Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 21, issue 16, 2018

A fully coupled fluid-structure interaction model of the secondary lymphatic valve pp. 813-823

John T. Wilson, Lowell T. Edgar, Saurabh Prabhakar, Marc Horner, Raoul van Loon and James E. Moore

Hemodynamic investigation of a patient-specific abdominal aortic aneurysm with iliac artery tortuosity pp. 824-833

Yue Qiu, Ding Yuan, Ye Wang, Jun Wen and Tinghui Zheng

Validation of a model-based inverse kinematics approach based on wearable inertial sensors pp. 834-844

L. Tagliapietra, L. Modenese, E. Ceseracciu, C. Mazzà and M. Reggiani

Numerical study to evaluate the effect of a surface-based sensor on arterial tonometry pp. 845-851

Wookjin Lee, Jaiyoung Ryu, Hangsik Shin, Hong Sun Ryou and Seong Wook Cho

Volume 21, issue 15, 2018

Design of a resilient ring for middle ear’s chamber stapes prosthesis pp. 771-779

Emilia Anna Kiryk, Konrad Kamieniecki and Monika Kwacz

Novel methods for segment-specific blood flow simulation for the liver pp. 780-783

N. Barléon, R. J. Clarke and H. Ho

Development of a three-dimensional body shape model of young children for child restraint design pp. 784-794

Monica L. H. Jones, Sheila M. Ebert, Matthew P. Reed and Kathleen D. Klinich

Unloaded shape identification of human cornea by variational shape optimization pp. 795-802

Tomohiro Otani and Masao Tanaka

Boundary layer considerations in a multi-layer model for LDL accumulation pp. 803-811

Marcello Iasiello, Kambiz Vafai, Assunta Andreozzi and Nicola Bianco

Volume 21, issue 14, 2018

Influence of morphology and material properties on the range of motion of the costovertebral joint – a probabilistic finite element analysis pp. 731-739

Benedikt Schlager, Frank Niemeyer, Christian Liebsch, Fabio Galbusera, Julius Boettinger, Daniel Vogele and Hans-Joachim Wilke

Force feasible set prediction with artificial neural network and musculoskeletal model pp. 740-749

Vincent Hernandez, Nasser Rezzoug, Philippe Gorce and Gentiane Venture

A two way fully coupled fluid structure simulation of human ureter peristalsis pp. 750-759

Ahmed Tasnub Takaddus and Abhilash J. Chandy

MRI based 3D finite element modelling to investigate deep tissue injury pp. 760-769

Willeke A. Traa, Mark C. van Turnhout, Kevin M. Moerman, Jules L. Nelissen, Aart J. Nederveen, Gustav J. Strijkers, Dan L. Bader and Cees W. J. Oomens

Volume 21, issue 13, 2018

Preliminary simulation model toward the study of the effects caused by different mandibular advancement devices in OSAS treatment pp. 693-702

Agnese Brunzini, Antonio Gracco, Alida Mazzoli, Marco Mandolini, Steve Manieri and Michele Germani

A multiscale investigation of mechanical properties of bio-inspired scaffolds pp. 703-711

Yucong Gu, Mohan Yasodharababu and Arun K. Nair

The role of the facet capsular ligament in providing spinal stability pp. 712-721

Emily A. Bermel, Victor H. Barocas and Arin M. Ellingson

Anterosuperior protraction of maxillae using the extraoral device, RAMPA; finite element method pp. 722-729

Yasushi Mitani, Bumkyoo Choi and Jaehyuk Choi

Volume 21, issue 12, 2018

Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest pp. 655-662

J. Paulo Macedo, Jorge Pereira, João Faria, Júlio C. M. Souza, J. Luis Alves, José López-López and Bruno Henriques

Towards a patient-specific estimation of intra-operative femoral fracture risk pp. 663-672

L. Esposito, P. Bifulco, P. Gargiulo, M.K. Gíslason, M. Cesarelli, L. Iuppariello, H. Jónsson, A. Cutolo and M. Fraldi

Uncertainty analysis of material properties and morphology parameters in numerical models regarding the motion of lumbar vertebral segments pp. 673-683

Benedikt Schlager, Frank Niemeyer, Fabio Galbusera, David Volkheimer, René Jonas and Hans-Joachim Wilke

A computational study of the EN 1078 impact test for bicycle helmets using a realistic subject-specific finite element head model pp. 684-692

Michael Sandberg, Kwong Ming Tse, Long Bin Tan and Heow Pueh Lee

Volume 21, issue 11, 2018

The Biomechanical Effects of Sagittal Split Ramus Osteotomy on Temporomandibular Joint pp. 617-624

Zhan Liu, Jingheng Shu, Yuanli Zhang and Yubo Fan

A versatile approach to determine instantaneous co-activation: Development, implementation and comparison to existing measures pp. 625-634

Daniel Viggiani, Jeff M Barrett, Kayla M Fewster and Jack Callaghan

Effect of the anisotropic permeability in the frequency dependent properties of the superficial layer of articular cartilage pp. 635-644

D. Gastaldi, M. Taffetani, R. Raiteri and P. Vena

Gait variability analysis through phase portrait estimated from the Hilbert transform pp. 645-653

Gustavo Souto de Sá e Souza, Adriano O. Andrade and Marcus Fraga Vieira

Volume 21, issue 10, 2018

Patient-specific guides improve hip arthroplasty surgical accuracy pp. 579-584

Adeel Aqil, Sanya Patel, Anatole Wiik, Gareth Jones, Alex Bridle and Justin P. Cobb

Estimation of mechanical power and energy cost in elite wheelchair racing by analytical procedures and numerical simulations pp. 585-592

Pedro Forte, Daniel A. Marinho, Jorge E. Morais, Pedro G. Morouço and Tiago M. Barbosa

Effectiveness and recovery action of a perturbation balance test – a comparison of single-leg and bipedal stances pp. 593-600

Bálint Petró, Judit T Nagy and Rita M Kiss

Analysis of the influence of modelling assumptions on the prediction of the elastic properties of cardiac fibres pp. 601-615

Jacobo Córdova Aquino and Hugo I. Medellín-Castillo

Volume 21, issue 9, 2018

Numerical studies of the influence of various geometrical features of a multispiked connecting scaffold prototype on mechanical stresses in peri-implant bone pp. 541-547

Ryszard Uklejewski, Mariusz Winiecki, Adam Patalas and Piotr Rogala

A musculoskeletal model of the hand and wrist: model definition and evaluation pp. 548-557

M. Mirakhorlo, N. Van Beek, M. Wesseling, H. Maas, H. E. J. Veeger and I. Jonkers

Hemodynamic simulation of intracranial aneurysm growth with virtual silk stent implantation pp. 558-567

Xiao Mo, Qianqian Meng, Xiangyu Ma, Qianqian Zhang, Hongyu Yu, Bin Jing, Han Liu, Qi Yan, Zhizheng Zhuo, Xinjian Yang and Haiyun Li

Statistical shape model-based prediction of tibiofemoral cartilage pp. 568-578

Christophe Van Dijck, Roel Wirix-Speetjens, Ilse Jonkers and Jos Vander Sloten

Volume 21, issue 8, 2018

Numerical model proposed for a temporomandibular joint prosthesis based on the recovery of the healthy movement pp. 503-511

Henrique Takashi Idogava, Pedro Yoshito Noritomi and Gregory Bregion Daniel

Modelling the fracture-healing process as a moving-interface problem using an interface-capturing approach pp. 512-520

M. Pietsch, F. Niemeyer, U. Simon, A. Ignatius and K. Urban

A metabolic energy expenditure model with a continuous first derivative and its application to predictive simulations of gait pp. 521-531

Anne D. Koelewijn, Eva Dorschky and Antonie J. van den Bogert

Numerical analysis and comparison of flow fields in normal larynx and larynx with unilateral vocal fold paralysis pp. 532-540

Amirhossein Bagheri Sarvestani, Ebrahim Goshtasbi Rad and Kamyar Iravani

Volume 21, issue 7, 2018

Foot internal stress distribution during impact in barefoot running as function of the strike pattern pp. 471-478

Enrique Morales-Orcajo, Ricardo Becerro de Bengoa Vallejo, Marta Losa Iglesias, Javier Bayod and Estevam Barbosa de Las Casas

Pulsatile flow through a constricted tube: effect of stenosis morphology on hemodynamic parameters pp. 479-487

Panagiotis Kelidis and Efstathios Konstantinidis

Does the angulation of the mandibular third molar influence the fragility of the mandibular angle after trauma to the mandibular body? A three-dimensional finite-element study pp. 488-497

Yeliz Kılınç, Zeynep Fatma Zor, Mehmet Kemal Tümer, Erkan Erkmen and Ahmet Kurt

Point-cloud registration using adaptive radial basis functions pp. 498-502

Ju Zhang, David Ackland and Justin Fernandez

Volume 21, issue 6, 2018

Optimal pressure comfort design for pilot helmets pp. 437-443

Ying Xu, Lian Yun Chen, Hai Bo Zhang, Xin Zhao, Yin Sheng Tian and Li Ding

FEBio finite element models of the human lumbar spine pp. 444-452

Sean M. Finley, Darrel S. Brodke, Nicholas T. Spina, Christine A. DeDen and Benjamin J. Ellis

A novel computational method to determine subject-specific bite force and occlusal loading during mastication pp. 453-460

Oliver Röhrle, Harnoor Saini, Peter V. S. Lee and David C. Ackland

A computational framework to simulate the endolymph flow due to vestibular rehabilitation maneuvers assessed from accelerometer data pp. 461-469

Carla F. Santos, Jorge Belinha, Fernanda Gentil, Marco Parente, Bruno Areias and Renato Natal Jorge

Volume 21, issue 5, 2018

Corrugated diaphragm shape design study for hemocompatible pulsatile ventricular assist devices pp. 399-407

C. Loosli, L. Moy, G. Kress, E. Mazza and P. Ermanni

Subject specific finite element mesh generation of the pelvis from biplanar x-ray images: application to 120 clinical cases pp. 408-412

Nolwenn Fougeron, Pierre-Yves Rohan, Aurélien Macron, Christophe Travert, Hélène Pillet and Wafa Skalli

A two-step procedure for coupling development and usage of a pair of human neck models pp. 413-426

Y. W. Wang, L. Z. Wang, S. Y. Liu and Y. B. Fan

Computational biomechanical analysis of postoperative inferior tibiofibular syndesmosis: a modified modeling method pp. 427-435

Haobo Li, Yanxi Chen, Minfei Qiang, Kun Zhang, Yuchen Jiang, Yijie Zhang and Xiaoyang Jia

Volume 21, issue 4, 2018

Morphing the feature-based multi-blocks of normative/healthy vertebral geometries to scoliosis vertebral geometries: development of personalized finite element models pp. 297-324

Prasannaah Hadagali, James R. Peters and Sriram Balasubramanian

Changes of human movement complexity during maturation: quantitative assessment using multiscale entropy pp. 325-331

M. C. Bisi and R. Stagni

Towards patient-specific medializing calcaneal osteotomy for adult flatfoot: a finite element study pp. 332-343

Zhongkui Wang, Masamitsu Kido, Kan Imai, Kazuya Ikoma and Shinichi Hirai

Altered lower extremity joint mechanics occur during the star excursion balance test and single leg hop after ACL-reconstruction in a collegiate athlete pp. 344-358

Michael A. Samaan, Stacie I. Ringleb, Sebastian Y. Bawab, Eric K. Greska and Joshua T. Weinhandl

Numerical investigation of bone remodelling around immediately loaded dental implants using sika deer (Cervus nippon) antlers as implant bed pp. 359-369

Yun He, Istabrak Hasan, Ludger Keilig, Dominik Fischer, Luisa Ziegler, Marcus Abboud, Gerhard Wahl and Christoph Bourauel

An innovative appendage invagination procedure to reduce thrombus formation – a numerical model pp. 370-378

Ori Hazan, Leonid Sternik, Dar Waiss, Michael Eldar, Oshrit Hoffer, Orly Goitein, Rafael Kuperstein, Eli Konen and Zehava Ovadia-Blechman

Finite element models of the thigh-buttock complex for assessing static sitting discomfort and pressure sore risk: a literature review pp. 379-388

Léo Savonnet, Xuguang Wang and Sonia Duprey

1D simulation of blood flow characteristics in the circle of Willis using THINkS pp. 389-397

George P. Huang, Hongtao Yu, Zifeng Yang, Ryan Schwieterman and Bryan Ludwig

Volume 21, issue 3, 2018

Corrigendum pp. (i)-(i)

The Editors

The effect of Knee-Ankle-Foot orthosis stiffness on the parameters of walking pp. 201-207

Sayed Mohammad Ali Abtahi, Nima Jamshidi and Aram Ghaziasgar

Simulating localised cellular inflammation and substrate properties in a strain energy density based bone remodelling algorithm for use in modelling trauma pp. 208-218

Naomi Rosenberg and Anthony M. J. Bull

Fluid-structure interaction modeling of aneurysmal arteries under steady-state and pulsatile blood flow: a stability analysis pp. 219-231

Mohammadali Sharzehee, Seyed Saeid Khalafvand and Hai-Chao Han

Predicting the cardiac toxicity of drugs using a novel multiscale exposure–response simulator pp. 232-246

Francisco Sahli Costabal, Jiang Yao and Ellen Kuhl

Biomechanical analysis of lumbar interbody fusion cages with various lordotic angles: a finite element study pp. 247-254

Zhenjun Zhang, Guy R. Fogel, Zhenhua Liao, Yitao Sun and Weiqiang Liu

Patient-specific CT-based 3D passive FSI model for left ventricle in hypertrophic obstructive cardiomyopathy pp. 255-263

Long Deng, Xueying Huang, Chun Yang, Yunhu Song and Dalin Tang

Brain tissue analysis of impacts to American football helmets pp. 264-277

Andrew Post, Marshall Kendall, Janie Cournoyer, Clara Karton, R. Anna Oeur, Lauren Dawson and T. Blaine Hoshizaki

Does the graft-tunnel friction influence knee joint kinematics and biomechanics after anterior cruciate ligament reconstruction? A finite element study pp. 278-286

Chao Wan and Zhixiu Hao

Sensitivity of corneal biomechanical and optical behavior to material parameters using design of experiments method pp. 287-296

Mengchen Xu, Amy L. Lerner, Paul D. Funkenbusch, Ashutosh Richhariya and Geunyoung Yoon

Volume 21, issue 2, 2018

The influence of fiber dispersion on the mechanical response of aortic tissues in health and disease: a computational study pp. 99-112

Justyna A. Niestrawska, Daniel Ch. Haspinger and Gerhard A. Holzapfel

Sub-millimetre accurate human hand kinematics: from surface to skeleton pp. 113-128

Jumana Ma’touq, Tingli Hu and Sami Haddadin

A novel adaptive algorithm for 3D finite element analysis to model extracortical bone growth pp. 129-138

Vee San Cheong, Gordon W. Blunn, Melanie J. Coathup and Paul Fromme

Model reduction methodology for computational simulations of endovascular repair pp. 139-148

V. A. Acosta Santamaría, G. Daniel, D. Perrin, J. N. Albertini, E. Rosset and S. Avril

The MusIC method: a fast and quasi-optimal solution to the muscle forces estimation problem pp. 149-160

A. Muller, C. Pontonnier and G. Dumont

The use of functionally graded dental crowns to improve biocompatibility: a finite element analysis pp. 161-168

Mojtaba Mahmoudi, Ali Reza Saidi, Maryam Alsadat Hashemipour and Parviz Amini

Assessment of cortical bone fracture resistance curves by fusing artificial neural networks and linear regression pp. 169-176

Arso M. Vukicevic, Gordana R. Jovicic, Milos N. Jovicic, Vladimir L. Milicevic and Nenad D. Filipovic

A three-dimensional topology optimization model for tooth-root morphology pp. 177-185

K.-F. Seitz, J. Grabe and T. Köhne

Error reduction in the finite helical axis for knee kinematics pp. 186-193

Emily L. Bishop, Jessica C. Küpper, Ingrid R. Fjeld, Gregor Kuntze and Janet L. Ronsky

The potential role of variations in juvenile hip geometry on the development of Legg-Calvé-Perthes disease: a biomechanical investigation pp. 194-200

Manuel da Silva Pinheiro, Catherine Dobson, Nicholas M. Clarke and Michael Fagan

Volume 21, issue 1, 2018

Numerical identification of the rupture locations in patient-specific abdominal aortic aneurysmsusing hemodynamic parameters pp. 1-12

Yue Qiu, Ding Yuan, Jun Wen, Yubo Fan and Tinghui Zheng

Contribution to FE modeling for intraoperative pedicle screw strength prediction pp. 13-21

Maxim Van den Abbeele, Jean-Marc Valiadis, Lucas V. P. C. Lima, Pascal Khalifé, Philippe Rouch and Wafa Skalli

A two-dimensional numerical study of peristaltic contractions in obstructed ureter flows pp. 22-32

Z. Najafi, B. F. Schwartz, A. J. Chandy and A. M. Mahajan

A finite element model of myocardial infarction using a composite material approach pp. 33-46

Seyyed M. H. Haddad and Abbas Samani

Path planning for minimally-invasive knee surgery using a hybrid optimization procedure pp. 47-54

Adam Ciszkiewicz and Grzegorz Milewski

New method for estimating arterial pulse wave velocity at single site pp. 55-64

Khaled Ben Abdessalem, Patrice Flaud and Samir Zobaidi

Optimization of three-dimensional modeling for geometric precision and efficiency for healthy and diseased aortas pp. 65-74

Christopher P. Cheng, Yufei D. Zhu and Ga-Young Suh

Cross-bridge mechanism of residual force enhancement after stretching in a skeletal muscle pp. 75-82

Youjiro Tamura

Using 3D finite element models verified the importance of callus material and microstructure in biomechanics restoration during bone defect repair pp. 83-90

Chentian Li, Rongwei Tan, Yuanjun Guo and Songjian Li

Influence of transmucosal height in abutments of single and multiple implant-supported prostheses: a non-linear three-dimensional finite element analysis pp. 91-97

Eduardo Borie, Eduardo Leal, Iara Augusta Orsi, Carlos Salamanca, Fernando José Dias and Benjamin Weber