International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 17, issue 4, 2009

Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V pp. 327-336

Erween A. Rahim and Safian Sharif

Developing and implementing statistical process control tools in a Jordanian company pp. 337-344

R.H. Fouad and Salman D. Al-Shobaki

Determining optimum EDM parameters in drilling a small hole by Taguchi method pp. 345-352

Ahmad Razlan Yusoff, Zakri Ghazalli and Hazami Che Hussain

Lean manufacturing concept: the main factor in improving manufacturing performance – a case study pp. 353-363

N. Zakuan and M.Z. Mat Saman

Precision microfinishing by electro-chemical honing pp. 364-372

A.K. Dubey, H.S. Shan and N.K. Jain

Experimental study on machining of titanium alloy (Ti64) by CVD and PVD coated carbide inserts pp. 373-385

S. Ramesh, L. Karunamoorthy, V.S. Senthilkumar and K. Palanikumar

Experimental study of effect of surface roughness of blank diameter on external threads pp. 386-395

P.S. Chauhan and K.C. Arora

A consensus on critical success factors for enterprise resource planning systems implementation: the experience of Malaysian firms pp. 396-407

S.M. Jafari, M.R. Osman, M.Y. Rosnah and S.H. Tang

Study on rock-drilling using PDC bits for the prediction of torque and rate of penetration pp. 408-418

R.S. Jadoun

Laser and arc weld methods for direct metal deposition of Waspaloy pp. 419-425

N.I.S. Hussein, I.R. Pashby and D.G. McCartney

Study of out-of-roundness (OOR) of holes in ceramics by USD process using Taguchi's methodology pp. 426-436

R.S. Jadoun

Cost of quality for an automotive industry: a survey and findings pp. 437-452

H.K. Sim, Mohamed Khaled Omar, Y.J. Kong Jackie and C.S. Bong

Volume 17, issue 3, 2009

Feedrate scheduling and jerk control algorithm for high-speed CNC machining pp. 216-231

Daping Wan, ShiLong Wang, CaiChao Zhu and Fanming Meng

Rapid design of tool-wear condition monitoring systems for turning processes using novelty detection pp. 232-245

Abdulrahman F. Al-Azmi, Amin Al-Habaibeh and John Redgate

Neural network adaptive control for machining process based on generalised entropy square error and wavelet analysis pp. 246-260

XingYu Lai, ChunYan Yan and BangYan Ye

The development of a probing system for investigating friction generated acoustics pp. 261-273

Tristan Tyler and Eugene Lai

Research on a new type mechanism to lock and unlock space borne appendages pp. 274-288

Zong Quan Deng, Bing Hui Wu, Xiang Wu and Hui Fang Zhang

Optimal pricing and advertising competition in two supply chains with deterministic demand pp. 289-314

Zhongkai Xiong and Jiajia Nie

Adaptive control for a class of non-linear systems using fuzzy logic based on motion controller pp. 315-326

Kai Xue, Ping Wang and Wende Zhao

Volume 17, issue 1/2, 2009

Reconfigurable manufacturing systems: meeting the challenges of a dynamic business paradigm pp. 1-4

Charu Chandra and Janis Grabis

Configurable supply chain: framework, methodology and application pp. 5-22

Charu Chandra and Janis Grabis

Structure dynamics control-based framework for adaptive reconfiguration of collaborative enterprise networks pp. 23-41

Dmitry A Ivanov, Boris V Sokolov and Joachim Kaeschel

A stochastic programming approach to design the production system flexibility considering the evolution of the part families pp. 42-67

Tullio Tolio and Anna Valente

A control design strategy of a reconfigurable manufacturing system pp. 68-81

N.H. Ben Fong and Robert H. Sturges

Dynamic modelling of reconfigurable manufacturing planning and control systems using supervisory control pp. 82-102

Ahmed M. Deif and Waguih H. ElMaraghy

A simulated annealing algorithm for dynamic system reconfiguration and production planning in cellular manufacturing pp. 103-124

Fantahun M. Defersha and Mingyuan Chen

Production planning of reconfigurable manufacturing systems with stochastic demands using Tabu search pp. 125-148

Morteza Abbasi and Mahmoud Houshmand

Layout configuration selection for reconfigurable manufacturing systems using the fuzzy AHP pp. 149-165

M. Reza Abdi

BTO supply chain configuration via agent-based negotiation pp. 166-183

Alexander Smirnov, Nikolay Shilov and Alexey Kashevnik

Developing taxonomy and model for security centric supply chain management pp. 184-212

Xiangyang Li, Charu Chandra and Jiun-Yan Shiau

Volume 16, issue 4, 2009

Creating a New Product Development capability: the organisational enablers for moving up the value chain pp. 319-342

Hannah Noke and Zoe Radnor

Manufacturing bidirectional data flows in advanced collaborative CAD/CAM/CNC chains. Case study: manufacturing traceability in STEP-NC pp. 343-360

Julio Garrido Campos and Luis Rodriguez Miguez

The importance of locally commanded design for the consolidation of local supply chain: the concept of design headquarters pp. 361-376

Mario Sergio Salerno, Roberto Marx, Mauro Zilbovicius and Ana Valeria Carneiro Dias

A modelling approach for outsourcing decisions in Supply Chain Management pp. 377-397

Navin K. Dev, Sanjeev Swami and Rahul Caprihan

Strategy for capacity management of batch constrained heat treatment operations in the manufacture of multiproduct families pp. 398-416

C.F. Oduoza

An ISM approach to analyse interaction between barriers of transition to Flexible Manufacturing System pp. 417-438

Tilak Raj, Ravi Shankar and Mohammed Suhaib

Volume 16, issue 3, 2009

The role of the operational network in responsive order processing pp. 181-196

Gera A. Welker and Jacob Wijngaard

Approaches to mass customisation: an empirical replication pp. 197-214

Daniel Vazquez-Bustelo

Marketing, manufacturing and logistics: an empirical examination of their joint effect on company performance pp. 215-233

Krisztina Demeter and Krisztina Kolos

Defining the path to value innovation pp. 234-249

Paul Coughlan and Mary Ann Fergus

Packaging as AIDS for implementing Information and Communications Technologies (ICTs): adoption in the Spanish food sector pp. 250-264

Jesus Garcia-Arca and J. Carlos Prado-Prado

From failure to success: an investigation into managers' criteria for assessing the outcome of IT projects pp. 265-282

Elmar Kutsch and Harvey Maylor

Manufacturing competence: a key to successful supplier integration pp. 283-299

Robin Von Haartman and Lars Bengtsson

Production management and Supply Chain Management in a global context pp. 300-317

Ralph Riedel and Egon Mueller

Volume 16, issue 1/2, 2009

An integrated new product introduction performance measurement system: an example in notebook computer industry pp. 3-21

Dongliang Daniel Sheu and P.K. Hung

A parallel hybrid ant colony optimisation approach for job-shop scheduling problem pp. 22-41

Haipeng Zhang and Mitsuo Gen

Real-time buffer management method for DBR scheduling pp. 42-57

Kiyun Woo, Soonyoung Park and Shigeru Fujimura

A random key-based genetic algorithm for AGV dispatching in FMS pp. 58-75

Lin Lin and Mitsuo Gen

A hybrid approach of data mining and genetic algorithms for rehabilitation scheduling pp. 76-100

Chen-Fu Chien, Yi-Chao Huang and Chih-Han Hu

Modelling and scheduling preventative maintenance in semiconductor manufacturing industry with MAs pp. 101-126

Jie Gao, Mitsuo Gen and Linyan Sun

Multiobjective hybrid genetic algorithm for quay crane scheduling in berth allocation planning pp. 127-146

Chengji Liang, Lin Lin and Jungbok Jo

Integrated scheduling using genetic algorithm with quasi-random sequences pp. 147-165

Azuma Okamoto, Mitsuo Gen and Mitsumasa Sugawara

A new solution method for joint replenishment problem pp. 166-175

Myungryun Yoo and Lin Lin