Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 111, issue C, 2016

Recovering value from used medical instruments: A case study of laryngoscopes in England and Italy pp. 1-9

Costanza Viani, Mentore Vaccari and Terry Tudor

China’s agricultural nitrogen flows in 2011: Environmental assessment and management scenarios pp. 10-27

Minpeng Chen, Fu Sun and Junko Shindo

Environmental performance of sorghum, barley and oat silage production for livestock feed using life cycle assessment pp. 28-41

Sara González-García, Francesc Baucells, Gumersindo Feijoo and Maria Teresa Moreira

Supply chain social sustainability for developing nations: Evidence from India pp. 42-52

Venkatesh Mani, Angappa Gunasekaran, Thanos Papadopoulos, Benjamin Hazen and Rameshwar Dubey

Explaining and promoting household food waste-prevention by an environmental psychological based intervention study pp. 53-66

Karolin Schmidt

Analysis of copper flows in the United States: 1975–2012 pp. 67-76

Wu Chen, Minxi Wang and Xin Li

Volume 110, issue C, 2016

Ranking sewage sludge management strategies by means of Decision Support Systems: A case study pp. 1-15

Giorgio Bertanza, Pietro Baroni and Matteo Canato

Potential demand for recoverable resources from Indonesian wastewater and solid waste pp. 16-29

S.M. Kerstens, A. Priyanka, K.C. van Dijk, F.J. De Ruijter, I. Leusbrock and G. Zeeman

Resourceful recycling process of waste desktop computers: A review study pp. 30-47

Khandakar Md Habib Al Razi

Scrapping steel components for recycling—Isn’t that good enough? Seeking improvements in automotive component end-of-life pp. 48-60

Derek L. Diener and Anne-Marie Tillman

A model for improving sustainable green waste recovery pp. 61-73

Dirk Inghels, Wout Dullaert and Jacqueline Bloemhof-Ruwaard

How to integrate the informal recycling system into municipal solid waste management in developing countries: Based on a China’s case in Suzhou urban area pp. 74-86

Fan Fei, Lili Qu, Zongguo Wen, Yanyan Xue and Huanan Zhang

Evaluating urban sustainability potential based on material flow analysis of inputs and outputs: A case study in Jinchang City, China pp. 87-98

Ying Li, R.J.S. Beeton, Anthony Halog and Thomas Sigler

Evolution of palm oil mills into bio-refineries: Literature review on current and potential uses of residual biomass and effluents pp. 99-114

Jesus Alberto Garcia-Nunez, Nidia Elizabeth Ramirez-Contreras, Deisy Tatiana Rodriguez, Electo Silva-Lora, Craig Stuart Frear, Claudio Stockle and Manuel Garcia-Perez

Volume 109, issue C, 2016

Forecast of steel demand and the availability of depreciated steel scrap in China pp. 1-12

Yanni Xuan and Qiang Yue

Quantifying environmental externalities with a view to internalizing them in the price of products, using different monetization models pp. 13-23

Thu Lan Thi Nguyen, Bertrand Laratte, Bertrand Guillaume and Anthony Hua

How do people's perceptions of water quality influence the life cycle environmental impacts of drinking water in Uganda? pp. 24-33

Christine Prouty and Qiong Zhang

Mobile phone waste management in developing countries: A case of Sri Lanka pp. 34-43

Vyshnavi Thavalingam and Gayani Karunasena

Environmental impact of beef production in Mexico through life cycle assessment pp. 44-53

Adriana Rivera Huerta, Leonor Patricia Güereca and María de la Salud Rubio Lozano

A multi-method approach for analysing the potential employment impacts of material efficiency pp. 54-66

Simone Cooper, Alexandra C.H. Skelton, Anne Owen, Danielle Densley-Tingley and Julian M. Allwood

Comparative environmental evaluation of aggregate production from recycled waste materials and virgin sources by LCA pp. 67-77

Md. Uzzal Hossain, Chi Sun Poon, Irene M.C. Lo and Jack C.P. Cheng

Evaluating extended land consumption in building life cycle to improve land conservation: A case study in Shenyang, China pp. 78-89

Xu Tang, Chunyan Li, Shiyuan Hu, Yaolin Liu and Hong Geng

Cost–benefit analysis of GHG emission reduction in waste to energy projects of China under clean development mechanism pp. 90-95

Yuan Wang, Shengnan Geng, Peng Zhao, Huibin Du, Yu He and John Crittenden

Environmental message framing: Enhancing consumer recycling of mobile phones pp. 96-101

John Baxter and Irmelin Gram-Hanssen

Optimal allocation of regional water resources: From a perspective of equity–efficiency tradeoff pp. 102-113

Zhineng Hu, Yazhen Chen, Liming Yao, Changting Wei and Chaozhi Li

Business outcomes of product repairability: A survey-based study of consumer repair experiences pp. 114-122

Mostafa Sabbaghi, Behzad Esmaeilian, Willie Cade, Kyle Wiens and Sara Behdad

A multi-objective model for selecting design alternatives and end-of-life options under uncertainty: A sustainable approach pp. 123-136

Mariam Ameli, Saeed Mansour and Amir Ahmadi-Javid

Attitudes to the recovery and recycling of agricultural plastics waste: A case study of Nova Scotia, Canada pp. 137-145

Isaac Muise, Michelle Adams, Ray Côté and G.W. Price

Edible food waste from Norwegian households—Detailed food waste composition analysis among households in two different regions in Norway pp. 146-154

Ole Jørgen Hanssen, Frode Syversen and Eivind Stø

Food waste prevention in Europe – A cause-driven approach to identify the most relevant leverage points for action pp. 155-165

Carmen Priefer, Juliane Jörissen and Klaus-Rainer Bräutigam

The effect of data structure and model choices on MFA results: A comparison of phosphorus balances for Denmark and Austria pp. 166-175

Manfred Klinglmair, Ottavia Zoboli, David Laner, Helmut Rechberger, Thomas Fruergaard Astrup and Charlotte Scheutz

What keeps Chinese from recycling: Accessibility of recycling facilities and the behavior pp. 176-186

Suopeng Zhang, Mingli Zhang, Xueying Yu and Hao Ren

Financial assessment of manufacturing recycled aggregate concrete in ready-mix concrete plants pp. 187-201

Mayuri Wijayasundara, Priyan Mendis, Lihai Zhang and Massoud Sofi

Volume 108, issue C, 2016

Out of sight, out of mind: Issues and obstacles to recycling in Ontario's multi residential buildings pp. 1-9

Calvin Lakhan

Oil refining spent catalysts: A review of possible recycling technologies pp. 10-20

Francesco Ferella, Valentina Innocenzi and Fabio Maggiore

Sustainable urban water resources management considering life-cycle environmental impacts of water utilization under uncertainty pp. 21-40

Yanpeng Cai, Wencong Yue, Linyu Xu, Zhifeng Yang and Qiangqiang Rong

Outsourcing decisions in reverse logistics: Sustainable balanced scorecard and graph theoretic approach pp. 41-53

Saurabh Agrawal, Rajesh K. Singh and Qasim Murtaza

How can we adapt to geological scarcity of antimony? Investigation of antimony's substitutability and of other measures to achieve a sustainable use pp. 54-62

M.L.C.M. Henckens, P.P.J. Driessen and E. Worrell

An analysis of integrated robust hybrid model for third-party reverse logistics partner selection under fuzzy environment pp. 63-81

Chandra Prakash and M.K. Barua

RETRACTED: A carbon-sensitive two-echelon-inventory supply chain model with stochastic demand pp. 82-87

Malek Abu Alhaj, Davor Svetinovic and Ali Diabat

Determining economically optimal household organic material management pathways pp. 88-96

Cam Hebda, Gabrielle Gaustad, Anahita Williamson and Thomas Trabold

Harvesting rooftop runoff to flush toilets: Drawing conclusions from four major U.S. cities pp. 97-106

Nathan Rostad, Romano Foti and Franco A. Montalto

Pulp and paper mill sludge management practices: What are the challenges to assess the impacts on greenhouse gas emissions? pp. 107-133

Patrick Faubert, Simon Barnabé, Sylvie Bouchard, Richard Côté and Claude Villeneuve

Differences of methods to estimate generation of waste electrical and electronic equipment for developing countries: Jordan as a case study pp. 134-139

Mahdi Ikhlayel

Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods pp. 140-155

Lorenzo Berzi, Massimo Delogu, Marco Pierini and Filippo Romoli

China's low-carbon industrial transformation assessment based on Logarithmic Mean Divisia Index model pp. 156-170

Gengyuan Liu, Yan Hao, Yun Zhou, Zhifeng Yang, Yan Zhang and Meirong Su

Life cycle energy and material flow implications of gypsum plasterboard recycling in the European Union pp. 171-181

Ana Jiménez Rivero, Roger Sathre and Justo García Navarro

Identification and analysis of reverse logistics barriers using fuzzy Delphi method and AHP pp. 182-197

Marina Bouzon, Kannan Govindan, Carlos M.Taboada Rodriguez and Lucila M.S. Campos

Volume 107, issue C, 2016

Quantitative assessment of material composition of end-of-life ships using onboard documentation pp. 1-9

K.P. Jain, J.F.J. Pruyn and J.J. Hopman

The rise and fall of a “waste city” in the construction of an “urban circular economic system”: The changing landscape of waste in Beijing pp. 10-17

Xin Tong and Dongyan Tao

The stability and profitability of the informal WEEE collector in developing countries: A case study of China pp. 18-26

Yifan Gu, Yufeng Wu, Ming Xu, Huaidong Wang and Tieyong Zuo

Environmental analysis of different packaging waste collection systems for Istanbul – Turkey case study pp. 27-37

Eren Yıldız-Geyhan, Gülşah Yılan-Çiftçi, Gökçen Alev Altun-Çiftçioğlu and Mehmet Arif Neşet Kadırgan

Constructing joint production chains: An enterprise input-output approach for alternative energy use pp. 38-52

Devrim Murat Yazan

Resource savings by urban mining: The case of desktop and laptop computers in Belgium pp. 53-64

Emile Van Eygen, Steven De Meester, Ha Phuong Tran and Jo Dewulf

Municipal Solid Waste Management services and its funding in Spain pp. 65-72

Julián Chamizo-Gonzalez, Elisa Isabel Cano-Montero and Clara Isabel Muñoz-Colomina

Food waste reduction in supermarkets – Net costs and benefits of reduced storage temperature pp. 73-81

Mattias Eriksson, Ingrid Strid and Per-Anders Hansson

Economic and environmental perspectives of end-of-life ship management pp. 82-91

Jun-Ki Choi, Daniel Kelley, Sean Murphy and Dillip Thangamani

The role of geospatial industrial diversity in the facilitation of regional industrial symbiosis pp. 92-103

Paul D. Jensen

An integrated life cycle costing and human health impact analysis of municipal solid waste management options in Hong Kong using modified eco-efficiency indicator pp. 104-114

Kok Sin Woon and Irene M.C. Lo

Towards improved understanding of reverse logistics – Examining mediating role of return intention pp. 115-128

Saumya Dixit and Anant Jyoti Badgaiyan

Environmental assessment of aqueous alkaline absorption of carbon dioxide and its use to produce a construction material pp. 129-141

J.L. Galvez-Martos, J. Morrison, G. Jauffret, E. Elsarrag, Y. AlHorr, M.S. Imbabi and F.P. Glasser

Phosphorus recovery as struvite: Recent concerns for use of seed, alternative Mg source, nitrogen conservation and fertilizer potential pp. 142-156

Sampriti Kataki, Helen West, Michèle Clarke and D.C. Baruah

Potential uses and value-added products derived from waste polystyrene in developing countries: A review pp. 157-165

Nhamo Chaukura, Willis Gwenzi, Tavengwa Bunhu, Deborah T. Ruziwa and Innocent Pumure

Public perceptions and economic values of source-separated collection of rural solid waste: A pilot study in China pp. 166-173

Chao Zeng, Dongjie Niu, Hangfen Li, Tao Zhou and Youcai Zhao

The influence of UK emissions reduction targets on the emissions of the global steel industry pp. 174-184

André Cabrera Serrenho, Zenaida Sobral Mourão, Jonathan Norman, Jonathan M. Cullen and Julian M. Allwood

Investigation of the influential strength of factors on adoption of green supply chain management practices: An Indian mining scenario pp. 185-194

K. Govindan, K. Muduli, K. Devika and A. Barve

Added-value from linking the value chains of wastewater treatment, crop production and bioenergy production: A case study on reusing wastewater and sludge in crop production in Braunschweig (Germany) pp. 195-211

Oliver Maaß and Philipp Grundmann

Removing nitrogen from wastewater with side stream anammox: What are the trade-offs between environmental impacts? pp. 212-219

Mara Hauck, Francisca A. Maalcke-Luesken, Mike S.M. Jetten and Mark A.J. Huijbregts

Causal relationships of energy consumption, price, and CO2 emissions in the U.S. building sector pp. 220-226

Seungtaek Lee and Wai Oswald Chong