International Journal of Process Management and Benchmarking

2005 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 8, issue 4, 2018

A framework to enhance cellular manufacturing system: a total interpretive structural modelling approach pp. 393-407

Sanjay Kumar, Vasdev Malhotra and Vikas Kumar

An investigative study to evaluate the impact of lean manufacturing in Indian manufacturing industry pp. 408-442

Inderpreet Singh Ahuja, Jaspreet Singh and Gurinder Singh

Multi-objective municipal solid waste management recycling problem in fuzzy-rough environment pp. 443-469

Sutapa Pramanik, Kalipada Maity, Dipak Kumar Jana and Anupam Mukherjee

Identification of performance variables which affect the FMS: a state-of-the-art review pp. 470-489

Vineet Jain and Tilak Raj

Solving a multi-manned assembly line balancing problem in a Pareto sense pp. 490-515

Parames Chutima and Krit Prasert

Experimental investigation on surface integrity in machining of Inconel X750 with WEDM using Taguchi technique pp. 516-530

Mandeep Kumar and Hari Singh

Volume 8, issue 3, 2018

An automated method for the construction of semantic business process patterns pp. 263-290

Lobna Makni, Nahla Zaaboub Haddar and Hanêne Ben-Abdallah

A farmland choice based on hesitant fuzzy linguistic preferences relations pp. 291-317

Nesrin Halouani and Sonia Hajlaoui

A reliability centred maintenance approach for assessing the impact of maintenance for availability improvement of carding machine pp. 318-339

Aniket Thawkar, Pravin Tambe and Vishwas Deshpande

A graph-theoretic-based meta-heuristic algorithm for solving cooperative dynamic facility layout problems pp. 340-366

Amir Saman Kheirkhah and Masume Messi Bidgoli

Evaluating just-in-time implementation implications in an Indian manufacturing industry pp. 367-392

Inderpreet Singh Ahuja, Sukhjinder Singh and Gurinder Singh

Volume 8, issue 2, 2018

Response surface method-based optimisation of spray parameters during impingement cooling of hot steel in rolling pp. 125-141

Santosh Kumar Nayak and Purna Chandra Mishra

Efficiency measurement of emergency departments in Isfahan, Iran pp. 142-155

Saeedeh Ketabi, Ehsan Teymouri and Mohammad Ketabi

Prediction of remaining useful life of cutting tools: a comparative study using soft computing methods pp. 156-181

J. Gokulachandran and R. Padmanaban

Optimisation of AGVs path layout in flexible manufacturing system using 0-1 linear integer programming pp. 182-205

Suman Gothwal and Tilak Raj

The application of overall equipment effectiveness to support the development of a steamless nut-separated palm oil mill pp. 206-227

Tanakorn Tantanawat, Nuttharporn Puckdeesorasuk, Arkom Haewchin and Ekkarut Viyanit

Integrating agile thinking into maintenance strategy performance analysis pp. 228-245

Priyank Srivastava, Dinesh Khanduja and Vishnu P. Agrawal

Measurement of overall equipment effectiveness to improve operational efficiency pp. 246-261

Rohit Kumar Singh, Elvin Joseph Clements and Vandana Sonwaney

Volume 8, issue 1, 2018

Lean implementation in traditional distributor warehouse - a case study in an FMCG company in Indonesia pp. 1-15

Elia Oey and Maulana Nofrimurti

Impact of policy implementation on telecommunication diffusion in India pp. 16-34

Shailaja Rego, Naresh Kumar and P.N. Mukherjee

Application of interactive fuzzy goal programming for multi-objective integrated production and distribution planning pp. 35-58

Md. Sanowar Hossain and Md. Mosharraf Hossain

Prioritising the performance measures of FMS using multi-criteria decision making approaches pp. 59-78

Suman Gothwal and Tilak Raj

Development of a validation and qualification process for the manufacturing of medical devices: a case study based on cross-sector benchmarking pp. 79-102

Yuchun Xu, Ashutosh Tiwari, Hao Chen Chen and Christopher J. Turner

Modelling and analysis of enablers for successful implementation of cellular manufacturing system pp. 103-123

Ankur Sharma and Rajiv Kumar Sharma

Volume 7, issue 4, 2017

A novel hybrid model for selection of benchmarking technique in Indian service industries pp. 409-436

Bhupender Singh, Sandeep Grover and Vikram Singh

Workplace spirituality, frontline employee adaptability and job outcomes: an empirical study pp. 437-465

Michael Sony and Nandakumar Mekoth

Identification of key barriers affecting the cellular manufacturing system by ISM approach pp. 466-486

Sanjay Kumar, Vasdev Malhotra and Vikas Kumar

Ruling out key enablers for software process reengineering in Indian small and medium enterprises pp. 487-517

Ashima Singh and Himanshu Aggarwal

An estimation technique in agile archetype using story points and function point analysis pp. 518-539

Saru Dhir, Deepak Kumar and V.B. Singh

Volume 7, issue 3, 2017

A green supply chain production inventory model with uncertain holding cost pp. 277-304

Debnarayan Khatua, Gourisankar Roymahapatra and Kalipada Maity

Benchmarking Indian SMEs: a DEA approach pp. 305-331

Rohita Kumar Mishra and Sanjay Pal

Quantitative analysis of drivers affecting green supply chain management in Rajasthan SMEs pp. 332-353

Preetam Singh and Vivek Kumar

Demographic factors contributing to online movie piracy of Hindi films produced in Mumbai pp. 354-370

Pradeep Kumar Gupta and Bhama Venkataramani

Solving the straddle carrier routing problem using Six Sigma methodology pp. 371-396

Khaled Mili

A hybrid FMEA-TOPSIS method for risk management, case study: Esfahan Mobarakeh Steel Company pp. 397-408

Mehdi Ahmadi, Seyyed Mohammad Hadji Molana and Sayed Mojtaba Sajadi

Volume 7, issue 2, 2017

Mathematical analysis of machining system with warm spares and variable service rate PAPER WITHDRAWN pp. 141-157

Purushottam Jharotia and D.C. Sharma

Designing robust model of Six Sigma implementation based on critical successful factors and MACBETH pp. 158-171

Amir Karbassi Yazdi and Ghanbar Abbaspour Esfeden

Solid transportation problem with budget constraints under interval uncertain environments pp. 172-182

Ajay Kumar Bhurjee, Pankaj Kumar and Saroj Kumar Padhan

Systematic literature review of classification and categorisation of benchmarking in supply chain management pp. 183-205

Kailash, Rajeev Kumar Saha and Sanjeev Goyal

Green consumerism: overview and further research directions pp. 206-223

Aasha Sharma and Seema Joshi

The sustainability issues of diversified firms in emerging economies context: a theoretical model and propositions pp. 224-248

Pratima Verma, R.R.K. Sharma and Vimal Kumar

Operational efficiency in manufacturing process using design of experiments pp. 249-261

Sharad Chaturvedi and Deepankar Chakrabarti

Organisational culture preference for gen Y's prospective job aspirants: a personality-culture fit perspective pp. 262-275

Nisha Jain and Christine D'lima

Volume 7, issue 1, 2017

Evaluating exploits of Indian entrepreneurs through maintenance practices for realising the overall organisational goals and objectives pp. 1-19

Kanwarpreet Singh and Inderpreet Singh Ahuja

Assessment of human resource competence and performance indicator pp. 20-37

Chahinaze Fikri Benbrahim, Naoufal Sefiani, Anouar Meddaoui and Kamal Reklaoui

A new robust model for location-inventory in three echelon supply chain with uncertain demand in small and medium business enterprises pp. 38-58

Nafiseh Aghabozorgi, Mahdi Alinaghian and Seyed Mojtaba Sajadi

Youth and sustainable development - overview, theoretical framework and further research directions pp. 59-78

Archana Singh and Nehajoan Panackal

Is trade openness leading to sustainable carbon emission? pp. 79-93

Shreya Sethi and Rajani Gupte

Developing the weighted ISM-MICMAC framework for process design stage of production system life cycle pp. 94-119

Rajesh Attri and Sandeep Grover

Optimal ordering policy under two stage trade credits financing for deteriorating items using discounted cash flow approach pp. 120-140

R.P. Tripathi