Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 57, issue C, 2011

A novel covering approach to positioning ELV collection points pp. 1-9

Milorad Vidovic, Branka Dimitrijevic, Branislava Ratkovic and Vladimir Simic

Development of a mathematical model for the quantification of fog-collection pp. 10-14

Monzur Alam Imteaz, Ghassan Al-hassan, Abdallah Shanableh and Jamal Naser

A comparison of ELV recycling system in China and Japan and China's strategies pp. 15-21

Qinghua Zhao and Ming Chen

A life cycle assessment of end-of-life computer monitor management in the Seattle metropolitan region pp. 22-29

Michael S. Noon, Seung-Jin Lee and Joyce S. Cooper

Utilization of silica fume in concrete: Review of durability properties pp. 30-35

Mohammad Iqbal Khan and Rafat Siddique

LCA of bioenergy chains in Piedmont (Italy): A case study to support public decision makers towards sustainability pp. 36-47

G.A. Blengini, E. Brizio, M. Cibrario and G. Genon

The technical potential for reducing metal requirements through lightweight product design pp. 48-60

Mark A. Carruth, Julian M. Allwood and Muiris C. Moynihan

An estimation of the effectiveness of waste prevention by using point-of-sales (POS) data—The case of refills for shampoo and hair conditioner in Japan pp. 61-66

T. Tasaki and H. Yamakawa

Scenarios for the implementation of EU waste legislation at national level and their consequences for emissions from municipal waste incineration pp. 67-77

Dominik Saner, Yann B. Blumer, Daniel J. Lang and Annette Koehler

The future distribution and production of global phosphate rock reserves pp. 78-86

James Cooper, Rachel Lombardi, David Boardman and Cynthia Carliell-Marquet

Boundaries matter: Greenhouse gas emission reductions from alternative waste treatment strategies for California's municipal solid waste pp. 87-97

Sintana E. Vergara, Anders Damgaard and Arpad Horvath

Assessment of health-care waste treatment alternatives using fuzzy multi-criteria decision making approaches pp. 98-107

Mehtap Dursun, E. Ertugrul Karsak and Melis Almula Karadayi

Health care waste management in Cameroon: A case study from the Southwestern Region pp. 108-116

Veronica E. Manga, Osric Tening Forton, Linus A. Mofor and Ryan Woodard

Volume 56, issue 1, 2011

Influence of residential water use efficiency measures on household water demand: A four year longitudinal study pp. 1-6

Mengshan Lee, Berrin Tansel and Maribel Balbin

An AHP-based fuzzy interval TOPSIS assessment for sustainable expansion of the solid waste management system in Setúbal Peninsula, Portugal pp. 7-21

Ana Pires, Ni-Bin Chang and Graça Martinho

Estimation of the cementitious properties of various industrial by-products for applications requiring low mechanical strength pp. 22-33

Olivier Peyronnard and Mostafa Benzaazoua

Evaluation of electrodialysis for scaling prevention of nanofiltration membranes at high water recoveries pp. 34-42

Steven Van Geluwe, Leen Braeken, Thomas Robberecht, Maarten Jans, Claude Creemers and Bart Van der Bruggen

Price linkages in the copper futures, primary, and scrap markets pp. 43-47

Kentaka Aruga and Shunsuke Managi

Preparation of high performance blended cements and reclamation of iron concentrate from basic oxygen furnace steel slag pp. 48-55

Tongsheng Zhang, Qijun Yu, Jiangxiong Wei, Jianxin Li and Pingping Zhang

Considerations of resource availability in technology development strategies: The case study of photovoltaics pp. 56-65

Anton Zuser and Helmut Rechberger

Effect of volcanic ash on the properties of cement paste and mortar pp. 66-70

Rafat Siddique

Energetic and environmental benefits of co-digestion of food waste and cattle slurry: A preliminary assessment pp. 71-79

Charles J. Banks, Andrew M. Salter, Sonia Heaven and Keith Riley

Reliability analysis of rainwater tanks in Melbourne using daily water balance model pp. 80-86

Monzur Alam Imteaz, Amimul Ahsan, Jamal Naser and Ataur Rahman

Feasibility assessment of recycled water use for washing machines in Australia through SWOT analysis pp. 87-91

Bandita Mainali, Huu Hao Ngo, Wenshan Guo, Thi Thu Nga Pham and Archie Johnston

Life cycle assessment of biogas digestate processing technologies pp. 92-104

T. Rehl and J. Müller

Application of GIS-based multi-criteria analysis for site selection of aquifer recharge with reclaimed water pp. 105-116

Francisco Pedrero, António Albuquerque, Helena Marecos do Monte, Victor Cavaleiro and Juan José Alarcón

Environmental performance of a XIV Century water management system: An emergy evaluation of cultural heritage pp. 117-125

B. Rugani, R.M. Pulselli, V. Niccolucci and S. Bastianoni

What determines the success of joint forest management? Science-based lessons on sustainable governance of forests in India pp. 126-133

Vijai Shanker Singh, Deep Narayan Pandey and Neha Pandey Prakash

Substance flow analysis of zinc cycle and current status of electric arc furnace dust management for zinc recovery in Taiwan pp. 134-140

Hwong-wen Ma, Kazuyo Matsubae, Kenichi Nakajima, Min-Shing Tsai, Kung-Hsien Shao, Pi-Cheng Chen, Chia-Ho Lee and Tetsuya Nagasaka

Volume 55, issue 12, 2011

Assessment of the overall resource consumption of germanium wafer production for high concentration photovoltaics pp. 1119-1128

Pilar Swart, Jo Dewulf, Herman Van Langenhove, Koen Moonens, Kristof Dessein and Carl Quaeyhaegens

Modelling municipal waste separation rates using generalized linear models and beta regression pp. 1129-1138

M.V. Ibáñez, M. Prades and A. Simó

Conservation of resources in the pulp and paper industry derived from cleaner production approach pp. 1139-1145

Darja B. Žarković, Vladana N. Rajaković-Ognjanović and Ljubinka V. Rajaković

Closing the phosphorus loop in England: The spatio-temporal balance of phosphorus capture from manure versus crop demand for fertiliser pp. 1146-1153

Anna Bateman, Dan van der Horst, David Boardman, Arun Kansal and Cynthia Carliell-Marquet

Column Flotation Deinking: State-of-the-art and opportunities pp. 1154-1177

Subhashini Vashisth, Chad P.J. Bennington, John R. Grace and Richard J. Kerekes

A quantitative estimate of potential aluminium recovery from incineration bottom ashes pp. 1178-1184

Mario Grosso, Laura Biganzoli and Lucia Rigamonti

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors pp. 1185-1195

Rachel L. Milford, Julian M. Allwood and Jonathan M. Cullen

Impact of closed-loop network configurations on carbon footprints: A case study in copiers pp. 1196-1205

Harold Krikke

Material flow analysis of paper in Korea. Part I. Data calculation model from the flow relationships between paper products pp. 1206-1213

Seok-jin Hong, Yoon-sil Choi, Kyoung-ryun Kim, Joon-gu Kang, Gil-jong Oh and Tak Hur

Addition of X-ray fluorescent tracers into polymers, new technology for automatic sorting of plastics: Proposal for selecting some relevant tracers pp. 1214-1221

Feliks Bezati, Daniel Froelich, Valérie Massardier and Elisabeth Maris

Life-Cycle Impact Assessment of oil drilling mud system in Algerian arid area pp. 1222-1231

Malika Ghazi, Gaetana Quaranta, Joelle Duplay, Raja Hadjamor, Mohamed Khodja, Hamid Ait Amar and Zoubir Kessaissia

Sustainable options of post treatment of UASB effluent treating sewage: A review pp. 1232-1251

Abid Ali Khan, Rubia Zahid Gaur, V.K. Tyagi, Anwar Khursheed, Beni Lew, Indu Mehrotra and A.A. Kazmi

Construction and demolition waste generation and management in Lisbon (Portugal) pp. 1252-1264

Aluísio Braz De Melo, Arlindo F. Gonçalves and Isabel M. Martins

Embodied energy and CO2 in UK dimension stone pp. 1265-1273

N. Crishna, P.F.G. Banfill and S. Goodsir

Volume 55, issue 11, 2011

Twenty years of PET bottle to bottle recycling—An overview pp. 865-875

Frank Welle

Selection and validation of indicators for programs selective collection evaluation with social inclusion pp. 876-884

J.R. Bringhenti, E. Zandonade and W.M.R. Günther

Utilization of waste foundry sand (WFS) in concrete manufacturing pp. 885-892

Rafat Siddique and Gurpreet Singh

A review on tertiary recycling of high-density polyethylene to fuel pp. 893-910

Sachin Kumar, Achyut K. Panda and R.K. Singh

Taxing virgin natural resources: Lessons from aggregates taxation in Europe pp. 911-922

Patrik Söderholm

Utilization of silica fume in concrete: Review of hardened properties pp. 923-932

Rafat Siddique

A system dynamics model for evaluating the alternative of type in construction and demolition waste recycling center – The case of Chongqing, China pp. 933-944

W. Zhao, H. Ren and V.S. Rotter

Quantification of potable water savings by residential water conservation and reuse – A case study pp. 945-952

Shobha Muthukumaran, Kanagaratnam Baskaran and Nicole Sexton

Car wash wastewater reclamation. Full-scale application and upcoming features pp. 953-959

Rafael Zaneti, Ramiro Etchepare and Jorge Rubio

Potential for electricity savings by reducing potable water consumption in a city scale pp. 960-965

Lúcio Costa Proença, Enedir Ghisi, Davi da Fonseca Tavares and Gabriel Marcon Coelho

Overview of non-hazardous solid waste in the small island state of Mauritius pp. 966-972

Rajendra Kumar Foolmaun, Dinkar Sharma Chamilall and Girish Munhurrun

Waste-based composites—Poverty reducing solutions to environmental problems pp. 973-978

Caroline Baillie, Darko Matovic, Thimothy Thamae and Shanil Vaja

Location set covering for waste resource recycling centers in Taiwan pp. 979-985

Lin Ye, Chunming Ye and Yi-Fei Chuang

Analysis of the recycling potential of used automotive oil filters using the Life Cycle Assessment approach pp. 986-994

Georgios Gaidajis, Komninos Angelakoglou, Pantelis N. Botsaris and Faidra Filippidou

Environmental assessment of different management options for individual waste fractions by means of life-cycle assessment modelling pp. 995-1004

Simone Manfredi, Davide Tonini and Thomas H. Christensen

Environmental assessment of dehydrated alfalfa production in Spain pp. 1005-1012

Alejandro Gallego, Almudena Hospido, María Teresa Moreira and Gumersindo Feijoo

Perceptions, attitudes and interest of Swedish architects towards the use of wood frames in multi-storey buildings pp. 1013-1021

Kerstin Hemström, Krushna Mahapatra and Leif Gustavsson

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia pp. 1022-1029

Monzur Alam Imteaz, Abdallah Shanableh, Ataur Rahman and Amimul Ahsan

The issue of sustainability and disclosure. A case study of selective garbage collection by the Urban Cleaning Service of the city of Rio de Janeiro, Brazil – COMLURB pp. 1030-1038

Márcia da Silva Carvalho, Luiz Pinguelli Rosa, André Luiz Bufoni and Araceli Cristina de Sousa Ferreira

Decisions on recycling: Construction stakeholders’ decisions regarding recycled mineral construction materials pp. 1039-1050

Christof Knoeri, Claudia R. Binder and Hans-Joerg Althaus

The influence of collection facility attributes on household collection rates of electronic waste: The case of televisions and computer monitors pp. 1051-1059

Rachel Bouvier and Travis Wagner

Balancing durability and environmental impact in concrete combining low-grade recycled aggregates and mineral admixtures pp. 1060-1069

Michael Henry, German Pardo, Tsugio Nishimura and Yoshitaka Kato

Influence of allocation methods on the environmental performance of biorefinery products—A case study pp. 1070-1077

Francesco Cherubini, Anders Hammer Strømman and Sergio Ulgiati

Environmental impact of meat meal fertilizer vs. chemical fertilizer pp. 1078-1086

J. Spångberg, P.-A. Hansson, P. Tidåker and H. Jönsson

Predicting future quantities of obsolete household appliances in Nanjing by a stock-based model pp. 1087-1094

Ling Zhang, Zengwei Yuan and Jun Bi

Effect of collection system on mineral content of biowaste pp. 1095-1099

Oscar Huerta-Pujol, Montserrat Gallart, Montserrat Soliva, F. Xavier Martínez-Farré and Marga López

Economic and financial analysis on rainwater harvesting for agricultural irrigation in the rural areas of Beijing pp. 1100-1108

Xiao Liang and Meine Pieter van Dijk

Environmental and socio-economic assessment of co-combustion of coal, biomass and non-hazardous wastes in a Power Plant pp. 1109-1118

J. Morais, R. Barbosa, N. Lapa, B. Mendes and I. Gulyurtlu

Volume 55, issue 9, 2011

Life-cycle assessment of pavements. Part I: Critical review pp. 801-809

Nicholas J. Santero, Eric Masanet and Arpad Horvath

Life-cycle assessment of pavements Part II: Filling the research gaps pp. 810-818

Nicholas J. Santero, Eric Masanet and Arpad Horvath

Arsenic hazards in coal fly ash and its fate in Indian scenario pp. 819-835

Vimal Chandra Pandey, Jay Shankar Singh, Rana P. Singh, Nandita Singh and M. Yunus

Determining the effectiveness of the Danish packaging tax policy: The case of paper and paperboard packaging imports pp. 836-841

Enian Cela and Shinji Kaneko

A renewable flocculant from a poultry slaughterhouse waste and preliminary estimate of production costs pp. 842-848

G.J. Piazza, A.J. McAloon and R.A. Garcia

Assessing nutrient fluxes in a Vietnamese rural area despite limited and highly uncertain data pp. 849-856

Nga Do-Thu, Antoine Morel, Hung Nguyen-Viet, Phuc Pham-Duc, Kei Nishida and Thammarat Kootattep

Social acceptance for the development of a waste-to-energy plant in an urban area pp. 857-863

Ch. Achillas, Ch. Vlachokostas, N. Moussiopoulos, G. Banias, G. Kafetzopoulos and A. Karagiannidis

Volume 55, issue 8, 2011

Use of silicon and ferrosilicon industry by-products (silica fume) in cement paste and mortar pp. 739-744

Rafat Siddique and Navneet Chahal

An overview for the utilization of wastes from stainless steel industries pp. 745-754

Zhang Huaiwei and Hong Xin

Application of digital technologies about water network in steel industry pp. 755-759

Jiangwei Wang, Suqin Li, Guohong Xiong and Daqiang Cang

The influence of iron flow on iron resource efficiency in the steel manufacturing process pp. 760-771

Dai Tiejun

Thermogravimetric pyrolysis of waste polyethylene-terephthalate and polystyrene: A critical assessment of kinetics modelling pp. 772-781

Anke Brems, Jan Baeyens, Johan Beerlandt and Raf Dewil

Junk mail in residential homes in the United States: Insights from a sub-urban home in California pp. 782-784

Oscar Wambuguh

Assessment of properties of Tunisian agricultural waste composts: Application as components in reconstituted anthropic soils and their effects on tomato yield and quality pp. 785-792

Manel Kammoun Rigane and Khaled Medhioub

Biomass production for bioenergy using recycled wastewater in a natural waste treatment system pp. 793-800

Clifford B. Fedler and Runbin Duan

Volume 55, issue 7, 2011

The implementation of wood waste ash as a partial cement replacement material in the production of structural grade concrete and mortar: An overview pp. 669-685

Chee Ban Cheah and Mahyuddin Ramli

Cost-efficiency of rainwater harvesting strategies in dense Mediterranean neighbourhoods pp. 686-694

R. Farreny, X. Gabarrell and J. Rieradevall

How does the operational environment affect utility performance? A parametric study on the waste sector pp. 695-702

Pedro Simões and Rc Marques

Quantifying ‘geographic proximity’: Experiences from the United Kingdom's National Industrial Symbiosis Programme pp. 703-712

Paul D. Jensen, Lauren Basson, Emma E. Hellawell, Malcolm R. Bailey and Matthew Leach

Industry to Industry By-products Exchange Network towards zero waste in palm oil refining processes pp. 713-718

H. Haslenda and M.Z. Jamaludin

Management of urban solid waste: Vermicomposting a sustainable option pp. 719-729

Rajeev Pratap Singh, Pooja Singh, Ademir S.F. Araujo, M. Hakimi Ibrahim and Othman Sulaiman

Emergy-based fuzzy optimization approach for water reuse in an eco-industrial park pp. 730-737

Mohammad Sadegh Taskhiri, Raymond R. Tan and Anthony S.F. Chiu

Volume 55, issue 6, 2011

Green management practices and firm performance: A case of container terminal operations pp. 559-566

Y.H. Venus Lun

Development of key performance measures for the automobile green supply chain pp. 567-579

Ezutah Udoncy Olugu, Kuan Yew Wong and Awaludin Mohamed Shaharoun

Performance improvement potential of sensor embedded products in environmental supply chains pp. 580-592

Mehmet Ali Ilgin and Surendra M. Gupta

Designing a mixed performance measurement system for environmental supply chain management using evolutionary game theory and balanced scorecard: A case study of an auto industry supply chain pp. 593-603

Seyed Gholamreza Jalali Naini, Ali Reza Aliahmadi and Meisam Jafari-Eskandari

A model for cost–benefit analysis of construction and demolition waste management throughout the waste chain pp. 604-612

H.P. Yuan, L.Y. Shen, Jane J.L. Hao and W.S. Lu

Development pattern and enhancing system of automotive components remanufacturing industry in China pp. 613-622

Tongzhu Zhang, Jiangwei Chu, Xueping Wang, Xianghai Liu and Pengfei Cui

An institutional theoretic investigation on the links between internationalization of Chinese manufacturers and their environmental supply chain management pp. 623-630

Qinghua Zhu, Joseph Sarkis and Kee-hung Lai

Green shipping practices in the shipping industry: Conceptualization, adoption, and implications pp. 631-638

Kee-Hung Lai, Venus Y.H. Lun, Christina W.Y. Wong and T.C.E. Cheng

Optimal production and pricing policy for a closed loop system pp. 639-647

Jianmai Shi, Guoqing Zhang and Jichang Sha

The causes of food waste in the supplier–retailer interface: Evidences from the UK and Spain pp. 648-658

Carlos Mena, B. Adenso-Diaz and Oznur Yurt

An analysis of the drivers affecting the implementation of green supply chain management pp. 659-667

Ali Diabat and Kannan Govindan

Volume 55, issue 5, 2011

Green supply chain initiatives among certified companies in Malaysia and environmental sustainability: Investigating the outcomes pp. 495-506

Tarig K. Eltayeb, Suhaiza Zailani and T. Ramayah

The separation of reinforced cementitious composites with a stream-line cutting tool pp. 507-514

A.W. Momber, E. Budidharma and R. Tjo

Incorporation of neural network analysis into a technique for automatically sorting lightweight metal scrap generated by ELV shredder facilities pp. 515-523

Shigeki Koyanaka and Kenichiro Kobayashi

Characterization of MSWI fly ash through mineralogy and water extraction pp. 524-534

Athanasius P. Bayuseno and Wolfgang W. Schmahl

Responses of community to the possible use of recycled water for washing machines: A case study in Sydney, Australia pp. 535-540

Thi Thu Nga Pham, Huu Hao Ngo, Wenshan Guo, Ho Phuong Dung Dang, Bandita Mainali, Archie Johnston and Andrzej Listowski

Utilisation of steel slags as neutralising agents in biooxidation of a refractory gold concentrate and their influence on the subsequent cyanidation pp. 541-547

Chandra Sekhar Gahan, Jan-Eric Sundkvist, Fredrik Engström and Åke Sandström

Household organic waste composting using bins with different types of passive aeration pp. 548-553

Somjai Karnchanawong and Nakorn Suriyanon

Retail waste of horticultural products in Sweden pp. 554-556

Jenny Gustavsson and Jesper Stage

Volume 55, issue 4, 2011

Recycling, reuse and energetic valuation of meat industry wastes in Extremadura (Spain) pp. 393-399

Francisco Cuadros, Fernando López-Rodríguez, Antonio Ruiz-Celma, Fernando Rubiales and Almudena González-González

Human urine as a source of alternative natural fertilizer in agriculture: A flight of fancy or an achievable reality pp. 400-408

Tanmoy Karak and Pradip Bhattacharyya

Recovery of biomass wastes by hydrolysis in sub-critical water pp. 409-416

Guangyong Zhu, Xian Zhu, Qi Fan and Xueliang Wan

Reject management from a Mechanical Biological Treatment plant in Bangkok, Thailand pp. 417-422

Jidapa Nithikul, Obuli. P. Karthikeyan and C. Visvanathan

Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option pp. 423-434

R.P. Singh, A. Embrandiri, M.H. Ibrahim and N. Esa

Utilising of the oiled rolling mills scale in iron ore sintering process pp. 435-440

Volodymyr I. Shatokha, Oleg O. Gogenko and Stanislav M. Kripak

Inexact credibility constrained programming for environmental system management pp. 441-447

Yi Mei Zhang and Guo He Huang

Cement and concrete flow analysis in a rapidly expanding economy: Ireland as a case study pp. 448-455

Rachel Woodward and Noel Duffy

Dynamic material flow analysis of steel resources in Korea pp. 456-462

Jeong-a Park, Seok-jin Hong, Ik Kim, Ji-yong Lee and Tak Hur

General vs. domain specific recycling behaviour—Applying a multilevel comprehensive action determination model to recycling in Norwegian student homes pp. 463-471

Christian Andreas Klöckner and Inger Olin Oppedal

Optimization of the recovery of plastics for recycling by density media separation cyclones pp. 472-482

Gent Malcolm Richard, Menendez Mario, Toraño Javier and Torno Susana

Evaluating the impacts of packaging policy in The Netherlands pp. 483-492

Magda Rouw and Ernst Worrell

Volume 55, issue 3, 2011

Global disposal strategies for waste cathode ray tubes pp. 275-290

I.C. Nnorom, O. Osibanjo and M.O.C. Ogwuegbu

PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling pp. 291-299

T.M. Coelho, R. Castro and J.A. Gobbo

A comprehensive set of resource use indicators from the micro to the macro level pp. 300-308

Stefan Giljum, Eva Burger, Friedrich Hinterberger, Stephan Lutter and Martin Bruckner

A mechanical pre-treatment process for the valorization of useful fractions from spent batteries pp. 309-315

B. Ruffino, M.C. Zanetti and P. Marini

Taking advantage of storm and waste water retention basins as part of water use minimization in industrial sites pp. 316-324

Karla Patricia Oliveira-Esquerre, Asher Kiperstok, Mario Cezar Mattos, Eduardo Cohim, Ricardo Kalid, Emerson Andrade Sales and Victor Matta Pires

Waste separation at home: Are Japanese municipal curbside recycling policies efficient? pp. 325-334

Shigeru Matsumoto

A critical review of a key Waste Strategy Initiative in England: Zero Waste Places Projects 2008–2009 pp. 335-343

Paul S. Phillips, Terry Tudor, Helen Bird and Margaret Bates

Sustainable recycling model: A comparative analysis between India and Tanzania pp. 344-355

Bob Jan Schoot Uiterkamp, Hossein Azadi and Peter Ho

Water conservation due to greywater treatment and reuse in urban setting with specific context to developing countries pp. 356-361

Deepika Mandal, Pawan Labhasetwar, Shankar Dhone, Ajay Shankar Dubey, Gangadhar Shinde and Satish Wate

Material efficiency: A white paper pp. 362-381

Julian M. Allwood, Michael F. Ashby, Timothy G. Gutowski and Ernst Worrell

Economic analysis of conventional versus selective demolition—A case study pp. 382-392

André Coelho and Jorge de Brito

Volume 55, issue 2, 2010

Use of municipal solid waste ash in concrete pp. 83-91

Rafat Siddique

End-of-life product-specific material flow analysis. Application to aluminum coming from end-of-life commercial vehicles in Europe pp. 92-105

Fabrice Mathieux and Daniel Brissaud

Life Cycle Assessment of fresh and canned mussel processing and consumption in Galicia (NW Spain) pp. 106-117

Diego Iribarren, Maria Teresa Moreira and Gumersindo Feijoo

A case study of the open-loop recycling of mixed plastic waste for use in a sports-field drainage system pp. 118-128

Thomas G.J.L. Williams, Oliver Heidrich and Paul J. Sallis

Studies on environmental quality in and around municipal solid waste dumpsite pp. 129-134

Arun Kanti Biswas, Sunil Kumar, S. Satheesh Babu, Jayanta Kumar Bhattacharyya and Tapan Chakrabarti

Down to Earth: An illustration of life cycle inventory good practice with reference to the production of soil conditioning compost pp. 135-147

John Butler and Paul Hooper

Laundry water recycling in ship by direct nanofiltration with tubular membranes pp. 148-154

Julie Guilbaud, Anthony Massé, Yves Andrès, François Combe and Pascal Jaouen

Composition and energy content of dental solid waste pp. 155-160

Mohamad I. Al-Widyan, Rami J. Oweis, Hani Abu-Qdais, Mutaz Al-Muhtaseb and Hamasha, Sa’d

Farmers perception and economic benefits of excreta use in southern Ghana pp. 161-166

O. Cofie, A. Adeoti, F. Nkansah-Boadu and E. Awuah

Recycling of packaging multilayer films: New materials for technical products pp. 167-170

Zenon Tartakowski

Approaching compost stability from Klason lignin modified method: Chemical stability degree for OM and N quality assessment pp. 171-181

Marga López, Oscar Huerta-Pujol, F. Xavier Martínez-Farré and Montserrat Soliva

Emergy evaluation of the sustainability of two industrial systems based on wastes exchanges pp. 182-195

Xiao Hong Zhang, ShiHuai Deng, WenJu Jiang, YanZong Zhang, Hong Peng, Li Li, Gang Yang and YuanWei Li

In-use stock analysis using satellite nighttime light observation data pp. 196-200

Kazue Ichino Takahashi, Ryutaro Terakado, Jiro Nakamura, Yoshihiro Adachi, Christopher D. Elvidge and Yasunari Matsuno

Exploring critical success factors for waste management in construction projects of China pp. 201-208

Weisheng Lu and Hongping Yuan

An environmental and economic assessment of topsoil production from dredge material pp. 209-220

C. Sheehan, J. Harrington and J.D. Murphy

Treated wastewater reuse in South Africa: Overview, potential and challenges pp. 221-231

J.R. Adewumi, A.A. Ilemobade and J.E. Van Zyl

A life cycle environmental impact assessment of oil shale produced and consumed in Estonia pp. 232-245

Olga Gavrilova, Raivo Vilu and Leo Vallner

Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective pp. 246-259

David Lazarevic, Emmanuelle Aoustin, Nicolas Buclet and Nils Brandt

Environmental impact assessment of man-made cellulose fibres pp. 260-274

Li Shen, Ernst Worrell and Martin K. Patel

Volume 55, issue 1, 2010

A critical review of the largest Resource Efficiency Club Programme in England (2005–2008): Key issues for designing and delivering cost effective policy instruments in the light of Defra's Delivery Landscape Review pp. 1-10

Lisa T. Mattsson, Adam D. Read and Paul S. Phillips

Management of used & end-of-life mobile phones in Korea: A review pp. 11-19

Yong-Chul Jang and Mincheol Kim

Material flow accounting of the copper cycle in Brazil pp. 20-28

Armando H. Tanimoto, Xavier Gabarrell Durany, Gara Villalba and Armando Caldeira Pires

Performances comparison between laboratory and full-scale anaerobic digesters treating a mixture of primary and waste activated sludge pp. 29-33

H. Bouallagui, L. Marouani and M. Hamdi

Open-loop recycling: A LCA case study of PET bottle-to-fibre recycling pp. 34-52

Li Shen, Ernst Worrell and Martin K. Patel

Socio-technical transitions in water scarcity contexts: Public acceptance of greywater reuse technologies in the Metropolitan Area of Barcelona pp. 53-62

Laia Domènech and David Saurí

Capacity-cost and location-cost analyses for biogas plants in Africa pp. 63-73

B. Amigun and H. von Blottnitz

Solar air conditioning systems and their applicability—An exergy approach pp. 74-82

C. Koroneos, E. Nanaki and G. Xydis