quality Assurance, Education and Training: T. Morris and C. F. McCulloch
Element Free Method for Plane Stress Model I Crack with Couple Stress Effect: Minghui Hao, Hai Wu, Xiping Wang and Shenjie Zhou
Discrete Gradient Finite Point Method: Jia Lu and Jing Qian
A Modified Meshless Local Petrov-Galerkin Method for Nearly Incompressible Rubber Materials: D. A. Hu, X. Han and S. Y. Long
A Variational Mesh-Free Method Based on Discretization via Directional Derivatives: Gaolian Liu, Zhiqiang Ye and Bo Chen
The Least-Squares Meshfree Finite Element Method: Bonan Jiang and Guojun Liao
Numerical Modelling of Fracture in Particulate Composites using SPH Method: Y. Q. Chen and S. Kulasegaram
A New SPH Equation Including Variable Smoothing Lengths Aspects and Its Implementation: Hongfu Qiang and Weiran Gao
Heat Transfer Applications of Meshless Local Petrov-Galerkin (MLPG) Method during Plasma Spray: S. C. Wu, H. O. Zhang, G. L. Wang and W. S. Xia
Meshless Local Petrov-Galerkin (MLPG) “Mixed” Approach for Solving Incompressible N-S Equations: L. F. Gao and Z. H. Yao
Meshfree Analysis of Thin Plates using an Improved Stabilized Conforming Integration Method: Dongdong Wang and Jiun-Shyan Chen
Kernel Radial Basis Functions: W. Chen, H. Wang and Q. H. Qin
Lower Bound Shakedown Analysis by Using the EFG Method and Nonlinear Programming: S. S. Chen, Y. H. Liu and Z. Z. Cen
An Efficient Meshless Method for Simulating Wave Motions in Saturated Porous Media: S. L. Chen, Y. X. Li and Z. P. Liao
The Meshless Local Petrov-Galerkin (MLPG) Approach with Couple-Stress: Min Wang and Xiping Wang
Adaptive Meshless LBIEM for the Analysis of 2D Elasticity Problems: H. B. Chen, D. J. Fu and P. Q. Zhang
Meshless Virtual Boundary Method and Its Applications: H. T. Sun
Dual Reciprocity Hybrid Boundary Node Method for Solving Poisson Equations: Yu Miao, Junhai Wang, Y. Z. Sima and Yuanhan Wang
Boundary Element Analysis of the Dual-Cavity Tunneling Seepage: D. Q. Yang, E. Y. Chen and G. P. Zhao
The Boundary Element Analysis of Bloodstream in the Bifurcation Deformity Blood Vessel: H. M. Peng, D. Q. Yang and X. Y. Yang
Boundary Element Method Analysis of Hydrodynamic Characteristics of the Three-Leaf Dislocated Floating-Ring Bearing: P. L. Xing, M. H. Huang and D. Q. Yang
An Effective Technique for Reducing Internal Points in RIBEM for Nonhomogeneous Media: X. W. Gao
Simulation of CNT Composites using Fast Multipole BEM: Z. H. Yao, J. D. Xu and H. T. Wang
Application of Boundary Element Method to Static Fluid-Solid Coupling Problems: X. P. Zheng, B. Wang and Z. H. Yao
An Improved Approach for Computing the Green Functions of the Helmholtz Equation in the 2D Impedance Half Space: Z.-S. Chen and H. Waubke
Recent Advances in Multiscale Simulation of UNCD Strength: L. Shen and Z. Chen
Two-Scale Analysis for Dynamic Coupled Thermoelasticity Problems of Periodical Composite Materials: J. J. Wan, J. Z. Cui and F. Su
Multiscale Analysis and Numerical Simulations for Stability of Incompressible Periodic Flow of Maxwell Fluid: L. Zhang and J. Ouyang
The Multi-Scale Finite Element Computation for Piezoelectricity Problem in a Periodic Domain with the Mixed Boundary Conditions*: Yongping Feng and Mingxiang Deng
Development of Multi-Scale Computation Framework to Investigate the Failure Behavior of the Materials: Z. Zhuang, Z. L. Liu, X. C. You and Y. Guo
Computational Multiscale Analysis for Interfacial Behavior of Bio-Layers and Medical Implants: David Suddaby, Zachary Wise and Jinghong Fan
Magneto-Elastic-Plastic Buckling/Snapping and Bending of Cantilever Ferromagnetic Rectangular Plates: Yuanwen Gao
Three-Dimensional Mixed-Mode Crack Growth Modeling in Electro-Magneto-Thermo-Elastic Coupled Viscoplastic Multiphase Composites by Time-Domain Hypersingular Integral Equation Method: Bojing Zhu and Taiyan Qin
Scale Gap, Scale Invariance and Multiphysical Modeling: L. Q. Cao and J. L. Luo
Computer Simulation on Structures of Single Walled Carbon Nanotubes: Jixin Yang, Xiaoqin Wang and Fan Lei
Buckling Behaviors of Double-Walled Carbon Nanotubes with Abnormal Interlayer Distances: L. Wang, H. W. Zhang and J. B. Wang
Relaxation of a Rotational Defect in a Titanium Nanocylinder: M. S. Wu, K. Zhou and A. A. Nazarov
Pramatic Atomistic Analysis of Nano-scale Metal Plasticity: R. S. McEntire and Y.-L. Shen
Manifestation of Strain Gradients in Nanostructural Vibration: L. Sun, J. Wang and Ray P. S. Han
Highly Accurate Numerical Solutions for Potential Problem and Singular Problem in Arbitrary Plane Domain: Chein-Shan Liu
On Simple and Efficient Shell and Solid Finite Elements with Rotational Degrees of Freedom: Cho W. S. To
Transverse Vibration Analysis of an Arbitrarily-Shaped Membrane by the Weak-Form Quadrature Element Method: H. Zhong and M. Gao
A New Particle Model For Fabric Drap Simulation: K. Y. Sze and X. H. Liu
Harmony Element Method for Time and Space Domain: W. X. Zhong and Q. Gao
Some Recent Advances on the Quadrilateral Area Coordinate Method: Song Cen, Xiaoming Chen, Xiangrong Fu and Yuqiu Long
Method of Volume Coordinates — from Tetrahedral to Hexahedral Elements: Hongguang Li, Song Cen, Yuqiu Long and Zhangzhi Cen
Quadrilateral Axisymmetric Elements Formulated by the Area Coordinate Method: Nanxiang Guan, Song Cen and Xiaoming Chen
A Quadrilateral Membrane Hybrid Stress Element with Drilling Degrees of Freedom: A. P. Wang and Z. S. Tian
Special Hybrid Multilayer Finite Elements for 3-D Stress Analyses around Holes in Laminated Composites: Q. P. Yang and Z. S. Tian
An Investigation of Interlaminar Response for Laminated Composites using a Nonlinear Hybrid Stress Element: Canhui Zhang, Dongdong Wang and Jianlin Zhang
A Hybrid Membrane Element Based on the Hamilton Variational Principle: Wei Ju, Yuqiu Long, Xiangrong Fu and Song Cen
A Symplectic Scheme on Numerical Study for BEC: Yimin Tian, Mengzhao Qin, Yongming Zhang and Tao Ma
A View on Manifold Method Comparing with Fintite Element Method: G. Chen
An Improved Finite Difference Scheme for Solving the Equation of Filtration Type in Porous Textiles with Phase Change Materials: Q.Y. Zhu
C 1 Natural Neighbor Interpolant based on the Extended Delaunay Triangulation: Z. F. Nie, S. J. Zhou, K. Wang and S. L. Kong
Analysis of Sliding Cable Element: Cheng Luo, Xiangrong Fu, Jinsan Ju and Huipeng Liu
Study of the Analytical Trial Functions: Xiangrong Fu, Yuqiu Long, Mingwu Yuan, Song Cen and Xiaoming Chen
Structure-Preserving Finite Element Method on Topologically Nontrivial Domain: Zaijiu Shang and Shuhong Song
Numerical Simulation of Surface Contact and Mixed Lubrication — Deterministic Approach vs. Stochastic Approach: Dong Zhu
Elasto-Plastic Rough Surface Contact Analysis for the Effects of Material Properties, Topographical Characteristics and Load: W. W. Chen, W. Chen, J. Cao, C. Xia, R. Talwar, R. Lederich and Q. Wang
Contact State Analysis using NFIS & SOM: H. Owladeghaffari
Frictional Slide Contact Element for Elastomeric Bearings of Prestressed Shallow Reticulated Shells during Construction: J. C. Xiao, J. Y. Mao and Y. Liu
Application of 3D Coupled Joint Element in Contact Erosion Simulation: Y. L. Luo and H. Peng
Numerical Analysis of Car Disc Brake Squeal Considering Thermal Effects: Lijie Li, Huajiang Ouyang and A. R. AbuBakar
An Efficient Method for Acoustic Response Prediction in the Mid-Frequency Range: W. C. Peng, Z. He and J. Q. Wang
Free Vibration of Liquid-Storage Tanks Based on Bending- Shearing Model: Xuansheng Cheng, Yongfeng Du, Hui Li and Xiaoyu Shi
The Nonlinear Vibration of Axially Moving Beam Impacted by High-Speed Moving Load: Baoquan Guo, Shilin Xie and Xinong Zhang
Transient Analysis of Functionally Graded Materials Plate using Reduced-Basis Methods: Y. H. Huang and X. Han
Nonlinear Vibration and Bifurcation Analysis for a Rotor with Seal and Bearing Excitations: Y. F. Wang, Y. Li and X. Y. Wang
Vibration Control of Honeycomb Sandwich Panel using Multi-Layer Piezoelectric Actuator: Yajun Luq, Shilin Xie and Xinong Zhang
Vibration Analysis of Functionally Graded Piezoelectric Annular Sectorial Plates: G. J. Nie and Z. Zhong
Numerical Analysis for Vibration of Magnetostrictive Actuator: X. C. Shang, L. P. Qin and L. M. Liu
A Practical Solution of the Random Eigenvalue Problems using Factorized Decomposition Technique: Rajib Chowdhury, B. N. Rao and A. Meher Prasad
Research on Virtual Dynamic Test Techniques for Space Vehicles: J. B. Qiu, J. M. Wang and Z. P. Zhang
Study on Mechanism for Line Spectrum Reduction in Nonlinear Vibration Isolation system: Jingjing Wang, Shuyong Liu and Shijian Zhu
Modal Analysis of Transient Ultrasonic Guided Waves in a Cylinder: D. K. Stoyko, N. Popplewell and A. H. Shah
T-Matrix Method of Elastic Wave Scattering on Imperfect Interface: Peijun Wei and Li Zhang
Numerical Study of Wave Propagation and Reflection in Semi-Infinite Long Piezoelectric Cylinders: H. Bai
Analysis of Dielectric Layer PBG Structure Using Precise Integration: H. W. Yang, W. X. Zhong and Y. K. Sui
Numerical Modeling of FMLs Subjected to a Projectile Impact: Z. W. Guan and W. J. Cantwell
Highly Efficient Atmospheric Turbulence Response Analysis of Composite Aircraft Wings Using Pseudo-Excitation Method: X. J. Dai, C. Z. Tuo, D. K. Sun and J. H. Lin
PDF Solution of Nonlinear Stochastic Oscillators Excited by Poisson Pulse with EPC Method: G. K. Er, V. P. Iu, H. T. Zhu and K. P. Kou
Numeric Research of Chaotic Vibration for a Hard Stiffness Nonlinear Rod: J. W. Gao and Z. M. Cai
The Study on the Modifying Structural Dynamic Models Based on Information Fusion: Yiwen Zhu, Yuanqi Cai, Fang Han, Aiqing Ni and Hongqi Wang
Study on Sensitivity Analysis and Shape Optimization of FE-EFG Coupled Method: S. G. Gong, G. L. Xie, J. P. Zhang, S. H. Nie and Y. M. Li
From Truss-Like Continua to Topology Optimum Trusses: K. M. Zhou
Research on Confirmation of Tension Leveller Basic Technological Parameters based on Neural Network and Genetic Algorithm: Kai Liu, Hongzhe Xu, He Gao, Xiaohui Peng and Le Yao
Dynamic Optimization of Gyroscope Rubber Vibration Absorber Based on Genetic Algorithm: Yongtao Wei, Ying Sheng and Xiangguo Zeng
A Variational Procedure for Optimal Design: C. Yu and P. Pedregal
Aerodynamic Optimization of the Arc-Wing Missile: K. Cui and G. W. Yang
Optimization of Dynamic Characteristic of Airbag Landing Impact Attenuation: X. Liu, X. Han and G. L. Wen

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:spr:sprbok:978-3-540-75999-7

Ordering information: This item can be ordered from
http://www.springer.com/9783540759997

DOI: 10.1007/978-3-540-75999-7

Access Statistics for this book

More books in Springer Books from Springer
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().