Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 100, issue C, 2015

Evolving materials, attributes, and functionality in consumer electronics: Case study of laptop computers pp. 1-10

Barbara V. Kasulaitis, Callie W. Babbitt, Ramzy Kahhat, Eric Williams and Erinn G. Ryen

Toward the efficient recycling of alloying elements from end of life vehicle steel scrap pp. 11-20

Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo, Shinichiro Nakamura and Tetsuya Nagasaka

Deconstruction of wood-framed houses: Material recovery and environmental impact pp. 21-30

Vasil Diyamandoglu and Lorena M. Fortuna

A comparison of energy use, water use and carbon footprint of cassava starch production in Thailand, Vietnam and Colombia pp. 31-40

Thierry Tran, Guillaume Da, Martín Alonso Moreno-Santander, Gustavo Adolfo Vélez-Hernández, Andrès Giraldo-Toro, Kuakoon Piyachomkwan, Klanarong Sriroth and Dominique Dufour

Updated CO2 emission from Mg production by Pidgeon process: Implications for automotive application life cycle pp. 41-48

Huiquan Li, Wenjuan Zhang, Qiang Li and Bo Chen

Material use for electricity generation with carbon dioxide capture and storage: Extending life cycle analysis indices for material accounting pp. 49-57

Bhawna Singh, Evert A. Bouman, Anders H. Strømman and Edgar G. Hertwich

Designing a multi-echelon reverse logistics operation and network: A case study of office paper in Beijing pp. 58-69

Xiaoguang Zhou and Yanhui Zhou

A field based methodology for estimating waste generation rates at various stages of construction projects pp. 70-80

Amal Bakshan, Issam Srour, Ghassan Chehab and Mutasem El-Fadel

Effect of the use of industrial excess heat in district heating on greenhouse gas emissions: A systems perspective pp. 81-87

Jenny Ivner and Sarah Broberg Viklund

Volume 99, issue C, 2015

Availability of crop by-products in Spain: New raw materials for natural thermal insulation pp. 1-6

M. Palumbo, J. Avellaneda and A.M. Lacasta

Patterns in trash: Factors driving municipal recycling in Massachusetts pp. 7-18

Jared Starr and Craig Nicolson

Differences in waste generation, waste composition, and source separation across three waste districts in a New York suburb pp. 19-28

Omkar Aphale, Krista L. Thyberg and David J. Tonjes

Key factors to explain recycling, car use and environmentally responsible purchase behaviors: A comparative perspective pp. 29-39

Natalia López-Mosquera, Fernando Lera-López and Mercedes Sánchez

Appropriateness of environmental impact distribution methods to model blast furnace slag recycling in cement making pp. 40-47

Marcella Ruschi Mendes Saade, Maristela Gomes da Silva and Vanessa Gomes

Multicriteria optimization of copper scrap management strategy pp. 48-62

Marie Bonnin, Catherine Azzaro-Pantel, Serge Domenech and Jacques Villeneuve

Incentives for waste cooking oil collection in South Korea: A contingent valuation approach pp. 63-71

Sangmin Cho, Jihyo Kim, Hi-Chun Park and Eunnyeong Heo

Integrating durability-based service-life predictions with environmental impact assessments of natural fiber–reinforced composite materials pp. 72-83

Sabbie A. Miller, Wil V. Srubar, Sarah L. Billington and Michael D. Lepech

Modelling metabolism based performance of an urban water system using WaterMet2 pp. 84-99

Kourosh Behzadian and Zoran Kapelan

Life cycle assessment of biodegradable waste treatment systems for sub-Saharan African cities pp. 100-110

A.J. Komakech, C. Sundberg, H. Jönsson and B. Vinnerås

Contingent valuation method applied to waste management pp. 111-117

Sandra Ferreira and Rc Marques

Volume 98, issue C, 2015

The material flows of lead in the Czech Republic pp. 1-8

Kamila Bicanová, Zdeňka Wittlingerová, Jaroslav Dvořák and Magdaléna Zimová

Estimating the quantities of critical metals embedded in ICT and consumer equipment pp. 9-18

Perrine Chancerel, Max Marwede, Nils F. Nissen and Klaus-Dieter Lang

A two-stage interval-stochastic programming model for planning end-of-life vehicles allocation under uncertainty pp. 19-29

Vladimir Simic

Comparative economic analysis of inter-crop based conservation bench terrace and conventional systems in a sub-humid climate of India pp. 30-40

V.N. Sharda, Pradeep Dogra and D.R. Sena

Garbage: How population, landmass, and development interact with culture in the production of waste pp. 41-54

D. Paul Brown

Production and trade analysis in the Iberian cork sector: Economic characterization of a forest industry pp. 55-66

Jorge Sierra-Pérez, Jesús Boschmonart-Rives and Xavier Gabarrell

Characterization, quantification and management of household solid waste: A case study in China pp. 67-75

Binxian Gu, Haikun Wang, Zun Chen, Suqin Jiang, Weimo Zhu, Miaomiao Liu, Yangqing Chen, Yi Wu, Sheng He, Rong Cheng, Jie Yang and Jun Bi

Virtual water management and the water–energy nexus: A case study of three Mid-Atlantic states pp. 76-84

Young-Doo Wang, Jae Seung Lee, Lawrence Agbemabiese, Kenneth Zame and Sung-Goo Kang

Volume 97, issue C, 2015

Assessing low quality water use policy framework: Case study from Ghana pp. 1-15

Owusu Amponsah, Håkan Vigre, Torben Wilde Schou, Ethel Seiwaa Boateng, Imoro Braimah and Robert Clement Abaidoo

Economic and environmental comparison between two scenarios of waste management: MBT vs thermal treatment pp. 16-23

D. Panepinto, G.A. Blengini and G. Genon

Polymer recycling codes for distributed manufacturing with 3-D printers pp. 24-30

Emily J. Hunt, Chenlong Zhang, Nick Anzalone and Joshua Pearce

Differences in self reported recycling behavior of first and second generation South Asians in Ontario, Canada pp. 31-43

Calvin Lakhan

Leveraging intellectual property rights to encourage green product design and remanufacturing for sustainable waste management pp. 44-54

Mark Krystofik, Jeffrey Wagner and Gabrielle Gaustad

Optimisation of the economic, environmental and administrative efficiency of the municipal waste management model in rural areas pp. 55-65

Jana Põldnurk

Metallurgical recycling processes: Sustainability ratios and environmental performance assessment pp. 66-75

N. Jamali-Zghal, B. Lacarrière and O. Le Corre

A literature review and perspectives in reverse logistics pp. 76-92

Saurabh Agrawal, Rajesh K. Singh and Qasim Murtaza

Resources of post-consumer wood waste originating from the construction sector in Poland pp. 93-99

Ewa Ratajczak, Gabriela Bidzińska, Aleksandra Szostak and Magdalena Herbeć

Volume 96, issue C, 2015

LCA based comparative study of a microbial oil production starch wastewater treatment plant and its improvements with the combination of CHP system in Shandong, China pp. 1-10

Luis Vera, Wei Sun, Maria Iftikhar and Junteng Liu

Modeling and assessment of e-waste take-back strategies in India pp. 11-18

Maheshwar Dwivedy, Pratik Suchde and R.K. Mittal

Framework for the evaluation of anthropogenic resources: A landfill mining case study – Resource or reserve? pp. 19-30

Andrea Winterstetter, David Laner, Helmut Rechberger and Johann Fellner

Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat pp. 31-39

Linda Olsson, Elisabeth Wetterlund and Mats Söderström

Emergy and greenhouse gas assessment of a sustainable, integrated agricultural model (SIAM) for plant, animal and biogas production: Analysis of the ecological recycle of wastes pp. 40-50

Xihui Wu, Faqi Wu, Xiaogang Tong, Jia Wu, Lu Sun and Xiaoyu Peng

Technical analysis of crop residue biomass energy in an agricultural region of Ghana pp. 51-60

Ezekiel Anabire Ayamga, Francis Kemausuor and Ahmad Addo

A three-stage methodology for initiating an effective management system for electronic waste in Turkey pp. 61-70

Vildan Çetinsaya Özkır, Tuğba Efendigil, Tufan Demirel, Nihan Çetin Demirel, Muhammet Deveci and Burak Topçu

Volume 95, issue C, 2015

Environmental impact of recycling digested food waste as a fertilizer in agriculture—A case study pp. 1-14

Yoon Lin Chiew, Johanna Spångberg, Andras Baky, Per-Anders Hansson and Håkan Jönsson

Novel bottom-up urban water demand forecasting model: Revealing the determinants, drivers and predictors of residential indoor end-use consumption pp. 15-37

Anas A. Makki, Rodney A. Stewart, Cara D. Beal and Kriengsak Panuwatwanich

Evaluating the effects of unit based waste disposal schemes on the collection of household recyclables in Ontario, Canada pp. 38-45

Calvin Lakhan

Social impact assessment of informal recycling of electronic ICT waste in Pakistan using UNEP SETAC guidelines pp. 46-57

Shakila Umair, Anna Björklund and Elisabeth Ekener Petersen

Extending the Theory of Planned Behavior in the context of recycling: The role of moral norms and of demographic predictors pp. 58-67

Iosif Botetzagias, Andora-Fani Dima and Chrysovalantis Malesios

Toward a systematized framework for resource efficiency indicators pp. 68-76

Sofie Huysman, Serenella Sala, Lucia Mancini, Fulvio Ardente, Rodrigo A.F. Alvarenga, Steven De Meester, Fabrice Mathieux and Jo Dewulf

Enhancing organic waste separation at the source behavior: A case study of the application of motivation mechanisms in communities in Thailand pp. 77-90

K. Boonrod, S. Towprayoon, S. Bonnet and S. Tripetchkul

Why does the informal sector of end-of-life vehicle treatment thrive? A case study of China and lessons for developing countries in motorization process pp. 91-99

Shuhan Hu and Zongguo Wen

Biomass streams in Austria: Drawing a complete picture of biogenic material flows within the national economy pp. 100-111

Gerald Kalt

Assessing land-use impacts by clean vehicle systems pp. 112-119

Patricia Pontau, Yi Hou, Hua Cai, Yi Zhen, Xiaoping Jia, Anthony S.F. Chiu and Ming Xu

Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey pp. 120-132

Huseyin Selcuk Kilic, Ufuk Cebeci and Mustafa Batuhan Ayhan

Diversion, but at what cost? The economic challenges of recycling in Ontario pp. 133-142

Calvin Lakhan

Toward the implementation of new regional biowaste management plans: Environmental assessment of different waste management scenarios in Catalonia pp. 143-155

Joan Colón, Erasmo Cadena, Ana Belen Colazo, Roberto Quirós, Antoni Sánchez, Xavier Font and Adriana Artola

Administrative and market-based allocation mechanism for regional water resources planning pp. 156-173

Yan Tu, Xiaoyang Zhou, Jun Gang, Merrill Liechty, Jiuping Xu and Benjamin Lev

Synthesis of 2-methyl tetrahydrofuran from various lignocellulosic feedstocks: Sustainability assessment via LCA pp. 174-182

Hsien H. Khoo, Loretta L. Wong, Jonathan Tan, Valerio Isoni and Paul Sharratt

A study on material metabolism in Hebei iron and steel industry analysis pp. 183-192

Tiejun Dai

The criticality of four nuclear energy metals pp. 193-201

E.M. Harper, Zhouwei Diao, Stefania Panousi, Philip Nuss, Matthew J. Eckelman and T.E. Graedel