Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 116, issue C, 2017

Solid waste management transformation and future challenges of source separation and recycling practice in Malaysia pp. 1-14

YiingChiee Moh and -->Abd Manaf, Latifah

Environmental and economic assessment of pavement construction and management practices for enhancing pavement sustainability pp. 15-31

João Santos, Gerardo Flintsch and Adelino Ferreira

Harvesting the unexplored potential of European waste materials for road construction pp. 32-44

L.D. Poulikakos, C. Papadaskalopoulou, B. Hofko, F. Gschösser, A. Cannone Falchetto, M. Bueno, M. Arraigada, J. Sousa, R. Ruiz, C. Petit, M. Loizidou and M.N. Partl

Life cycle assessment of non-alcoholic single-serve polyethylene terephthalate beverage bottles in the state of California pp. 45-52

DongHo Kang, Rafael Auras and Jay Singh

Variability-based optimal design for robust plastic recycling systems pp. 53-60

Jun Nakatani, Kiyoto Konno and Yuichi Moriguchi

Total residual output flows of the economy: Methodology and application in the case of the Czech Republic pp. 61-69

Jan Kovanda

Time-varying losses in material flows of steel using dynamic material flow models pp. 70-83

Alicia Gauffin, Nils Å.I. Andersson, Per Storm, Anders Tilliander and Pär G. Jönsson

Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model pp. 84-93

Stefan Pauliuk, Yasushi Kondo, Shinichiro Nakamura and Kenichi Nakajima

Assessment of household water use efficiency using performance indices pp. 94-106

Paula Vieira, Catarina Jorge and Dídia Covas

Environmental impact of Recover cotton in textile industry pp. 107-115

F.A. Esteve-Turrillas and M. de la Guardia

Exploring factors influencing post-consumer gypsum recycling and landfilling in the European Union pp. 116-123

Ana Jiménez-Rivero and Justo García-Navarro

Energy and eMergy assessment of the production and operation of a personal computer pp. 124-136

Antonio Puca, Marco Carrano, Gengyuan Liu, Dimitri Musella, Maddalena Ripa, Silvio Viglia and Sergio Ulgiati

The current status of the consumer electronics repair industry in the U.S.: A survey-based study pp. 137-151

Mostafa Sabbaghi, Willie Cade, Sara Behdad and Ann M. Bisantz

Phosphorus recovery potential in Sofia WWTP in view of the national sludge management strategy pp. 152-159

Irina Ribarova, Sonja Dimitrova, Ralitsa Lambeva, Thomas Wintgens, Jan Stemann and Kirsten Remmen

Significant barriers to green procurement in real estate development pp. 160-168

Liyin Shen, Zhenyu Zhang and Zhijian Long

Whole-building Life Cycle Assessment (LCA) of a passive house of the sub-tropical climatic zone pp. 169-177

Angeliki Kylili, Milos Ilic and Paris A. Fokaides

Economic performance evaluation of bio-waste treatment technology at the facility level pp. 178-184

Djavan De Clercq, Zongguo Wen and Fan Fei

Volume 115, issue C, 2016

Consumer preferences and demand for packaging material and recyclability pp. 1-8

Kimberly Klaiman, David Ortega and Cloé Garnache

Follow the N and P road: High-resolution nutrient flow analysis of the Flanders region as precursor for sustainable resource management pp. 9-21

Joeri Coppens, Erik Meers, Nico Boon, Jeroen Buysse and Siegfried E. Vlaeminck

Optimal policy design for photovoltaic power industry with positive externality in China pp. 22-30

Tian Wu, Wei Zhou, Xiaoyu Yan and Xunmin Ou

A preliminary environmental assessment of foil and metallized film centered laminates pp. 31-41

Jacob Bayus, Changfeng Ge and Brian Thorn

Inferred equations for predicting cumulative exergy extraction throughout cradle-to-gate life cycles of Pangasius feeds and intensive Pangasius grow-out farms in Vietnam pp. 42-49

Trang T. Nhu, Quan H. Le, Peter ter Heide, Roel Bosma, Patrick Sorgeloos, Jo Dewulf and Thomas Schaubroeck

Multi-method assessment of household waste management in Geneva regarding sorting and recycling pp. 50-62

Francis C. Bergeron

Volume 114, issue C, 2016

End-of-life vehicles allocation management under multiple uncertainties: An interval-parameter two-stage stochastic full-infinite programming approach pp. 1-17

Vladimir Simic

Circular economy: To be or not to be in a closed product loop? A Life Cycle Assessment of aluminium cans with inclusion of alloying elements pp. 18-31

Monia Niero and Stig Irving Olsen

Performance evaluation and benchmarking of global waste management systems pp. 32-41

Atiq Uz Zaman and Mohammad Shahidul Hasan Swapan

A method for manual disassembly analysis to support the ecodesign of electronic displays pp. 42-58

Natalia Alonso Movilla, Peggy Zwolinski, Jo Dewulf and Fabrice Mathieux

System Dynamics Modeling of Indium Material Flows under Wide Deployment of Clean Energy Technologies pp. 59-71

Chul Hun Choi, Jinjian Cao and Fu Zhao

Will they recycle? Design and implementation of eco-feedback technology to promote on-the-go recycling in a university environment pp. 72-79

Eliana Mozo-Reyes, Jenna R. Jambeck, Patricia Reeves and Kyle Johnsen

Applying value chain analysis to informal sector recycling: A case study of the Zabaleen pp. 80-91

Remi Jaligot, David C. Wilson, Christopher R. Cheeseman, Berti Shaker and Joachim Stretz

Characterization of municipal solid waste collection operations pp. 92-102

Megan K. Jaunich, James W. Levis, Joseph F. DeCarolis, Eliana V. Gaston, Morton A. Barlaz, Shannon L. Bartelt-Hunt, Elizabeth G. Jones, Lauren Hauser and Rohit Jaikumar

The disposal and willingness to pay for residents scrap fluorescent lamps in China: A case study of Beijing pp. 103-111

Xi Tian, Yufeng Wu, Shen Qu, Sai Liang, Ming Xu and Tieyong Zuo

Modelling global extraction, supply, price and depletion of the extractable geological resources with the LITHIUM model pp. 112-129

Harald Ulrik Sverdrup

A system dynamics model for platinum group metal supply, market price, depletion of extractable amounts, ore grade, recycling and stocks-in-use pp. 130-152

Harald U. Sverdrup and Kristin Vala Ragnarsdottir

Modeling the causes of food wastage in Indian perishable food supply chain pp. 153-167

Balaji M. and Arshinder K.

Implementation of OPTIMASS to optimise municipal wastewater sludge processing chains: Proof of concept pp. 168-178

Annelies De Meyer, Dirk Cattrysse, Pieter Ostermeyer and Jos Van Orshoven

Volume 113, issue C, 2016

An initial life cycle assessment of rare earth oxides production from ion-adsorption clays pp. 1-11

Ehsan Vahidi, Julio Navarro and Fu Zhao

Estimates of global REE recycling potentials from NdFeB magnet material pp. 12-27

Rita Schulze and Matthias Buchert

Precious metals recovery from waste printed circuit boards: A review for current status and perspective pp. 28-39

Yan Lu and Zhenming Xu

What motivates households recycling behaviour in recycling schemes of different maturity? Lessons from Lithuania and Sweden pp. 40-52

Jurate Miliute-Plepiene, Olle Hage, Andrius Plepys and Algirdas Reipas

Wastewater as a resource: Strategies to recover resources from Amsterdam’s wastewater pp. 53-64

Jan Peter van der Hoek, Heleen de Fooij and André Struker

Identifying ways of closing the metal flow loop in the global mobile phone product system: A system dynamics modeling approach pp. 65-76

Rajib Sinha, Rafael Laurenti, Jagdeep Singh, Maria E. Malmström and Björn Frostell

Review of critical material studies pp. 77-87

Yanya Jin, Junbeum Kim and Bertrand Guillaume

A multilevel sustainability analysis of zinc recovery from wastes pp. 88-105

Kok Siew Ng, Ian Head, Giuliano C. Premier, Keith Scott, Eileen Yu, Jon Lloyd and Jhuma Sadhukhan

Public perceptions of water shortages, conservation behaviors, and support for water reuse in the U.S pp. 106-115

Laura Garcia-Cuerva, Emily Z. Berglund and Andrew R. Binder

Modeling the dynamic mechanism between cement CO2 emissions and clinker quality to realize low-carbon cement pp. 116-126

Zhi Cao, Lei Shen, Jianan Zhao, Litao Liu, Shuai Zhong and Yan Yang

Comparison of carbon dioxide emissions intensity of steel production in China, Germany, Mexico, and the United States pp. 127-139

Ali Hasanbeigi, Marlene Arens, Jose Carlos Rojas Cardenas, Lynn Price and Ryan Triolo

Energy gases and related carbon emissions in China pp. 140-148

Jing Yang, Jingli Wu, Tao He, Lingyue Li, Dezhi Han, Zhiqi Wang and Jinhu Wu

Improving information flow on chemicals in electronic products and E-waste to minimize negative consequences for health and the environment pp. 149-164

Caroline E. Scruggs, Nardono Nimpuno and Rachel B.B. Moore

Volume 112, issue C, 2016

Phosphorus flows in Berlin-Brandenburg, a regional flow analysis pp. 1-14

Tim F.H. Theobald, Mark Schipper and Jürgen Kern

Long-term model-based projections of energy use and CO2 emissions from the global steel and cement industries pp. 15-36

Bas van Ruijven, Detlef P. van Vuuren, Willem Boskaljon, Maarten L. Neelis, Deger Saygin and Martin K. Patel

Towards a more Circular Economy: Proposing a framework linking sustainable public procurement and sustainable business models pp. 37-44

Sjors Witjes and Rodrigo Lozano

The outer influence inside us: Exploring the relation between social and personal norms pp. 45-53

Raquel Bertoldo and Paula Castro

Greening Chinese chemical industrial park by implementing industrial ecology strategies: A case study pp. 54-64

Jeremy H. Yune, Jinping Tian, Wei Liu, Lujun Chen and Cathy Descamps-Large

Investigation into cross-contamination during cleaning efficiency testing in PET recycling pp. 65-72

Frank Welle

An empirical survey on the obsolescence of appliances in German households pp. 73-82

Laura Hennies and Rainer Stamminger

Incorporating uncertainty in the life cycle assessment of biodiesel from waste cooking oil addressing different collection systems pp. 83-92

Carla Caldeira, João Queirós, Arash Noshadravan and Fausto Freire

Problems in Japan’s governance system related to end-of-life electrical and electronic equipment trade pp. 93-106

Yoshihisa Sugimura and Shinsuke Murakami

Investigation of the primary production routes of nickel and cobalt products used for Li-ion batteries pp. 107-122

Tobias Schmidt, Matthias Buchert and Liselotte Schebek