Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 51, issue 4, 2007

Stabilized soils for construction applications incorporating natural resources of Papua new Guinea pp. 711-731

K.M.A. Hossain, M. Lachemi and S. Easa

Systematic studies of shop and leisure voucher incentives for household recycling pp. 732-753

M.K. Harder and R. Woodard

Analysis of products from the pyrolysis and liquefaction of single plastics and waste plastic mixtures pp. 754-769

Paul T. Williams and Edward Slaney

Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case) pp. 770-791

Burak Felekoglu

A life cycle based multi-objective optimization model for the management of computer waste pp. 792-826

Poonam Khanijo Ahluwalia and Arvind K. Nema

Introduction of a waste incineration tax: Effects on the Swedish waste flows pp. 827-846

Jenny Sahlin, Tomas Ekvall, Mattias Bisaillon and Johan Sundberg

Modeling obsolete computer stock under regional data constraints: An Atlanta case study pp. 847-869

Nancey Green Leigh, Matthew J. Realff, Ning Ai, Steven P. French, Catherine L. Ross and Bert Bras

Modification of ecological footprint evaluation method to include non-renewable resource consumption using thermodynamic approach pp. 870-884

Hong X. Nguyen and Ryoichi Yamamoto

Volume 51, issue 3, 2007

Eco-efficiency in primary metals production: Context, perspectives and methods pp. 511-540

Rene van Berkel

Combining economic and environmental dimensions: Value chain analysis of UK aluminium flows pp. 541-560

Kristina Dahlström and Paul Ekins

On the effect of annual evolution of rejected and non-rejected rates in the screening process of packaging wastes on meeting target recycling rates pp. 561-576

Alexandre Magrinho and Viriato Semiao

Effects of wastewater recycling from natural rubber smoked sheet production on economic crops in southern Thailand pp. 577-590

S. Chaiprapat and S. Sdoodee

Laboratory investigations on co-digestion of energy crops and crop residues with cow manure for methane production: Effect of crop to manure ratio pp. 591-609

A. Lehtomäki, S. Huttunen and J.A. Rintala

Investigation of temperature characteristics of recycled hot mix asphalt mixtures pp. 610-620

Shaopeng Wu, Jian Qiu, Liantong Mo, Jianying Yu, Yongmei Zhang and Bo Li

Evaluation of shredder residue as cement manufacturing feedstock pp. 621-642

Bob Boughton

A critical evaluation of partnerships in municipal waste management in England pp. 643-664

R. Slater, J. Frederickson, C. Thomas, D. Wield and S. Potter

Combined distiller waste utilisation and combustion gases desulphurisation method pp. 665-690

Tomasz Kasikowski, Roman Buczkowski, Marcin Cichosz and Eliza Lemanowska

Separation and recovery of materials from scrap printed circuit boards pp. 691-709

William J. Hall and Paul T. Williams

Volume 51, issue 2, 2007

Waste-resource flows of short-lived goods in households of Santiago de Cuba pp. 265-283

Claudia R. Binder and Hans-Joachim Mosler

Sustainable urban sewerage system and its application in China pp. 284-293

Jie Zhang, Xiang-Sheng Cao and Xue-Zheng Meng

Environmental impact assessment of different design schemes of an industrial ecosystem pp. 294-313

Aditi Singh, Helen H. Lou, Carl L. Yaws, Jack R. Hopper and Ralph W. Pike

The Swedish producer responsibility for paper packaging: An effective waste management policy? pp. 314-344

Olle Hage

Joint forest management in India: An attitudinal analysis of stakeholders pp. 345-354

Parul Rishi

Exploiting potential use of partially deteriorated cement in concrete mixtures pp. 355-366

M.C. Nataraja, T.S. Nagaraj, Lelin Das and N. Richard Sandeep

Strategies for maintaining light metal reuse: Insights from modeling of firm-wide raw materials availability and demand pp. 367-396

Randolph Kirchain and Alexander Cosquer

Exergy analysis applied to biodiesel production pp. 397-407

Laura Talens, Gara Villalba and Xavier Gabarrell

A novel composting process for plant wastes in Taiwan military barracks pp. 408-417

Hua-Shan Tai and Wei-Hsiung He

Analyzing policy impact potential for municipal solid waste management decision-making: A case study of Taiwan pp. 418-434

Jun-Pin Su, Pei-Te Chiueh, Ming-Lung Hung and Hwong-Wen Ma

3D-mapping optimization of embodied energy of transportation pp. 435-453

Joshua Pearce, Sara J. Johnson and Gabriel B. Grant

Comparative analysis of phosphorus use within national and local economies in China pp. 454-474

Yi Liu, Jining Chen, Arthur P.J. Mol and Robert U. Ayres

Recycle of low chemical potential substance pp. 475-486

C.F. Wen, Y.L. Zhao and R.Z. Liang

Assessment of water resources allocation options: Conjunctive use planning in a link canal command pp. 487-506

Deepak Khare, M.K. Jat and J. Deva Sunder

Volume 51, issue 1, 2007

Linking intended behaviour and actions: A case study of healthcare waste management in the Cornwall NHS pp. 1-23

T.L. Tudor, S.W. Barr and A.W. Gilg

Regional ecological security assessment based on long periods of ecological footprint analysis pp. 24-41

Qing Huang, Ranghui Wang, Zhiyuan Ren, Jing Li and Huizhi Zhang

Combining ecological and economic assessment of options for newspaper waste management pp. 42-63

Helena Dahlbo, Markku Ollikainen, Sanna Peltola, Tuuli Myllymaa and Matti Melanen

Water conservation through implementation of ultrafiltration and reverse osmosis system with recourse to recycling of effluent in textile industry–A case study pp. 64-77

Tapas Nandy, Pravin Manekar, Rita Dhodapkar, Girish Pophali and Sukumar Devotta

Management of household bulky waste in England pp. 78-92

Anthony Curran, Ian D. Williams and Sonia Heaven

Water conservation and effluent minimization: Case study of a poultry slaughterhouse pp. 93-100

A.K.B. Amorim, I.R. de Nardi and V. Del Nery

Time-dependent material flow analysis of iron and steel in the UK pp. 101-117

R. Geyer, J. Davis, J. Ley, J. He, R. Clift, A. Kwan, M. Sansom and T. Jackson

Time-dependent material flow analysis of iron and steel in the UK pp. 118-140

J. Davis, R. Geyer, J. Ley, J. He, R. Clift, A. Kwan, M. Sansom and T. Jackson

Measuring spatial repercussion effects of regional waste management pp. 141-174

Shigemi Kagawa, Shinichiro Nakamura, Hajime Inamura and Masato Yamada

The impact of a storage facility on optimality conditions of wastewater reuse in land application: A case study in Lebanon pp. 175-189

M.R. Darwish, M. Sharara, M. Sidahmed and M. Haidar

Implementation of waste management and minimisation in the construction industry of Malaysia pp. 190-202

Rawshan Ara Begum, Chamhuri Siwar, Joy Jacqueline Pereira and Abdul Hamid Jaafar

Recovery of exhaust magnesium sands: Reclamation plant design and cost analysis pp. 203-219

B. Ruffino and M.C. Zanetti

Closed-loop wool carpet recycling pp. 220-224

Steven J. McNeil, Matthew R. Sunderland and Larissa I. Zaitseva

Methodology for determination of anaerobic digestion kinetics using a bench top digester pp. 225-236

Marko Tramšek, Andreja Goršek and Peter Glavič

Domestic sewage treatment in a pilot-scale anaerobic sequencing batch biofilm reactor (ASBBR) pp. 237-247

Arnaldo Sarti, Marcelo Loureiro Garcia, Marcelo Zaiat and Eugenio Foresti

European household waste management schemes: Their effectiveness and applicability in England pp. 248-263

I.G. Husaini, A. Garg, K.H. Kim, J. Marchant, S.J.T. Pollard and R. Smith

Volume 50, issue 4, 2007

Environmental impact and risk assessment of mineral wastes reuse strategies: Review and critical analysis of approaches and applications pp. 351-379

Ligia Tiruta-Barna, Enrico Benetto and Yves Perrodin

Present status of the recycling of waste electrical and electronic equipment in Korea pp. 380-397

Jae-chun Lee, Hyo Teak Song and Jae-Min Yoo

An economic modelling approach to the design and delivery of sustainable waste minimisation clubs: Prospects in the new policy framework pp. 398-414

Thomas Coskeran, Steve Smith and Paul Phillips

Manufacture of strand board made from construction scrap wood pp. 415-426

Andi Hermawan, Takeshi Ohuchi, Ryo Tashima and Yasuhide Murase

Environmental training and cleaner production in Indian industry—A micro-level study pp. 427-441

Seema Unnikrishnan and D.S. Hegde

A process model to estimate the cost of industrial scale biodiesel production from waste cooking oil by supercritical transesterification pp. 442-458

J.M.N. van Kasteren and A.P. Nisworo

Rainwater conservation and recycling by optimal size on-farm reservoir pp. 459-474

Balram Panigrahi, Sudhindra N Panda and Bimal Chandra Mal

Municipal solid waste production and composition in Finland—Changes in the period 1960–2002 and prospects until 2020 pp. 475-488

Laura Sokka, Riina Antikainen and Pekka E. Kauppi

Volume 50, issue 3, 2007

Feasibility of producing bio-ethanol from waste residues: A Canadian perspective pp. 211-230

Pascale Champagne

Prospect and current status of recycling waste plastics and technology for converting them into oil in China pp. 231-239

Guang-Hua Zhang, Jun-Feng Zhu and A. Okuwaki

Quantification of methane emission from municipal solid waste disposal in Delhi pp. 240-259

Vikash Talyan, R.P. Dahiya, S. Anand and T.R. Sreekrishnan

Applying distance-to-target weighing methodology to evaluate the environmental performance of bio-based energy, fuels, and materials pp. 260-281

Martin Weiss, Martin Patel, Hermann Heilmeier and Stefan Bringezu

Public perspective towards wastewater reuse in a medium size, seaside, Mediterranean city: A pilot survey pp. 282-292

Nektarios Kantanoleon, Leonidas Zampetakis and Thrassyvoulos Manios

The use of recycled aggregate in concrete in Hong Kong pp. 293-305

Chi-Sun Poon and Dixon Chan

Recycling of wastewaters of textile dyeing industries using advanced treatment technology and cost analysis—Case studies pp. 306-318

K. Ranganathan, K. Karunagaran and D.C. Sharma

Towards the development of a standardised measurement unit for healthcare waste generation pp. 319-333

Terry L. Tudor

The contribution of environmental management systems to the management of construction and demolition waste: The case of the Autonomous Community of Madrid (Spain) pp. 334-349

Gracia Rodríguez, Francisco Javier Alegre and Germán Martínez

Volume 50, issue 2, 2007

On the sustainability of an integrated model system with industrial, ecological, and macroeconomic components pp. 122-129

H. Cabezas, H.W. Whitmore, C.W. Pawlowski and A.L. Mayer

SPIonExcel—Fast and easy calculation of the Sustainable Process Index via computer pp. 130-142

Daniel Sandholzer and Michael Narodoslawsky

The conceptual design approach—A process integration approach on the move pp. 143-157

Toshko Zhelev

An efficient heuristic procedure for the optimal design of wastewater treatment systems pp. 158-185

Pedro M. Castro, Henrique A. Matos and Augusto Q. Novais

Cost-based design of wastewater network optimal topology pp. 186-201

Vasile Lavric, Petrica Iancu and Valentin Pleşu

The application of the Taguchi method in the evaluation of mechanical flotation in waste activated sludge thickening pp. 202-210

Barend J. du Plessis and G.H. de Villiers

Volume 50, issue 1, 2007

Ethanol as an alternative fuel from agricultural, industrial and urban residues pp. 1-39

S. Prasad, Anoop Singh and H.C. Joshi

An overview of utilization of slag and sludge from steel industries pp. 40-57

B. Das, S. Prakash, P.S.R. Reddy and V.N. Misra

“Bottom–up” study of in-use nickel stocks in New Haven, CT pp. 58-70

Katherine Rostkowski, Jason Rauch, Konstantine Drakonakis, Barbara Reck, R.B. Gordon and T.E. Graedel

Use of aggregates from recycled construction and demolition waste in concrete pp. 71-81

Akash Rao, Kumar N. Jha and Sudhir Misra

Removal of cement mortar remains from recycled aggregate using pre-soaking approaches pp. 82-101

Vivian W.Y. Tam, C.M. Tam and K.N. Le

Long-term operating performance of a poultry slaughterhouse wastewater treatment plant pp. 102-114

V. Del Nery, I.R. de Nardi, M.H.R.Z. Damianovic, E. Pozzi, A.K.B. Amorim and M. Zaiat