International Journal of Manufacturing Technology and Management

2000 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 21, issue 3/4, 2010

Linear barcodes, direct part marking and RFID for material handling applications pp. 208-224

Athanasios Klonis and Farhad Nabhani

Potentials and limitations of RFID applications in packaging industry: a case study pp. 225-238

Thomas Seidel and Reik Donner

Business case scenarios for the impact of RFID on the end-to-end supply chain pp. 239-253

Yacine Rekik

RFID public logistics information sharing and exchanging solution pp. 254-268

Huifang Deng and Xingtao Liang

RFID enabled fully automated warehouse management: adding the business context pp. 269-288

Panos Dimitropoulos and John Soldatos

Critical management issues for implementing RFID in supply chain management pp. 289-307

Bharatendu Srivastava

RFID-empowered monitoring and controlling for advanced manufacturing pp. 308-315

L. Wang

RFID: a brief overview pp. 316-323

Vijay Shah

The strategic consortia movement in standardisation pp. 324-339

Masami Kajiura

Volume 21, issue 1/2, 2010

A novel nanofinishing process using magnetorheological abrasive polishing fluid pp. 4-16

Sunil Jha and Vijay Kumar Jain

Multi-response optimisation of Nd:YAG laser micro-machining of die steel using Response Surface Methodology pp. 17-29

A.S. Kuar, S.K. Dhara and S. Mitra

Modelling and analysis on machining characteristics during pulsed Nd:YAG laser microgrooving of aluminium titanate (Al 2 TiO 5 ) pp. 30-41

B. Doloi, D. Dhupal and B. Bhattacharyya

Micromachining of silicon with excimer laser in air and water medium pp. 42-53

Alok Kumar Das and Partha Saha

Investigation into the influence of Electrochemical Micromachining (EMM) parameters on Radial Overcut through RSM-based approach pp. 54-66

J. Munda, M. Malapati and B. Bhattacharyya

Experimental results and analysis for Electrical Discharge Machining (EDM) of aluminium metal matrix composites with powder-mixed dielectric: Lenth's method pp. 67-82

Shankar Singh, Sachin Maheshwari, Aloke Dey and P.C. Pandey

Surface modification of C40 steel using WC-Cu P/M green compact electrodes in EDM pp. 83-98

Promod K. Patowari, Upendra K. Mishra, Partha Saha and Prasanta K. Mishra

Cutting tool condition monitoring system for high-speed turning operations pp. 99-111

H. Chelladurai, V.K. Jain and N.S. Vyas

Fourier Transform based texture measures for grinding wheel condition monitoring using machine vision pp. 112-121

N. Arunachalam and B. Ramamoorthy

Experimental investigations to optimise step drill geometry for burr minimisation in drilling using regression model pp. 122-134

Ch. Ramu, N.K. Mehta, Pradeep Kumar and A.G. Shankara Murthy

Tool life enhancement through nano-composite coating on the residual stress controlled cutting faces pp. 135-147

K. Ramesh, Roger Heng, Jonathan Ho and Adrian Kang

Investigations of the effect of injection parameters on the dimensional accuracy of wax patterns used in ceramic shell investment casting pp. 148-159

Balwinder Singh, Pradeep Kumar and B.K. Mishra

Modelling and control of a bio-inspired microgripper pp. 160-175

G.B. Madhab, C.S. Kumar and P.K. Mishra

Performance evaluation of mixed model assembly lines pp. 176-193

Jonnalagedda V.L. Venkatesh and Balaji M. Dabade

Effect of imperfect interfaces on Elastothermodynamic Damping of fibre-reinforced MMCs pp. 194-205

S.K. Srivastava, B.K. Mishra and S.C. Jain

Volume 20, issue 1/2/3/4, 2010

The sliding frame – extending the concept to various assembly line balancing problems pp. 4-24

Yuval Cohen and Ezey Dar-El

An empirical comparison of improvement heuristics for the mixed-model U-line balancing problem pp. 25-45

John K. Visich, Basheer M. Khumawala and Joaquin Diaz-Saiz

The performance of unpaced production lines with unequal operating time variabilities and buffer sizes pp. 46-58

Sabry Shaaban

Modelling the allocation of protective capacity to design unbalanced production lines pp. 59-74

M. Caridi and R. Cigolini

Adaptive Kanban control systems for two-stage production lines pp. 75-93

Katsuhiko Takahashi, Katsumi Morikawa, Daisuke Hirotani and Takeshi Yoshikawa

An investigation of the influence of coefficient of variation in the demand distribution on the performance of several lean production control strategies pp. 94-119

John Geraghty and Cathal Heavey

System model of production inventory control pp. 120-155

Dirk Pons

Factorial effects on the performance of closed-loop asynchronous automatic assembly systems pp. 156-168

Wai Keung Leung and W.C. Ng

An overview and comparison of four sequence generating methods for robotic assembly pp. 169-196

B.B. Biswal, B.B. Choudhury, D. Mishra and P. Dash

Cell formation considering real-life production parameters pp. 197-221

Amit Rai Dixit and P.K. Mishra

Operator assignment/reassignment problems in incremental cell formation pp. 222-241

G. Kumara Raja Singh and G. Srinivasan

Performance evaluation of hybrid-CLP vs. GA: non-permutation flowshop with constrained resequencing buffers pp. 242-258

Gerrit Farber, Anna M. Coves Moreno and Said Salhi

Supervisory-based capacity allocation control for manufacturing systems pp. 259-285

Karim Tamani, Reda Boukezzoula and Georges Habchi

Multistage production systems with random yields and rigid demand pp. 286-299

Tal Ben-Zvi and Abraham Grosfeld-Nir

Yield management in TFT-LCD manufacturing by using regression and neural network techniques pp. 300-315

Kun-Lin Hsieh

Solving the response time variability problem by means of the cross-entropy method pp. 316-330

Alberto Garcia-Villoria, Albert Corominas and Rafael Pastor

Note on the behaviour of an improvement heuristic on permutation and blocking flow-shop scheduling pp. 331-357

Ramon Companys, Imma Ribas and Manel Mateo

Optimum design selection of jigs/fixtures using digraph and matrix methods pp. 358-371

V. Paramasivam, K.P. Padmanaban and V. Senthil

Volume 19, issue 3/4, 2010

Development of Product Lifecycle Management metrics: measuring the impact of PLM pp. 167-179

Cynthia L. Tomovic, Lisa B. Ncube, Abram Walton and Michael Grieves

Product Lifecycle Quality (PLQ): a framework within Product Lifecycle Management (PLM) for achieving product quality pp. 180-190

Michael W. Grieves

Mechatronics Design Methodology applied at manufacturing companies pp. 191-210

David A. Guerra-Zubiaga, Edgar Rios, Robert Parkin, Mike Jackson, Mileta M. Tomovic and Ricardo Ramirez-Mendoza

Multidisciplinary integrated design optimisation platform and application on active suspension pp. 211-223

Hao Wang, Shaoping Wang and Mileta M. Tomovic

Integrated PLM-process-approach for the development and management of telecommunications products in a multi-lifecycle environment pp. 224-237

Julius D. Golovatchev, Oliver Budde and Chin-Gi Hong

Intelligent process modelling using Feed-Forward Neural Networks pp. 238-257

Mohamed H. Gadallah, Khaled Abdel Hamid El-Sayed and Keith Hekman

A survey on the integration of product and package development pp. 258-278

Caroline Bramklev

The impact of Product Lifecycle Management on virtual team creation: a concept change model for heightened productivity pp. 279-293

Magdalena B. Lech, Tanner J. Georgiades, John E. Sukup Iii and Cynthia L. Tomovic

Product Lifecycle Management in support of green manufacturing: addressing the challenges of global climate change pp. 294-305

L. Varinia Barreto, Hannah C. Anderson, Alyssa Anglin and Cynthia L. Tomovic

Entry-level engineering professionals and Product Lifecycle Management: a competency model pp. 306-311

Sharron A. Frillman, Kari L. Wilde, Jonathan F. Kochert, Scott R. Homan and Cynthia L. Tomovic

PLM-based certification process in aeronautics extended enterprise pp. 312-329

Benoit Eynard, Nadege Troussier and Bruno Carratt

Application of PLM in higher education procurement pp. 330-336

Michael Wisma and Cynthia L. Tomovic

Volume 19, issue 1/2, 2010

Supply chain coordination using EDI with performance implications pp. 6-26

Craig A. Hill and Gary D. Scudder

Evaluating the role and integration of contract manufacturing strategy in supply chain management: an empirical study pp. 27-46

Liang-Chieh (Victor) Cheng

Supplier selected relationships: choosing friends, over family pp. 47-67

Michael D.J. Clements, David L. Dean and David A. Cohen

Scheduling to minimise penalties for a non-dedicated supplier in integrated supply chains pp. 68-81

Anurag Agarwal and Vaidyanathan Jayaraman

The role of integrative capabilities in involving suppliers in New Product Development: a knowledge integration perspective pp. 82-101

Sarah Jinhui Wu and Gary L. Ragatz

A conceptual model for integrating strategic supply management into the supply chain pp. 102-123

Eva Ponce-Cueto, Alvaro Garcia-Sanchez and Miguel Ortega-Mier

Real-time order management with supplier capacity reservation pp. 124-139

Elias T. Kirche and Rajesh Srivastava

Analysis of two different automated purchase order systems in telecom electronics manufacturing unit pp. 140-164

Lauri Rantala and Olli-Pekka Hilmola