International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 28, issue 4/5/6, 2014

Creation and evaluation of software teams - a social approach pp. 167-183

Surayne Torres, Yadenis Piñero, Pedro Y. Piñero and Luiz Fernando Capretz

Objective-based multiple attribute decision-making method for plastic manufacturing process selection pp. 184-199

P.L. Ramkumar and D.M. Kulkarni

Review and outlook of work breakdown structure for complex product manufacturing pp. 200-216

Nan Ren, John R. Drake, Yixin Li and April H. Reed

Learning rate of gradient descent multi-dividing ontology algorithm pp. 217-230

Jianzhang Wu, Xiao Yu and Wei Gao

A combination of data analytic and compensatory methodology for material selection in sugar manufacturing industry pp. 231-256

L. Anojkumar and M. Ilangkumaran

IEQMS model: a leveraging mechanism to polarise quality in engineering educational institutions - an empirical study pp. 257-274

A. Pal Pandi, P.V. Rajendra Sethupathi and D. Jeyathilagar

Recruitment, selection, training and performance evaluation at the Portuguese Public Safety Police - repercussions on work satisfaction, motivation and performance pp. 275-305

Mário José Maia Moreira and Carolina Feliciana Machado

Management of remanufacturing - strategic challenges from intellectual property rights pp. 306-335

Maria Elo and Tuomo Kareila

A profile shaft connection technique and its applications in transmission structure pp. 336-348

Li Liu, Wenyou Jia, Dezhang Xu and Renjun Li

Partner selection in a manufacturing virtual enterprise based on intuitionistic fuzzy sets pp. 349-362

Bin Huang and Liang Chen

Energy consumption in relation with buffer design during the pre-build stages of manufacturing system pp. 363-379

Usman Ghani and Nadeem Ahmed Sheikh

Volume 28, issue 1/2/3, 2014

Experimental investigation of ultrasonic assisted pulse electrochemical drilling for INCONEL 718 with rotary tool pp. 4-18

Dayanand S. Bilgi and Pradeep V. Jadhav

Optimisation of ECM process during machining of titanium using quality loss function pp. 19-38

Shirish D. Dhobe, B. Doloi and B. Bhattacharyya

Machining of SiC by ECDM process using different electrode configurations under the effect of pulsed DC pp. 39-56

Sanjay K. Chak and P. Venkateswara Rao

Experimental investigation and parametric analysis of electro chemical discharge machining pp. 57-79

Lijo Paul, Somashekhar S. Hiremath and Jinka Ranganayakulu

Investigations on performance of ECDM process using NaOH and NaNO 3 electrolytes while micro machining soda lime glass pp. 80-93

C.S. Jawalkar, Apurbba Kumar Sharma and Pradeep Kumar

Prospective methodologies to use impact wear for micro/nano finishing of surfaces pp. 94-113

V.S. Sooraj and V. Radhakrishnan

An experimental investigation during finishing of particulate reinforced Al/10 wt% SiC p -MMC on developed AFF setup pp. 114-131

Harlal Singh Mali and Alakesh Manna

A new way of erosion-abrasion hybrid machining using slotted-diamond grinding wheel pp. 132-145

Ravindra Nath Yadav and Vinod Yadava

Modelling and simulation of spark assisted diamond face grinding of tungsten carbide-cobalt composite using ANN pp. 146-163

Ravindra Nath Yadav, Vinod Yadava and G.K. Singh

Volume 27, issue 4/5/6, 2013

Development of chemo-mechanical magnetorheological finishing process for super finishing of copper alloy pp. 130-141

Prabhat Ranjan, R. Balasubramaniam and V.K. Suri

A study of electrochemical magnetic abrasive machining process pp. 142-153

K.B. Judal and Vinod Yadava

Study of electrochemical-mechanical finishing of bevel gears pp. 154-169

J.P. Misra, P.K. Jain, D.K. Dwivedi and N.K. Mehta

Investigation into energy consumption, surface roughness and material removal rate of cylindrical components machined using wire electrical discharge turning process pp. 170-185

Abimannan Giridharan and G.L. Samuel

Optimisation of ultrasonic machining of zirconia bio-ceramics using genetic algorithm pp. 186-197

Somnath Das, B. Doloi and B. Bhattacharyya

Material properties and selection for selective laser sintering process pp. 198-217

Sunil Kumar Tiwari and Sarang Pande

Application of desirability-function and RSM to optimise the multi-objectives while turning Inconel 718 using coated carbide tools pp. 218-237

M. Manohar, Jomy Joseph, T. Selvaraj and D. Sivakumar

Online monitoring of auto correlated linear profiles via mixed model pp. 238-250

Paria Soleimani, Ali Narvand and Sadigh Raissi

Investigations on tool wear and material deposition aspects of TiC coating on aluminium by electro discharge coating process pp. 251-262

Abhishek Das and Neelesh Kumar Jain

Volume 27, issue 1/2/3, 2013

Modelling and evaluation of flank wear progression of coated carbide tools in turning hardened steels pp. 4-17

Satish Chinchanikar and S.K. Choudhury

Correlations between tool displacement and surface roughness in a boring process: an experimental study pp. 18-32

Avinash M. Badadhe, Suresh Y. Bhave and Laxman G. Navale

Prediction of surface roughness using cutting parameters and vibration signals in minimum quantity coolant assisted turning of Ti-6Al-4V alloy pp. 33-46

Vikas Upadhyay, P.K. Jain and N.K. Mehta

Role of build orientation in layered manufacturing: a review pp. 47-73

Mohammad Taufik and Prashant K. Jain

Formation of coating layers in low and high velocity molten hollow particles impact in thermal spray coating deposition process pp. 74-87

Rajesh Kumar Shukla and Arvind Kumar

Experimental investigation and optimisation of process parameters in micro-electrical discharge machining pp. 88-100

J. Jerald, S. Kumanan, S.P. Leo Kumar and H.V. Chandrakar

A study on improving machining characteristics of electrical discharge machining with modified transistor pulse generator pp. 101-111

T. Muthuramalingam and B. Mohan

Simultaneous optimisation of average kerf taper and surface roughness during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile pp. 112-126

Amit Sharma and Vinod Yadava

Volume 26, issue 1/2/3/4, 2012

Development of a leanness monitoring system via RFID: an industrial case study pp. 1-20

Joseph C. Chen, Ye Li and Brett D. Shady

Optimisation of the correlated responses of EDM process using modified principal component analysis-based utility theory pp. 21-38

Rina Chakravorty, Susanta Kumar Gauri and Shankar Chakraborty

Optimisation of welding mechanisms using analytic hierarchy process, technique for order preference by similarity to ideal solution and graph theory and matrix approach pp. 39-55

A.G. Kamble, Siddhartha Gupta, Bhushan Trivedi and Pratik Jangale

Determination of optimal parameters with multi response characteristics of EDM by response surface methodology, grey relational analysis and principal component analysis pp. 56-80

M.K. Pradhan

Solving flexible job-shop scheduling problem using hybrid particle swarm optimisation algorithm and data mining pp. 81-103

S. Karthikeyan, P. Asokan, S. Nickolas and Tom Page

The Mahalanobis-Taguchi system - two steps optimal algorithm for dynamic product design system pp. 104-113

Ching-Lien Huang

Electrical discharge machining of hybrid metal matrix composites by applying Taguchi method pp. 114-136

S. Gopalakannan, T. Senthilvelan and K. Kalaichelvan

Grey-based Taguchi method for optimisation of multiple characteristics in electrochemical deburring process pp. 137-148

M. Singha, S. Sarkar, S. Mitra and A.S. Kuar

A knowledge reusing methodology in the product's lifecycle scenario: a semantic approach pp. 149-160

Enrico Vezzetti

Analysis of cost models and quantification models of customisation degree after VMI strategy implemented in different industries pp. 161-175

Shen-Tsu Wang and Meng-Hua Li

Analysis of fabrication of arrayed micro-rods on tungsten carbide using reverse micro-EDM pp. 176-195

Sachin Mastud, Ramesh K. Singh and Suhas S. Joshi

Service quality performance measurement management in corporate hospitals using analytical hierarchy process pp. 196-212

A. Mohamed Riyazh Khan, P.N. Prasad and Sw. Rajamanoharane

Manufacturing processes of circular arc corrugated sieve plate pp. 213-220

Bin Wang, Weicheng Wu and Guangming Wu