International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 13, issue 2/3/4, 2008

Study on normal grinding force in ultrasonic aided grinding of sintered Nd-Fe-B permanent magnet pp. 114-123

J.H. Zhang, S.F. Ren, Y.J. Hu, Liuling Li and M.G. Xu

Micromachining of bipolar plates used in proton exchange membrane fuel cells pp. 124-145

Mark J. Jackson, Grant M. Robinson and Mike P. Brady

Analytical prediction of stability lobes in high-speed milling and their application to micromilling pp. 146-168

L. Samrajya Lakshmi, V. Vasu, Prasad Krishna, B. Nageswara Rao and S. Rakesh

Soft-pad grinding of 300 mm wire-sawn silicon wafers: finite element analysis with designed experiments pp. 169-186

Jian (Jessie) Wu, Xuekun Sun, Z.J. Pei, X. Jack Xin and Kelli Simmelink

Fabrication and characterisation of nitrogen-doped diamond microtools pp. 187-200

Mark J. Jackson

Analysis of heat affected zone in the micro-electric discharge machining pp. 201-213

Olivier Thao and Suhas S. Joshi

Experimental investigation into electrochemical discharge microdrilling on advanced ceramics pp. 214-225

B.R. Sarkar, B. Doloi and B. Bhattacharyya

Study of WEDM parameter phenomena for microfabrication pp. 226-240

Sadiq M. Alam, Mustafizur Rahman and H.S. Lim

Microgroove pattern machined by excimer laser dragging pp. 241-253

Hong Hocheng and Kuan-Yu Wang

Analysis of edge effects on flexible forming of sheet metal using plasma arc pp. 254-264

Wenbin Wu, Wenji Xu, Zhongying Wang and Jinjin Zhou

Influence of process parameters on joining strength in microplasma arc welding pp. 265-279

Kueng-Hueng Tseng, Min Jou, Yun Chang and Her-Yueh Huang

Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method pp. 280-296

Patil Makarand Ramu and Vinod Yadava

Bulk micromachining for SOI based microsystems using double side XeF 2 etching pp. 297-307

Avinash K. Bhaskar, Muthukumaran Packirisamy and Rama B. Bhat

Parametric analysis of magnetorheological abrasive flow finishing process pp. 308-323

Sunil Jha and Vijay Kumar Jain

Principle and applications of MEMS: a review pp. 324-343

N.P. Mahalik

Review of MEMS metrology solutions pp. 344-359

James F. Nichols, Meghan Shilling and Thomas R. Kurfess

Carbon as a MEMS material: micro and nanofabrication of pyrolysed photoresist carbon pp. 360-375

Chunlei Wang, Rabih Zaouk, Benjamin Y. Park and Marc J. Madou

Volume 13, issue 1, 2008

Manufacturing planning and control technology versus operational performance: an empirical study of MRP and JIT in China pp. 4-29

Zhixiang Chen and Jennifer S. Shang

Modelling information sharing to improve just-in-time purchasing vendor evaluation pp. 30-54

James T. Ding and Rohana J. Karunamuni

The cross-functional coordination between operations, marketing, purchasing and engineering and the impact on performance pp. 55-77

Amelia S. Carr, Hale Kaynak and Senthil Kumar Muthusamy

Coordinating pricing and inventory decisions under reference price effects pp. 78-94

Timothy L. Urban

AI-based project risk management process for a kind of manufacturing alliance pp. 95-110

Hongyi Cao

Volume 12, issue 4, 2007

The effect of margin guarantees on pricing and production pp. 314-326

Timothy L. Urban

The constraints of the valuation distribution for solving a class of games by using a best response algorithm pp. 327-341

Gangshu Cai, Jie Zhong and Peter R. Wurman

The impact of ERP implementation on business performance – an integrated investigation model pp. 342-359

Huang Shaio-Yan, Lin Ching-Wen, Wong Seng-Lee and Tsai Ming-Chun

Development of an internet retail value chain model for electronic business pp. 360-383

June Wei, Walaipan Kesthong, Lai C. Liu and Kai S. Koong

A three-stage field service management model for effective post-sales service supply chain management pp. 384-404

Stephen C. Shih

Volume 12, issue 1/2/3, 2007

Laser processing of high performance grinding wheels pp. 3-24

Mark J. Jackson, Grant M. Robinson and Xun Chen

Microgrinding force predictive modelling based on microscale single grain interaction analysis pp. 25-38

Hyung Wook Park, Steven Y. Liang and Rui Chen

Mechanical design of high performance grinding wheels pp. 39-59

Mark.J. Jackson

Advanced grinding of titanium aluminides pp. 60-71

Fritz Klocke, Christoph Zeppenfeld and Zwi Nachmani

Thermal analysis of grind-hardening process pp. 72-92

Konstantinos Salonitis and George Chryssolouris

Economical aspects of profiling diamond-grinding wheels pp. 93-107

Eckart Uhlmann, Frank Sroka and Christoph Hubert

Development of a new cutting fluid delivery system for creepfeed grinding pp. 108-126

Rishad A. Irani, Robert J. Bauer and Andrew Warkentin

Development of ultra-precision machining system for small lens mould pp. 127-138

Li Junqi, Liu Qing, Fumio Nakamura and Takeo Nakagawa

Indirect measurement of grinding wheel run-out using acoustic emission pp. 139-154

Thomas R.A. Pearce, David C. Fricker and Alan Speight

Interaction of process and machine during high-performance grinding: towards a comprehensive simulation concept pp. 155-170

Peter Herzenstiel, Robin C.Y. Ching, Sarah Ricker, Andreas Menzel, Paul Steinmann and Jan C. Aurich

Development of a dressing monitoring system through artificial intelligence and acoustic maps for high performance grinding pp. 171-183

J.F.G. Oliveira, A.P.S. Braga and A.C.P.L.F. Carvalho

Mechanical and thermal behaviours of grinding acoustic emission pp. 184-199

Xun Chen, James Griffin and Qiang Liu

Grinding titanium aluminide: subsurface damage pp. 200-224

Wes Stone and Thomas R. Kurfess

Coolant and oil mist reduction in grinding processes pp. 225-235

Pei-Lum Tso and Rex Huang

Study on surface grind-hardening of SKD-11 hardened steel pp. 236-245

Ming Chen, X.K. Li and P. Yang

Laser dressing of resin-bond diamond grinding wheel pp. 246-258

Xuyue Y. Wang, R.K. Kang, W.J. Xu, L.J. Wang and D.M. Guo

Using the size effect of specific energy in grinding for work hardening pp. 259-269

Ekkard Brinksmeier and Nicolas Bleil

The role of crystallographic orientation on the forces generated in ultra-precision grinding of anisotropic materials such as monocrystalline silicon pp. 270-283

Eric R. Marsh, Jeremiah A. Couey, R. Ryan Vallance and Allen Y. Yi

Rotary ultrasonic machining of silicon carbide: designed experiments pp. 284-298

Nikhi J. Churi, Z.J. Pei, Dustin C. Shorter and Clyde Treadwell

Grinding force modelling: combining dimensional analysis with response surface methodology pp. 299-310

Mohammed Alauddin, L.C. Zhang and Mohammed S.J. Hashmi

Volume 11, issue 3/4, 2007

A visualised manufacturing information system for mass customisation pp. 278-295

Qingjin Peng and Chunsheng Yu

A web-based product portfolio decision support system pp. 296-314

Yiyang Zhang and Jianxin (Roger) Jiao

Using model engineering for the criticality analysis of reconfigurable manufacturing systems architectures pp. 315-337

Florent Frizon De Lamotte, Pascal Berruet and Jean-Luc Philippe

The integration of manufacturing systems using visualised CAPP for agile manufacturing pp. 338-354

Qingjin Peng and Chulho Chung

An integrated method for multiobjectives cell formation in cellular manufacturing systems pp. 355-372

Bin Hu, Mingyuan Chen and F.M. Defersha

Building an adaptive manufacturing enterprise for the Hong Kong watchmaking industry pp. 373-388

Hamid Noori, W.B. Lee and Francis K.H. Lau

Manufacturing scheduling in decentralised holonic systems using artificial intelligence techniques pp. 389-410

Radu F. Babiceanu and F. Frank Chen

Framework for the dynamic scheduling of complex job shops pp. 411-425

Esther Alvarez and Fernando Diaz

Volume 11, issue 2, 2007

Value chain modelling using system dynamics pp. 135-156

Thomas Speller, Luis Rabelo and Albert Jones

Software agents-enabled systems coalition for integrated manufacturing processes and supply chain management pp. 157-173

Shaw C. Feng, Heli Helaakoski, Harri Haapasalo and Janne Kipina

AIDEA: a methodology for supplier evaluation and selection in a supplier-based manufacturing environment pp. 174-192

Teresa Wu, Dan Shunk, Jennifer Blackhurst and Rajendra Appalla

Automatic setup planning: current state-of-the-art and future perspective pp. 193-208

Nuo Xu, Samuel H. Huang and Y. Kevin Rong

Intelligent planning and control of manufacturing supply chains in virtual enterprises pp. 209-227

Dmitry A. Ivanov, Alexander V. Arkhipov and Boris V. Sokolov

A novel function block based integration approach to process planning and scheduling with execution control pp. 228-250

Lihui Wang, Qi Hao and Weiming Shen

Solving multi-objective cell design problem: an evolutionary genetic algorithm approach pp. 251-273

L.N. Pattanaik, P.K. Jain and N.K. Mehta

Volume 11, issue 1, 2007

Manufacturing strategy and innovation in indigenous and foreign firms: an international study pp. 3-27

Deirdre Crowe, Alessandra Vecchi, Louis Brennan and Paul Coughlan

Strategic deployment of specialised testing and remanufacturing in a global high-tech supply chain pp. 28-52

Jarrod Goentzel, Lou Manzione, Richard Pibernik, Joseph Pruett and Brett Thiessen

Learning and technology management in an international partnership: Honda of Japan and Hero of India pp. 53-76

R.D. Pathak, Zafar Husain, Professor Sushil and Danny Samson

Shifts in manufacturing: an illustrative study on passenger car production location pp. 77-97

Erik J. De Bruijn and Harm-Jan Steenhuis

Automation strategies: existing theory or ad hoc decisions? pp. 98-114

Mats Winroth, Kristina Safsten and Johan Stahre

International manufacturing in/divestment strategy: Flextronics in the Czech Republic pp. 115-132

Pavel Strach and Andre M. Everett