Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 26, issue S1, 2023

ABSTRACTS 48th Congress of the Society of Biomechanics pp. S1-S341

Yohan Payan and Lucie Bailly

Volume 26, issue 16, 2023

Biomechanical response of lumbar intervertebral disc in daily sitting postures: a poroelastic finite element analysis pp. 1941-1950

Liang-dong Zheng, Yu-ting Cao, Yi-ting Yang, Meng-lei Xu, Hui-zi Zeng, Shi-jie Zhu, Antonio Candito, Yuhang Chen, Rui Zhu and Li-ming Cheng

Identification of cancer types from gene expressions using learning techniques pp. 1951-1965

Swati B. Bhonde, Sharmila K. Wagh and Jayashree R. Prasad

Effect of hip flexion angle on lower limb injuries of occupants in autonomous vehicle crashes pp. 1966-1979

Tengfei Tian, Sen Xiao, Siqi You, Hao Zhang, Lidong Zhang and Fuhao Mo

A novel model based on a 1D-ResCNN and transfer learning for processing EEG attenuation pp. 1980-1993

Wenlong Wang and Baojiang Li

Relationship between mechanical and microstructural parameters of rat lumbar spine in different ages pp. 1994-2007

Xiaorong Hu and He Gong

Comparison of constitutive models for meniscus and their effect on the knee joint biomechanics during gait pp. 2008-2021

Tulashi Simkheada, Gustavo A. Orozco, Rami K. Korhonen, Petri Tanska and Mika E. Mononen

Study on chest injury and bulletproof vest protection under the combined action of blast wave and fragments pp. 2022-2033

Zhihua Cai, Zhi Wang, Lijun Chang, Xingyuan Huang and Hui Zhao

Numerical simulation and in vitro experimental study of thrombus capture efficiency of a new retrievable vena cava filter pp. 2034-2046

Haiquan Feng, Changsheng Li and Haoxiang Feng

Study of fatigue damage to the cochlea pp. 2047-2056

Lei Gao, Jiakun Wang, Junyi Liang, Wenjuan Yao, Lei Zhou and Xinsheng Huang

Random forest-based simultaneous and proportional myoelectric control system for finger movements pp. 2057-2069

Khairul Anam, Dwiretno Istiyadi Swasono, Agus Triono, Aris Z. Muttaqin and Faruq S. Hanggara

Hybrid optimized feature selection and deep learning based COVID-19 disease prediction pp. 2070-2088

S. John Joseph and R. Gandhi Raj

Volume 26, issue 15, 2023

Numerical performances through artificial neural networks for solving the vector-borne disease with lifelong immunity pp. 1785-1795

Ayse Nur Akkilic, Zulqurnain Sabir, Muhammad Asif Zahoor Raja, Hasan Bulut, R. Sadat and Mohamed R. Ali

Robust stability control for nonlinear time varying delay fractional order practical systems and application in Glucose-Insulin system pp. 1796-1805

Gholamreza Alikhani and Saeed Balochian

Biomechanical analysis of a lacunar-canalicular system under different cyclic displacement loading pp. 1806-1821

Yan Wang, Hao Dong, Yang Yan, Jianhao Yu, Xiaogang Wu, Yanqin Wang, Yanru Xue, Xiyu Wang, Xiaochun Wei, Pengcui Li and Weiyi Chen

Development and validation of risk of bias tool for the use of finite element analysis in dentistry (ROBFEAD) pp. 1822-1833

Vijay Prakash Mathur, Isha Duggal, Mohammad Atif, Nitesh Tewari, Morankar Rahul, Ritu Duggal and Anoop Chawla

Weighted entropy deep features on hybrid RNN with LSTM for glucose level and diabetes prediction pp. 1834-1858

Somasundaram Naveena and Ayyasamy Bharathi

Effect of laryngeal jet on dry powder inhaler aerosol deposition: a numerical simulation pp. 1859-1874

Arash Babamiri, Kaveh Ahookhosh, Haniye Abdollahi, Mohammad Hasan Taheri, Xinguang Cui, Malikeh Nabaei and Ali Farnoud

Occupational health knowledge discovery based on association rules applied to workers’ body parts protection: a case study in the automotive industry pp. 1875-1888

Nafiseh Mollaei, Carlos Fujao, Joao Rodrigues, Catia Cepeda and Hugo Gamboa

BeO nanotube as a promising material for anticancer drugs delivery system pp. 1889-1897

Mustafa M. Kadhim, S. Alomar, Safa K. Hachim, Sallalh Ahmed Abdullaha, Taleeb Zedan Taban and N. Alnasoud

Proposed association rule hiding based privacy preservation model with block chain technology for IoT healthcare sector pp. 1898-1915

A. Yogeshwar and S. Kamalakkannan

Study of tractor side tilt operation on intervertebral disc injury between L4 and L5 in drivers pp. 1916-1929

Yang Yang, Jinghui Liu, Jian Qi, Yaping Wang, Liangyuan Xu, Yizhuo Zhang and Liqing Cheng

A 3D finite element model of uterus support to evaluate mechanisms underlying uterine prolapse formation pp. 1930-1939

Jialan Chen, Junfeng Zhang and Cuige Yu

Volume 26, issue 14, 2023

Biomechanical effect of intervertebral disc degeneration on the lower lumbar spine pp. 1669-1677

Hongkun Wang, Nan Li, Huiwen Huang, Peng Xu and Yubo Fan

Polynomial chaos expansion based sensitivity analysis of predicted knee reactions—assessing the influence of the primary ligaments in distraction based models pp. 1678-1690

Mhd Ammar Hafez and Jason P. Halloran

Knee joint prototype based on cam mechanism – design and video analysis pp. 1691-1701

Michał Olinski

Imbalanced medical disease dataset classification using enhanced generative adversarial network pp. 1702-1718

T. Suresh, Z. Brijet and T. D. Subha

An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration pp. 1719-1731

Matthew R. Potts, Sam L. Evans, Rhys Pullin, Sion A. Coulman, James C. Birchall and Hayley Wyatt

Biomechanical comparison of the effect of bilateral sagittal split ramus osteotomy with or without Le Fort I osteotomy on the temporomandibular joints of the patients with maxillofacial deformities under centric occlusion pp. 1732-1741

Yukai Feng, Haidong Teng, Jingheng Shu, Bingmei Shao, Desmond Y. R. Chong and Zhan Liu

The relative influence of model parameters on finite element analysis simulations of intervertebral body fusion device static compression performance pp. 1742-1751

Andrew P. Baumann, Meng-Ting Hsieh, Anton E. Dmitriev and Jeffrey C. Lotz

Analytical study for prediction of stress distribution on orthodontic archwire considering short-term stress loss pp. 1752-1760

Yeonju Chun, Yeokyeong Lee, Hyunju Lee, Minji Kim and Heesun Kim

Numerical analysis of streaming potential induced by loads in micro-pores of articular cartilage pp. 1761-1771

Yutao Men, Yucheng Ren, Zhonghai Zhao, Xin Wang and Lu Liu

EEG-based emotion recognition using dual tree complex wavelet transform and random subspace ensemble classifier pp. 1772-1784

Emrah Hancer and Abdulhamit Subasi

Volume 26, issue 13, 2023

Autonomous aspirating robot for removing saliva blood mixed liquid in oral surgery pp. 1523-1531

Baiquan Su, Han Li, Wei Xiu, Yang Gao, Yi Gong, Zehao Wang, Yida David Hu, Wei Yao, Jie Tang, Wenyong Liu, Junchen Wang and Li Gao

CardioSim: a PC-based cardiac signal simulator using segmental modeling of electrocardiogram pp. 1532-1548

Anumita Mitra, Palash Kumar Kundu, Rajarshi Gupta, Jayanta Saha and Arunansu Talukdar

Development of a more biofidelic musculoskeletal model with humeral head translation and glenohumeral ligaments pp. 1549-1556

Sujata Khandare and Meghan E. Vidt

Statistical shape representation of the thoracic aorta: accounting for major branches of the aortic arch pp. 1557-1571

Hadi Wiputra, Shion Matsumoto, Jessica E. Wagenseil, Alan C. Braverman, Rochus K. Voeller and Victor H. Barocas

The effect of the properties of cell nucleus and underlying substrate on the response of finite element models of astrocytes undergoing mechanical stimulations pp. 1572-1581

Fatemeh Atashgar, Mehdi Shafieian and Nabiollah Abolfathi

Computation of the mitochondrial age distribution along the axon length pp. 1582-1594

Ivan A. Kuznetsov and Andrey V. Kuznetsov

Carotid hemodynamic response to external pressure and comparison with induced-stenosis progression: a fluid-structure interaction study pp. 1595-1609

Kshitij Shakya, Dalchand Ahirwar, P. M. Nabeel and Shubhajit Roy Chowdhury

Topology optimization and dynamic characteristic evaluation of W-shaped interspinous process device pp. 1610-1619

Li-Xin Guo and Juan Liu

Effect of collision, size, and oscillation of RBCs on blood heat transfer in a bifurcated vessel pp. 1620-1634

Sidharth Sankar Das and Swarup Kumar Mahapatra

4D dynamic system for visual-motor integration analysis pp. 1635-1652

Yejin Wee and Onseok Lee

Detection of Parkinson’s disease with keystroke data pp. 1653-1667

Bahar Demir, Sezer Ulukaya and Oğuzhan Erdem

Volume 26, issue 12, 2023

Finite element analysis and optimization of microneedle arrays for transdermal vaccine delivery: comparison of coated and dissolving microneedles pp. 1379-1387

Noppamas Yolai, Pikkanet Suttirat, Jeerapond Leelawattanachai, Chaiwoot Boonyasiriwat and Charin Modchang

A mathematical model to study thermoregulation and heat-transfer processes in hypothermic neonates under variable physiological parameters pp. 1388-1399

Saqib Mubarak and M. A. Khanday

Classifier for the functional state of the respiratory system via descriptors determined by using multimodal technology pp. 1400-1418

Sergey Alekseevich Filist, Riad Taha Al-kasasbeh, Olga Vladimirovna Shatalova, Altyn Amanzholovna Aikeyeva, Osama M. Al-Habahbeh, Mahdi Salman Alshamasin, Korenevskiy Nikolay Alekseevich, Mohammad Khrisat, Maksim Borisovich Myasnyankin and Maksim Ilyash

Multi-scale numerical simulation on mechano-transduction of osteocytes in different gravity fields pp. 1419-1430

Chaohui Zhao, Haiying Liu, Congbiao Tian, Chunqiu Zhang and Wei Wang

Dual-zone material assignment method for correcting partial volume effects in image-based bone models pp. 1431-1442

Brendan Inglis, Daniel Grumbles and Hannah L. Dailey

Biomechanical framework for the inverse dynamic analysis of swimming using hydrodynamic forces from swumsuit pp. 1443-1451

M. Sequeira, F. Simões, C. Quental, J. Ambrósio, P. Fonseca, J. P. Vilas-Boas and M. Nakashima

The influencing mechanism of iliac vein stent implantation for hemodynamics at the bifurcation pp. 1452-1461

Changsheng Li, Haiquan Feng, Xiaotian Wang and Yonggang Wang

Airflow through the supraglottis during inspiration pp. 1462-1477

L. Reid, M. Hayatdavoodi and S. Majumdar

Comparison of the effectiveness of rotating seats in autonomous vehicles and airbags in traditional vehicles to minimize head injuries in frontal crash pp. 1478-1488

Na Yang, Jiexiong Wang and Tao Liu

Body activity grading strategy for cervical rehabilitation training pp. 1489-1498

Liang Dong and Yun Qu

Comparative evaluation of short or standard implants with different prosthetic designs in the posterior mandibular region: a three-dimensional finite element analysis study pp. 1499-1509

Siqi Qin and Zhi Gao

Effects of different helmet-mounted devices on pilot’s neck injury under simulated ejection pp. 1510-1521

Jinglong Liu, Heqing Liu, Weiping Bu, Yawei Wang, Peng Xu, Minglei Wu and Yubo Fan

Volume 26, issue 11, 2023

Driver drowsiness detection methods using EEG signals: a systematic review pp. 1237-1249

Raed Mohammed Hussein, Firas Sabar Miften and Loay E. George

Dynamics of a delayed stochastic epidemic model with double epidemic hypothesis and saturated incidence pp. 1250-1271

Hengqian Li and Xiurong Guo

Numerical simulation of the fractional Maxwell fluid flow in locally narrow artery pp. 1272-1287

Yan Zhang, Jun Gao, Yu Bai, Qiao Wang, Dezhou Sun, Xiaopeng Sun and Bingbo Lv

Comparison of morphing techniques to develop subject-specific finite element models of vertebrae pp. 1288-1293

Rafael I. Rubenstein, Mitesh Lalwala, Karan Devane, Bharath Koya, Bahram Kiani and Ashley A. Weaver

Modeling the transmission phenomena of water-borne disease with non-singular and non-local kernel pp. 1294-1307

Wejdan Deebani, Rashid Jan, Zahir Shah, Narcisa Vrinceanu and Mihaela Racheriu

Stress-dependent design and optimization methodology of gradient porous implant and application in femoral stem pp. 1308-1319

Changning Sun, Jianfeng Kang, Ling Wang, Zhongmin Jin, Chaozong Liu and Dichen Li

Central arterial pressure and patient-specific model parameter estimation based on radial pressure measurements pp. 1320-1329

Dániel Gyürki, Tamás Horváth, Sára Till, Attila Egri, Csilla Celeng, György Paál, Béla Merkely, Pál Maurovich-Horvat and Gábor Halász

A comparison of intervertebral ligament properties utilized in a thoracic spine functional unit through kinematic evaluation pp. 1330-1340

Michael Polanco, Stacie Ringleb, Michel Audette, Rumit Kakar and Sebastian Bawab

A preliminary study in classification of the severity of spine deformation in adolescents with lumbar/thoracolumbar idiopathic scoliosis using machine learning algorithms based on lumbosacral joint efforts during gait pp. 1341-1352

Bahare Samadi, Maxime Raison, Philippe Mahaudens, Christine Detrembleur and Sofiane Achiche

A novel knee joint model in FEBio with inhomogeneous fibril-reinforced biphasic cartilage simulating tissue mechanical responses during gait: data from the osteoarthritis initiative pp. 1353-1367

Alexander Paz, Gustavo A. Orozco, Petri Tanska, José J. García, Rami K. Korhonen and Mika E. Mononen

Computational modeling of stretch induced calcium signaling at the apical membrane domain in umbrella cells pp. 1368-1377

Amritanshu Gupta and Rohit Manchanda

Volume 26, issue 10, 2023

A method of classification decision based on multi-BiLSTMs for physical loads hierarchy pp. 1101-1113

Yu Wang, Chengyu Zhang, Yuxuan Zhao, Yibing Liao, Yifan Gao and Jianbin Zheng

Mathematical modeling of corona virus (COVID-19) and stability analysis pp. 1114-1133

Zain Ul Abadin Zafar, Nigar Ali, Mustafa Inc, Zahir Shah and Samina Younas

Bone tissue growth in ultrasonically stimulated bioinspired scaffolds pp. 1134-1139

Marco Fielder and Arun K. Nair

Bovine pericardium leaflet damage during transcatheter aortic valve crimping: a study of the mechanisms pp. 1140-1149

Wentao Feng, Xianda Yang, Jie Yao, Chenglong Feng, Lizhen Wang and Yubo Fan

Predicting the effective compressive modulus of human cancellous bone using the convolutional neural network method pp. 1150-1159

Yongtao Lu, Zhuoyue Yang, Hanxing Zhu and Chengwei Wu

Modelling and simulation of fluid flow through stenosis and aneurysm blood vessel: a computational hemodynamic analysis pp. 1160-1182

J. V. Ramana Reddy, Hojin Ha and S. Sundar

A novel hybrid approach for feature selection enhancement: COVID-19 case study pp. 1183-1197

Hela Limam, Oumaima Hasni and Ines Ben Alaya

Selection methodology of femoral stems under fatigue loading conditions pp. 1198-1207

Iván López, Julián Echeverry-Mejía, Juan Guillermo Ortiz and Mario Juha

Methodology to geometrically age human body models to average and subject-specific anthropometrics, demonstrated using a small stature female model assessed in a side impact pp. 1208-1219

M. A. Corrales, J. Bolte, S. Malcolm, B. Pipkorn and D. S. Cronin

Cardiac arrest prediction in smokers using enhanced Artificial Bee Colony algorithm with stacked autoencoder model pp. 1220-1235

Umera Banu and Dr. Kalpana Vanjerkhede

Volume 26, issue 9, 2023

Development of an additively-manufactured functionally-graded expandable implant via the application of the adaptive response surface method: feasibility study on intramedullary humerus nail pp. 999-1007

Aleš Hrouda, Petr Obruba, Lukas Capek, Jiri Safka, Veronika Truxova and Stefan Rammelt

A novel sEMG data augmentation based on WGAN-GP pp. 1008-1017

Fabrício Coelho, Milena F. Pinto, Aurélio G. Melo, Gabryel S. Ramos and André L. M. Marcato

Modeling and numerical analysis of fractional order hepatitis B virus model with harmonic mean type incidence rate pp. 1018-1033

Rahat Zarin

Baroreflex control model for cardiovascular system subjected to postural changes under normal and orthostatic conditions pp. 1034-1043

V. L. Resmi, R. G. Sriya and N. Selvaganesan

Enhanced assessment of human dynamic stability by eliminating the effect of body height: modeling and experiment study pp. 1044-1054

Shengqian Xu, Zhihao Yang, Daoyuan Wang, Shengyu Zhang, Jianwei Lu, Jian Lin and Gangmin Ning

OpenColab project: OpenSim in Google colaboratory to explore biomechanics on the web pp. 1055-1063

Hossein Mokhtarzadeh, Fangwei Jiang, Shengzhe Zhao and Fatemeh Malekipour

An approach for simultaneous reduction and fixation of mandibular fractures pp. 1064-1076

Ethan Snyder, Mohamed Trabia and Nir Trabelsi

A fluid-structure interaction investigation of intra-articular pressure and ligament in wrist joint pp. 1077-1085

Joachim Ee En Ong, Shi Lei Teng, Duncan Angus McGrouther, Hwa Liang Leo and Yoke Rung Wong

Impact of Levy noise on a stochastic Norovirus epidemic model with information intervention pp. 1086-1099

Ting Cui, Anwarud Din, Peijiang Liu and Amir Khan

Volume 26, issue 8, 2023

Finite element simulation of multilayer model to simulate fine needle insertion mechanism into iliac crest for bone marrow biopsy pp. 877-892

Rahul Nadda, Ramjee Repaka and Ashish Kumar Sahani

Stiffness estimation of transversely anisotropic materials using a novel indentation tester with a rectangular hole pp. 893-904

Atsutaka Tamura, Mika Saiki, Jun-ichi Hongu and Takeo Matsumoto

Finite element analysis of bone mechanical properties using MRI-derived bound and pore water concentration maps pp. 905-916

Thammathida Ketsiri, Sasidhar Uppuganti, Kevin D. Harkins, Daniel F. Gochberg, Jeffry S. Nyman and Mark D. Does

Quantifying osteosynthesis plate prominence – mathematical definitions and case study on a clavicle plate pp. 917-926

Martin Zenker, Evangelos Theodorou, Daniel Andermatt, Ralf Winkler, Harry A. Hoyen, Martin Jaeger, Chunyan Jiang, Simon Lambert, Stefaan Nijs and Arabella D. Fontana

Pulsatile flow of thixotropic blood in artery under external body acceleration pp. 927-940

Louiza Cheffar, Abdelhakim Benslimane, Djamel Sadaoui, Adel Benchabane and Karim Bekkour

Intrinsic factors contributing to elevated intra-abdominal pressure pp. 941-951

Stefan Niederauer, Grace Hunt, K. Bo Foreman, Andrew Merryweather and Robert Hitchcock

Investigation of changing geometry parameters of nickel-titanium shape memory alloys wire stent in cardiovascular implants pp. 952-959

Mansour Alizadeh, Atefeh Aghajani Koopaie and Saber Shakeri Jousheghan

Effect of seat tilting on biomechanics of L4 in tractor drivers pp. 960-971

Yang Yang, Jian Qi, Jinghui Liu, Yaping Wang, Liangyuan Xu, Yizhuo Zhang and Liqing Cheng

A subject-specific musculoskeletal model to predict the tibiofemoral contact forces during daily living activities pp. 972-985

Li Zhang, Geng Liu, Yuzhou Yan, Bing Han, Hui Li, Jianbing Ma and Xupeng Wang

Numerical investigation of different viscosity models on pulsatile blood flow of thoracic aortic aneurysm (TAA) in a patient-specific model pp. 986-998

Amir Faraji, Mahdi Sahebi and Sadjad SalavatiDezfouli

Volume 26, issue 7, 2023

Wavefront aberrations caused by biomechanical effects after Small Incision Lenticule Extraction (SMILE) based on finite element analysis pp. 755-763

Yinyu Song, Lihua Fang, Qianwei Liu, Jiahui Gong and Binhui Guo

Conformity assessment with structural strength requirements of mechanical polycentric prosthetic knee used for amputee rehabilitation pp. 764-776

Rajesh Kumar Mohanty, R C Mohanty, Sukanta Sabut and Mukundjee Pandey

The impact of intrinsic muscle properties on simulated reaching performance pp. 777-788

Tiina Murtola and Christopher Richards

Material parameters identification of 3D printed titanium alloy prosthesis stem based on response surface method pp. 789-798

Yutao Men, Jiaxin Liu, Wei Chen, Xin Wang, Lu Liu, Jinduo Ye, Peng Jia and Yeming Wang

Biomechanical effect of posterior ligament repair in lamina repair surgery pp. 799-806

Kaixiang Jin, Yuanjun Zhu, Nan Li, Yinghui Li, Yan Yao, Zhongjun Mo and Yubo Fan

Internal flow field analysis of heterogeneous porous scaffold for bone tissue engineering pp. 807-819

Xiaokang Wang, Jigang Chen, Yabin Guan, Li Sun and Yongxing Kang

Biomechanical effect of C5-C6 intervertebral disc degeneration on the human lower cervical spine (C3-C7): a finite element study pp. 820-834

Waseem Ur Rahman, Wei Jiang, Fulin Zhao, Zhijun Li, Guohua Wang and Guanghui Yang

Movement posture and injury pattern of pelvis-lumbar spine of seated human impacted by the vertical high loads: a finite element analysis pp. 835-845

Yongbo Jiang, Xun Xiong, Zihao Chen and Ying Li

Finite element analysis of necessity of reduction and selection of internal fixation for valgus-impacted femoral neck fracture pp. 846-853

Yahui Dai, Ming Ni, Bang Dou, Zhiyuan Wang, Yushan Zhang, Xueliang Cui, Wenqian Ma, Tao Qin, Xiaobin Xu and Jiong Mei

An investigation of cerebral bridging veins rupture due to head trauma pp. 854-863

Hamed Abdi, Kamran Hassani and Shahrokh Shojaei

A penalty method for constrained multibody kinematics optimisation using a Levenberg–Marquardt algorithm pp. 864-875

Claire Livet, Théo Rouvier, Christophe Sauret, Hélène Pillet, Georges Dumont and Charles Pontonnier

Volume 26, issue 6, 2023

A computational design of experiments based method for evaluation of off-the-shelf total knee replacement implants pp. 629-638

Thomas A. Burge, Jonathan R. T. Jeffers and Connor W. Myant

Ontology-Based decision tree model for prediction of fatty liver diseases pp. 639-649

Seyed Yashar Banihashem and Saman Shishehchi

Porous interbody fusion cage design via topology optimization and biomechanical performance analysis pp. 650-659

Nan Li, Yang Zhang, Qiaohong Tang, Hongkun Wang, Da He, Yan Yao and Yubo Fan

A position- and time-dependent pressure profile to model viscoelastic mechanical behavior of the brain tissue due to tumor growth pp. 660-672

Fatemeh Abdolkarimzadeh, Mohammad Reza Ashory, Ahmad Ghasemi-Ghalebahman and Alireza Karimi

Modeling the therapy system of noninvasive pressure support ventilation with the respiratory patient in COPD and ARDS pp. 673-679

Yueyang Yuan, Lixin Xie, Wei Liu and Zheng Dai

The pulsatile 3D-Hemodynamics in a doubly afflicted human descending abdominal artery with iliac branching pp. 680-699

Sumit Kumar, S. K. Rai, B.V. Rathish Kumar and Om Shankar

Interaction of rod decussation and crack growth in enamel pp. 700-709

Siyong Liu, Yuanzhi Xu, Bingbing An and Dongsheng Zhang

Prediction of abrasive wears behavior of dental composites using an artificial neural network pp. 710-720

Abhijeet Shivaji Suryawanshi and Niranjana Behera

Study of heat sink effect of blood in a bifurcated vessel pp. 721-733

Sidharth Sankar Das and Swarup Kumar Mahapatra

Study on circumpelvic muscle deformation and dynamic simulation of pelvic fracture reduction pp. 734-743

Jingtao Lei, Yanan Li and Haifei Xu

Changes of adjacent segment biomechanics after anterior cervical interbody fusion with different profile design plate: single- versus double-level pp. 744-753

Lin-Yu Jin, Ke Wei, Da-Ming Feng, Jian-Dong Li, Xiao-Xing Song, Hong-Ling Yin and Xin-Feng Li

Volume 26, issue 5, 2023

Modeling of the PHEMA-gelatin scaffold enriched with graphene oxide utilizing finite element method for bone tissue engineering pp. 499-507

Sara Tabatabaee, Mehran Hatami, Hossein Mostajeran and Nafiseh Baheiraei

Biomechanical structure–function relations for human trabecular bone — comparison of calcaneus, femoral neck, greater trochanter, proximal tibia, and vertebra pp. 508-516

Saghi Sadoughi, Grant Bevill, Elise F. Morgan, Vivek Palepu, Tony M. Keaveny and Keith A. Wear

On inlet pressure boundary conditions for CT-based computation of fractional flow reserve: clinical measurement of aortic pressure pp. 517-526

Jincheng Liu, Suqin Huang, Xue Wang, Bao Li, Junling Ma, Yutong Sun, Jian Liu and Youjun Liu

Early detection of Parkinson disease using stacking ensemble method pp. 527-539

Saroj Kumar Biswas, Arpita Nath Boruah, Rajib Saha, Ravi Shankar Raj, Manomita Chakraborty and Monali Bordoloi

ECG classification system based on multi-domain features approach coupled with least square support vector machine (LS-SVM) pp. 540-547

Russel R. Majeed and Sarmad K. D. Alkhafaji

Decomposition of micromotion at the head-neck interface in total hip arthroplasty during walking pp. 548-558

Guoxian Zhang, Shu Yang, Wen Cui, Zhi Huang, Xiaogang Zhang, Yali Zhang, Junyan Li and Zhongmin Jin

Evaluation of biomechanics using different traction devices in distalization of maxillary molar with clear aligners: a finite element study pp. 559-567

Lili Ji, Bing Li and Xiuping Wu

Patient-specific pre-operative simulation of the surgically assisted rapid maxillary expansion using finite element method and Latin hypercube sampling: workflow and first clinical results pp. 568-579

L. Bonitz, A. Volf, S. Hassfeld, A. Pugachev, B. Ludwig, S. Chhatwani and A. Bicsák

EEG signal classification of tinnitus based on SVM and sample entropy pp. 580-594

Mai Jianbiao, Wang Xinzui, Li Zhaobo, Liu Juan, Zhang Zhongwei and Fu Hui

Analysis of an environmental epidemic model based on voluntary vaccination policy pp. 595-611

Ke-Lu Li, Jun-Yuan Yang and Xue-Zhi Li

A memory effect model to predict COVID-19: analysis and simulation pp. 612-628

Aatif Ali, Abdelouahed Alla Hamou, Saeed Islam, Taseer Muhammad and Alamzeb Khan

Volume 26, issue 4, 2023

Computational prediction of the long-term behavior of the femoral density after THR using the Silent Hip stem pp. 373-382

Zainab Al-Hajaj, Pouria Tavakkoli Avval and Habiba Bougherara

Locating and sizing tumor nodules in human prostate using instrumented probing – computational framework and experimental validation pp. 383-398

Antonio Candito, Daniel W. Good, Javier Palacio-Torralba, Steven Hammer, Olufemi Johnson, S. Alan McNeill, Robert L. Reuben and Yuhang Chen

A unified framework of cell population dynamics and mechanical stimulus using a discrete approach in bone remodelling pp. 399-411

Diego Quexada, Salah Ramtani, Olfa Trabelsi, Kalenia Marquez, Marie-Christine, Dorian Luis Linero Segrera, Carlos Duque-Daza and Diego Alexander Garzón Alvarado

Full body musculoskeletal model for simulations of gait in persons with transtibial amputation pp. 412-423

Andrea M. Willson, Anthony J. Anderson, Chris A. Richburg, Brittney C. Muir, Joseph Czerniecki, Katherine M. Steele and Patrick M. Aubin

Extinction and persistence of a stochastic delayed Covid-19 epidemic model pp. 424-437

Amir Khan, Rukhsar Ikram, Anwar Saeed, Mostafa Zahri, Taza Gul and Usa Wannasingha Humphries

A computational framework for investigating bacteria transport in microvasculature pp. 438-449

Peter Windes, Danesh K. Tafti and Bahareh Behkam

Multimodal data analysis of knee osteoarthritis assessment: factors selection for conservative care decision making pp. 450-459

F. Bensalma, N. Mezghani, A. Cagnin, A. Fuente, L. Lenoir and N. Hagemeister

Effect of different helmets against ground impact based on the in-depth reconstruction of electric two-wheeler accidents pp. 460-483

Yong Han, Yong He, Di Pan, Liya Lin, Yisheng Chen and Hao Feng

Investigation of traffic accidents involving seated pedestrians using a finite element simulation-based approach pp. 484-497

Daniel Grindle, Ahmed Balubaid and Costin Untaroiu

Volume 26, issue 3, 2023

Nonlinear dynamics of membrane skeleton in osteocyte pp. 249-260

Zhuang Han, Lian-Wen Sun, Xin-Tong Wu, Xiao Yang and Yu-Bo Fan

Prediction of cortical bone mineral apposition rate in response to loading using an adaptive neuro-fuzzy inference system pp. 261-280

Rakesh Kumar and Vimal Kumar Pathak

Modelling the role of membrane mechanics in cell adhesion on titanium oxide nanotubes pp. 281-290

Matej Daniel, Kristina Eleršič Filipič, Eva Filová, Tobias Judl and Jaroslav Fojt

Effects of backrest and seat-pan inclination of tractor seat on biomechanical characteristics of lumbar, abdomen, leg and spine pp. 291-304

Qichao Wang, Yihuan Huo, Zheng Xu, Wenjie Zhang, Yujun Shang and Hongmei Xu

Control strategy for intraspinal microstimulation based on central pattern generator pp. 305-314

Xiongjie Lou, Yan Wu, Song Lu and Xiaoyan Shen

Numerical simulation to the activation energy study on blood flow of seminal nanofluid with mixed convection effects pp. 315-325

M. G. Ibrahim

A likelihood swarm whale optimization based LeNet classifier approach for the prediction and diagnosis of patients with atherosclerosis disease pp. 326-337

P. Govindamoorthi and P. Ranjith Kumar

Computational modeling of hypercoagulability in COVID-19 pp. 338-349

Ge Zhu, Susree Modepalli, Mohan Anand and He Li

An efficient and low complex model for optimal RBM features with weighted score-based ensemble multi-disease prediction pp. 350-372

T. P. Anish and P. M. Joe Prathap

Volume 26, issue 2, 2023

The simultaneous changes in motor performance and EEG patterns in beta band during learning dart throwing skill in dominant and non-dominant hand pp. 127-137

Yaser Khanjari, Elahe Arabameri, Mehdi Shahbazi, Shahzad Tahmasebi, Fariba Bahrami and Ali Mobaien

The measles epidemic model assessment under real statistics: an application of stochastic optimal control theory pp. 138-159

Peijiang Liu, Rukhsar Ikram, Amir Khan and Anwarud Din

Automated prediction of COVID-19 mortality outcome using clinical and laboratory data based on hierarchical feature selection and random forest classifier pp. 160-173

Nasrin Amini, Mahdi Mahdavi, Hadi Choubdar, Atefeh Abedini, Ahmad Shalbaf and Reza Lashgari

In silico modelling of long bone healing involving osteoconduction and mechanical stimulation pp. 174-186

Jean-Louis Milan, Ian Manifacier, Nicolas Rousseau and Martine Pithioux

A response surface methodology to determine the optimal objective function weightings within a multi-objective optimization digital human model used to predict postures pp. 187-198

Justin B. Davidson, Joshua G. A. Cashaback and Steven L. Fischer

Mathematical analysis of oxygen and carbon dioxide exchange in the human capillary and tissue system pp. 199-208

Ahsan Ul Haq Lone and M. A. Khanday

Hemodynamic analysis of hybrid treatment for thoracoabdominal aortic aneurysm based on Newtonian and non-Newtonian models in a patient-specific model pp. 209-221

Jun Wen, Jiarong Wang, Liqing Peng, Ding Yuan and Tinghui Zheng

Two-stage classification of electromyogram signals from hand grasps in the transverse plane pp. 222-234

Nantarika Thiamchoo and Pornchai Phukpattaranont

Wall shear stress indicators influence the regular hemodynamic conditions in coronary main arterial diseases: cardiovascular abnormalities pp. 235-248

M. Ferdows, K. E. Hoque, M.Z.I. Bangalee and M. A. Xenos

Volume 26, issue 1, 2023

Developing a method for quantifying hip joint angles and moments during walking using neural networks and wearables pp. 1-11

Megan V. McCabe, Douglas W. Van Citters and Ryan M. Chapman

Analysis of stress and stabilization in adolescent with osteoporotic idiopathic scoliosis: finite element method pp. 12-24

Qiaolin Zhang, Yan Zhang, Teo. Ee Chon, Julien S. Baker and Yaodong Gu

Structure design and mechanical performance analysis of three kinds of bioresorbable poly-lactic acid (PLA) stents pp. 25-37

Yangyang Wang, Hongmei Wu, Shiyi Fan, Jingzhi Wu and Sisi Yang

Attack detection and mitigation scheme through novel authentication model enabled optimized neural network in smart healthcare pp. 38-64

Sagarkumar K. Patel

Convolutional LSTM: a deep learning approach to predict shoulder joint reaction forces pp. 65-77

S. T. Mubarrat and S. Chowdhury

Finite element analysis of 3D-printed personalized titanium plates for mandibular angle fracture pp. 78-89

Yan Li, Hui Li, Qingguo Lai, Runqi Xue, Kaiwen Zhu and Yanwei Deng

Heat distribution and the condition of hypothermia in the multi-layered human head: A mathematical model pp. 90-97

Ahsan Ul Haq Lone, M.A. Khanday, Saqib Mubarak and Feroze A. Reshi

Analysis of SIQR type mathematical model under Atangana-Baleanu fractional differential operator pp. 98-112

Xuan Liu, Muhammad Arfan, Mati ur Rahman and Bibi Fatima

Hemodynamics of anterior circulation intracranial aneurysms with daughter blebs: investigating the multidirectionality of blood flow fields pp. 113-125

Dimitrios S. Lampropoulos, Ioannis D. Boutopoulos, George C. Bourantas, Karol Miller, Petros E. Zampakis and Vassilios C. Loukopoulos