Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 53, issue 12, 2009

Petrochemicals from oil, natural gas, coal and biomass: Production costs in 2030–2050 pp. 653-663

Tao Ren, Bert Daniëls, Martin K. Patel and Kornelis Blok

Price and volatility transmission between primary and scrap metal markets pp. 664-673

Irene M. Xiarchos and Jerald J. Fletcher

Application of recycled paper sludge and biomass materials in manufacture of green composite pallet pp. 674-679

Sumin Kim, Hyun-Joong Kim and Jin Chul Park

Copper cycle in China and its entropy analysis pp. 680-687

Q. Yue, Z.W. Lu and S.K. Zhi

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA pp. 688-697

Gjergj Dodbiba, Teiji Nukaya, Yousuke Kamioka, Yuji Tanimura and Toyohisa Fujita

Country-scale phosphorus balancing as a base for resources conservation pp. 698-709

Demet Seyhan

Volume 53, issue 11, 2009

Cost efficiency in the management of solid urban waste pp. 601-611

Alessandro Lombrano

Garnering input for recycling communication strategies at a Big Ten University pp. 612-623

Michael D. Kaplowitz, Felix K. Yeboah, Laurie Thorp and Aimee M. Wilson

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential pp. 624-630

Heinz Stichnothe and Adisa Azapagic

Methodology of industry scale analysis under the constraint of regional resource capacity using HSY algorithm pp. 631-638

Hongpin Mo, Zongguo Wen and Jining Chen

Towards greening a university campus: The case of the University of Maribor, Slovenia pp. 639-644

Rebeka Lukman, Abhishek Tiwary and Adisa Azapagic

Strength and workability of masonry mortars manufactured with ladle furnace slag pp. 645-651

Ángel Rodriguez, Juan M. Manso, Ángel Aragón and Javier J. Gonzalez

Volume 53, issue 10, 2009

The impacts of climate zones on the energy performance of existing Thai buildings pp. 545-551

Amporn Kunchornrat, Pichai Namprakai and Peter T. du Pont

Recycling of slag to act as a flux in submerged arc welding pp. 552-558

Kulwant Singh and Sunil Pandey

Designing sustainable recovery network of end-of-life products using genetic algorithm pp. 559-570

Farzad Dehghanian and Saeed Mansour

Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash pp. 571-581

B. González-Corrochano, J. Alonso-Azcárate and M. Rodas

An empirical assessment of ecological footprint calculations for Malaysia pp. 582-587

Rawshan Ara Begum, Joy Jacqueline Pereira, Abdul Hamid Jaafar and Abul Quasem Al-Amin

A generic graphical approach for simultaneous targeting and design of a gas network pp. 588-591

Sharifah Rafidah Wan Alwi, Arfahsaadah Aripin and Zainuddin Abdul Manan

Expert-based scenarios for strategic waste and resource management planning—C&D waste recycling in the Canton of Zurich, Switzerland pp. 592-600

Andy Spoerri, Daniel J. Lang, Claudia R. Binder and Roland W. Scholz

Volume 53, issue 9, 2009

Substance flow analysis of phosphorus and manganese correlated with South Korean steel industry pp. 479-489

Yong-Soo Jeong, Kazuyo Matsubae-Yokoyama, Hironari Kubo, Jong-Jin Pak and Tetsuya Nagasaka

Parametric sensitivity in transesterification of waste cooking oil for biodiesel production—A review pp. 490-497

A. Banerjee and R. Chakraborty

The impact of transient populations on recycling behaviour in a densely populated urban environment pp. 498-506

R.E. Timlett and I.D. Williams

Evaluating the quality of bioaerosol risk assessments for composting facilities in England and Wales pp. 507-512

G.H. Drew, G.M. Jordinson, M.A. Smith and S.J.T. Pollard

Basic petrochemicals from natural gas, coal and biomass: Energy use and CO2 emissions pp. 513-528

Tao Ren and Martin K. Patel

Utilization of MSW compost for organic matter conservation in agricultural soils of NW Spain pp. 529-534

María Teresa Barral, Remigio Paradelo, Ana Belén Moldes, Marta Domínguez and Francisco Díaz-Fierros

Case study: Determination of the economic and operational feasibility of a material recovery facility for municipal recycling in Lucas County, Ohio, USA pp. 535-543

Matthew J. Franchetti

Volume 53, issue 8, 2009

Regional rainfall level zoning for rainwater harvesting systems in northern Taiwan pp. 421-428

C.L. Cheng and M.C. Liao

Effects of social marketing on battery collection pp. 429-433

Mitesh Kataria and Karin Larsén

Energy- and greenhouse gas-based LCA of biofuel and bioenergy systems: Key issues, ranges and recommendations pp. 434-447

Francesco Cherubini, Neil D. Bird, Annette Cowie, Gerfried Jungmeier, Bernhard Schlamadinger and Susanne Woess-Gallasch

Removal force models for component disassembly from waste printed circuit board pp. 448-454

Jiping Yang, Dong Xiang, Jinsong Wang, Guanghong Duan and Hong-chao Zhang

The economics of secondary aluminium supply: An econometric analysis based on European data pp. 455-463

Jerry Blomberg and Patrik Söderholm

A novel flowsheet for the recovery of metal values from waste printed circuit boards pp. 464-469

A. Das, A. Vidyadhar and S.P. Mehrotra

Development and assessment of strategies to ensure economic sustainability of the U.S. automotive recovery infrastructure pp. 470-477

Vishesh Kumar and John W. Sutherland

Volume 53, issue 7, 2009

Development of large scale reuses of inorganic by-products in Australia: The case study of Kwinana, Western Australia pp. 365-378

D. van Beers, A. Bossilkov and C. Lund

Metal concentrations and metal mobility in unsaturated mine wastes in mining areas of Goa, India pp. 379-385

Mohan Yellishetty, P.G. Ranjith and D. Lalit Kumar

Maturation of primary stabilized compost from rotary drum composter pp. 386-392

Yatish Kumar Singh, Ajay S. Kalamdhad, Muntjeer Ali and A.A. Kazmi

A probabilistic approach to rainwater harvesting systems design and evaluation pp. 393-399

Ming-Daw Su, Chun-Hung Lin, Ling-Fang Chang, Jui-Lin Kang and Mei-Chun Lin

A universal code for environmental management of products pp. 400-408

Valerie M. Thomas

China's recyclable resources recycling system and policy: A case study in Suzhou pp. 409-419

Hongpin Mo, Zongguo Wen and Jining Chen

Volume 53, issue 6, 2009

Metal resource potential of residues from municipal solid waste (MSW) melting plants pp. 301-308

Chang-Hwan Jung and Masahiro Osako

Inventory of pollution reduction options for an aluminium pressure die casting plant pp. 309-320

Belmira Neto, Carolien Kroeze, Leen Hordijk and Carlos Costa

Attitude and behavioral factors in waste management in the construction industry of Malaysia pp. 321-328

Rawshan Ara Begum, Chamhuri Siwar, Joy Jacqueline Pereira and Abdul Hamid Jaafar

A methodological framework for end-of-life management of electronic products pp. 329-339

E. Iakovou, N. Moussiopoulos, A. Xanthopoulos, Ch. Achillas, N. Michailidis, M. Chatzipanagioti, C. Koroneos, K.-D. Bouzakis and V. Kikis

Life cycle assessment of the use of compost from municipal organic waste for fertilization of tomato crops pp. 340-351

Julia Martínez-Blanco, Pere Muñoz, Assumpció Antón and Joan Rieradevall

SRCCP: A stochastic robust chance-constrained programming model for municipal solid waste management under uncertainty pp. 352-363

Yilong Xu, G.H. Huang, X.S. Qin and M.F. Cao

Volume 53, issue 5, 2009

Paper recycling patterns and potential interventions in the education sector: A case study of paper streams at Rhodes University, South Africa pp. 237-242

N. Amutenya, C.M. Shackleton and K. Whittington-Jones

Analysis of regional material flows: The case of the Czech Republic pp. 243-254

Jan Kovanda, Jan Weinzettel and Tomas Hak

Introducing a new model for material savings in the Finnish paper industry pp. 255-261

Martin Lodenius, Erja Heino and Sanna Viljakainen

Water supply in regional Victoria Australia: A review of the water cartage industry and willingness to pay for recycled water pp. 262-268

Anna C. Hurlimann

Waste minimisation at a Welsh university: A viability study using choice modelling pp. 269-275

B.K. Harris and E.J. Probert

Carbon implications of end-of-life management of building materials pp. 276-286

Ambrose Dodoo, Leif Gustavsson and Roger Sathre

Greywater reuse in residential schools in Madhya Pradesh, India—A case study of cost–benefit analysis pp. 287-293

Sam Godfrey, Pawan Labhasetwar and Satish Wate

Used lubricating oil management options based on life cycle thinking pp. 294-299

Vorapot Kanokkantapong, Worapon Kiatkittipong, Bunyarit Panyapinyopol, Porntip Wongsuchoto and Prasert Pavasant

Volume 53, issue 4, 2009

Perspectives in reverse logistics: A review pp. 175-182

Shaligram Pokharel and Akshay Mutha

Environmental concern and its implication to household waste separation and disposal: Evidence from Mekelle, Ethiopia pp. 183-191

Tewodros Tadesse

The impacts of watershed management on land use and land cover dynamics in Eastern Tigray (Ethiopia) pp. 192-198

Fikir Alemayehu, Nurhussen Taha, Jan Nyssen, Atkilt Girma, Amanuel Zenebe, Mintesinot Behailu, Seppe Deckers and Jean Poesen

Economic analysis of deposit–refund systems with measures for mitigating negative impacts on suppliers pp. 199-207

Daisuke Numata

Material stocks and flows accounting for copper and copper-based alloys in Japan pp. 208-217

Ichiro Daigo, Susumu Hashimoto, Yasunari Matsuno and Yoshihiro Adachi

Characteristics of effective battery recycling slogans: A Swiss field study pp. 218-230

Ralf Hansmann, Peter Loukopoulos and Roland W. Scholz

Quantification of the impact of the end-of-life scenario on the overall resource consumption for a dwelling house pp. 231-236

J. Dewulf, G. Van der Vorst, N. Versele, A. Janssens and H. Van Langenhove

Volume 53, issue 3, 2009

Recycling and reuse of waste concrete in China pp. 107-112

Xuping Li

A conceptual modeling of ecological greywater recycling system in Kuching city, Sarawak, Malaysia pp. 113-121

Darrien Yau Seng Mah, Charles Hin Joo Bong, Frederik Josep Putuhena and Salim Said

Determination of a recyclability index for the PET glycolysis pp. 122-128

E.S. Barboza, D.R. Lopez, S.C. Amico and C.A. Ferreira

Biodiesel production in a small community: Case study in Thailand pp. 129-135

Chantaraporn Phalakornkule, Anurak Petiruksakul and Wirote Puthavithi

Extended producer responsibility in a non-OECD context: The management of waste electrical and electronic equipment in India pp. 136-144

Panate Manomaivibool

Benefit analysis on replacing in situ concreting with precast slabs for temporary construction works in pursuing sustainable construction practice pp. 145-148

Li-yin Shen, Vivian Wing-yan Tam and Chao-yang Li

Application of Water Source Diagram (WSD) method for the reduction of water consumption in petroleum refineries pp. 149-154

A.A. Ulson de Souza, E. Forgiarini, H.L. Brandão, M.F. Xavier, F.L.P. Pessoa and S.M.A. Guelli U. Souza

Norms and economic motivation in household recycling: Empirical evidence from Sweden pp. 155-165

Olle Hage, Patrik Söderholm and Christer Berglund

Characterization of Municipal Solid Waste (MSW) and a proposed management plan for Kharagpur, West Bengal, India pp. 166-174

K. Naresh Kumar and Sudha Goel

Volume 53, issue 1, 2008

Spent hydroprocessing catalyst management: A review pp. 1-26

M. Marafi and A. Stanislaus

Utilization of spent foundry sand in controlled low-strength materials and concrete pp. 27-35

Rafat Siddique and Albert Noumowe

Recycling and reuse of waste concrete in China pp. 36-44

Xuping Li

Assessment of factors influencing the performance of solid waste recycling programs pp. 45-56

Samonporn Suttibak and Vilas Nitivattananon

Price effects of mergers in natural resources industries pp. 57-69

Linda Wårell and Robert Lundmark

Quality assessment of mined MSW from an open dumpsite for recycling potential pp. 70-78

Tawach Prechthai, Maddala Padmasri and Chettiyappan Visvanathan

Representations of environmental concerns in cost–benefit analyses of solid waste recycling pp. 79-85

Joe Pickin

Energy and environmental indicators related to construction of office buildings pp. 86-95

A. Dimoudi and C. Tompa

Fresh tomato packinghouses waste as high added-value biosource pp. 96-106

Ezio Riggi and Giovanni Avola