Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 106, issue C, 2016

Determinants of behavior toward selective collection of batteries in Spain. A bivariate probit model pp. 1-8

Fernando Arbués and Inmaculada Villanúa

Developing a quantitative construction waste estimation model for building construction projects pp. 9-20

Yashuai Li, Xueqing Zhang, Guoyu Ding and Zhouquan Feng

Recycling disaster waste: Feasibility, method and effectiveness pp. 21-32

Charlotte Brown and Mark Milke

Transcontinental assessment of secure rainwater harvesting systems across Australia pp. 33-47

Eric Laurentius Peterson

E-waste recycling processes in Indonesia, the Philippines, and Vietnam: A case study of cathode ray tube TVs and monitors pp. 48-58

Aya Yoshida, Atsushi Terazono, Florencio C. Ballesteros, Duc-Quang Nguyen, Sunandar Sukandar, Michikazu Kojima and Shozo Sakata

Environmental assessment of three different utilization paths of waste cooking oil from households pp. 59-67

Maria E. Ortner, Wolfgang Müller, Irene Schneider and Anke Bockreis

The relationship between municipal waste diversion incentivization and recycling system performance pp. 68-77

Calvin Lakhan

Towards a theory of sustainable consumption and production: Constructs and measurement pp. 78-89

Rameshwar Dubey, Angappa Gunasekaran, Stephen J. Childe, Thanos Papadopoulos, Samuel Fosso Wamba and Malin Song

Using individual householder survey responses to predict household environmental outcomes: The cases of recycling and water conservation pp. 90-97

Kelly S. Fielding, Yasmin van Kasteren, Winnifred Louis, Bernard McKenna, Sally Russell and Anneliese Spinks

Crunch the can or throw the bottle? Effect of “bottle deposit laws” and municipal recycling programs pp. 98-109

Benjamin Campbell, Hayk Khachatryan, Bridget Behe, Charles Hall and Jennifer Dennis

Drivers of food waste and their implications for sustainable policy development pp. 110-123

Krista L. Thyberg and David J. Tonjes

Volume 105, issue PB, 2015

Losses and use efficiencies along the phosphorus cycle. Part 1: Dilemmata and losses in the mines and other nodes of the supply chain pp. 216-234

Roland W. Scholz and Friedrich-Wilhelm Wellmer

Efficiency developments in phosphate rock mining over the last three decades pp. 235-245

Gerald Steiner, Bernhard Geissler, Ingrid Watson and Michael C. Mew

Efficiency performance of the world's leading corporations in phosphate rock mining pp. 246-258

Bernhard Geissler, Michael C. Mew, Olaf Weber and Gerald Steiner

Losses and use efficiencies along the phosphorus cycle – Part 2: Understanding the concept of efficiency pp. 259-274

Roland W. Scholz and Friedrich-Wilhelm Wellmer

Phosphorus use efficiency and management in agriculture pp. 275-281

Terry L. Roberts and A. Edward Johnston

Recognizing the role of soil organic phosphorus in soil fertility and water quality pp. 282-293

R.J. Dodd and A.N. Sharpley

Losses and efficiencies of phosphorus on a national level – A comparison of European substance flow analyses pp. 294-310

Michael Jedelhauser and Claudia R. Binder

Phosphorus in Denmark: National and regional anthropogenic flows pp. 311-324

Manfred Klinglmair, Camilla Lemming, Lars Stoumann Jensen, Helmut Rechberger, Thomas Fruergaard Astrup and Charlotte Scheutz

Overview and description of technologies for recovering phosphorus from municipal wastewater pp. 325-346

Lukas Egle, Helmut Rechberger and Matthias Zessner

Evaluation of local and national effects of recovering phosphorus at wastewater treatment plants: Lessons learned from the UK pp. 347-359

Rosanna Kleemann, Jonathan Chenoweth, Roland Clift, Stephen Morse, Pete Pearce and Devendra Saroj

Hidden phosphorus flows related with non-agriculture industrial activities: A focus on steelmaking and metal surface treatment pp. 360-367

Kazuyo Matsubae, Elizabeth Webeck, Keisuke Nansai, Kenichi Nakajima, Mikiya Tanaka and Tetsuya Nagasaka

Volume 105, issue PA, 2015

Overview of membrane technology applications for industrial wastewater treatment in China to increase water supply pp. 1-10

Xiang Zheng, Zhenxing Zhang, Dawei Yu, Xiaofen Chen, Rong Cheng, Shang Min, Jiangquan Wang, Qingcong Xiao and Jihua Wang

Making green technology greener: Achieving a balance between carbon and resource savings through ecodesign in hydropower systems pp. 11-17

John Gallagher, David Styles, Aonghus McNabola and A. Prysor Williams

Strategies for local authorities to achieve the EU 2020 50% recycling, reuse and composting target: A case study of England pp. 18-28

Steve Waite, Paul Cox and Terry Tudor

Designers’ attitude and behaviour towards construction waste minimization by design: A study in Shenzhen, China pp. 29-35

Jingru Li, Vivian W.Y. Tam, Jian Zuo and Jiaolan Zhu

Substance flow analysis of copper in production stage in the U.S. from 1974 to 2012 pp. 36-48

Minxi Wang, Wu Chen and Xin Li

Benchmarking construction waste management performance using big data pp. 49-58

Weisheng Lu, Xi Chen, Yi Peng and Liyin Shen

Life cycle greenhouse gas analysis of bioenergy generation alternatives using forest and wood residues in remote locations: A case study in British Columbia, Canada pp. 59-72

Claudia Cambero, Mariane Hans Alexandre and Taraneh Sowlati

A model for partnering with the informal e-waste industry: Rationale, principles and a case study pp. 73-83

John-Michael Davis and Yaakov Garb

Analysis of profitability of rainwater harvesting, gray water recycling and drain water heat recovery systems pp. 84-94

Agnieszka Stec and Sabina Kordana

Review and assessment of the adaptive capacity of the water sector in Cyprus against climate change impacts on water availability pp. 95-112

C. Papadaskalopoulou, E. Katsou, K. Valta, K. Moustakas, D. Malamis and M. Dodou

Life cycle assessment of ferronickel production in Greece pp. 113-122

Georgios Bartzas and Kostas Komnitsas

A Danish–Vietnamese partnership for business and technology development in solid waste management pp. 123-133

David Christensen and Leu Tho Bach

Compostable biopolymer use in the real world: Stakeholder interviews to better understand the motivations and realities of use and disposal in the US pp. 134-142

Diana Meeks, Troy Hottle, M.M. Bilec and A.E. Landis

Climatic and spatial variability of potential rainwater savings for a large coastal city pp. 143-147

Monzur Alam Imteaz, Upendra Paudel, Amimul Ahsan and Cristina Santos

Survey of the current status of sustainable concrete production in the U.S pp. 148-159

Ruoyu Jin, Qian Chen and Alfred Soboyejo

Embodied carbon of building products during their supply chains: Case study of aluminium window in Australia pp. 160-166

Seongwon Seo, Junbeum Kim, Kwok-Keung Yum and James McGregor

Waste minimisation through deconstruction: A BIM based Deconstructability Assessment Score (BIM-DAS) pp. 167-176

Olugbenga O. Akinade, Lukumon O. Oyedele, Muhammad Bilal, Saheed O. Ajayi, Hakeem A. Owolabi, Hafiz A. Alaka and Sururah A. Bello

E-waste flow among selected institutions of higher learning using material flow analysis model pp. 177-185

P. Agamuthu, Pearson Kasapo and Nurul Ain Mohd Nordin

Greenhouse gas emission factors for recycling of source-segregated waste materials pp. 186-197

David A. Turner, Ian D. Williams and Simon Kemp

Mitigating pollution of hazardous materials from WEEE of China: Portfolio selection for a sustainable future based on multi-criteria decision making pp. 198-210

Da An, Yu Yang, Xilong Chai, Beidou Xi, Lichun Dong and Jingzheng Ren

Volume 104, issue PB, 2015

Reprint of “Green decision-making model in reverse logistics using FUZZY-VIKOR method” pp. 334-347

Ali Haji Vahabzadeh, Arash Asiaei and Suhaiza Zailani

Risk and benefits brought by formal sustainability programs on fashion enterprises under market disruption pp. 348-353

Wing-Yan Li, Tsan-Ming Choi and Pui-Sze Chow

Multi-period closed-loop supply chain network equilibrium with carbon emission constraints pp. 354-365

Zhang Gui Tao, Zhong Yong Guang, Sun Hao, Hu Jin Song and Dai Geng Xin

Green supply chain management and firms’ performance: Understanding potential relationships and the role of green sourcing and some other green practices pp. 366-374

Ana Beatriz Lopes de Sousa Jabbour, Fernanda Cortegoso de Oliveira Frascareli and Charbel José Chiappetta Jabbour

Risk analysis in green supply chain using fuzzy AHP approach: A case study pp. 375-390

Sachin Kumar Mangla, Pradeep Kumar and Mukesh Kumar Barua

Stochastic reverse logistics network design for waste of electrical and electronic equipment pp. 391-404

Berk Ayvaz, Bersam Bolat and Nezir Aydın

Risk evaluation for recycled aggregate according to deleterious impurity content considering deconstruction scenarios and production methods pp. 405-416

Takafumi Noguchi, Won-Jun Park and Ryoma Kitagaki

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: A case study regarding GFRP pultrusion wastes pp. 417-426

M.C.S. Ribeiro, A.C. Meira-Castro, F.G. Silva, J. Santos, J.P. Meixedo, A. Fiúza, M.L. Dinis and M.R. Alvim

Volume 104, issue PA, 2015

A structure–efficiency based performance evaluation of the urban water cycle in northern China and its policy implications pp. 1-11

Junying Chu, Jianhua Wang and Can Wang

On the sustainability of cobalt utilization in China pp. 12-18

Xianlai Zeng and Jinhui Li

Geospatial and AHP-multicriteria analyses to locate and rank suitable sites for groundwater recharge with reclaimed water pp. 19-30

Khadija Gdoura, Makram Anane and Salah Jellali

Urban household solid waste generation and collection in Beijing, China pp. 31-37

Tingting Liu, Yufeng Wu, Xi Tian and Yu Gong

Environmental assessment of recycled mineral wool and polypropylene utilized in wood polymer composites pp. 38-48

Olli Väntsi and Timo Kärki

Solid waste pollution concern in economic value assessment: Is it uni-dimensional or multi-dimensional? pp. 49-60

Shehu Usman Adam, Mad Nasir Shamsudin, Shaufique F. Sidique, Khalid Abdul Rahim and Alias Radam

Reliability and economic analysis of urban rainwater harvesting in a megacity in Bangladesh pp. 61-67

Md. Rezaul Karim, Mohammad Zobair Ibne Bashar and Monzur Alam Imteaz

Resources saving and emissions reduction of the aluminum industry in China pp. 68-75

Qiang Yue, Heming Wang, Chengkang Gao, Tao Du, Liying Liu and Zhongwu Lu

Recycling of rare earths from fluorescent lamps: Value analysis of closing-the-loop under demand and supply uncertainties pp. 76-93

Erika Machacek, Jessika Luth Richter, Komal Habib and Polina Klossek

An examination of the product development process for fashion remanufacturing pp. 94-102

Geetha Dissanayake and Pammi Sinha

Effective approaches to reduce greenhouse gas emissions from waste to energy process: A China study pp. 103-108

Yuan Wang, Yuanyuan Yan, Guanyi Chen, Jian Zuo and Huibin Du

Decentralized options for faecal sludge management in urban slum areas of Sub-Saharan Africa: A review of technologies, practices and end-uses pp. 109-119

Swaib Semiyaga, Mackay A.E. Okure, Charles B. Niwagaba, Alex Y. Katukiza and Frank Kansiime

The role of geometric characterization in supporting structural steel reuse decisions pp. 120-130

Jamie Yeung, Scott Walbridge and Carl Haas

Optimal sizing of storage tanks in domestic rainwater harvesting systems: A linear programming approach pp. 131-140

Chiemeka Onyeka Okoye, Oğuz Solyalı and Bertuğ Akıntuğ

Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance pp. 141-151

Rebekah Yang, Seunggu Kang, Hasan Ozer and Imad L. Al-Qadi

Biogas digestate marketing: Qualitative insights into the supply side pp. 152-161

Johannes Dahlin, Carsten Herbes and Michael Nelles

Information sharing and curbside recycling: A pilot study to evaluate the value of door-to-door distribution of informational literature pp. 162-171

Kenneth W. Willman

Water recycling and reuse in soft drink/beverage industry: A case study for sustainable industrial water management in Turkey pp. 172-180

Emrah Alkaya and Göksel Niyazi Demirer

Involving integrated seawater desalination-power plants in the optimal design of water distribution networks pp. 181-193

Ramón González-Bravo, Fabricio Nápoles-Rivera, José María Ponce-Ortega and Mahmoud M. El-Halwagi

Evolution and present status of silicon carbide slurry recovery in silicon wire sawing pp. 194-205

H.S. Gopala Krishna Murthy

Industrial ecology-based strategies to reduce the embodied CO2 of magnesium metal pp. 206-212

Gui-Rok Kwon, Seung H. Woo and Seong-Rin Lim

Life cycle assessment of cotton textile products in Turkey pp. 213-223

G. Baydar, N. Ciliz and A. Mammadov

Comparative life cycle assessment of asphalt pavements using reclaimed asphalt, warm mix technology and cold in-place recycling pp. 224-238

Martina Irene Giani, Giovanni Dotelli, Nicolò Brandini and Luca Zampori

Waste-to-fuel opportunities for British quick service restaurants: A case study pp. 239-253

Anthony Velazquez Abad, Tom Cherrett and Peter Holdsworth

How social ties influence metal resource flows in the Bangladesh ship recycling industry pp. 254-264

S.M. Mizanur Rahman and Audrey L. Mayer

The energy balance of utilising meadow grass in Danish biogas production pp. 265-275

A.K.P. Meyer, C.S. Raju, S. Kucheryavskiy and J.B. Holm-Nielsen

Recycling indium from waste LCDs: A review pp. 276-290

Kaihua Zhang, Yufeng Wu, Wei Wang, Bin Li, Yinan Zhang and Tieyong Zuo

Public perception and acceptability toward reclaimed water in Tianjin pp. 291-299

Qianxin Gu, Yang Chen, Robert Pody, Rong Cheng, Xiang Zheng and Zhenxing Zhang

Potential metal requirement of active materials in lithium-ion battery cells of electric vehicles and its impact on reserves: Focus on Europe pp. 300-310

Bálint Simon, Saskia Ziemann and Marcel Weil

An industrial ecology approach to municipal solid waste management: I. Methodology pp. 311-316

R.L. Smith, D. Sengupta, S. Takkellapati and C.C. Lee

An industrial ecology approach to municipal solid waste management: II. Case studies for recovering energy from the organic fraction of MSW pp. 317-326

R.L. Smith, D. Sengupta, S. Takkellapati and C.C. Lee