Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 24, issue S1, 2021

ABSTRACTS 46ème Congrès Société Biomécanique pp. S1-S325

The Editors

Volume 24, issue 16, 2021

A fast algebraic approach for noninvasive prediction of fractional flow reserve in coronary arteries pp. 1761-1793

Iyad Fayssal and Fadl Moukalled

Simulation of non-Newtonian flow of blood in a modified laparoscopic forceps used in minimally invasive surgery pp. 1794-1806

Md. Abdul Raheem Junaidi, Harsha Sista, Ram Chandra Murthy Kalluri, Y. V. Daseswara Rao and Alla Gopala Krishna Gokhale

Biomechanical modeling of spinal ligaments: finite element analysis of L4-L5 spinal segment pp. 1807-1818

Shabnam Hamidrad, Masoud Abdollahi, Vahid Badali, Mohammad Nikkhoo and Sadegh Naserkhaki

The effects of sex and landing task on hip mechanics pp. 1819-1827

Joshua T. Weinhandl, Bobbie S. Irmischer and Hunter J. Bennett

Experimental and numerical diagnosis of fatigue foot using convolutional neural network pp. 1828-1840

Abbas Sharifi, Mohsen Ahmadi, Mohammad Amin Mehni, Saeid Jafarzadeh Ghoushchi and Yaghoub Pourasad

Analysis of stress in periodontium associated with orthodontic tooth movement: a three dimensional finite element analysis pp. 1841-1853

Ankita Jain, G. S. Prasantha, Silju Mathew and Sharanya Sabrish

A three-dimensional measurement based on CT for the posterior tilt with ideal inter-and intra-observer reliability in non-displaced femoral neck fractures pp. 1854-1861

Shenghui Wu, Wei Wang, Binbin Zhang, Haowei Zhang, Xinsheng Xu, Guangyi Li, Huipeng Shi and Jiong Mei

On the impact force analysis of two-leg landing with a flexed knee pp. 1862-1875

Marzieh Mojaddarasil and Mohammad Jafar Sadigh

Volume 24, issue 15, 2021

Inverse identification of hyperelastic constitutive parameters of skeletal muscles via optimization of AI techniques pp. 1647-1659

Yang Li, Jianbing Sang, Xinyu Wei, Wenying Yu, Weichang Tian and G. R. Liu

Quantitative analysis of voluntary movement and anticipatory postural adjustments: a functional approach pp. 1660-1669

Cinzia Amici, Federica Ragni, Barbara Piovanelli, Riccardo Buraschi, Rodolfo Faglia, Stefano Negrini and Joel Pollet

Simulation analysis of mixing in passive microchannel with fractal obstacles based on Murray's law pp. 1670-1678

Xueye Chen, Yaolong Zhang and Jinyuan Wang

Finite element analysis of lumbar spine with different backpack positions in parachuting landing pp. 1679-1686

Chenyu Luo, Tianyun Jiang, Shan Tian and Yubo Fan

Evaluation of fixation after plating of distal radius fractures - a validation study pp. 1687-1692

Takahiro Yamazaki, Yusuke Matsuura, Takane Suzuki and Seiji Ohtori

Patient-specific fluid–structure interaction model of bile flow: comparison between 1-way and 2-way algorithms pp. 1693-1717

Alex G. Kuchumov, Vasily Vedeneev, Vladimir Samartsev, Aleksandr Khairulin and Oleg Ivanov

A modified method of computed fluid dynamics simulation in abdominal aorta and visceral arteries pp. 1718-1729

Yun Shi, Chen Peng, Junzhen Liu, Hongzhi Lan, Chong Li, Wang Qin, Tong Yuan, Yuanqing Kan, Shengzhang Wang and Weiguo Fu

Prediction of biomechanical responses of human lumbar discs - a stochastic finite element model analysis pp. 1730-1741

Wei Wang, Chaochao Zhou, Runsheng Guo, Thomas Cha and Guoan Li

Finite element analysis of fixed bone plates over fractured femur model pp. 1742-1751

Harbhajan Ahirwar, Vijay Kumar Gupta and Himansu Sekhar Nanda

Prediction of interfragmentary movement in fracture fixation constructs using a combination of finite element modeling and rigid body assumptions pp. 1752-1760

M. Mühling, M. Winkler and P. Augat

Volume 24, issue 14, 2021

Importance of impact boundary conditions and pre-crash arm position for the prediction of thoracic response to pendulum, side sled, and near side vehicle impacts pp. 1531-1544

Donata Gierczycka and Duane Cronin

A finite element study of fatigue load effects on total hip joint prosthesis pp. 1545-1551

Seyed Arvin Aghili, Kamran Hassani and Mohammad Nikkhoo

Muscle metabolic energy costs while modifying propulsive force generation during walking pp. 1552-1565

Richard E. Pimentel, Noah L. Pieper, William H. Clark and Jason R. Franz

The optimal structural analysis of cobalt-chromium alloy (L-605) coronary stents pp. 1566-1577

Huajie Wang, Xianying Wang, Hongliang Qian, Deda Lou, Mingming Song and Xiaoqian Zhao

Simulation of the mechanical behavior of osteons using artificial gravity devices in microgravity pp. 1578-1587

Hao Zhang, Hai-Ying Liu, Chun-Qiu Zhang, Zhen-Zhong Liu and Wei Wang

The elastoplastic numerical model and verification by macroindentation experiment of femoral head pp. 1588-1594

Jun Wang, Chen Yi, Sufang Wang, Ling Wang, Haiyou Jia, Bo Chen and Yong Huan

Evaluating the biomechanical characteristics of cuffed-tracheostomy tubes using finite element analysis pp. 1595-1605

Dhananjay Radhakrishnan Subramaniam, Liran Oren, J. Paul Willging and Ephraim J. Gutmark

The influence of framework material on stress distribution in maxillary complete-arch fixed prostheses supported by four dental implants: a three-dimensional finite element analysis pp. 1606-1617

Suleyman Cagatay Dayan and Onur Geckili

Applying Laplace Adomian decomposition method (LADM) for solving a model of Covid-19 pp. 1618-1628

OPhir Nave, Uziel Shemesh and Israel HarTuv

Predicting TAVI paravalvular regurgitation outcomes based on numerical simulation of the aortic annulus eccentricity and perivalvular areas pp. 1629-1637

Marcos Loureiro-Ga, Cesar Veiga, Generosa Fdez-Manin, Victor Alfonso Jimenez, Pablo Juan-Salvadores, Laura Busto, Jose Antonio Baz and Andrés Iñiguez

Quantification of the effect of compression garments on fatigue behavior in cycling pp. 1638-1645

Kourosh Bajelani, Ahmad R. Arshi and Amir N. Akhavan

Volume 24, issue 13, 2021

Application of multi-component fluid model in studies of the origin of skin burns during electrosurgical procedures pp. 1409-1418

Marija Radmilović-Radjenović, Martin Sabo and Branislav Radjenović

Finite element analysis of lower limb exoskeleton during sit-to-stand transition pp. 1419-1425

Umesh K. and Vidhyapriya R.

Genetic particle filter improved fuzzy-AEEMD for ECG signal de-noising pp. 1426-1436

Rajiv Kapoor and Rajesh Birok

Mandibular reconstruction system reliability analysis using probabilistic finite element method pp. 1437-1449

S. Kargarnejad, F. Ghalichi, M. Pourgol-Mohammad and A. Garajei

Dynamic behaviors and protection mechanisms of sulcata tortoise carapace pp. 1450-1462

P. Jearanaisilawong, N. Jongpairojcosit and C. Glunrawd

Electric cyclist injury of the collision between right turn of truck and electric bicycle pp. 1463-1472

Lihua Wei, Yifan Tan, Haixu Liu and Yun Pu

A study on the transport and interaction between blood flow and low-density-lipoprotein in near-wall regions of blood vessels pp. 1473-1487

Satyajit Choudhury, Kameswararao Anupindi and B. S. V. Patnaik

Role of the left coronary artery geometry configuration in atherosusceptibility: CFD simulations considering sPTT model for blood pp. 1488-1503

E. Miranda, L.C. Sousa, C.C. António, C.F. Castro and S.I.S. Pinto

Application of fuzzy neural network model and current-voltage analysis of biologically active points for prediction post-surgery risks pp. 1504-1516

Olga Shatalova, Sergey Filist, Nikolay Korenevskiy, Riad Taha Al-kasasbeh, Ashraf Shaqadan, Zeinab Protasova, Maksim Ilyash and Anatoly Rybochkin

Effect of the medial collateral ligament and the lateral ulnar collateral ligament injury on elbow stability: a finite element analysis pp. 1517-1529

Fang Wang, Shuoqi Jia, Mingxin Li, Kui Pan, Jianguo Zhang and Yubo Fan

Volume 24, issue 12, 2021

Numerical modelling to assess the tear force of human capsulotomy margin pp. 1287-1293

S. F. Han and Y. Yang

Influence of renal artery stenosis morphology on hemodynamics pp. 1294-1301

Zhuxiang Xiong, Ding Yuan, Jiarong Wang, Tinghui Zheng and Yubo Fan

Effects of a contusion load on spinal cord with different curvatures pp. 1302-1309

Qian-qian Yu, Si-qing Liu, Jian-jie Wang, Meng-lei Xu, Wen-xuan Zhang, Li-ming Cheng and Rui Zhu

An open-source musculoskeletal model of the lumbar spine and lower limbs: a validation for movements of the lumbar spine pp. 1310-1325

C. D. Favier, M. E. Finnegan, R. A. Quest, L. Honeyfield, A. H. McGregor and A. T. M. Phillips

Double diffusive convection and Hall effect in creeping flow of viscous nanofluid through a convergent microchannel: a biotechnological applications pp. 1326-1343

Hu Ge-JiLe, Khurram Javid, Sami Ullah Khan, Mohsin Raza, M. Ijaz Khan and Sumaira Qayyum

Measurement of instantaneous Achilles tendon moment arm and force during the stance phase of running pp. 1344-1354

Giorgos Krikelis, Matthew T. G. Pain and Laura-Anne M. Furlong

Carbon fiber-reinforced PEEK in implant dentistry: A scoping review on the finite element method pp. 1355-1367

Júlio C. M. Souza, Sofia S. Pinho, Maria Pranto Braz, Filipe S. Silva and Bruno Henriques

Research on removal algorithm of EOG artifacts in single-channel EEG signals based on CEEMDAN-BD pp. 1368-1379

Quanyu Wu, WenQiang Zhang, Ye Wang, Wenxi Zhang and Xiaojie Liu

Simulated muscle activity in locomotion: implications of co-occurrence between effort minimisation and gait modularity for robot-assisted rehabilitation therapy pp. 1380-1392

Marco Maddalena and Mozafar Saadat

A novel material point method (MPM) based needle-tissue interaction model pp. 1393-1407

Murong Li, Yong Lei, Dedong Gao, Yingda Hu and Xiong Zhang

Volume 24, issue 11, 2021

A mesoscale finite element modeling approach for understanding brain morphology and material heterogeneity effects in chronic traumatic encephalopathy pp. 1169-1183

A. Bakhtiarydavijani, G. Khalid, M. A. Murphy, K. L. Johnson, L. E. Peterson, M. Jones, M. F. Horstemeyer, A. C. Dobbins and R. K. Prabhu

Modeling of muscular activation of the muscle-tendon complex using discrete element method pp. 1184-1194

Anthony Roux, Jennyfer Lecompte, Ivan Iordanoff and Sébastien Laporte

Development and evaluation of a new procedure for subject-specific tensioning of finite element knee ligaments pp. 1195-1205

Bhrigu K. Lahkar, Pierre-Yves Rohan, Helene Pillet, Patricia Thoreux and Wafa Skalli

Influence of gap distance between bone and plate on structural stiffness and parallel interfragmental movement in far-cortical locking technique - a biomechanical study pp. 1206-1211

Yong-Jian Feng, Kang-Ping Lin, Cheng-Lung Tsai and Hung-Wen Wei

Evaluation of facial symmetry after jaw reconstruction surgery pp. 1212-1220

Jade Duchscherer, Daniel Aalto and Lindsey Westover

New approach of controlling the area affected in brain tumour treatment by LITT pp. 1221-1227

Sadegh Amini and Hossein Ahmadikia

Analysis of the passive biomechanical behavior of a sheep-specific aortic artery in pulsatile flow conditions pp. 1228-1241

Claudio M. García–Herrera, Álvaro A. Cuevas, Diego J. Celentano, Álvaro Navarrete, Pedro Aranda, Emilio Herrera and Sergio Uribe

Influence of the dental implant macrogeometry and threads design on primary stability: an in vitro simulation on artificial bone blocks pp. 1242-1250

Luca Comuzzi, Margherita Tumedei, Francesco De Angelis, Felice Lorusso, Adriano Piattelli and Giovanna Iezzi

Flow analysis of aortic dissection: comparison of inflow boundary conditions for computational models based on 4D PCMRI and Doppler ultrasound pp. 1251-1262

Zhenfeng Li, Shichao Liang, Huanming Xu, Minjia Zhu, Yuqian Mei, Jiang Xiong and Duanduan Chen

Reduced joint reaction and muscle forces with barefoot running pp. 1263-1273

Hyun Kyung Kim, Qichang Mei, Yaodong Gu, Ali Mirjalili and Justin Fernandez

Concurrent consideration of cortical and cancellous bone within continuum bone remodelling pp. 1274-1285

Ina Schmidt, Areti Papastavrou and Paul Steinmann

Volume 24, issue 10, 2021

Wavelet-based semblance analysis to determine muscle synergy for different handstand postures of Chilean circus athletes pp. 1053-1063

Mailyn Calderón-Díaz, Ricardo Ulloa-Jiménez, Carolina Saavedra and Rodrigo Salas

A comparative finite element simulation of locking compression plate materials for tibial fracture treatment pp. 1064-1072

Sami Beirami, Mohammad Nikkhoo, Kamran Hassani and Alireza Karimi

Fluid flow effects on the degradation kinetics of bioresorbable polymers pp. 1073-1084

Zhitao Liu, Hongbo Zhang and Huanxin Lai

Biomechanical analysis of reinstating buccally flared maxillary 2nd molars using 3D printing anchorage supports: a 3D finite element study pp. 1085-1096

Yunchun Kuang, Chunjuan Wang, Bo Hu, Ge Feng, Chao Wang and Jinlin Song

Effect of simulated sensorimotor noise on kinematic variability and stability of a biped walking model pp. 1097-1103

Sina Mehdizadeh and Paul S. Glazier

BOPS: a Matlab toolbox to batch musculoskeletal data processing for OpenSim pp. 1104-1114

Bruno L. S. Bedo, Alice Mantoan, Danilo S. Catelli, Willian Cruaud, Monica Reggiani and Mario Lamontagne

The biomechanical effects of Ti versus PEEK used in the PLIF surgery on lumbar spine: a finite element analysis pp. 1115-1124

Hongwei Wang, Yi Wan, Xinyu Liu, Bing Ren, Yan Xia and Zhanqiang Liu

Transport and deposition of ultrafine particles in the upper tracheobronchial tree: a comparative study between approximate and realistic respiratory tract models pp. 1125-1135

Jingliang Dong, Jiang Li, Lin Tian and Jiyuan Tu

Are college campuses superspreaders? A data-driven modeling study pp. 1136-1145

Hannah Lu, Cortney Weintz, Joseph Pace, Dhiraj Indana, Kevin Linka and Ellen Kuhl

Multi disease-prediction framework using hybrid deep learning: an optimal prediction model pp. 1146-1168

Anusha Ampavathi and T. Vijaya Saradhi

Volume 24, issue 9, 2021

Classification of the mechanism of toxicity as applied to human cell line ECV304 pp. 933-944

Yasser Abd Djawad, Janice Kiely and Richard Luxton

Classification of forearm EMG signals for 10 motions using optimum feature-channel combinations pp. 945-955

Muhammad Shahzaib, Sadia Shakil, Sajid Ghuffar, Moazam Maqsood and Farrukh A. Bhatti

Varying speed modulation of continuous-flow left ventricular assist device based on cardiovascular coupling numerical model pp. 956-972

Hongtao Liu, Shuqin Liu and Xiaoxu Ma

Development of a musculoskeletal model of the wrist to predict frictional work dissipated due to tendon gliding resistance in the carpal tunnel pp. 973-984

J. D. Glenday, B. Steinhilber, F. Jung and D. F. B. Haeufle

Efficient focusing of microwave hyperthermia for small deep-seated breast tumors treatment using particle swarm optimization pp. 985-994

Heba Abdelhamid Elkayal and Nour Eldin Ismail

On the molecular structure of Remdesivir for the treatment of Covid-19 pp. 995-1002

S. M. Sheikholeslami, A. Jahanbani and Z. Shao

PyTHang: an open-source wearable sensor system for real-time monitoring of head-torso angle for ambulatory applications pp. 1003-1018

Güray Gürkan

Propagation of registration errors into the change in maximum total point motion for determining stability of tibial baseplates pp. 1019-1025

Abigail E. Niesen and Maury L. Hull

Does overlay preparation design affect polymerization shrinkage stress distribution? A 3D FEA study pp. 1026-1034

Guilherme Schmitt de Andrade, Alana Barbosa Alves Pinto, João Paulo Mendes Tribst, Eliseo Pablo Chun, Alexandre Luiz Souto Borges and Guilherme de Siqueira Ferreira Anzaloni Saavedra

Design optimization of implant geometrical characteristics enhancing primary stability using FEA of stress distribution around dental prosthesis pp. 1035-1051

Sameh Elleuch, Hanen Jrad, Amir Kessentini, Mondher Wali and Fakhreddine Dammak

Volume 24, issue 8, 2021

Numerical analysis of the effects of ossicular chain malformations on bone conduction stimulation pp. 817-830

Yu Zhao, Wen Liu, Houguang Liu, Jianhua Yang, Lei Zhou and Xinsheng Huang

Analysis of the relationship between hip joint flexion/extension and torques in the mark III space suit using a computational dynamics model pp. 831-843

Patrick McKeen, Conor Cullinane, Richard Rhodes and Leia Stirling

Design and fluid flow simulation of modified laparoscopic forceps pp. 844-863

Md. Abdul Raheem Junaidi, Ram Chandra Murthy Kalluri, Y. V. Daseswara Rao, Alla Gopala Krishna Gokhale and Aakrit Patel

Artificial Intelligence-Assisted motion capture for medical applications: a comparative study between markerless and passive marker motion capture pp. 864-873

Iwori Takeda, Atsushi Yamada and Hiroshi Onodera

Towards a predictive simulation of brace action in adolescent idiopathic scoliosis pp. 874-882

Claudio Vergari, Zhuowei Chen, Léopold Robichon, Isabelle Courtois, Eric Ebermeyer, Raphaël Vialle, Tristan Langlais, Raphaël Pietton and Wafa Skalli

Numerical study of hemodynamics in a complete coronary bypass with venous and arterial grafts and different degrees of stenosis pp. 883-896

Shila Alizadehghobadi, Hasan Biglari, Hanieh Niroomand-Oscuii and Meisam H. Matin

Accurate simulation of the herniated cervical intervertebral disc using controllable expansion: a finite element study pp. 897-904

Dong Liang, Guan-Jun Tu, Ya-Xin Han and Da-Wei Guo

The biomechanical characteristics of human vestibular aqueduct: a numerical-based model construction and simulation pp. 905-912

Qingjie Guan, Dong Sun, Ming Zhao, Yingxi Liu, Shen Yu, Jianing Zhang, Rui Li, Kaili Sun, Xiuzhen Sun and Xu Bie

Finite element method based parametric study of Gastrocnemius-soleus recession: implications to the treatment of midfoot-forefoot overload syndrome pp. 913-921

Miko Lin Lv, Haowei Zhang, Liang Chen, Ying Liu, Fei Wang, Duo Wai-Chi Wong, Li Sun and Ming Ni

Biomechanical evaluation of the stability of extra-articular distal radius fractures fixed with volar locking plates according to the length of the distal locking screw pp. 922-932

Gyung-Hwan Oh, Hak-Sung Kim and Jung Il Lee

Volume 24, issue 7, 2021

Mechanical effects of distributed fibre orientation in the periodontal ligament of an idealised geometry pp. 701-709

Tomohiro Otani, Taiki Koga, Kazunori Nozaki, Yo Kobayashi and Masao Tanaka

On the functional connectivity between heart, muscle, and frontal brain cortex during exercise fatigability pp. 710-720

Kevin Alan Pichardo-Rivas and David Gutiérrez

The risk factors for early conversion to total knee arthroplasty after high tibial osteotomy pp. 721-727

Hong-bo Li, Si Nie, Min Lan, Zhi-ming Tang and Xin-gen Liao

A 3D registration methodology to evaluate the goodness of fit at the individual-respiratory mask interface pp. 728-739

J. W. R. Verberne, P. R. Worsley and D. L. Bader

Image-based morphometric studies of human coronary artery bifurcations with/without coronary artery disease pp. 740-752

Xueping Chen, Jingxing Dai, Jiangguo Lin, Yueheng Wu, Jun Ouyang, Meiping Huang, Jian Zhuang, Ying Fang and Jianhua Wu

Finite element analysis of human skull bone adaptation to mechanical loading pp. 753-764

Jose Gonzalez, Somer Nacy and George Youssef

Biomechanical evaluation of a novel mandibular distraction osteogenesis protocol: an in-vitro validation and the practical use of the method pp. 765-776

A. T. Şensoy, I. Kaymaz and Ü. Ertaş

A new musculoskeletal AnyBody™ detailed hand model pp. 777-787

Lucas Engelhardt, Maximilian Melzner, Linda Havelkova, Pavel Fiala, Patrik Christen, Sebastian Dendorfer and Ulrich Simon

Biomechanical analysis of lumbar spine with interbody fusion surgery and U-shaped lumbar interspinous spacers pp. 788-798

Jia-Yu Yin and Li-Xin Guo

Continuum modeling for neuronal lamination during cerebral morphogenesis considering cell migration and tissue growth pp. 799-805

Hironori Takeda, Yoshitaka Kameo and Taiji Adachi

Investigation of two-body wear behavior of zirconia-reinforced lithium silicate glass-ceramic for biomedical applications; in vitro chewing simulation pp. 806-815

Efe Çetin Yilmaz

Volume 24, issue 6, 2021

A custom-made distal humerus plate fabricated by selective laser melting pp. 585-596

Thansita Thomrungpiyathan, Suriya Luenam, Boonrat Lohwongwatana, Winai Sirichativapee, Kriengkrai Nabudda and Chedtha Puncreobutr

Leveraging machine learning for predicting human body model response in restraint design simulations pp. 597-611

Hamed Joodaki, Bronislaw Gepner and Jason Kerrigan

A model-based approach to predict neuromuscular control patterns that minimize ACL forces during jump landing pp. 612-622

Dieter Heinrich, Antonie J. van den Bogert, Robert Csapo and Werner Nachbauer

Hemodynamic study in 3D printed stenotic coronary artery models: experimental validation and transient simulation pp. 623-636

Violeta Carvalho, Nelson Rodrigues, Ricardo Ribeiro, Pedro F. Costa, José C. F. Teixeira, Rui A. Lima and Senhorinha F. C. F. Teixeira

Numerical investigation of mechanical behavior of human femoral diaphysis in normal and defective geometry: experimental evaluation pp. 637-652

Moeinoddin Mahmoudi and Hossein Mahbadi

Mathematical modeling of the Fontan blood circulation supported with pediatric ventricular assist device pp. 653-662

Ekaterina Rubtsova, Aleksandr Markov, Sergey Selishchev, Jamshid H. Karimov and Dmitry Telyshev

Biomechanical assessment of screw safety between far cortical locking and locked plating constructs pp. 663-672

Yuping Deng, Hanbin Ouyang, Pusheng Xie, Yanfang Wang, Yang Yang, Wenchang Tan, Dongliang Zhao, Shizhen Zhong and Wenhua Huang

Advanced mechanical ventilation modes: design and computer simulations pp. 673-686

E. Dincel

Parametric study of anterior percutaneous endoscopic cervical discectomy (APECD) pp. 687-699

Meng-Si Sun, Chen-Xi Yuchi, Xin-Yi Cai, Cheng-Fei Du and Zhong-Jun Mo

Volume 24, issue 5, 2021

On the importance of tunica intima in the aging aorta: a three-layered in silico model for computing wall stresses in abdominal aortic aneurysms pp. 467-484

Mario de Lucio, Marcos Fernández García, Jacobo Díaz García, Luis Esteban Romera Rodríguez and Francisco Álvarez Marcos

The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA pp. 485-495

P. Ausiello, S. Ciaramella, A. De Benedictis, A. Lanzotti, J. P. M. Tribst and D. C. Watts

Cell biophysical stimuli in lobopodium formation: a computer based approach pp. 496-505

Francisco Serrano-Alcalde, José Manuel García-Aznar and María José Gómez-Benito

Prediction of mechanical properties of human rib cortical bone using fractal dimension pp. 506-516

Juan Velázquez-Ameijide, Silvia García-Vilana, David Sánchez-Molina, Jordi Llumà, Eva Martínez-González, M. Carmen Rebollo-Soria and Carlos Arregui-Dalmases

Investigation of femur fracture potential in common pediatric falls using finite element analysis pp. 517-526

Keyonna McKinsey, Angela Thompson and Gina Bertocci

The cushioning function of woodpecker’s jaw apparatus during the pecking process pp. 527-537

Peng Xu, Yikun Ni, Shan Lu, Sijian Liu, Xue Zhou and Yubo Fan

Numerical implementation of an osmo-poro-visco-hyperelastic finite element solver: application to the intervertebral disc pp. 538-550

A. P. G. Castro and J. L. Alves

Mitigation of ocular artifacts for EEG signal using improved earth worm optimization-based neural network and lifting wavelet transform pp. 551-578

Devulapalli Shyam Prasad, Srinivasa Rao Chanamallu and Kodati Satya Prasad

Intra- and inter-observer reliability of measurements on 3D images of the calcaneus bone pp. 579-583

Dominique Misselyn, Aaron Caeyman, Harm Hoekstra, Stefaan Nijs and Giovanni Matricali

Volume 24, issue 4, 2020

A generic musculoskeletal model of the juvenile lower limb for biomechanical analyses of gait pp. 349-357

Reinhard Hainisch, Andreas Kranzl, Yi-Chung Lin, Marcus G. Pandy and Margit Gfoehler

Stress evaluation of different implant lengths on atrophic edentulous mandibles with fixed full-arch implant-supported prosthesis: a finite element analysis pp. 358-374

Fernanda Benevides, Renata Cimões, André Vajgel, Ramiro Brito Wilmersdorf and Bruna de Carvalho Farias Vajgel

The impact of calcification patterns in transcatheter aortic valve performance: a fluid-structure interaction analysis pp. 375-383

Giulia Luraghi, Jose Felix Rodriguez Matas, Marta Beretta, Nicole Chiozzi, Laura Iannetti and Francesco Migliavacca

Methodology for vehicle safety development and assessment accounting for occupant response variability to human and non-human factors pp. 384-399

Daniel Perez-Rapela, Jason L. Forman, Samuel H. Huddleston and Jeff R. Crandall

Sparse classification of discriminant nystagmus features using combined video-oculography tests and pupil tracking for common vestibular disorder recognition pp. 400-418

Aymen Mouelhi, Amine Ben Slama, Jihene Marrakchi, Hedi Trabelsi, Mounir Sayadi and Salam Labidi

Design and application of personalized surgical guides to treat complex tibial plateau malunion pp. 419-428

Chi-Pin Hsu, Shang-Chih Lin, Aamer Nazir, Chen-Te Wu, Shih-Sheng Chang and Yi-Sheng Chan

Influence of material properties and boundary conditions on patient-specific models pp. 429-439

Bastien Goin, Jean-Baptiste Renault, Lisa Thibes and Patrick Chabrand

Computational modelling of nasal respiratory flow pp. 440-458

H. Calmet, K. Inthavong, H. Owen, D. Dosimont, O. Lehmkuhl, G. Houzeaux and M. Vázquez

Voxel-based simulation of flow and temperature in the human nasal cavity pp. 459-466

Shinya Kimura, Shuta Miura, Toshihiro Sera, Hideo Yokota, Kenji Ono, Denis J. Doorly, Robert C. Schroter and Gaku Tanaka

Volume 24, issue 3, 2021

Tibiofemoral forces during FES rowing in individuals with spinal cord injury pp. 231-244

Vishnu D. Chandran, Rebecca L. Lambach, Robin S. Gibbons, Brian J. Andrews, Gary S. Beaupre and Saikat Pal

Finite element simulation and testing of cobalt-chromium stent: a parametric study on radial strength, recoil, foreshortening, and dogboning pp. 245-259

Avinash Kumar and Naresh Bhatnagar

The effect of sitting position changes from pedaling rehabilitation on muscle activity pp. 260-269

Lu Zongxing, Wei Xiangwen and You Shengxian

A finite element analysis of different pedicle screw placement strategies for treatment of Lenke 1 adolescent idiopathic scoliosis: which is better? pp. 270-277

Kai Chen, Jian Zhao, Yunfei Zhao, Changwei Yang and Ming Li

Finite element simulation of head impacts in mixed martial arts pp. 278-288

Stephen Tiernan, Aidan Meagher, David O’Sullivan and Eoin O’Kelly

Electroosmotically driven flow of micropolar bingham viscoplastic fluid in a wavy microchannel: application of computational biology stomach anatomy pp. 289-298

Anber Saleem, Mishal Nayab Kiani, Sohail Nadeem, Salman Akhtar, Mehdi Ghalambaz and Alibek Issakhov

General method for automated feature extraction and selection and its application for gender classification and biomechanical knowledge discovery of sex differences in spinal posture during stance and gait pp. 299-307

Carlo Dindorf, Jürgen Konradi, Claudia Wolf, Bertram Taetz, Gabriele Bleser, Janine Huthwelker, Philipp Drees, Michael Fröhlich and Ulrich Betz

Comparison of dynamic response of three TLIF techniques on the fused and adjacent segments under vibration pp. 308-319

Qing-Dong Wang and Li-Xin Guo

Tibial implant fixation in TKA worth a revision?—how to avoid stress-shielding even for stiff metallic implants pp. 320-332

B. Eidel, A. Gote, C.-P. Fritzen, A. Ohrndorf and H.-J. Christ

Parameter identification for the simulation of the periodontal ligament during the initial phase of orthodontic tooth movement pp. 333-348

Albert Heinrich Kaiser, Ludger Keilig, Reinhard Klein and Christoph Bourauel

Volume 24, issue 2, 2021

Frontal lobe oxyhemoglobin levels in patients with lower extremity burns assessed using a functional near-Infrared spectroscopy device during usual walking: a pilot study pp. 115-121

So Young Joo, Yoon Soo Cho, Kuem Ju Lee, Seung Yeol Lee and Cheong Hoon Seo

Statistical shape modeling of the pelvic floor to evaluate women with obstructed defecation symptoms pp. 122-130

Megan R. Routzong, Ghazaleh Rostaminia, Shaniel T. Bowen, Roger P. Goldberg and Steven D. Abramowitch

Idiopathic scoliosis and brace treatment: an innovative device to assess corrective pressure pp. 131-136

Jean Charles Gesbert, Briac Colobert, Lalao Rakotomanana and Philippe Violas

Muscle co-contraction in an upper limb musculoskeletal model: EMG-assisted vs. standard load-sharing pp. 137-150

Ehsan Sarshari, Matteo Mancuso, Alexandre Terrier, Alain Farron, Philippe Mullhaupt and Dominique Pioletti

Adsorption and sensing of an anticancer drug on the boron nitride nanocones; a computational inspection pp. 151-160

Chao Wang, Lizhen Shen and Liang Wu

Compressive stress relaxation behavior of articular cartilage and its effects on fluid pressure and solid displacement due to non-Newtonian flow pp. 161-172

Umair Farooq and J. I. Siddique

Investigation of airflow at different activity conditions in a realistic model of human upper respiratory tract pp. 173-187

Reza Tabe, Roohollah Rafee, Mohammad Sadegh Valipour and Goodarz Ahmadi

Extracting the elasticity of the human skin in microscale and in-vivo from atomic force microscopy experiments using viscoelastic models pp. 188-202

Sahba Iravanimanesh, Mohammad Ali Nazari, Fereshteh Jafarbeglou, Mohammad Mahjoob and Mojtaba Azadi

Classification of normal sinus rhythm, abnormal arrhythmia and congestive heart failure ECG signals using LSTM and hybrid CNN-SVM deep neural networks pp. 203-214

Ahmet Çınar and Seda Arslan Tuncer

Oxygen transport in a permeable model of abdominal aortic aneurysm pp. 215-229

Rana Zakerzadeh, Tanja Cupac and Michael Durka

Volume 24, issue 1, 2021

Comparison of frequency and magnitude of head impacts experienced by Peewee boys and girls in games of youth ice hockey pp. 1-13

Andrew Post, Clara Karton, Odette Thevenot, T. Blaine Hoshizaki, Michael Robidoux and Michael D. Gilchrist

Implant primary stability with an osteocondensation drilling protocol in different density polyurethane blocks pp. 14-20

Stefano Fanali, Margherita Tumedei, Pamela Pignatelli, Francesco Inchingolo, Paolo Pennacchietti, Gianluca Pace and Adriano Piattelli

Effect of foam densification and impact velocity on the performance of a football helmet using computational modeling pp. 21-32

Samuel T. Mills, Trevor S. Young, Lillian S. Chatham, Sourav Poddar, R. Dana Carpenter and Christopher M. Yakacki

Feasibility of an alternative method to estimate glenohumeral joint center from videogrammetry measurements and CT/MRI of patients pp. 33-42

Ehsan Sarshari, Matteo Mancuso, Alexandre Terrier, Alain Farron, Philippe Mullhaupt and Dominique Pioletti

Influence of tibial bearing curvatures of a customised total knee implant on squatting motion and loads pp. 43-55

Linjie Wang and Chang Jiang Wang

Postural symmetry evaluation using phase approximations of the follow-up CoP trajectories pp. 56-66

Tomasz Łukaszewicz, Zenon Kidoń, Dariusz Kania and Krystyna Pethe-Kania

Stress distribution is susceptible to the angle of the osteotomy in the high oblique sagittal osteotomy (HOSO): biomechanical evaluation using finite element analyses pp. 67-75

Herrera-Vizcaíno Carlos, Baselga Lahoz Marta, Pelliccioni Monrroy Orlando, Udeabor E Samuel, Robert Sader and Lukas Benedikt Seifert

Validation of a finite element model with six-year-old child anatomical characteristics as specified in Euro NCAP Pedestrian Human Model Certification (TB024) pp. 76-90

Haiyan Li, Kun Li, Yongqiang Huang, Wenle Lv, Shihai Cui, Lijuan He, Jesse Shijie Ruan and Chunxiang Wang

Effect of umbilical cord length on early fetal biomechanics pp. 91-100

Juan Felipe Sánchez Gutiérrez, Mercedes Olaya-C, Jorge Andrés Franco, Johana Guevara, Diego Alexander Garzón-Alvarado and María Lucía Gutiérrez Gómez

Prediction of RNA secondary structure based on stem region replacement using the RSRNA algorithm pp. 101-114

Chengzhen Xu, Longjian Gao, Jin Li, Longfeng Shen, Hong Liang, Kuan Luan and Xiaomin Wu