Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 77, issue C, 2013

Waste electric and electronic toys: Management practices and characterisation pp. 1-12

V. Pérez-Belis, M.D. Bovea and A. Gómez

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands pp. 13-21

Mariëlle Corsten, Ernst Worrell, Magda Rouw and Armande van Duin

Material flow and industrial demand for palladium in Korea pp. 22-28

Jeong Gon Kim

Optimisation of a centralised recycling system for steel plant by-products, a logistics perspective pp. 29-36

Katarina Lundkvist, Mikael Larsson and Caisa Samuelsson

Reliability analysis of rainwater tanks using daily water balance model: Variations within a large city pp. 37-43

Monzur Alam Imteaz, Amimul Ahsan and Abdallah Shanableh

Greywater production in airports: Qualitative and quantitative assessment pp. 44-51

Eduardo de Aguiar do Couto, Maria Lúcia Calijuri, Paula Peixoto Assemany, Aníbal da Fonseca Santiago and Isabella de Castro Carvalho

Survey of household waste composition and quantities in Abuja, Nigeria pp. 52-60

Toochukwu Chibueze Ogwueleka

Comparative LCA to evaluate how much recycling is environmentally favourable for food packaging pp. 61-68

Sara Toniolo, Anna Mazzi, Monia Niero, Filippo Zuliani and Antonio Scipioni

Long-term settlement prediction for wastewater biosolids in road embankments pp. 69-77

M.M. Disfani, A. Arulrajah, V. Suthagaran and M.W. Bo

Biorefinery study of availability of agriculture residues and wastes for integrated biorefineries in Brazil pp. 78-88

T. Forster-Carneiro, M.D. Berni, I.L. Dorileo and M.A. Rostagno

Greening of production in metal processing industry through process modifications and improved management practices pp. 89-96

Emrah Alkaya and Göksel N. Demirer

Moving up the waste hierarchy: Car boot sales, reuse exchange and the challenges of consumer culture to waste prevention pp. 97-107

Nicky Gregson, Mike Crang, Jennifer Laws, Tamlynn Fleetwood and Helen Holmes

Energy balances, greenhouse gas emissions and economics of biochar production from palm oil empty fruit bunches pp. 108-115

Soni Sisbudi Harsono, Philipp Grundman, Lek Hang Lau, Anja Hansen, Mohammad Amran Mohd Salleh, Andreas Meyer-Aurich, Azni Idris and Tinia Idaty Mohd Ghazi

Volume 76, issue C, 2013

Review of sustainability management initiatives within Finnish forest products industry companies—Translating Eu level steering into proactive initiatives pp. 1-11

R. Husgafvel, G. Watkins, L. Linkosalmi and O. Dahl

Tracking changes in the global impacts of metal concentrate acquisition for the metals industry in Finland pp. 12-20

Mari Tuusjärvi

Global anthropogenic tellurium cycles for 1940–2010 pp. 21-26

Goksin Kavlak and T.E. Graedel

Influence of interventions and internal motivation on Swedish homeowners’ change of on-site sewage systems pp. 27-40

Are Wallin, Mathias Zannakis, Lars-Olof Johansson and Sverker Molander

Ink and dirt behavior in pulping after artificial aging of cold-set offset printed newspapers in different humidity conditions pp. 41-49

Kalle Kemppainen, Antti Haapala, Mika Körkkö and Jouko Niinimäki

Role of behavioural factors in green supply chain management implementation in Indian mining industries pp. 50-60

Kamalakanta Muduli, Kannan Govindan, Akhilesh Barve, Devika Kannan and Yong Geng

Volume 75, issue C, 2013

Performance analysis of on-farm irrigation tanks on agricultural drainage water reuse and treatment pp. 1-13

Dongguo Shao, Xuezhi Tan, Huanhuan Liu, Haidong Yang, Chun Xiao and Fengshun Yang

Sugarcane bagasse—The future composite material: A literature review pp. 14-22

Y.R. Loh, D. Sujan, M.E. Rahman and C.A. Das

Dynamic material flow analysis of zinc resources in China pp. 23-31

Lingyu Yan, Anjian Wang, Qishen Chen and Jianwu Li

Examining recycling container attributes and household recycling practices pp. 32-40

Gordon W.S. Lane and Travis P. Wagner

Towards an integrated, resource-efficient rice mill complex pp. 41-51

Jeng Shiun Lim, Zainuddin Abdul Manan, Haslenda Hashim and Sharifah Rafidah Wan Alwi

Best practice measures assessment for construction and demolition waste management in building constructions pp. 52-62

Paola Villoria Saez, Mercedes del Río Merino, Alicia San-Antonio González and César Porras-Amores

Elemental analysis of lightweight metal scraps recovered by an automatic sorting technique combining a weight meter and a laser 3D shape-detection system pp. 63-69

Shigeki Koyanaka, Kenichiro Kobayashi, Yoshitake Yamamoto, Masato Kimura and Kenso Rokucho

Volume 74, issue C, 2013

The omnivorous diet of modern technology pp. 1-7

Aaron Greenfield and T.E. Graedel

Transitions of municipal solid waste management. Part I: Scenarios of Swiss waste glass-packaging disposal pp. 8-19

Grégoire Meylan, Roman Seidl and Andy Spoerri

A model for estimating construction waste generation index for building project in China pp. 20-26

Jingru Li, Zhikun Ding, Xuming Mi and Jiayuan Wang

Sustainable airport environments: A review of water conservation practices in airports pp. 27-36

Isabella de Castro Carvalho, Maria Lúcia Calijuri, Paula Peixoto Assemany, Marcos Dornelas Freitas Machado e Silva, Ronan Fernandes Moreira Neto, Aníbal da Fonseca Santiago and Mauro Henrique Batalha de Souza

Energy recovery or material recovery for MSW treatments? pp. 37-44

Chung-Chiang Chen and Yi-Tui Chen

Water use patterns and conservation in households of Wei River Basin, China pp. 45-53

Liangxin Fan, Guobin Liu, Fei Wang, Violette Geissen, Coen J. Ritsema and Yan Tong

A cost and benefit analysis of future end-of-life vehicle glazing recycling in France: A systematic approach pp. 54-65

Romain Farel, Bernard Yannou, Asma Ghaffari and Yann Leroy

The impact of climate change on the benefit of a rain barrel sharing network pp. 66-74

Yongwon Seo, Jungkyu Ahn and Young-Oh Kim

Limitations of model-fitting methods for kinetic analysis: Polystyrene thermal degradation pp. 75-81

Pedro E. Sánchez-Jiménez, Luis A. Pérez-Maqueda, Antonio Perejón and José M. Criado

A substance flow analysis of phosphorus in the UK food production and consumption system pp. 82-100

James Cooper and Cynthia Carliell-Marquet

Life cycle assessment of hot mix asphalt and zeolite-based warm mix asphalt with reclaimed asphalt pavement pp. 101-114

Rosario Vidal, Enrique Moliner, Germán Martínez and M. Carmen Rubio

A comparison of two models for dealing with urban solid waste: Management by contract and management by public–private partnership pp. 115-123

Adauto Fernandes Marconsin and Derval dos Santos Rosa

Monitoring and environmental modeling of earthwork impacts: A road construction case study pp. 124-133

Adrien Capony, Bogdan Muresan, Michel Dauvergne, Jean-Claude Auriol, Valéry Ferber and Agnès Jullien

Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials—An overview pp. 134-143

Tongsheng Zhang, Peng Gao, Pinhai Gao, Jiangxiong Wei and Qijun Yu

Environmental training in organisations: From a literature review to a framework for future research pp. 144-155

Charbel José Chiappetta Jabbour

An optimization model for product returns using genetic algorithms and artificial immune system pp. 156-169

Ali Diabat, Devika Kannan, Mathiyazhagan Kaliyan and Davor Svetinovic

A fuzzy multi criteria approach for evaluating green supplier's performance in green supply chain with linguistic preferences pp. 170-179

Lixin Shen, Laya Olfat, Kannan Govindan, Roohollah Khodaverdi and Ali Diabat

Volume 73, issue C, 2013

Multivariate data analysis applied in Hot-Mix asphalt plants pp. 1-10

Régis Sebben Paranhos and Carlos Otávio Petter

The effects of recovering fibre and fine materials on sludge dewatering properties at a deinked pulp mill pp. 11-16

L. Mäkinen, A. Ämmälä, M. Körkkö and J. Niinimäki

Global anthropogenic selenium cycles for 1940–2010 pp. 17-22

Goksin Kavlak and T.E. Graedel

Prioritizing the best sites for treated wastewater instream use in an urban watershed using fuzzy TOPSIS pp. 23-32

Yeonjoo Kim, Eun-Sung Chung, Sang-Mook Jun and Sang Ug Kim

Industrial metabolism of PVC in China: A dynamic material flow analysis pp. 33-40

Yucheng Zhou, Ning Yang and Shanying Hu

Is PET bottle-to-bottle recycling safe? Evaluation of post-consumer recycling processes according to the EFSA guidelines pp. 41-45

Frank Welle

Greenhouse gas emissions and energy balance of sunflower biodiesel: Identification of its key factors in the supply chain pp. 46-52

Alfredo Iriarte and Pablo Villalobos

Bauxite residue in cement and cementitious applications: Current status and a possible way forward pp. 53-63

Y. Pontikes and G.N. Angelopoulos

Biopolymer from industrial residues: Life cycle assessment of poly(hydroxyalkanoates) from whey pp. 64-71

Martin Koller, Daniel Sandholzer, Anna Salerno, Gerhart Braunegg and Michael Narodoslawsky

On-site rainwater harvesting to achieve household water security among rural and peri-urban communities in Jordan pp. 72-77

Almoayied Assayed, Zaid Hatokay, Rania Al-Zoubi, Shadi Azzam, Mohammad Qbailat, Ahmad Al-Ulayyan, Saleem, Ma’ab Abu, Shadi Bushnaq and Robert Maroni

Field investigation of high-volume fly ash pavement concrete pp. 78-85

Roz-Ud-Din Nassar, Parviz Soroushian and Tewodros Ghebrab

Assessment of residential rainwater harvesting efficiency for meeting non-potable water demands in three climate conditions pp. 86-93

Mohammad Hossein Rashidi Mehrabadi, Bahram Saghafian and Fereshte Haghighi Fashi

Door-stepping as a strategy for improved food waste recycling behaviour – Evaluation of a full-scale experiment pp. 94-103

A. Bernstad, J. la Cour Jansen and A. Aspegren

Moving down the cause-effect chain of water and land use impacts: An LCA case study of textile fibres pp. 104-113

Gustav Sandin, Greg M. Peters and Magdalena Svanström

Laboratory and field evaluation of recycled content sign posts pp. 114-121

Ali O. Atahan and Ayhan O. Yucel

Inexact two-stage stochastic credibility constrained programming for water quality management pp. 122-132

Zhong Li, Gordon Huang, Yimei Zhang and Yongping Li

The paradox of packaging optimization – a characterization of packaging source reduction in the Netherlands pp. 133-142

Mariësse A.E. van Sluisveld and Ernst Worrell

Urban solid waste plant treatment in Brazil: Is there a net emergy yield on the recovered materials? pp. 143-155

Feni Agostinho, Cecília M.V.B. Almeida, Silvia H. Bonilla, José B. Sacomano and Biagio F. Giannetti

Development of blending chart for different degrees of blending of RAP binder and virgin binder pp. 156-161

Prashant Shirodkar, Yusuf Mehta, Aaron Nolan, Eric Dubois, Darren Reger and Leslie McCarthy

A critical analysis of the sustainability of mobile phone use pp. 162-171

Annarita Paiano, Giovanni Lagioia and Andrea Cataldo

An analysis of water management in Brazilian petroleum refineries using rationalization techniques pp. 172-179

Felipe Ramalho Pombo, Alessandra Magrini and Alexandre Szklo

Quantifying the impacts of primary metal resource use in life cycle assessment based on recent mining data pp. 180-187

Pilar Swart and Jo Dewulf

Assessing environmental impacts of municipal solid waste of Johor by analytical hierarchy process pp. 188-196

Ahmad Halilu Abba, Zainura Zainon Noor, Rafiu O. Yusuf, Mohd Fadhil M.D. Din and Mohd Ariffin Abu Hassan

Risk explicit interval linear programming model for long-term planning of vehicle recycling in the EU legislative context under uncertainty pp. 197-210

Vladimir Simic and Branka Dimitrijevic

Critical aspects in the life cycle assessment (LCA) of bio-based materials – Reviewing methodologies and deriving recommendations pp. 211-228

P. Pawelzik, M. Carus, J. Hotchkiss, R. Narayan, S. Selke, M. Wellisch, M. Weiss, B. Wicke and M.K. Patel

Nickel recovery/removal from industrial wastes: A review pp. 229-238

V. Coman, B. Robotin and P. Ilea

Revealing an invisible giant: A comprehensive survey into return practices within original (closed-loop) supply chains pp. 239-250

Harold Krikke, Dianne Hofenk and Yacan Wang