International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 33, issue 5, 2019

The fuzzy front end of manufacturing technology development pp. 285-302

Mats Ahlskog, Jessica Bruch and Mats Jackson

Creating and sharing knowledge during the unfolding of innovation streams: a social network perspective pp. 303-328

Fanny Simon and Albéric Tellier

Modelling and analysis of supply chain risks in leather industry pp. 329-341

Sundarabaskar Hariharan, Rajmohan Murugesan and A.G. Mahalakshmi

Advantageous and disadvantageous inequality fairness concerns: the impact on the single-vendor single-buyer production-inventory system pp. 342-361

Kaifang Fu, Zhixiang Chen and Hui-Ming Wee

A review on droplet deposition manufacturing - a rapid prototyping technique pp. 362-383

V.S. Rajashekhar, T. Pravin and K. Thiruppathi

Volume 33, issue 3/4, 2019

The state subdivision of public traffic vehicles based on K-means algorithm pp. 133-149

Xiangping Wang, Jing Li and Xiaoshui Shang

Technological innovation as a moderating role in the relationship between managerial incentives and tax avoidance in IT and software industry of China pp. 150-161

Noheed Khan, Songsheng Chen and Danish

Dual commitment and subjective well-being: a report from Chinese manufacturing industry pp. 162-175

Xiangrong Xu and Enhua Hu

Profit allocation in agricultural supply chain considering risk factors pp. 176-188

Haifeng Yao and Xiaoxi Ran

An empirical analysis on the forming mechanism of the innovation capability of service-oriented manufacturing enterprises pp. 189-218

Qi Wu and Weicai Wang

Social capital and its influence on the internationalisation strategy and process of Chinese SME from the manufacturing industry pp. 219-233

Jens Mathis Rieckmann, Hui Wan and Fanchen Meng

Business model of service-driven manufacturing from S-G logic perspective pp. 234-255

Xiaoyan Liu, Zhaoquan Jian, Kwanho Thomas Yeung and Jeff Yeung

Agile approach in multi-criterial decision making pp. 256-267

Lukas Kralik, Roman Jasek, Petr Zacek and Roman Senkerik

Automatic abrasive blasting system for large diameter pipe bends pp. 268-282

Longwang Yue, Kong Fah Tee, Baoguo Liu and Tengfei Feng

Volume 33, issue 1/2, 2019

Effective utilisation of cascade H-bridge multi level inverter integrate social spider optimisation for reduced total harmonics distortion pp. 1-13

S.M. Swamy and M. Marsaline Beno

An equivalent conversion method for dual-armed multi-cluster tool scheduling problems with multi-wafer types pp. 14-36

Zhu Wang, Binghai Zhou, Zhiqiang Lu, Damien Trentesaux and Abdelghani Bekrar

Sintering temperature effects on the properties of stainless steel 316L compact fabricated by metal injection moulding pp. 37-52

Nur Syawanie Manam, Wan Sharuzi Wan Harun, Mohd Halim Irwan Ibrahim, Nur Zalikha Khalil and Mahendran Samykano

A dynamic planning model based on graph theory for product platform and module pp. 53-75

Yongming Wu, Liang Hou, Samuel H. Huang and Rongshen Lai

Microstructural comparison and mechanical properties of stainless steel 316L fabricated by selective laser melting and metal injection moulding processes pp. 76-87

Mohd Faizul Farhan Ahmad Hamidi, Wan Sharuzi Wan Harun, Nur Zalikha Khalil and Mahendran Samykano

A modified column generation heuristic for hybrid flow shop multiple orders per job scheduling problem pp. 88-113

Bing-Hai Zhou and Wen-Long Liu

Dimensions of organisational performance: a review pp. 114-129

Nickson Herbert Odongo, Daoping Wang, Shaldon Leparan Suntu and Obadia Kyetuza Bishoge

Volume 32, issue 6, 2018

Effect of process parameters on the tensile properties of LENS deposited Co-Cr-Mo alloy pp. 509-516

Kedar Mallik Mantrala, Ch. Srinivasa Rao, V.V.S. Kesava Rao and Sk. Abdul Munaf

Investigating the effect of relational capital on supply chain risk and performance pp. 517-532

Zahra Amin Afshar and Safar Fazli

Performance improvement of machining parameters in electrical discharge machining process of tool steel 2714 pp. 533-551

Sameh Habib

Production and preventive maintenance rates control in a failure-prone manufacturing system using discrete event simulation and simulated annealing algorithm pp. 552-564

Sayyed Mohammad Reza Davoodi and Shahab Amelian

Process research of seal ring groove based on magnetic abrasive finishing pp. 565-579

Hong-Jun Quan, An-Yuan Jiao, Zong-Ze Li and Yan Chen

Lean co-creation model analysis for manufacturing industries pp. 580-597

Ashish Shrivastava, Aviral Kothari, Jitendra Achara, Mohit Kumar and Ramdhan Sodani

Finite element analysis of the deformation behaviour of pure aluminium in repetitive corrugation-straightening and constrained groove pressing pp. 598-609

Farhad Rahimi, Bagher Mohammad Sadeghi and Masoud Ahmadi

Volume 32, issue 4/5, 2018

Optimisation of shot peening process for AISI 4140H forged connecting rod using MADM techniques pp. 316-335

A.A. Dounde, Chandrakant Y. Seemikeri and S.G. Kamthe

Experimental investigation and multi objective optimisation of Duplex 2304 drilling operation using evolutionary algorithm pp. 336-357

M. Varatharajulu, G. Jayaprakash, N. Baskar and R. Narayanasamy

Predicting bottlenecks in manufacturing shops through capacity and demand observations from multiple perspectives pp. 358-380

Juan Tang, Bang-yi Li and Zhi Liu

Multi-objective optimisation of EDM process using ANN integrated with NSGA-II algorithm pp. 381-395

Shiba Narayan Sahu and Narayan Chandra Nayak

Quality cost model improvement based on 6 σ management pp. 396-411

Baoguang Bai and Jian Zhang

Benchmarking framework for internal supply chain management: a case study for comparative analysis pp. 412-429

Kailash, Rajeev Kumar Saha and Sanjeev Goyal

An inventory decision-making model considering continuous production and detection of electric energy metering device pp. 430-449

Wenliang Bian, Haifeng Yang, Yao Sun and Yan Xie

Optimisation strategy of online dual-channel supply chain under differentiated products pp. 450-469

Jie Xu, Xiru Yang, Angus Xiao and Lei Chen

Examining the causes of the 'bullwhip effect': a study of the Qinhuangdao Port's coal supply chain pp. 470-487

Hongmei Chen, Haiju Hu and Meimei Yang

Selection model and algorithm of logistics corridor based on the network utility pp. 488-507

Wenliang Bian, Lei Chen, Lina Chuan and Yong Zhao

Volume 32, issue 3, 2018

A conceptual framework linking LM, TQM, QMS, and EMS practices with the SP: assessment of responses from managers of some Malaysian industries pp. 191-214

Amjad Khalili, Md Yusof Ismail, A.N.M. Karim and Mohd Radzi Che Daud

Prioritisation of barriers in implementation of green manufacturing in Indian SMEs through integrated grey-DEMATEL approach pp. 215-236

Piyush Jaiswal and Amaresh Kumar

An empirical investigation on Malaysians' green purchasing behaviour pp. 237-254

Amiruddin Ahamat, Syed Zamberi Ahmad and Rohaini Binti K. Mohd

Energy effectiveness achieved by orienting prototype of a laparoscopic instrument handle using polyjet additive manufacturing technology pp. 255-269

M.P. Sreekanth, Rajesh Ranganathan and C. Vivek

Recycling waste and upcycling people: a new type of environmentally-motivated social enterprise strategy pp. 270-296

Irena Descubes, Tom McNamara and Tony Cragg

Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants pp. 297-311

Haitem Fargani, Wai Ming Cheung and Reaz Hasan

Volume 32, issue 2, 2018

Economic evaluation on container shipping route selection pp. 85-101

Bo Lu, Han Qiao, Yuzhe Zhao, Xianfei Yang, Guowei Hua and Xiaoxu Zhang

An approach based on FMECA methodology for a decision support tool for managing risk in customs supply chain: a case study pp. 102-123

Lamia Hammadi, Abdellah Ait Ouahman, Eduardo Souza De Cursi and Aomar Ibourk

Coordinated decision making on inter-organisational knowledge innovation of project-based supply chain pp. 124-138

Guangdong Wu

Analysing seasonal variation and forecasting the output of beverage industry in Pakistan using Demetra+ pp. 139-161

Liaqat Ali and Iffat S. Chaudhry

The effect on the growth and evolution model of logistics symbiosphere pp. 162-175

Guanglan Zhou, Li Si, Yutao Mo and Jun Hu

A modified Monte Carlo method to study the performance of the roughness models pp. 176-188

Y. Ech-Charqy, H. Gziri and M. Essahli

Volume 32, issue 1, 2018

The cash is in the medium, not in the machine: toward the golden moments of 3D printing pp. 5-15

Steffen Roth

How do fab-spaces enable entrepreneurship? Case studies of 'makers' - entrepreneurs pp. 16-42

Letizia Mortara and Nicolas Parisot

Industrial 3D printing in Italy pp. 43-64

Luca Beltrametti and Angelo Gasparre

New industrial platforms and radical technology foresight: the case of 3D printing in Finland and Europe pp. 65-84

Jari Kaivo-oja, Toni Ahlqvist, Osmo Kuusi, Risto Linturi and Steffen Roth