International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 32, issue 6, 2018

Effect of process parameters on the tensile properties of LENS deposited Co-Cr-Mo alloy pp. 509-516

Kedar Mallik Mantrala, Ch. Srinivasa Rao, V.V.S. Kesava Rao and Sk. Abdul Munaf

Investigating the effect of relational capital on supply chain risk and performance pp. 517-532

Zahra Amin Afshar and Safar Fazli

Performance improvement of machining parameters in electrical discharge machining process of tool steel 2714 pp. 533-551

Sameh Habib

Production and preventive maintenance rates control in a failure-prone manufacturing system using discrete event simulation and simulated annealing algorithm pp. 552-564

Sayyed Mohammad Reza Davoodi and Shahab Amelian

Process research of seal ring groove based on magnetic abrasive finishing pp. 565-579

Hong-Jun Quan, An-Yuan Jiao, Zong-Ze Li and Yan Chen

Lean co-creation model analysis for manufacturing industries pp. 580-597

Ashish Shrivastava, Aviral Kothari, Jitendra Achara, Mohit Kumar and Ramdhan Sodani

Finite element analysis of the deformation behaviour of pure aluminium in repetitive corrugation-straightening and constrained groove pressing pp. 598-609

Farhad Rahimi, Bagher Mohammad Sadeghi and Masoud Ahmadi

Volume 32, issue 4/5, 2018

Optimisation of shot peening process for AISI 4140H forged connecting rod using MADM techniques pp. 316-335

A.A. Dounde, Chandrakant Y. Seemikeri and S.G. Kamthe

Experimental investigation and multi objective optimisation of Duplex 2304 drilling operation using evolutionary algorithm pp. 336-357

M. Varatharajulu, G. Jayaprakash, N. Baskar and R. Narayanasamy

Predicting bottlenecks in manufacturing shops through capacity and demand observations from multiple perspectives pp. 358-380

Juan Tang, Bang-yi Li and Zhi Liu

Multi-objective optimisation of EDM process using ANN integrated with NSGA-II algorithm pp. 381-395

Shiba Narayan Sahu and Narayan Chandra Nayak

Quality cost model improvement based on 6 σ management pp. 396-411

Baoguang Bai and Jian Zhang

Benchmarking framework for internal supply chain management: a case study for comparative analysis pp. 412-429

Kailash, Rajeev Kumar Saha and Sanjeev Goyal

An inventory decision-making model considering continuous production and detection of electric energy metering device pp. 430-449

Wenliang Bian, Haifeng Yang, Yao Sun and Yan Xie

Optimisation strategy of online dual-channel supply chain under differentiated products pp. 450-469

Jie Xu, Xiru Yang, Angus Xiao and Lei Chen

Examining the causes of the 'bullwhip effect': a study of the Qinhuangdao Port's coal supply chain pp. 470-487

Hongmei Chen, Haiju Hu and Meimei Yang

Selection model and algorithm of logistics corridor based on the network utility pp. 488-507

Wenliang Bian, Lei Chen, Lina Chuan and Yong Zhao

Volume 32, issue 3, 2018

A conceptual framework linking LM, TQM, QMS, and EMS practices with the SP: assessment of responses from managers of some Malaysian industries pp. 191-214

Amjad Khalili, Md Yusof Ismail, A.N.M. Karim and Mohd Radzi Che Daud

Prioritisation of barriers in implementation of green manufacturing in Indian SMEs through integrated grey-DEMATEL approach pp. 215-236

Piyush Jaiswal and Amaresh Kumar

An empirical investigation on Malaysians' green purchasing behaviour pp. 237-254

Amiruddin Ahamat, Syed Zamberi Ahmad and Rohaini Binti K. Mohd

Energy effectiveness achieved by orienting prototype of a laparoscopic instrument handle using polyjet additive manufacturing technology pp. 255-269

M.P. Sreekanth, Rajesh Ranganathan and C. Vivek

Recycling waste and upcycling people: a new type of environmentally-motivated social enterprise strategy pp. 270-296

Irena Descubes, Tom McNamara and Tony Cragg

Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants pp. 297-311

Haitem Fargani, Wai Ming Cheung and Reaz Hasan

Volume 32, issue 2, 2018

Economic evaluation on container shipping route selection pp. 85-101

Bo Lu, Han Qiao, Yuzhe Zhao, Xianfei Yang, Guowei Hua and Xiaoxu Zhang

An approach based on FMECA methodology for a decision support tool for managing risk in customs supply chain: a case study pp. 102-123

Lamia Hammadi, Abdellah Ait Ouahman, Eduardo Souza De Cursi and Aomar Ibourk

Coordinated decision making on inter-organisational knowledge innovation of project-based supply chain pp. 124-138

Guangdong Wu

Analysing seasonal variation and forecasting the output of beverage industry in Pakistan using Demetra+ pp. 139-161

Liaqat Ali and Iffat S. Chaudhry

The effect on the growth and evolution model of logistics symbiosphere pp. 162-175

Guanglan Zhou, Li Si, Yutao Mo and Jun Hu

A modified Monte Carlo method to study the performance of the roughness models pp. 176-188

Y. Ech-Charqy, H. Gziri and M. Essahli

Volume 32, issue 1, 2018

The cash is in the medium, not in the machine: toward the golden moments of 3D printing pp. 5-15

Steffen Roth

How do fab-spaces enable entrepreneurship? Case studies of 'makers' - entrepreneurs pp. 16-42

Letizia Mortara and Nicolas Parisot

Industrial 3D printing in Italy pp. 43-64

Luca Beltrametti and Angelo Gasparre

New industrial platforms and radical technology foresight: the case of 3D printing in Finland and Europe pp. 65-84

Jari Kaivo-oja, Toni Ahlqvist, Osmo Kuusi, Risto Linturi and Steffen Roth

Volume 31, issue 5, 2017

Prediction model for telecom postpaid customer churn using Six-Sigma methodology pp. 387-401

Manish Bhargava, Awadhesh Bhardwaj and A.P.S. Rathore

Modelling, analysing and improving the revenue sharing contract in a one vendor-multi retailer supply chain based on the Stackelberg game theory pp. 402-423

Hasan Rasay and Yahia Zare Mehrjerdi

Removing the problem of locking not good in assembly of lever combination switch using continuous improvement process pp. 424-435

Anil Kumar

Joint pricing and lot-sizing policy for deteriorating items with price and stock dependent demand rate and shortage pp. 436-459

Guiping Li

Study on the sticking materials on tools in micromilling of single crystalline silicon pp. 460-471

Xiao Cheng, X.H. Yang, G.M. Zheng, R.F. Xu and L. Li

Analysis on abrasive waterjet cutting of glazed vitreous tiles using Taguchi-based RSM pp. 472-489

M. Santhanakumar, R. Adalarasan and M. Rajmohan

Volume 31, issue 4, 2017

Finite element analysis of a taper U-shape in the U-bending process pp. 275-287

Wiriyakorn Phanitwong and Sutasn Thipprakmas

Finite element analysis of crowbarring effect during electromagnetic forming pp. 288-299

Chandrahas Patel and Sachin Dnyandeo Kore

Criterion on enclosed die forging with a double-action link-type hydraulic die set pp. 300-313

Mansoo Joun, Byoungyoon Jun and Hotae Jin

Investigation of magnetic abrasive finishing using unbonded magnetic abrasives with double pole arrangement pp. 314-326

K. Naveen, Vignesh V. Shanbhag, N. Balashanmugam and Prakash Vinod

A fast and high-smooth velocity planning method for high-speed CNC machine tools pp. 327-343

Libing Zhang, Ting Wu and Fengli Huang

Parametric analysis on plastic deformation of materials during ultrasonic spot welding with different anvil geometries pp. 344-361

Mantra Prasad Satpathy and Susanta Kumar Sahoo

Personalisation management in supply networks: an empirical study within the footwear industry pp. 362-386

Laura Macchion, Pamela Danese, Rosanna Fornasiero and Andrea Vinelli

Volume 31, issue 1/2/3, 2017

Understanding stages of supply network emergence in technology commercialisation pp. 4-36

Tomás Seosamh Harrington and Jagjit Singh Srai

A framework for aligning the supply chain throughout a radical product innovation life cycle pp. 37-61

Matthias Parlings and Katja Klingebiel

Dynamic capabilities: taking an emerging technology perspective pp. 62-81

Stephen A. McLaughlin

Mapping industrial systems - a supply network perspective on enabling technologies, processes and actors pp. 82-99

Jagjit Singh Srai

Industrial system dynamics for environmental sustainability: a case study on the UK medical technology sector pp. 100-132

Mukesh Kumar, Tomás Seosamh Harrington, Jagjit Singh Srai and Yuto Minakata

Configuration of supply chains in emerging industries: a multiple-case study in the wave-and-tidal energy industry pp. 133-152

Øyvind Bjørgum and Torbjørn H. Netland

Recorded music supply network reconfiguration: the dual effect of digital technology pp. 153-175

Davi Nakano and Afonso Fleury

The evolution and transformation of industrial clusters: a conceptual model pp. 176-191

Lise Lillebrygfjeld Halse

Collaborative networks as incubators of dynamic virtual organisations: a case study of the emerging MAP sector pp. 192-216

João M. Vilas-Boas Da Silva and Isabel Duarte De Almeida

An extended framework for supply chain risk management: incorporating the complexities of emerging industries and large-scale systems pp. 217-254

Laird Burns

Mitigating risk in global supplies to the maritime industry pp. 255-272

Per Engelseth