Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 49, issue 4, 2007

Energy consumption comparison for different asphalt pavements rehabilitation techniques used in Chile pp. 325-339

Guillermo Thenoux, Álvaro González and Rafael Dowling

Reducing climate change gas emissions by cutting out stages in the life cycle of office paper pp. 340-352

Thomas A.M. Counsell and Julian M. Allwood

Biodegradable municipal waste (BMW) management strategy in Ireland: A comparison with some key issues in the BMW strategy being adopted in England pp. 353-371

Anne J. Morrissey and Paul S. Phillips

Assessing instruments for mixed household solid waste collection services in the Flemish region of Belgium pp. 372-387

Xavier Gellynck and Pieter Verhelst

Local recycling of plant nutrients from small-scale wastewater systems to farmland—A Swedish scenario study pp. 388-405

P. Tidåker, C. Sjöberg and H. Jönsson

Metal capital sustaining a North American city: Iron and copper in New Haven, CT pp. 406-420

Konstantine Drakonakis, Katherine Rostkowski, Jason Rauch, T.E. Graedel and R.B. Gordon

A European model for waste and material flows pp. 421-435

Frits Møller Andersen, Helge Larsen, Mette Skovgaard, Stephan Moll and Stéphane Isoard

Conversion of leather wastes to useful products pp. 436-448

Onur Yılmaz, I. Cem Kantarli, Mithat Yuksel, Mehmet Saglam and Jale Yanik

Volume 49, issue 3, 2007

Progress of petroleum coke combusting in circulating fluidized bed boilers—A review and future perspectives pp. 203-216

Jihui Chen and Xiaofeng Lu

Analysis of key patents of the regeneration of acidic cupric chloride etchant waste and tin stripping waste pp. 217-243

Tiina Keskitalo, Juha Tanskanen and Toivo Kuokkanen

Environmental and economic modelling: A case study of municipal solid waste management scenarios in Wales pp. 244-263

Andrew Emery, Anthony Davies, Anthony Griffiths and Keith Williams

Assessing the composition of municipal solid waste in Wales pp. 264-283

S.J. Burnley, J.C. Ellis, R. Flowerdew, A.J. Poll and H. Prosser

ITCLP: An inexact two-stage chance-constrained program for planning waste management systems pp. 284-307

Y.P. Li, G.H. Huang, S.L. Nie and X.S. Qin

The participation of ethnic minorities in kerbside recycling: A case study pp. 308-323

G.D.R. Perry and I.D. Williams

Volume 49, issue 2, 2006

Risks to health and environment of the use of lead in products in the EU pp. 89-109

Arnold Tukker, Harrie Buist, Lauran van Oers and Ester van der Voet

Waste characterization as an element of waste management planning: Lessons learned from a study in Siem Reap, Cambodia pp. 110-128

Kate Parizeau, Virginia Maclaren and Lay Chanthy

Life cycle assessment of BMT-based integrated municipal solid waste management: Case study in Pudong, China pp. 129-146

R.J. Hong, G.F. Wang, R.Z. Guo, X. Cheng, Q. Liu, P.J. Zhang and G.R. Qian

Estimation and forecasting of concrete debris amount in China pp. 147-158

Jianguang Shi and Yuezhou Xu

Material and money flows as a means for industry analysis of recycling schemes pp. 159-190

Daniel J. Lang, Claudia R. Binder, Michael Stauffacher, Christian Ziegler, Konrad Schleiss and Roland W. Scholz

Recycling oil and steel from grinding swarf pp. 191-201

James I. Chang, J.J. Lin, J.S. Huang and Y.M. Chang

Volume 49, issue 1, 2006

Re-utilisation conditions of wastewaters from textiles industries pp. 1-13

Selene Maria de Arruda Guelli Ulson de Souza, Aline Resmini Melo and Antônio Augusto Ulson de Souza

Recycling MgO-C refractory in electric arc furnaces pp. 14-31

A.N. Conejo, R.G. Lule, F. Lopéz and R. Rodriguez

Life cycle assessment of two biowaste management systems for Barcelona, Spain pp. 32-48

Leonor Patricia Güereca, Santiago Gassó, José María Baldasano and Pedro Jiménez-Guerrero

Incorporation of reverse logistics model into in-plant recycling process: A case of aluminium industry pp. 49-67

Klavdij Logožar, Gregor Radonjič and Majda Bastič

Optimising waste treatment systems pp. 68-88

Veronika Dornburg, André P.C. Faaij and Berry Meuleman

Volume 48, issue 4, 2006

Innovative methodologies for the utilisation of wastes from metallurgical and allied industries pp. 301-314

Sanjay Kumar, Rakesh Kumar and Amitava Bandopadhyay

Utilization of cement kiln dust (CKD) in cement mortar and concrete—an overview pp. 315-338

Rafat Siddique

Recycling contaminated soil as alternative raw material in cement facilities: Life cycle assessment pp. 339-356

R. Navia, B. Rivela, K.E. Lorber and Rodolfo Méndez-Marcano

Social, cultural and structural influences on household waste recycling: A case study pp. 357-395

M. Martin, I.D. Williams and M. Clark

Recovery of foundry sands and iron fractions from an industrial waste landfill pp. 396-411

Mariachiara Zanetti and Alberto Godio

Volume 48, issue 3, 2006

Effects of de-inking paper sludge on growth and nutritional status of alder and aspen pp. 209-226

Patrick Filiatrault, Claude Camiré, Jeffrey P. Norrie and Chantal J. Beauchamp

Optimising waste treatment systems pp. 227-248

Veronika Dornburg and André P.C. Faaij

Contribution to resource conservation by reuse of electrical and electronic household appliances pp. 249-262

Nina Truttmann and Helmut Rechberger

Quantitative analysis of recyclable materials composition: Tools to support decision making in kerbside recycling pp. 263-279

Peter J. Shaw, Joanne K. Lyas and Malcolm D. Hudson

A proposal for emission calculations for chemical processes, Part I pp. 280-299

Gara Villalba, Leslie Ayres and Robert U. Ayres

Volume 48, issue 2, 2006

Soil indicators used in road environmental impact assessments pp. 101-124

Agnès Jullien and Denis François

Estimation of resource savings due to fly ash utilization in road construction pp. 125-140

Subodh Kumar and C.B. Patil

Assessing the recycling efficiency of copper from end-of-life products in Western Europe pp. 141-165

Martin Ruhrberg

Socioeconomic metabolism in Taiwan: Emergy synthesis versus material flow analysis pp. 166-196

Shu-Li Huang, Chun-Lin Lee and Chia-Wen Chen

A waste management school approach towards sustainability pp. 197-207

M.G.F. Sales, C. Delerue-Matos, I.B. Martins, I. Serra, M.R. Silva and S. Morais

Volume 48, issue 1, 2006

Effects of recycled concrete aggregates on properties of asphalt concrete pp. 1-12

Sumeda Paranavithana and Abbas Mohajerani

Balancing the life cycle impacts of notebook computers: Taiwan's experience pp. 13-25

Li-Teh Lu, Iddo K. Wernick, Teng-Yuan Hsiao, Yue-Hwa Yu, Ya-Mei Yang and Hwong-Wen Ma

Environmental systems analysis of the use of bottom ash from incineration of municipal waste for road construction pp. 26-40

Susanna Olsson, Erik Kärrman and Jon Petter Gustafsson

The economics of urban solid waste reduction in educational institutions in Mexico: A 3-year experience pp. 41-55

L. Maldonado

Emergy evaluation of combined heat and power plant eco-industrial park (CHP plant EIP) pp. 56-70

Lingmei Wang, Weidou Ni and Zheng Li

Comparison of four methods for integrating environmental and economic aspects in the end-of-life stage of a washing machine pp. 71-85

Pil-Ju Park, Kiyotaka Tahara, In-Tae Jeong and Kun-Mo Lee

A benefit–cost analysis on the economic feasibility of construction waste minimisation: The case of Malaysia pp. 86-98

Rawshan Ara Begum, Chamhuri Siwar, Joy Jacqueline Pereira and Abdul Hamid Jaafar

Volume 47, issue 4, 2006

Wastewater management integrated with farming –an environmental systems analysis of a Swedish country town pp. 295-315

P. Tidåker, E. Kärrman, A. Baky and H. Jönsson

Waste minimization study in a solvent-based paint manufacturing plant pp. 316-331

Derya Dursun and Fusun Sengul

Energy and carbon balances of wood cascade chains pp. 332-355

Roger Sathre and Leif Gustavsson

Air emissions from pavement layers composed of varying rates of reclaimed asphalt pp. 356-374

Agnès Jullien, Pierre Monéron, Gaetana Quaranta and David Gaillard

Use of inert C&D materials for seawall foundation: A field-scale pilot test pp. 375-393

Albert T. Yeung, K.Y. Mok, L.G. Tham, P.K.K. Lee and Gordon Pei

Volume 47, issue 3, 2006

A review of electronics demanufacturing processes pp. 195-208

J.A.S. Williams

A review on the viable technology for construction waste recycling pp. 209-221

Vivian W.Y. Tam and C.M. Tam

Plastics materials flow analysis for India pp. 222-244

Nitin H. Mutha, Martin Patel and V. Premnath

Evaluating water resources availability and wastewater reuse importance in the water resources management of small Mediterranean municipal districts pp. 245-259

Thrassyvoulos Manios and Ioannis K. Tsanis

Assessment of industrial solid waste management and resource recovery practices in Tanzania pp. 260-276

Stephen E. Mbuligwe and Mengiseny E. Kaseva

The community waste sector and waste services in the UK: Current state and future prospects pp. 277-294

Liz Sharp and David Luckin

Volume 47, issue 2, 2006

Impact factors and regulatory mechanisms for material flow management: Integrating stakeholder and scientific perspectives pp. 101-132

Daniel J. Lang, Claudia R. Binder, Roland W. Scholz, Konrad Schleiss and Beat Stäubli

Justifications and self-organization as determinants of recycling behavior: The case of used batteries pp. 133-159

Ralf Hansmann, Petra Bernasconi, Timo Smieszek, Peter Loukopoulos and Roland W. Scholz

The future of the red metal—A developing country perspective from India pp. 160-182

Amit Kapur

Recycled pots using sweet potato distillation lees pp. 183-194

Masahito Yamauchi, Sumio Masuda and Masato Kihara

Volume 47, issue 1, 2006

Environmental assessment of shredder residue management pp. 1-25

Bob Boughton and Arpad Horvath

Use of natural zeolite at different doses and dosage procedures in batch and continuous anaerobic digestion of synthetic and swine wastes pp. 26-41

S. Montalvo, L. Guerrero, R. Borja, L. Travieso, E. Sánchez and F. Díaz

University community responses to on-campus resource recycling pp. 42-55

T.C. Kelly, I.G. Mason, M.W. Leiss and S. Ganesh

Environmental assessment of canned tuna manufacture with a life-cycle perspective pp. 56-72

A. Hospido, M.E. Vazquez, A. Cuevas, G. Feijoo and M.T. Moreira

Analysis of physical flows in primary commodity trade: A case study in China pp. 73-81

Tao Ma, Bo Li, Changming Fang, Bin Zhao, Yiqi Luo and Jiakuan Chen

The contemporary Latin America and the Caribbean zinc cycle: One year stocks and flows pp. 82-100

E.M. Harper, M. Bertram and T.E. Graedel