International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 25, issue 4, 2012

Development of a design structure matrix partitioning method towards effective design collaboration pp. 177-190

Zhixin Yang, Jie Zhou, Chao Deng and Xin-yu Shao

Improved process performance in new product development of optical communications manufacturing by the integration of DFSS and ANP pp. 191-200

Wen-Tsann Lin, Shen-Tsu Wang, Chen-Hsang Hwang, Meng-Hua Li and Yu-Hsiu Cheng

Construct method of predicting satisfaction model of customer requirements based on product technical characteristics pp. 201-212

Xiaoan Yang, Hongkui Cao, Huifen Liu and Qian Deng

EOQ principle analysis of benefit consistency of supply and demand based on comprehensive cost of quality pp. 213-223

Yanlong Cao, Kui Zhao, Jiangxin Yang, Jiayan Guan and Bo Li

Implementation of integrated automatic control system of copper smelter based on bath smelting technique pp. 224-236

Chen Ye

Omnidirectional MEMS inertial switch pp. 237-247

Shuangjie Liu, Yongping Hao and Wei Wang

Investigation into the rotary ultrasonic face milling of K9 glass with mechanism study of material removal pp. 248-266

Chenglong Zhang, Pingfa Feng, Jianfu Zhang, Zhijun Wu and Dingwen Yu

Volume 25, issue 1/2/3, 2012

Multi response optimisation of turning operation parameters on Al-Cu/TiB 2 in-situ metal matrix composites using desirability function pp. 1-18

P. Senthil, T. Selvaraj, G. Kannan and R. Jeyapaul

A new computational method to solve fully fuzzy linear systems for negative coefficient matrix pp. 19-32

Amit Kumar, Neetu Babbar and Abhinav Bansal

Ergonomic assessment of taxicabs using participatory ergonomic intervention approach among Southwestern Nigerian drivers pp. 33-44

Ayodele Samuel Onawumi and Emmanuel Babajide Lucas

Investigation of comfort level and passenger seat design (side lower berth) in sleeper class coaches in Indian trains: an exploratory study pp. 45-59

L.P. Singh

Improvement in grinding of composite ceramic by using cryogenic cooling technique pp. 60-77

Sanjay Kumar Soni, Vijayender Singh, Amiya Kumar Sahoo and Saurabh Ghosh

Optimisation of multiple response characteristics in orbital electro discharge machining of Inconel 718 using Taguchi's loss function pp. 78-94

Harshit K. Dave, Keyur P. Desai and Harit K. Raval

Thrust force evaluation in drilling medium density fibre (MDF) panels using design of experiments pp. 95-112

S. Prakash, K. Palanikumar and A. Krishnamoorthy

Optimisation of turning parameters of Inconel 718 alloy using RSM pp. 113-134

M. Aruna and V. Dhanalakshmi

Optimal selection of machining datum and machining tolerance allocation through tolerance charting pp. 135-160

M. Thilak, K. Sivakumar and G. Jayaprakash

Optimisation of process parameters for gap current in wire electrical discharge machining pp. 161-175

Rohit Garg and Hari Singh

Volume 24, issue 1/2/3/4, 2011

Optimisation of multiple performance characteristics in abrasive jet machining using grey relational analysis pp. 4-22

Bharat Chandra Routara, B.K. Nanda, Ashok Kumar Sahoo, D.N. Thatoi and B.B. Nayak

Parametric analysis and a soft computing approach on material removal rate in electrochemical discharge machining pp. 23-39

Jinka Ranganayakulu, Somashekhar S. Hiremath and Lijo Paul

Experimental investigation on dry EDM using helium gas dielectric pp. 40-56

P. Govindan, Rahul Agrawal and Suhas S. Joshi

Some anomalies in the experimental results of EDM pp. 57-70

K. Buschaiah, P. Laxminarayana and V.S.R. Murti

Investigation on the effect of spark gap in dry µ-electro discharge machining of SiC-10BN nano-composite pp. 71-87

Goutam Paul, Mitun Das, S. Ghatak, S. Sarkar, Nagahanumaiah and S. Mitra

Parametric optimisation of surface roughness on wire-EDM using Taguchi method pp. 88-107

Kapil Kumar, Akshay Dvivedi and Sudhir Kumar

Optimisation of cut qualities during pulsed Nd:YAG laser cutting of SUPERNI 718 thin sheet for straight profile pp. 108-123

Amit Sharma and Vinod Yadava

Parametric analysis of Nd:YAG laser marking on ceramics pp. 124-138

Josephine Peter, B. Doloi and B. Bhattacharyya

A methodology for measuring product innovation: a case study for a manufacturing system pp. 139-152

Mustafa Batuhan Ayhan and Ercan Oztemel

A comprehensive framework for physical evaluation of manual material handling tasks pp. 153-166

Ratri Parida and Pradip Kumar Ray

Maximising return on investment (ROI) for pharmaceutical production pp. 167-181

Sameh A. Ibrahim and Noha A. Mostafa

Occupational health hazards in small scale steel manufacturing industries: a case study pp. 182-192

Jasgurpreet Singh Chohan and Paramjit Singh Bilga

Volume 23, issue 3/4, 2011

Manufacturing cost estimation for steel product based on consumption chain: a case study in China pp. 137-156

Hao Zhang, Shilun Ge and Junmin Wu

Function and length scale integration in innovative products - technical solutions and new organisational models pp. 157-178

Samuel Bigot, Roussi Minev, Stefan Dimov and Todor Dobrev

Cycle time simulation study for cluster tool operation in IC fabrication pp. 179-192

Amit Kumar Gupta, Appa Iyer Sivakumar and Peter Lendermann

Shop floor manufacturing technology adoption: an adaptation of the technology acceptance model pp. 193-213

Thomas V. Scannell, Steven A. Melnyk and Roger J. Calantone

Effect of process parameters on material removal rate and surface roughness in electric discharge drilling of Inconel 718 using graphite electrode pp. 214-233

P. Kuppan, S. Narayanan and A. Rajadurai

QFD-TOPSIS-based model for managing Six Sigma DMAIC process in manufacturing pp. 234-248

Maher Lazreg

Volume 23, issue 1/2, 2011

Unbalanced production systems with floats: analysis and lean design pp. 4-15

Semyon M. Meerkov and Liang Zhang

A response surface methodology for parameter setting in a dynamic Conwip production control system pp. 16-33

Pedro L. Gonzalez-R, Jose M. Framinan and Rafael Ruiz-Usano

The use of dynamic work sharing production methods to reduce the impact of labour turnover in serial assembly lines pp. 34-53

J. Rene Villalobos, Marco A. Gutierrez, Luis R. Mar, Octavio Sanchez and Omar Ahumada

Unpaced production lines with jointly unbalanced operation time means and buffer capacities – their behaviour and performance pp. 54-68

Sabry Shaaban

Modelling of parallel production system with rework paths and its GA based simulator for optimal design pp. 69-81

Khalid R. Al-Momani and Jaber E. Abu Qudeiri

Metrics and experimental data for assessing unbalanced disassembly lines pp. 82-112

Seamus M. McGovern and Surendra M. Gupta

Simulated annealing vs. genetic algorithms applied using a new cost function for the car sequencing problem pp. 113-136

Juan J. Areal, Ricardo Marin Martin and Julio Garrido Campos

Volume 22, issue 4, 2011

Study of economics of multitasking with reference to a class of mechanical system components pp. 301-323

P. Selvaraj, P. Radhakrishnan and M. Adithan

Are carmakers on the wrong track? Too much outsourcing in an imperfect-modular industry can be harmful pp. 324-343

Vincent Frigant

The relationship of integration and automation under an uncertain environment: a SEM model pp. 344-361

Qiang Tu, Kun Liao and Yulong Li

Cutting force modelling considering cutter deflection for sculptured surface milling pp. 362-375

Qingyuan Cao, Jun Zhao and Yueen Li

Volume 22, issue 3, 2011

Continuous improvement processes in manufacturing enterprises as an enabler of process innovation pp. 207-218

Eva Kirner, Heidi Armbruster, Steffen Kinkel and Oliver Som

An information system to support problems definition based on technological frames and organisational routines pp. 219-232

Jose Javier Aguilar-Zambrano and Mickael Gardoni

The TRIZ-CBR synergy: a knowledge based innovation process pp. 233-246

Guillermo Cortes Robles, Angel Machorro Rodriguez, Stephane Negny and Jean Marc LeLann

CoCa: a tool for analysing collaborative practices to improve design process management pp. 247-258

Graham Jared, Christophe Merlo, Jeremy Legardeur and Guillaume Pol

A second look at the complex innovation phenomenon through a 'dialogical' principle pp. 259-267

S. Kerri Gati and A. Amezketa De La Fuente

A model for cultural change pp. 268-277

J.K. Roddy

Manufacturing competencies in high-tech NPD: on the impact of vertical integration and coordination pp. 278-300

Daniel Olausson and Thomas Magnusson

Volume 22, issue 2, 2011

Radial gap measurement and manufacturing error evaluation for small hole machined by micro-EDM pp. 94-106

Zhenyuan Jia, Xinyi Zheng, Fuji Wang and Wei Liu

Electrochemical spark micromachining (microchannels and microholes) of metals and non-metals pp. 107-123

A.V. Kulkarni, V.K. Jain and K.A. Misra

Influence of machining parameters on microdrill performance pp. 124-144

G. Hemanth, G.L. Samuel and N.J. Vasa

A comprehensive mathematical model to calculate polish time for oxide chemical mechanical process (CMP) pp. 145-159

S. Kumar, T.K. Garg and V.P. Wani

Numerical simulation of non-convex heat transfer of the weld pool surface during laser welding of titanium alloy pp. 160-180

S.Y. Pang, L.L. Chen, J.X. Zhou, D.M. Liao, Y.J. Yin, T. Chen and A.Q. Duan

Preparation and characterisation of silica-supported TiO 2 photocatalytic coatings by sol-gel pp. 181-192

M.G. Garnica-Romo, M.A. Hernandez Rivera, A.S. Lopez Rodriguez, P. Sifuentes Gallardo and L.L. Diaz-Flores

Study of electromagnetically actuated meso flow control valve pp. 193-204

Y.H. Guu and Hung-Wen Yeh

Volume 22, issue 1, 2011

Managing an assembly production process with a proper control policy pp. 2-25

Yaghoub Khojasteh-Ghamari and Ryo Sato

Memetic algorithm for non-identical parallel machines scheduling problem with earliness and tardiness penalties pp. 26-38

Wisut Supithak and Karn Plongon

Exact and heuristic approaches for lot splitting and scheduling on identical parallel machines pp. 39-57

Carina Pimentel, Filipe Pereira Alvelos, Antonio Duarte and Jose M. Valerio de Carvalho

A decomposition approach to the preventive maintenance scheduling problem: an empirical example for the Spanish power plant system pp. 58-77

Salvador Perez Canto

A stochastic approach to diffusion model with asymmetric influence pp. 78-92

Naomichi Suzuki, Masatoshi Tanaka, Kazuhiro Kasai and Kijung Sung