Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 72, issue C, 2013

Historical evolution of anthropogenic aluminum stocks and flows in Italy pp. 1-8

Luca Ciacci, Weiqiang Chen, Fabrizio Passarini, Matthew Eckelman, Ivano Vassura and Luciano Morselli

Concrete block production from construction and demolition waste in Tanzania pp. 9-19

M.M. Sabai, M.G.D.M. Cox, R.R. Mato, E.L.C. Egmond and J.J.N. Lichtenberg

Effect of coal bottom ash as partial replacement of sand on properties of concrete pp. 20-32

Malkit Singh and Rafat Siddique

An automated solid waste bin level detection system using Gabor wavelet filters and multi-layer perception pp. 33-42

M.A. Hannan, Maher Arebey, R.A. Begum, A. Mustafa and Hassan Basri

The maturity tests during the composting of municipal solid wastes pp. 43-49

Olfa Fourti

Applying exergy analysis to rainwater harvesting systems to assess resource efficiency pp. 50-59

M. Violeta Vargas-Parra, Gara Villalba and Xavier Gabarrell

Analysis of the quality of the recovered paper from commingled collection systems pp. 60-66

Ruben Miranda, M. Concepcion Monte and Angeles Blanco

Establishment of an economic evaluation model for urban recycled water pp. 67-75

A. Listowski, H.H. Ngo and W.S. Guo

Life cycle climate impacts of the US concrete pavement network pp. 76-83

Alexander Loijos, Nicholas Santero and John Ochsendorf

Influence of a community-based waste management system on people's behavior and waste reduction pp. 84-90

T. Sekito, T.B. Prayogo, Y. Dote, T. Yoshitake and I. Bagus

Materials demand and environmental impact of buildings construction and demolition in China based on dynamic material flow analysis pp. 91-101

Tao Huang, Feng Shi, Hiroki Tanikawa, Jinling Fei and Ji Han

Grey water reclamation by decentralized MBR prototype pp. 102-107

Carme Santasmasas, Miquel Rovira, Frederic Clarens and César Valderrama

Collaboration between design and waste management: Can it help close the material loop? pp. 108-117

Isabel Ordoñez and Ulrike Rahe

Incidence of the level of deconstruction on material reuse, recycling and recovery from end-of life vehicles: an industrial-scale experimental study pp. 118-126

Alexis Schmid, Pascale Naquin and Rémy Gourdon

Recycling concepts and the index of recyclability for building materials pp. 127-135

Luiz H. Maccarini Vefago and Jaume Avellaneda

Volume 71, issue C, 2013

Analysis of different criteria to size rainwater storage tanks using detailed methods pp. 1-6

C. Santos and F. Taveira-Pinto

Long-term performance and operational strategies of a poultry slaughterhouse waste stabilization pond system in a tropical climate pp. 7-14

V. Del Nery, M.H.Z. Damianovic, E. Pozzi, I.R. de Nardi, V.E.A. Caldas and E.C. Pires

Modelling stormwater treatment systems using MUSIC: Accuracy pp. 15-21

Monzur Alam Imteaz, Amimul Ahsan, Ataur Rahman and Fatemeh Mekanik

Steel all over the world: Estimating in-use stocks of iron for 200 countries pp. 22-30

Stefan Pauliuk, Tao Wang and Daniel B. Müller

Substance flow analysis of cadmium in Korea pp. 31-39

Kyounghoon Cha, Minjung Son, Yasunari Matsuno, Vasilis Fthenakis and Tak Hur

Life cycle assessment of recycling PVC window frames pp. 40-47

Heinz Stichnothe and Adisa Azapagic

Estimating environmental release of mercury from medical-thermometers and potential “hot spot” development: Case study of need for improved waste management capacity in Cameroon pp. 48-52

Gilbert Kuepouo

Volume 70, issue C, 2013

Urban water resources planning by using a modified particle swarm optimization algorithm pp. 1-8

Mahdi Zarghami and Hassan Hajykazemian

Recycled wastes of tomato and hemp fibres for biodegradable pots: Physico-chemical characterization and field performance pp. 9-19

Evelia Schettini, Gabriella Santagata, Mario Malinconico, Barbara Immirzi, Giacomo Scarascia Mugnozza and Giuliano Vox

Public consultation on artificial aquifer recharge using treated municipal wastewater pp. 20-24

Anisha Nijhawan, Pawan Labhasetwar, Priyanka Jain and Manish Rahate

Management and recycling of waste glass in concrete products: Current situations in Hong Kong pp. 25-31

Tung-Chai Ling, Chi-Sun Poon and Hau-Wing Wong

Assessment and selection of best available technology (BAT) for wastewater facilities in the leather tanning and finishing industry pp. 32-37

Jinwook Chung, Junbeum Kim, Youngnoh Kim and Yongwoo Hwang

Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture pp. 38-43

Mohammad A.T. Alsheyab and Taisir S. Khedaywi

Life cycle analysis of silane recycling in amorphous silicon-based solar photovoltaic manufacturing pp. 44-49

M.A. Kreiger, D.R. Shonnard and Joshua Pearce

The application of information entropy in basin level water waste permits allocation in China pp. 50-54

Tao Sun, Hongwei Zhang and Yuan Wang

Public participation in designing a recycling scheme towards maximum public acceptance pp. 55-67

Kiriaki M. Keramitsoglou and Konstantinos Tsagarakis

Do the variable charges really increase the effectiveness and economy of waste management? A case study of the Czech Republic pp. 68-77

Jan Slavik and Jan Pavel

Industrial ecology and water utilization of the marine chemical industry: A case study of Hai Hua Group (HHG), China pp. 78-85

Changhao Liu and Kai Zhang

Volume 69, issue C, 2012

Life cycle greenhouse gas emissions of hemp–lime wall constructions in the UK pp. 1-9

Kenneth Ip and Andrew Miller

The problem of preparation the food packaging waste for recycling in Poland pp. 10-16

Andrzej Marcinkowski and Arkadiusz Michał Kowalski

Sustainability assessment of industrial waste treatment processes: The case of automotive shredder residue pp. 17-28

Isabel Vermeulen, Chantal Block, Jo Van Caneghem, Wim Dewulf, Subhas K. Sikdar and Carlo Vandecasteele

Use of iron and steel industry by-product (GGBS) in cement paste and mortar pp. 29-34

Rafat Siddique and Rachid Bennacer

Future recycling flows of tellurium from cadmium telluride photovoltaic waste pp. 35-49

Max Marwede and Armin Reller

Greenhouse gas impact of dual stream and single stream collection and separation of recyclables pp. 50-56

Garrett C. Fitzgerald, Jonathan S. Krones and Nickolas J. Themelis

An optimal water allocation model based on water resources security assessment and its application in Zhangjiakou Region, northern China pp. 57-65

Wang Xuan, Cui Quan and Li Shuyi

Multiobjective waste management optimization strategy coupling life cycle assessment and genetic algorithms: Application to PET bottles pp. 66-81

Claude-Emma Komly, Catherine Azzaro-Pantel, Antoine Hubert, Luc Pibouleau and Valérie Archambault

Pre-treatment of olive mill wastewaters at laboratory and mill scale and subsequent use in agriculture: Legislative framework and proposed soil quality indicators pp. 82-89

Kostas Komnitsas and Dimitra Zaharaki

An air-based automated material recycling system for postconsumer footwear products pp. 90-99

Michael James Lee and Shahin Rahimifard

Off-site sorting of construction waste: What can we learn from Hong Kong? pp. 100-108

Weisheng Lu and Hongping Yuan

Ashes from co-combustion of coal and biomass: New industrial wastes pp. 109-121

Jan Kalembkiewicz and Urszula Chmielarz

Understanding the regional context of sustainable concrete in Asia: Case studies in Thailand and Korea pp. 122-129

Michael Henry and Yoshitaka Kato

Financial feasibility and environmental analysis of potential rainwater harvesting systems: A case study in Spain pp. 130-140

Tito Morales, Rodrigo Lurueña, Joan Rieradevall, Carles M. Gasol and Xavier Gabarrell

Modeling packaging waste policy instruments and recycling in the MENA region pp. 141-152

Faten Loukil and Lamia Rouached

Volume 68, issue C, 2012

A method for identifying the worst recycling case: Application on a range of vehicles in the automotive sector pp. 1-13

Dominique Millet, Pierre-Alain Yvars and Pierre Tonnelier

Food losses in six Swedish retail stores: Wastage of fruit and vegetables in relation to quantities delivered pp. 14-20

Mattias Eriksson, Ingrid Strid and Per-Anders Hansson

Environmental and economic advantages associated with the use of RDF in cement kilns pp. 21-28

Mustafa Kara

Direct and indirect lead-containing waste discharge in the electrical and electronic supply chain pp. 29-35

Chia-ho Lee, Pi-cheng Chen and Hwong-wen Ma

Rainwater use in airports: A case study in Brazil pp. 36-43

Ronan Fernandes Moreira Neto, Isabella de Castro Carvalho, Maria Lúcia Calijuri and Aníbal da Fonseca Santiago

Electronic and electrical waste management in Sri Lanka: Suggestions for national policy enhancements pp. 44-53

Harshani Mallawarachchi and Gayani Karunasena

Material flow indicators and carbon footprint for MSW management systems: Analysis and application at regional level, Cantabria, Spain pp. 54-66

Eva Cifrian, Berta Galan, Ana Andres and Javier R. Viguri

Recycled airport pavements for achieving environmental sustainability: An Italian case study pp. 67-75

Filippo Giustozzi, Emanuele Toraldo and Maurizio Crispino

The effect of reservoir operational features on recycled wastewater quality pp. 76-87

Ofir Kfir, Alon Tal, Amit Gross and Eilon Adar

The flow of steel into the construction sector pp. 88-95

Muiris C. Moynihan and Julian M. Allwood

Construction waste minimisation comparing conventional and precast construction (Mixed System and IBS) methods in high-rise buildings: A Malaysia case study pp. 96-103

Suresh Kumar Lachimpadi, Joy Jacqueline Pereira, Mohd Raihan Taha and Mazlin Mokhtar

Using material/substance flow analysis to support sustainable development assessment: A literature review and outlook pp. 104-116

Chu-Long Huang, Jonathan Vause, Hwong-Wen Ma and Chang-Ping Yu

Buying back household waste electrical and electronic equipment: Assessing Thailand's proposed policy in light of past disposal behavior and future preferences pp. 117-125

Panate Manomaivibool and Sujitra Vassanadumrongdee

What are the clean reserves of fossil fuels? pp. 126-131

Alicia Valero and Antonio Valero