Resources, Conservation & Recycling

1995 - 2017

Current editor(s): Ming Xu

From Elsevier
Bibliographic data for series maintained by Kai Meng ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 54, issue 12, 2010

Waste foundry sand and its leachate characteristics pp. 1027-1036

Rafat Siddique, Gurdeep Kaur and Anita Rajor

Utilization of municipal solid waste (MSW) ash in cement and mortar pp. 1037-1047

Rafat Siddique

Critical review of medical waste legislation in Spain pp. 1048-1059

E. Insa, M. Zamorano and R. López

Utilization of coal combustion by-products in sustainable construction materials pp. 1060-1066

Rafat Siddique

Abiotic depletion due to resource consumption in a steelwork assessed by five different methods pp. 1067-1073

Jo Van Caneghem, Isabel Vermeulen, Chantal Block, Patrick Cramm, Ronald Mortier and Carlo Vandecasteele

Physical geonomics: Combining the exergy and Hubbert peak analysis for predicting mineral resources depletion pp. 1074-1083

Alicia Valero and Antonio Valero

Iron ore and steel production trends and material flows in the world: Is this really sustainable? pp. 1084-1094

Mohan Yellishetty, P.G. Ranjith and A. Tharumarajah

Identification and testing of potential key parameters in system analysis of municipal solid waste management pp. 1095-1099

O. Eriksson and A. Baky

Charging for domestic waste in England: Combining environmental and equity considerations pp. 1100-1108

Simon Dresner and Paul Ekins

Environmental and economical assessment of sewage sludge compost application on soil and plants in a landfill pp. 1109-1116

Uhram Song and Eun Ju Lee

Alarming visual display monitors affecting shower end use water and energy conservation in Australian residential households pp. 1117-1127

Rachelle M. Willis, Rodney A. Stewart, Kriengsak Panuwatwanich, Sarah Jones and Andreas Kyriakides

Assessment of Ecodesign potential in reaching new recycling targets pp. 1128-1134

Alessandro Santini, Christoph Herrmann, Fabrizio Passarini, Ivano Vassura, Tobias Luger and Luciano Morselli

Environmental benefits of substituting talc by sugarcane bagasse fibers as reinforcement in polypropylene composites: Ecodesign and LCA as strategy for automotive components pp. 1135-1144

Sandra M. Luz, Armando Caldeira-Pires and Paulo M.C. Ferrão

Cleaner production alternatives for saponin industry by recycling starch pp. 1145-1151

Hui Li, Jinren Ni, Wei Liu and Yuling Zhu

Life cycle primary energy implication of retrofitting a wood-framed apartment building to passive house standard pp. 1152-1160

Ambrose Dodoo, Leif Gustavsson and Roger Sathre

Material flow analysis of polyethylene terephthalate in the US, 1996–2007 pp. 1161-1169

Brandon Kuczenski and Roland Geyer

Life cycle analysis (LCA) for the incorporation of rice husk ash in mortar coating pp. 1170-1176

Carlos Alberto Mendes Moraes, Amanda Gonçalves Kieling, Marcelo Oliveira Caetano and Luciana Paulo Gomes

Input, stocks and output flows of urban residential building system in Beijing city, China from 1949 to 2008 pp. 1177-1188

Dan Hu, Fang You, Yanhua Zhao, Ye Yuan, Tianxing Liu, Aixin Cao, Zhen Wang and Junlian Zhang

Improving environmental performance of magnesium instrument panels pp. 1189-1195

A. Tharumarajah and P. Koltun

The utility of Life Cycle Assessment in the ready meal food industry pp. 1196-1207

Luis Alberto Calderón, Loreto Iglesias, Adriana Laca, Mónica Herrero and Mario Díaz

Paper and biomass for energy? pp. 1208-1218

Jobien Laurijssen, Marc Marsidi, Annita Westenbroek, Ernst Worrell and Andre Faaij

Implementing by-product management into the Life Cycle Assessment of the mussel sector pp. 1219-1230

Diego Iribarren, María Teresa Moreira and Gumersindo Feijoo

LCA allocation procedure used as an incitative method for waste recycling: An application to mineral additions in concrete pp. 1231-1240

C. Chen, G. Habert, Y. Bouzidi, A. Jullien and A. Ventura

A life cycle assessment of the closed-loop recycling and thermal recovery of post-consumer PET pp. 1241-1249

Tom Chilton, Stephen Burnley and Suresh Nesaratnam

Environmental inventory modelling of the use of compost and peat in growth media preparation pp. 1250-1260

Alessio Boldrin, Karin R. Hartling, Maria Laugen and Thomas H. Christensen

The Semantics of Garbage and the organization of the recyclers: Implementation challenges for establishing recycling cooperatives in the city of Rio de Janeiro, Brazil pp. 1261-1268

Maria Scarlet Do Carmo and Jose Antonio Puppim de Oliveira

Environmental impact efficiency in mussel cultivation pp. 1269-1277

Sebastián Lozano, Diego Iribarren, María Teresa Moreira and Gumersindo Feijoo

Industrial symbiosis and waste recovery in an Indian industrial area pp. 1278-1287

Ariana Bain, Megha Shenoy, Weslynne Ashton and Marian Chertow

Socio-economic profile and profitability of faecal sludge emptying companies pp. 1288-1295

M. Mbéguéré, J.B. Gning, P.H. Dodane and D. Koné

Survey of officials’ awareness on circular economy development in China: Based on municipal and county level pp. 1296-1302

Bing Xue, Xing-peng Chen, Yong Geng, Xiao-jia Guo, Cheng-peng Lu, Zi-long Zhang and Chen-yu Lu

Recycling pulp mill sludge to improve soil fertility using GIS tools pp. 1303-1311

Paulo Ribeiro, António Albuquerque, Luis Quinta-Nova and Victor Cavaleiro

The use of recycled metal in dentistry: Evaluation of mechanical properties of titanium waste recasting pp. 1312-1316

José Bauer, Suelen Cella, Marcelo M. Pinto, José Ferreira Costa, Alessandra Reis and Alessandro D. Loguercio

Separate collection practice of packaging waste as an example of Küçükçekmece, Istanbul, Turkey pp. 1317-1321

Gül S. Akçay Han, Nihal Bektaş and M. Salim Öncel

Resolving strategy paradoxes of water loss reduction: A synthesis in Jakarta pp. 1322-1330

M. Schouten and R.D. Halim

Recycling utilization patterns of coal mining waste in China pp. 1331-1340

Liu Haibin and Liu Zhenling

Issues and options in waste management: A social cost–benefit analysis of waste-to-energy in the UK pp. 1341-1352

Tooraj Jamasb and Rabindra Nepal

A performance evaluation of MSW management practice in Taiwan pp. 1353-1361

Chung-Chiang Chen

A water network optimization using MATLAB—A case study pp. 1362-1367

Ljubica Matijašević, Igor Dejanović and Damjan Spoja

Utilization of sulfate-rich solid wastes in rural road construction in the Three Gorges Reservoir pp. 1368-1376

Dun Qiao, Jueshi Qian, Qinzhen Wang, Yudong Dang, Hua Zhang and Deqiang Zeng

A technical assessment of topsoil production from dredged material pp. 1377-1385

C. Sheehan, J. Harrington and J.D. Murphy

Resource consumption of pharmaceutical waste solvent valorization alternatives pp. 1386-1392

Geert Van der Vorst, Pilar Swart, Wim Aelterman, Andres Van Brecht, Eddy Graauwmans, Herman Van Langenhove and Jo Dewulf

Sustainability and industrial symbiosis—The evolution of a Finnish forest industry complex pp. 1393-1404

Suvi Pakarinen, Tuomas Mattila, Matti Melanen, Ari Nissinen and Laura Sokka

The modified water source diagram method applied to reuse of textile industry continuous washing water pp. 1405-1411

Antônio Augusto Ulson de Souza, Aline Resmini Melo, Fernando Luiz Pellegrini Pessoa and Selene Maria de Arruda Guelli Ulson de Souza

Evaluation of containerized substrates developed from cattle manure compost and synthetic aggregates for ornamental plant production as a peat alternative pp. 1412-1418

G.Y. Jayasinghe, I.D. Liyana Arachchi and Yoshihiro Tokashiki

Green product purchase intention: Some insights from a developing country pp. 1419-1427

T. Ramayah, Jason Wai Chow Lee and Osman Mohamad

Recycling of municipal solid waste incineration fly ash for ordinary Portland cement production: A real-scale test pp. 1428-1435

Lei Wang, Yiying Jin, Yongfeng Nie and Rundong Li

Tracking the devil's metal: Historical global and contemporary U.S. tin cycles pp. 1436-1441

Catherine F. Izard and Daniel B. Müller

A game-theoretic analysis of implementation of cleaner production policies in the Chinese electroplating industry pp. 1442-1448

Xiaoqing Dong, Chaolin Li, Ji Li, Jia Wang and Wantao Huang

Rainwater tanks in multi-unit buildings: A case study for three Australian cities pp. 1449-1452

Erhan Eroksuz and Ataur Rahman

Recycling lead-based paint contaminated deconstructed masonry materials as aggregate for Portland cement concrete—A cost effective and environmental friendly approach pp. 1453-1460

Jiong Hu, Kejin Wang and James A. Gaunt

Volume 54, issue 11, 2010

Projecting municipal solid waste: The case of Hong Kong SAR pp. 759-768

Shan Shan Chung

Properties and microstructure of lightweight aggregate produced from lignite coal fly ash and recycled glass pp. 769-775

Ioanna Kourti and Christopher R. Cheeseman

Modeling climate change impacts of pavement production and construction pp. 776-782

Philip White, Jay S. Golden, Krishna P. Biligiri and Kamil Kaloush

Hybrid optimization approach for water allocation and mass exchange network pp. 783-792

Ramalingam Karthick, Ganesan Kumaraprasad and Balasubramanian Sruti

Comparison of carbon emissions associated with municipal solid waste management in Germany and the UK pp. 793-801

S. Mühle, I. Balsam and C.R. Cheeseman

Sustainable solid waste management toward an inclusive society: Integration of the informal sector pp. 802-809

Emenda Sembiring and Vilas Nitivattananon

Characteristic of low-temperature pyrolysis of printed circuit boards subjected to various atmosphere pp. 810-815

Jinhui Li, Huabo Duan, Keli Yu, Lili Liu and Siting Wang

Porous mullite composite with controlled pore structure processed using a freeze casting of TBA-based coal fly ash slurries pp. 816-820

T.Y. Yang, H.B. Ji, S.Y. Yoon, B.K. Kim and H.C. Park

Identifying improvements in water management of bus-washing stations in Brazil pp. 821-831

C.M.V.B. Almeida, D. Borges, S.H. Bonilla and B.F. Giannetti

The environmental impact of the construction phase: An application to composite walls from a life cycle perspective pp. 832-840

Oscar Ortiz, Jorgelina C. Pasqualino, Gloria Díez and Francesc Castells

Model scenario for integrated environmental product assessment at the use of raw materials stage of a product pp. 841-850

Y.L. Wong, K.M. Lee and K.C. Yung

Substance flow analysis of chromium and nickel in the material flow of stainless steel in Japan pp. 851-863

Ichiro Daigo, Yasunari Matsuno and Yoshihiro Adachi

The costs of municipal waste and recycling programs pp. 864-871

Robert A. Bohm, David H. Folz, Thomas Kinnaman and Michael J. Podolsky

Evaluation of energy demand and the sustainability of different bioethanol production processes from sugar beet pp. 872-877

Božidar Šantek, Gernot Gwehenberger, Mirela Ivančić Šantek, Michael Narodoslawsky and Predrag Horvat

Stabilization of recycled base materials with high carbon fly ash pp. 878-892

Bora Cetin, Ahmet H. Aydilek and Yucel Guney

Environmental assessment of home composting pp. 893-904

Joan Colón, Julia Martínez-Blanco, Xavier Gabarrell, Adriana Artola, Antoni Sánchez, Joan Rieradevall and Xavier Font

Resources, properties and utilization of tar pp. 905-915

Chunshan Li and Kenzi Suzuki

Energy impact of waste recyclable in a Brazilian metropolitan pp. 916-922

F.A.M. Lino, W.A. Bizzo, E.P. da Silva and K.A.R. Ismail

Life cycle assessment of raw materials for non-wood pulp mills: Hemp and flax pp. 923-930

S. González-García, A. Hospido, G. Feijoo and M.T. Moreira

Critical success factors for on-site sorting of construction waste: A china study pp. 931-936

Jiayuan Wang, Hongping Yuan, Xiangping Kang and Weisheng Lu

On the integration of planning and environmental impact assessment for a WEEE transportation network—A case study pp. 937-951

Rita Gamberini, Elisa Gebennini, Riccardo Manzini and Andrea Ziveri

Chemical recycling of post-consumer polymer waste over fluidizing cracking catalysts for producing chemicals and hydrocarbon fuels pp. 952-961

Ta-Tung Wei, Ken-Jer Wu, Sheau-Long Lee and Yeuh-Hui Lin

Conserving biodiversity through traditional beliefs in sacred groves in Uttarakhand Himalaya, India pp. 962-971

Ashish Anthwal, Nutan Gupta, Archana Sharma, Smriti Anthwal and KI-Hyun Kim

An estimation of the energy potential of agro-industrial residues in Spain pp. 972-984

Antonio Gómez, Javier Zubizarreta, Marcos Rodrigues, César Dopazo and Norberto Fueyo

Copper content in animal manures and potential risk of soil copper pollution with animal manure use in agriculture pp. 985-990

Xiong Xiong, Li Yanxia, Li Wei, Lin Chunye, Han Wei and Yang Ming

Managing e-waste in China: Policies, pilot projects and alternative approaches pp. 991-999

Jinglei Yu, Eric Williams, Meiting Ju and Chaofeng Shao

Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant pp. 1000-1006

Takahiro Nomura, Noriyuki Okinaka and Tomohiro Akiyama

Reducing solid waste in higher education: The first step towards ‘greening’ a university campus pp. 1007-1016

Danielle P. Smyth, Arthur L. Fredeen and Annie L. Booth

We care a lot: Formative research for a social marketing campaign to promote school-based recycling pp. 1017-1026

Abby Prestin and Katy E. Pearce

Volume 54, issue 10, 2010

The impact of product charges and EU directives on the level of packaging waste recycling in Poland pp. 609-614

Mohamed Alwaeli

An interactive optimization system for the location of supplementary recycling depots pp. 615-622

Hung-Yueh Lin, Guan-Hwa Chen, Pei-Hao Lee and Chun-Hsu Lin

Performance of rainwater harvesting systems in the southeastern United States pp. 623-629

Matthew P. Jones and William F. Hunt

Energy recovery in solid waste management through CDM in India and other countries pp. 630-640

Seema Unnikrishnan and Anju Singh

ICQSWM: An inexact chance-constrained quadratic solid waste management model pp. 641-657

Y. Sun, G.H. Huang and Y.P. Li

A study on the seawater purification characteristics of water-permeable concrete using recycled aggregate pp. 658-665

Seung Bum Park, Byung Jae Lee, Jun Lee and Young Il Jang

The long-term performance of two fly ash stabilized fine-grained soil subbases pp. 666-672

Sazzad Bin-Shafique, K. Rahman, Mustafa Yaykiran and Ireen Azfar

A fuzzy game theoretic approach for groundwater resources management: Application of Rubinstein Bargaining Theory pp. 673-682

Reza Kerachian, Mahsa Fallahnia, Mohammad Reza Bazargan-Lari, Abbas Mansoori and Hossein Sedghi

Fuon theory: Standardizing functional units for product design pp. 683-691

Daniel Collado-Ruiz and Hesamedin Ostad-Ahmad-Ghorabi

The role of furniture and appliance re-use organisations in England and Wales pp. 692-703

A. Curran and I.D. Williams

Realizing CO2 emission reduction through industrial symbiosis: A cement production case study for Kawasaki pp. 704-710

Shizuka Hashimoto, Tsuyoshi Fujita, Yong Geng and Emiri Nagasawa

A novel approach for the recycling of thin film photovoltaic modules pp. 711-718

Wolfgang Berger, Franz-Georg Simon, Karin Weimann and Erik A. Alsema

Dynamic performance metrics to assess sustainability and cost effectiveness of integrated urban water systems pp. 719-736

J.E. Fagan, M.A. Reuter and K.J. Langford

Measuring the status of stainless steel use in the Japanese socio-economic system pp. 737-743

Seiji Hashimoto, Ichiro Daigo, Matthew Eckelman and Barbara Reck

Cleaner production application as a sustainable production strategy, in a Turkish Printed Circuit Board Plant pp. 744-751

Başak Büyükbay, Nilgun Ciliz, Gun Evren Goren and Aydin Mammadov

Novel approach for the treatment and recycle of wastewater from soya edible oil refinery industry—An economic perspective pp. 752-758

K. Rajkumar, M. Muthukumar and R. Sivakumar

Volume 54, issue 9, 2010

Social factors influencing perceptions and willingness to pay for a market-based policy aiming on solid waste management pp. 533-540

N. Jones, K. Evangelinos, C.P. Halvadakis, T. Iosifides and C.M. Sophoulis

EIA of municipal solid waste disposal site in Varanasi using RIAM analysis pp. 541-546

M.K. Mondal, Rashmi, and B.V. Dasgupta

Development of a low-carbon product design system based on embedded GHG emissions pp. 547-556

Jong-Sung Song and Kun-Mo Lee

Substance flow analysis of aluminium in mainland China for 2001, 2004 and 2007: Exploring its initial sources, eventual sinks and the pathways linking them pp. 557-570

Weiqiang Chen, Lei Shi and Yi Qian

Automatic sorting of lightweight metal scrap by sensing apparent density and three-dimensional shape pp. 571-578

Shigeki Koyanaka and Kenichiro Kobayashi

Understanding transportation energy and technical metabolism of construction waste recycling pp. 579-590

Wai K. Chong and Christopher Hermreck

Iron and steel in Chinese residential buildings: A dynamic analysis pp. 591-600

Mingming Hu, Stefan Pauliuk, Tao Wang, Gjalt Huppes, Ester van der Voet and Daniel B. Müller

The application of environmental Gini coefficient (EGC) in allocating wastewater discharge permit: The case study of watershed total mass control in Tianjin, China pp. 601-608

Tao Sun, Hongwei Zhang, Yuan Wang, Xiangming Meng and Chenwan Wang

Volume 54, issue 8, 2010

Joint forest management in India: Experiences of two decades pp. 469-480

Prodyut Bhattacharya, Lolita Pradhan and Ganesh Yadav

Optimal safe groundwater yield for land conservation in a seashore area under uncertainty pp. 481-488

Ho-Wen Chen, Shu-Kuang Ning, Ruey-Fang Yu and Jeng-Chung Chen

Water end-uses in Brazilian office buildings pp. 489-500

Lúcio Costa Proença and Enedir Ghisi

Adoption and disposition of new and used computers in Lima, Peru pp. 501-505

Ramzy F. Kahhat and Eric D. Williams

Analysis of pollution materials generated from electrolytic manganese industries in China pp. 506-511

Ning Duan, Wang Fan, Zhou Changbo, Zhu Chunlei and Yu Hongbing

Assessment of Municipal Solid Waste management in Puducherry (Pondicherry), India pp. 512-520

Swati Pattnaik and M. Vikram Reddy

Economic instruments for solid waste management in South Africa: Opportunities and constraints pp. 521-531

A. Nahman and L. Godfrey

Volume 54, issue 7, 2010

Problems, prospects and current trends of copper recycling in India: An overview pp. 401-416

Archana Agrawal and K.K. Sahu

A successful pilot project demonstrating the re-use potential of bauxite residue in embankment construction pp. 417-421

Fotini Kehagia

United We Can: Resource recovery, place and social enterprise pp. 422-428

Crystal Tremblay, Jutta Gutberlet and Ana Maria Peredo

Effects of greywater irrigation on plant growth, water use and soil properties pp. 429-435

U. Pinto, B.L. Maheshwari and H.S. Grewal

Quantification of the waste stream from fresh tomato packinghouses and its fluctuations: Implications for waste management planning pp. 436-441

E. Riggi and G. Avola

Two quantitative indices for the planning and evaluation of eco-industrial parks pp. 442-448

Dai Tiejun

Long-term panning of waste diversion under interval and probabilistic uncertainties pp. 449-461

J. Su, G.H. Huang, B.D. Xi, X.S. Qin, S.L. Huo, Y.H. Jiang and X.R. Chen

Assessment of CO2 and priority pollutant reduction by installation of shoreside power pp. 462-467

William J. Hall

Volume 54, issue 6, 2010

Production of innovative, recycled and high-performance asphalt for road pavements pp. 337-347

Clara Celauro, Celauro Bernardo and Boscaino Gabriele

Sensitivity of the LCA allocation procedure for BFS recycled into pavement structures pp. 348-358

Shahinaz Sayagh, Anne Ventura, Tung Hoang, Denis François and Agnès Jullien

Modeling and optimization of biogas production from a waste digester using artificial neural network and genetic algorithm pp. 359-363

H. Abu Qdais, K. Bani Hani and N. Shatnawi

Development of a depletion indicator for natural resources used in concrete pp. 364-376

G. Habert, Y. Bouzidi, C. Chen and A. Jullien

Evaluation of the economic feasibility for the recycling of construction and demolition waste in China—The case of Chongqing pp. 377-389

W. Zhao, R.B. Leeftink and V.S. Rotter

A general methodology for calculating the MSW management self-sufficiency indicator: Application to the wider Barcelona area pp. 390-399

Maria Christina Fragkou, Teresa Vicent and Xavier Gabarrell

Volume 54, issue 5, 2010

Thermal degradation of olive solid waste: Influence of particle size and oxygen concentration pp. 271-277

Ajmia Chouchene, Mejdi Jeguirim, Basma Khiari, Fathi Zagrouba and Gwénaëlle Trouvé

Processing of sewage sludge: Dependence of sludge dewatering efficiency on amount of flocculant pp. 278-282

Jaroslav Boráň, Lucie Houdková and Thomas Elsäßer

Removal of reactive dyes from aqueous solutions using combined coagulation/flocculation and adsorption on activated carbon pp. 283-290

Franciele Regina Furlan, Laís Graziela de Melo da Silva, Ayres Ferreira Morgado, Antônio Augusto Ulson de Souza and Selene Maria Arruda Guelli Ulson de Souza

Estimation of the environmental impact of a petrochemical process using coupled LCA and exergy analysis pp. 291-298

Jean-François Portha, Sylvain Louret, Marie-Noëlle Pons and Jean-Noël Jaubert

Effect of the carbon source on N2O emissions during biological denitrification pp. 299-302

Nouceiba Adouani, Thomas Lendormi, Lionel Limousy and Olivier Sire

Minimising carbon footprint of regional biomass supply chains pp. 303-309

Hon Loong Lam, Petar Varbanov and Jiří Klemeš

Biohydrogen production by Rhodobacter capsulatus on acetate at fluctuating temperatures pp. 310-314

Ebru Özgür, Basar Uyar, Yavuz Öztürk, Meral Yücel, Ufuk Gündüz and Inci Eroğlu

Environmental performance assessment for reactive distillation processes pp. 315-325

Alexandra Elena Bonet-Ruiz, Jordi Bonet, Valentin Pleşu and Grigore Bozga

Analysis of alternative secondary heat uses to improve energy efficiency—case: A Finnish mechanical pulp and paper mill pp. 326-335

Pekka Ruohonen, Ilkka Hippinen, Mari Tuomaala and Pekka Ahtila

Volume 54, issue 4, 2010

Reuse of treated sewage in Delhi city: Microbial evaluation of STPs and reuse options pp. 211-221

Priyanka Jamwal and Atul K. Mittal

Evaluation of MSW organic fraction for composting: Separate collection or mechanical sorting pp. 222-228

Marga López, Montserrat Soliva, F. Xavier Martínez-Farré, Mónica Fernández and Oscar Huerta-Pujol

Recycling rechargeable lithium ion batteries: Critical analysis of natural resource savings pp. 229-234

Jo Dewulf, Geert Van der Vorst, Kim Denturck, Herman Van Langenhove, Wouter Ghyoot, Jan Tytgat and Kurt Vandeputte

Forecasting effluent quality of an industry wastewater treatment plant by evolutionary grey dynamic model pp. 235-241

Ho-Wen Chen, Ruey-Fang Yu, Shu-Kuang Ning and Hsin-Chih Huang

Factors influencing the rate of recycling: An analysis of Minnesota counties pp. 242-249

Shaufique F. Sidique, Satish V. Joshi and Frank Lupi

A life cycle based environmental impacts assessment of construction materials used in road construction pp. 250-255

Raja Chowdhury, Defne Apul and Tim Fry

Facility-level energy and greenhouse gas life-cycle assessment of the global nickel industry pp. 256-266

Matthew J. Eckelman

Volume 54, issue 3, 2010

Treatment of wastewater generated by urea production pp. 149-154

Ljubica Matijašević, Igor Dejanović and Hrvoje Lisac

Extended producer responsibility for packaging waste in South Africa: Current approaches and lessons learned pp. 155-162

Anton Nahman

The effects of behavior and attitudes on drop-off recycling activities pp. 163-170

Shaufique F. Sidique, Frank Lupi and Satish V. Joshi

Substance flow analysis of zinc in China pp. 171-177

Xueyi Guo, Juya Zhong, Yu Song and Qinghua Tian

Cost effectiveness and tradeoff on the use of rainwater tank: An empirical study in Australian residential decision-making pp. 178-186

Vivian W.Y. Tam, Leona Tam and S.X. Zeng

Empirical analysis of solid management waste costs: Some evidence from Galicia, Spain pp. 187-193

Germà Bel and Xavier Fageda

Deconstructing disaster: Economic and environmental impacts of deconstruction in post-Katrina New Orleans pp. 194-204

Hazel Denhart

Harmonizing procedures for the evaluation of compost maturity in two compost types in Ghana pp. 205-209

G.K. Ofosu-Budu, J.N. Hogarh, J.N. Fobil, A. Quaye, S.K.A. Danso and D. Carboo

Volume 54, issue 2, 2009

Household solid waste generation and characteristics in Cape Haitian city, Republic of Haiti pp. 73-78

Féniel Philippe and Marc Culot

Rainwater harvesting in petrol stations in Brasília: Potential for potable water savings and investment feasibility analysis pp. 79-85

Enedir Ghisi, Davi da Fonseca Tavares and Vinicius Luis Rocha

A robust interval-based minimax-regret analysis approach for the identification of optimal water-resources-allocation strategies under uncertainty pp. 86-96

Y.P. Li, G.H. Huang and S.L. Nie

Recycling of poly(methyl methacrylate) scrap in the styrene–methyl methacrylate copolymer cast sheet process pp. 97-103

K. Charmondusit and L. Seeluangsawat

Use of carbon footprinting to explore alternative household waste policy scenarios in an Irish city-region pp. 113-122

David Browne, O’Regan, Bernadette and Richard Moles

A planning scenario for the application of geographical information systems in municipal waste collection: A case of Churriana de la Vega (Granada, Spain) pp. 123-133

M. Zamorano, E. Molero, A. Grindlay, M.L. Rodríguez, A. Hurtado and F.J. Calvo

Bulk use of pond ash for cultivation of wheat–maize–eggplant crops in sequence on a fallow land pp. 134-139

Ramesh C. Tripathi, Reginald E. Masto and Lal C. Ram

Using information of the separation process of recycling scrap tires for process modelling pp. 140-148

A. Pehlken and D.H. Müller

Volume 54, issue 1, 2009

Utilization of waste materials and by-products in producing controlled low-strength materials pp. 1-8

Rafat Siddique

An evaluation of four key methods for monitoring household waste prevention campaigns in the UK pp. 9-20

Mike Read, Marten K. Gregory and Paul S. Phillips

Supporting waste and water management with proactive legal instruments pp. 21-27

M. Fehr, A.F.N. Pereira and A.K.A. Barbosa

A hybrid approach using ISM and fuzzy TOPSIS for the selection of reverse logistics provider pp. 28-36

Govindan Kannan, Shaligram Pokharel and P. Sasi Kumar

Study on recycled asphalt concrete for use in surface course in airport pavement pp. 37-44

Kai Su, Yoshitaka Hachiya and Ryota Maekawa

Green sand reclamation using a fluidized bed with an attrition nozzle pp. 45-52

Nestor Cruz, Cedric Briens and Franco Berruti

The dynamics of landfill diversion: Economic drivers, policy factors and spatial issues pp. 53-61

Massimiliano Mazzanti, Anna Montini and Francesco Nicolli

An integrated model for technology forecasting to reduce pollutant emission in China's pulp industry pp. 62-72

Chao Zhang, Zongguo Wen and Jining Chen