International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 5/6, 2005

Computational model for the steady-state elasto-hydrodynamic interaction in wafer slicing process using wiresaw pp. 407-429

Liqun Zhu and Imin Kao

In-process force monitoring for precision grinding semiconductor silicon wafers pp. 430-440

Jeremiah A. Couey, Eric R. Marsh, Byron R. Knapp and R. Ryan Vallance

A novel fixed abrasive process: chemo-mechanical grinding technology pp. 441-454

Libo Zhou, Jun Shimizu and Hiroshi Eda

Molecular dynamics simulation of the effect of tool edge radius on cutting forces and cutting region in nanoscale ductile cutting of silicon pp. 455-466

M.B. Cai, X.P. Li and M. Rahman

Yield improvement via minimisation of step height non-uniformity in chemical mechanical planarisation (CMP) with pressure and velocity as control variables pp. 467-489

Muthukkumar S. Kadavasal, Abhijit Chandra, Sutee Eamkajornsiri and Ashraf -F. Bastawros

Effects of tool stiffness and infeed scheme on planarisation. (Integrated model for simulation of planarisation process) pp. 490-503

Libo Zhou, Jun Shimizu and Hiroshi Eda

Modelling and analysis of pad surface topography and slurry particle size distribution effects on material removal rate in chemical mechanical planarisation pp. 504-529

Changxue Wang, Peter Sherman and Abhijit Chandra

In-situ infrared detection and heating of metallic phase of silicon during scratching test pp. 530-539

Lei Dong, John A. Patten and Jimmie A. Miller

Quantitative assessment of subsurface damage depth in silicon wafers based on optical transmission properties pp. 540-552

J.M. Zhang and J.G. Sun

Fabrication of pin diodes using direct-bonded silicon wafers pp. 553-565

Iqbal K. Bansal and Mark Surgent

Selecting and developing suppliers for mass merchandisers pp. 566-580

Kee S. Kim, Stephen Jones and Tami L. Knotts

Allocation of parts to cells, minimising tardiness and idle time by simulated annealing pp. 581-593

R. Tavakkoli-Moghaddam, M. Rabbani, A. Ghodratnama and P.K. Ahmed

Volume 7, issue 2/3/4, 2005

Ultrasonic machining effects on the surface finish and strength of silicon carbide ceramics pp. 107-126

M. Ramulu

Non-traditional machining using pulsed water jets pp. 127-141

M.J. Jackson

Experimental determination of viscosity of abrasive flow machining media pp. 142-156

A. Agrawal, V.K. Jain and K. Muralidhar

Evolution of EDM process modelling and development towards modelling of the micro-EDM process pp. 157-180

Sandeep Dhanik, S.S. Joshi, N. Ramakrishnan and P.R. Apte

Experimental investigations on Nd:YAG laser cutting of silicon nitride pp. 181-191

A.S. Kuar, B. Doloi and B. Bhattacharyya

Rotary ultrasonic machining of ceramics: design of experiments pp. 192-206

Yue Jiao, Ping Hu, Z.J. Pei and Clyde Treadwell

Wire electrical discharge machining of gamma titanium aluminide for optimum process criteria yield in single pass cutting operation pp. 207-223

S. Sarkar, S. Mitra and B. Bhattacharyya

Roughness characterisation of gas phase micromachining process suitable for fabricating silicon based microsystems pp. 224-245

M. Packirisamy, I. Stiharu and L. Flores

Temperature distribution in the workpiece due to electro-discharge diamond surface grinding using FEM pp. 246-267

Vinod Yadava, V.K. Jain and Prakash M. Dixit

Generation of erosion profile of through hole in electrochemical boring using a stepwise moving electrode pp. 268-286

H. Hocheng, P.S. Kao and S.C. Lin

Thermal stresses during electro-chemical spark machining pp. 287-307

R.S. Mulik and Vinod Yadava

Numerical control system for the ultrasonic vibration assisted electrical discharge machine tool pp. 308-317

J.H. Zhang, Y. Qin, Q.H. Zhang, Y.J. Hu and S.F. Ren

Development of an innovative coolant system for rotary ultrasonic machining pp. 318-328

Z.C. Li, Y. Jiao, T.W. Deines, Z.J. Pei and C. Treadwell

Application of Taguchi method for optimisation of powder mixed electrical discharge machining pp. 329-341

H.K. Kansal, Sehijpal Singh and P. Kumar

On the fatigue characteristics of electro-discharge machined alumina particulate reinforced aluminium matrix composites pp. 342-351

P.K. Brahmankar and N. Ramakrishnan

Research on pulse electrochemical finishing using a moving cathode pp. 352-365

Jinjin Zhou, Guibing Pang, Hui Wang and Wenji Xu

A simplified model for predicting the penetration of an abrasive water jet in a piercing operation pp. 366-380

P. Hemanth, P.V. Naqash and N. Ramesh Babu

A theoretical model of surface roughness in ultrasonic vibration assisted electrical discharge machining in gas pp. 381-390

Q.H. Zhang, J.H. Zhang, S.F. Ren, Z.W. Niu and X. Ai

A study of process parameters for coal cutting under Indian environmental conditions using a hydro jet cutting system pp. 391-403

Vinay Sharma and Surender Kumar

Volume 7, issue 1, 2005

A configuration study on the relationships between production systems and business strategy in the changing environment pp. 20-40

Jian Wang and De-bi Tsao

Product mix decisions and production lot sizes pp. 41-51

Olli-Pekka Hilmola

The process, practice and outcomes of non-financial auditing: five Australian case studies pp. 52-82

Damien Power and Mile Terziovski

Decision making for shop floor control integration strategies in wafer fabrication using tabu search-based methodology pp. 83-103

D.Y. Sha and Chao-Yang Liu

Volume 6, issue 6, 2004

A comparative study of virtual prototyping and physical prototyping pp. 503-522

Ian Gibson, Zhan Gao and Ian Campbell

Hybrid prototyping pp. 523-533

Ramin Moshfegh and Peter Ottosson

Direct layered manufacturing of point sampled objects pp. 534-549

G. Saravana Kumar, Prem Kumar Kalra and Sanjay G. Dhande

A new approach of the visibility calculation of an object pp. 550-556

William Derigent, Sebastien Remy and Gabriel Ris

Rapid manufacturing of medical prostheses pp. 567-583

Jose C. Ferreira, Nuno M.F. Alves and Paulo J.S. Bartolo

Rapid Cloning (RC): a new reproduction method for complex castings pp. 584-593

Heinz Steinbeiss and Timo Hanss

Volume 6, issue 5, 2004

Linking manufacturing and supply chain strategies: a conceptual framework pp. 401-425

Archie Lockamy Iii

Advanced manufacturing technologies: evidences from Indian automobile companies pp. 426-433

G.S. Dangayach and S.G. Deshmukh

Importance of assembly simulation as an aid for process planning for an aircraft assembly operation: perspective from experience pp. 434-456

J. Arnold, M. Ramulu and P.N. Rao

A comparative analysis of strategy determinants in manufacturing: some findings in Shanghai and Hong Kong pp. 457-484

Kit Fai Pun, Kwai Sang Chin and H.C.W. Lau

A modelling and manufacturing strategy for the heterogeneous solids pp. 485-500

Puneet Tandon and Anuj Kant

Volume 6, issue 3/4, 2004

Concurrent engineering: basis and implementation pp. 199-213

B. Bowonder and K.J. Sharma

Involving suppliers in concurrent engineering: learning from Japan in US auto pp. 214-240

Young K. Ro, Jeffrey K. Liker and Laurent D. Langlet

Concurrent engineering at Airbus – a case study pp. 241-253

Roland Haas and Manoj Sinha

The making of Boeing 777: a case study in concurrent engineering pp. 254-264

K.J. Sharma and B. Bowonder

Concurrent engineering for the development of advanced composites technology for light combat aircraft pp. 265-279

Kota Harinarayana

Concurrent engineering in a pharmaceutical firm: a case study of Dr Reddy's Laboratories Ltd pp. 280-290

G.V. Prasad and B. Madhusudan Rao

Concurrent engineering in an Indian automobile firm: the experience of Tata Motors pp. 291-314

B. Bowonder

Concurrent engineering for missile development pp. 315-333

Prahlada and Atul Sen

Concurrent engineering in practice: a brief review pp. 334-344

K. J. Sharma

Concurrent engineering at Titan Industries Ltd: a case study from the watch industry pp. 345-360

B.V. Nagaraj

Accelerating product development in the automobile industry pp. 361-371

Venkataramani Sumantran

Multiple perspectives of concurrent engineering and their integration pp. 372-390

B. Bowonder, S. Bhuyan and K.J. Sharma

Concurrent engineering in the development of an intermediate jet trainer – a case study pp. 391-397

Y. Kumar, P. Jayasimha and A. Mohan

Volume 6, issue 1/2, 2004

APC matrix: a framework for platform strategy pp. 9-24

Chyan Yang and Hong-Shiang Jiang

Organisational knowledge creation capability in Taiwan's manufacturing industry pp. 25-42

Ben-Jeng Wang and Dan-Shang Wang

A framework of performance management based on an analysis and evaluation model for manufacturing systems pp. 43-54

Yi Lu, Jinsong Xue and Zhan Gao

Linking competitive priorities and manufacturing networks: a manufacturing strategy perspective pp. 55-80

Martin Rudberg

Managing the development of manufacturing systems software using a unified framework pp. 81-97

H. Y. K. Lau and K. L. Mak

Successful factors of the fabless IC industry in Taiwan pp. 98-111

Louis Y. Y. Lu, Shiu-Wan Hung and Chyan Yang

Internal plant environment and just-in-time manufacturing pp. 112-124

Ron McLachlin

Transfer batch sizes and the financial performance of manufacturing – theory of constraints perspective pp. 125-136

Olli-Pekka Hilmola

The multi-source fabless-foundry partnership selection model pp. 137-154

Jia-Jane Shuai, Gwo-Hshiung Tzeng and Han-Lin Li

Developing new organisational practice: the virtual factory pp. 155-170

Philippa Collins, Adrian Pluess and Charles Huber

Focus groups: impact of quality and process capability factors on the silicon wafer slicing process pp. 171-184

Chin-Tsai Lin, Che-Wei Chang and Chie-Bein Chen

Multiple regression analysis (MRA) in modelling milling of glass fibre reinforced plastics (GFRP) pp. 185-197

J. Paulo Davim and Pedro Reis