Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 17, issue S1, 2014

Corrigendum pp. viii-viii

The Editors

Editorial pp. 1-1

Philippe Pudlo

Compression, shear and bending on tissue-engineered cartilage: a numerical study pp. 2-3

C. Bandeiras, A. Completo and A. Ramos

Dynamic mesenchymal stem cells volumic seeding in a commercialized porous ceramic scaffold: a feasibility study pp. 4-5

S. Lemonnier, T. Bouderlique, P. Albanese, S. Naili, N. Chevallier, H. Rouard, J. Courty and T. Lemaire

Influence of the alveolar structure on the cell progression in the seeding of large bone scaffolds: an study pp. 6-7

S. Lemonnier, S. Naili and T. Lemaire

The role of implant's surface treatment to its preload pp. 8-9

L. Capek, A. Simunek, P. Henys and L. Dzan

Thoracic aorta morphometry and endograft deployment pp. 10-11

C. Guivier-Curien, M. Boufi, V. Deplano, O. Boiron, A. Loundou and Y. Alimi

Increase in coronary microvascular resistances after recanalisation with drug-eluting stent pp. 12-13

A. Anselmi, M. Harmouche, J.Ph. Verhoye, H. Corbineau, C. Mariano, M. Maasrani and A. Drochon

Left atrium wall tracking from MR images for strain assessment pp. 14-15

M. Evin, A. Redheuil, S. Hatem, D. Rosenbaum, K. Bouazizi-Verdier, A. De Cesare, P. Cluzel and N. Kachenoura

A new finite element method for inverse problems in structural analysis: application to atherosclerotic plaque elasticity reconstruction pp. 16-17

Adeline Bouvier, Flavien Deleaval, Marvin M. Doyley, Antoine Tacheau, Gérard Finet, Simon Le Floc'h, Guy Cloutier, Roderic I Pettigrew and Jacques Ohayon

Numerical modelling of the flow of the ultrasound contrast agents in tumour microvasculature pp. 18-19

L. Boyer, P. Le Notre, S. Randall Thomas, I. Leguerney, N. Lassau and S. Pitre-Champagnat

Numerical simulation of LDL transport through the carotid arterial wall pp. 20-21

C. Hansen, D. Bay, M.R. Jensen, B. Gervang, H.M. Jensen, S.A. Thrysøe and J.V. Nygaard

Comparison of different viscoelastic models for the characterisation of mechanical properties of human skin by indentation test pp. 22-23

M.-A. Abellan, J.-M. Bergheau and H. Zahouani

Mathematical model of human osteon and its validation by nanomechanical testing of bone lamella pp. 24-25

R. Korsa, J. Lukes, J. Sepitka, D. Kytyr and T. Mares

Biaxial mechanical response of graft material derived from human skin pp. 26-27

G.E. Leclerc, Q. Dermigny, M. Rachik and M.-C. Ho Ba Tho

Characterisation of a dedicated mechanical model for red blood cells: numerical simulations of optical tweezers experiment pp. 28-29

J. Sigüenza, S. Mendez and F. Nicoud

Fingertip finite element modelling – on choosing the right material property pp. 30-31

J. Dallard, X. Merlhiot, S. Duprey, X. Wang and A. Micaelli

New magnetic resonance elastography protocols to characterise deep back and thigh muscles pp. 32-33

M.K. Chakouch, F. Charleux and S.F. Bensamoun

Effects of bone density in the time-dependent mechanical properties of human cortical bone by nanoindentation pp. 34-35

S. Jaramillo-Isaza, P.-E. Mazeran, K. El-Kirat and M.-C. Ho Ba Tho

Time required for an oblate capsule in flow to reach equilibrium pp. 36-37

C. Dupont, F. Delahaye, D. Barthès-Biesel and A.-V. Salsac

Annulus fibrosus microstructure: an explanation to local heterogeneities pp. 38-39

A. Baldit, D. Ambard, F. Cherblanc and P. Royer

Compression tests of a living cell: a contact detection problem pp. 40-41

J. Sepitka, P. Grznarova, T. Fuzik and J. Lukes

Investigation of a six-year-old Hybrid III dummy neck stiffness and the consequences regarding out-of-position Neck Injury Criteria pp. 42-43

Aflalo Elizabeth, Erich-Walter Bluemcke, Mark Kloepper and Hakim Naceur

A methodology to assess non-axial loading on the distal radius pp. 44-45

E. Zapata, F. Duboeuf, R. Ellouz, S. Boutroy, D. Mitton and H. Follet

Experimental and numerical studies of fluid–structure interaction phenomena inside the head when subjected to a dynamical loading pp. 46-47

B. Fontenier, A. Hault-Dubrulle, J. Rahmoun, H. Naceur, P. Drazetic and C. Fontaine

Sled acceleration control for low-speed impact testing and transient response studies pp. 48-49

B. Sandoz, A. Simonin, D. Saletti and S. Laporte

Intermediate strain rate behaviour of cancellous bone: from the lower to the higher strain rate pp. 50-51

M. Prot, T.J. Cloete, D. Saletti and S. Laporte

A model for micromotion-induced fluid flow at the bone-implant interface pp. 52-53

V. Malfroy Camine, D. Pioletti and A. Terrier

Rapid prototyping – a promising technique for orthopaedic implant fabrication: application and validation of TKA prototypes for in-vitro testing pp. 54-55

A. Lorenz, Y. Herzog, P. Schnauffer, Maik Arnold, N. Wülker and U.G. Leichtle

An innovative method for the three-dimensional study of hip joint motion pp. 56-57

N. Bonneau, J. Bouhallier, M. Haeusler and O. Gagey

Finite element investigation of the intervertebral disc behaviour pp. 58-59

B. Aour and N. Damba

Structural and behavioural analysis of children's cortical bones pp. 60-61

E. Lefèvre, F. Duboeuf, S. Rizzo, C. Baron, H. Follet and M. Pithioux

Biomechanical analysis and modelling of lumbar belt: parametric study pp. 62-63

R. Bonnaire, W.S. Han, J. Molimard, P. Calmels and R. Convert

Computed tomography morphometric analysis of porcine spinal growth for scoliosis model development pp. 64-65

P. Pillard, T. Cachon, C. Carozzo, D. Fau, T. Odent and E. Viguier

Influence of age and localisation on pedicle fixation in immature porcine spines pp. 66-67

S. Le Cann, T. Cachon, E. Viguier, C. Baron, L. Miladi, T. Odent, Jm. Rossi and P. Chabrand

characterisation of the elasticity and the permeability of the mouse cartilage during growth using microindentation pp. 68-69

J-Ph. Berteau, M. Oyen and S. Shefelbine

Numerical simulations in a bony callus pp. 70-71

L. Ellejmi, A.M. Mancuso, M. Racila and J.M. Crolet

Biomechanical analysis of spinal instrumentation systems dedicated to stabilise thoracolumbar fractures: comparison between standard open surgical instrumentation and percutaneous techniques pp. 72-73

A. Germaneau, M. Saget, T. Vendeuvre, P. Doumalin, J.-C. Dupré, F. Brémand, F. Hesser, P. Maxy and P. Rigoard

A framework towards personalisation and active muscle integration in a 3D finite-element neck model for orthopaedic applications pp. 74-75

S. Howley, D. Bonneau and B. Fréchède

Influence of biomechanical multi-joint models used in global optimisation to estimate healthy and osteoarthritis knee kinematics pp. 76-77

J. Clément, N. Hagemeister, R. Dumas, M. Kanhonou and J.A. de Guise

Analysis of mimic facial movements based on motion capture pp. 78-79

K. Ben Mansour, F-R. Sarhan, C. Neiva, C. Godard, B. Devauchelle, F. Marin and S. Dakpé

Analysis of ankle stiffness for asymptomatic subjects and transfemoral amputees in daily living situations pp. 80-81

X. Drevelle, C. Villa, X. Bonnet, J. Bascou, I. Loiret and H. Pillet

Effect of custom foot orthotics on three-dimensional kinematics and dynamics during walking pp. 82-83

S. Delacroix, A. Lavigne, D. Nuytens and L. Chèze

Kinematic model and elbow flexion interaction on shoulder range of motion pp. 84-85

D. Haering, M. Raison, A. Arndt and M. Begon

Biomechanical analysis of interaction strategies using touchscreen: preliminary study pp. 86-87

J. Jacquier-Bret, P. Gorce, L. Genaro Motti and N. Vigouroux

What is the most efficient for torque steadiness in young adults: a real-time visual feedback of performance or proprioceptive inputs? pp. 88-89

A. Toumi, I. Hilal and E. Simoneau-Buessinger

An upper limb model proposal for multi-body optimisation: effects of anatomical constraints on the kinematics pp. 90-91

A. Naaim, A. El Habachi, F. Moissenet, R. Dumas and L. Chèze

Muscular power as a function of load in elderly women pp. 92-93

H. Zbinden-Foncea, T. Valenzuela, F. Espíldora, L. Peñailillo and P.A. Willems

Turning resistance of a manual wheelchair: a theoretical study pp. 94-95

J. Bascou, H. Pillet, K. Kollia, C. Sauret, P. Thoreux and F. Lavaste

Estimation of the fingers joint axes of rotation in flexion–extension pp. 96-97

P. Devos, K. Ben Mansour, C. Hansen and F. Marin

How do healthy older pedestrians walk when they cross the street? pp. 98-99

J. Delzenne, A. Bourrelly, C. Garnier, J. Naveteur and E. Watelain

Unipodal landing in individuals with unilateral chronic ankle instability pp. 100-101

R. Pionnier, N. Découfour, F. Barbier, C. Popineau and E. Simoneau-Buessinger

The contribution of handgrip assistance on lower limb joint moments during sit-to-stand and stand-to-sit: a preliminary comparative study pp. 102-103

A. Saadé, P. Pudlo, M. Lempereur and O. Rémy-Néris

Walking efficiency in children with cerebral palsy: relation to muscular strength and gait parameters pp. 104-105

A. Pouliot-Laforte, A. Parent and L. Ballaz

Articulated vs. fixed carbon-fibre prosthesis after transmetatarsial amputation: a case study pp. 106-107

A. Parent, A. Pouliot-Laforte, M. Laberge, R. Hamdy, R. Rochelle and L. Ballaz

Benefits of functional calibration for estimating elbow joint angles using magneto-inertial sensors: preliminary results pp. 108-109

B. Bouvier, A. Savescu, S. Duprey and R. Dumas

Determination of vertical ground reaction forces under each foot during walking pp. 110-111

G.M. Meurisse and G.J. Bastien

Knee crosstalk is not a quality indicator of the hip rotation pp. 112-113

E. Desailly

Small cause, great impact: a sensitivity study in musculoskeletal modelling of the hand pp. 114-115

C. Hansen, K. Ben Mansour, P. Devos and F. Marin

Effect of vibration frequency and angle knee flexion on muscular activity and transmissibility function during static whole body vibration exercise pp. 116-117

S. Duc, M. Munera, X. Chiementin and W. Bertucci

Impact of partial-thickness tears on supraspinatus tendon strain based on a finite element analysis pp. 118-119

C. Engelhardt, A. Farron, F. Becce, D. Pioletti and A. Terrier

cervical intervertebral disc characterisation by elastography pp. 120-121

C. Vergari, P. Rouch, G. Dubois, D. Bonneau, J. Dubousset, M. Tanter, J.L. Gennisson and W. Skalli

Optimisation technique of camera placement for motion capture simulations pp. 122-123

A. Aissaoui, Z. Baarir, A. Ouafi, P. Pudlo, A. Taleb-Ahmed, C. Gillet and F. Deraz

A qualitative analysis of soft tissue artefact during running pp. 124-125

R. Dumas, V. Camomilla, T. Bonci, L. Cheze and A. Cappozzo

Functionally computed flexion axis reduces kinematic interspecimen variation in experiments pp. 126-127

I. Reichl, U. Leichtle and A. Lorenz

Analysis of long-range autocorrelation series: effect of the number of cycles on statistical precision and sensitivity pp. 128-129

T. Warlop, F. Crevecoeur, B. Bollens, C. Detrembleur and T. Lejeune

Effects of glenohumeral joint centre mislocation on shoulder kinematics and kinetics pp. 130-131

M. Lempereur, F. Leboeuf, S. Brochard and O. Rémy-Néris

Introduction of a set of EMG-based muscular activations in a multi-objective optimisation when solving the muscular redundancy problem during gait pp. 132-133

F. Moissenet, L. Chèze and R. Dumas

Tensile response of the muscle–tendon complex using discrete element model pp. 134-135

A. Roux, J. Lecompte, L.-L. Gras, S. Laporte and I. Iordanoff

Comparison of two MRI sequences for subject-specific 3D thigh muscle reconstruction pp. 136-137

C. Zhang, B. Moal, G. Dubois, J. Raya, V. Lafage and W. Skalli

A method to study 3D knee pseudo-kinematics using low-dose stereoradiography during static squat pp. 138-139

M. Kanhonou, T. Cresson, F. Lavoie, J. Clément, N. Hagemeister and J.A. de Guise

Shuttlecock velocity during a smash stroke in badminton evolves linearly with skill level pp. 140-141

M. Phomsoupha and G. Laffaye

3D measurement of the displacement of the forelimb hoof during stance in three horses circling at the canter on a competition surface pp. 142-143

N. Crevier-Denoix, M. Camus, S. Falala, B. Ravary-Plumioen, M. Pauchard, J. Martino, L. Desquilbet, H. Chateau and P. Pourcelot

Effects of speed on the vertical amplitude of the stride in trotters – comparison between fore- and hindlimbs, and influence of the track surface pp. 144-145

M. Pauchard, H. Chateau, M. Camus, B. Ravary-Plumioen, S. Falala, J. Martino, L. Desquilbet, J.-M. Denoix, P. Pourcelot and N. Crevier-Denoix

Effects of footwear midsole hardness on females' lower limb kinetics and kinematics during cutting manoeuvres pp. 146-147

C. Morio, M. Haddoum, M. Roux and N. Guéguen

Transmission of whole-body vibration to lower limb during dynamic squat exercise pp. 148-149

M. Munera, X. Chiementin, S. Duc and W. Bertucci

Methodological contribution to study the vibratory behaviour of tennis rackets following real forehand drive impact pp. 150-151

T. Creveaux, V. Sevrez, B. Coste and I. Rogowski

Influence of racket on the variability of humerothoracic joint kinematics during tennis serve: a preliminary study pp. 152-153

V. Sevrez, T. Creveaux, R. Dumas, L. Chèze, P. Macé and I. Rogowski

Bilateral comparison of scapulothoracic kinematics during scaption in girl tennis players pp. 154-155

V. Racaud, B. Gillet, Q. Mercier, T. Creveaux, V. Sevrez and I. Rogowski

Swimming drafting simulation using a − ω turbulence model pp. 156-157

A. Arfaoui and G. Polidori

Muscle coordination in loaded squat jump pp. 158-159

C. Giroux, G. Guilhem, D. Chollet and G. Rabita

Validation of a low-cost wearable accelerometer for temporal gait parameter quantification pp. 160-161

K. Ben Mansour, N. Rezzoug, J. Jacquier-Bret and P. Gorce

Analysis of 3D motion patterns with self-organising maps (SOM) and statistical parametric mapping (SPM): a methodological proposal pp. 162-163

B. Serrien, J. Blondeel, R. Clijsen, M. Goossens and J.-P. Baeyens

A preliminary study on the realism of digital human manikins used for ergonomics simulation pp. 164-165

A. Nérot, W. Skalli, G. Beurier and X. Wang

Combined experimental and numerical approach for the assessment of pressure generated by elastic compression bandage pp. 166-167

F. Chassagne, R. Convert, J. Molimard and P. Badel

Is the kinematic of the trunk during the forehand in tennis still disrupted in women at one year postpartum? pp. 168-169

R. Doya, A. Pinti, A. Bourrelly, S. Boudet and E. Watelain

Analysis biomechanics of the 3D angle of the upper limb: study of manual wheelchair obstacle climbing pp. 170-171

C. Marchiori, G. Desroches, D. Gagnon, D. Bensmail and D. Pradon

Does handle shape influence prehensile capabilities and muscle coordination? pp. 172-173

J. Rossi, B. Goislard de Monsabert, E. Berton and L. Vigouroux

A bio-inspired limb controller for avatar animation pp. 174-175

A.L. Cruz Ruiz, C. Pontonnier and G. Dumont

Assessment of a numerical model of balance recovery by stepping pp. 176-177

T. Robert and P. Vallée

ARMA modelling and nonparametric probability density function of gait signal using estimator in patients with neurodegenerative disease pp. 178-179

C. Corbier and M. El Badaoui

Contrasted mediolateral postural control mechanisms in varied foot positions pp. 180-181

Céline Bonnet

Validity of a low-cost wearable device for body sway parameter evaluation pp. 182-183

A. Rouis, N. Rezzoug and P. Gorce

Behaviour of the muscle–tendon unit of the gastrocnemius medialis and tibialis anterior during forward and backward sways pp. 184-185

S. Baudry, J. Johannsson and J. Duchateau

Adapted physical activity intervention and vestibular disorders pp. 186-187

M. Donnard, A. Rahmani, P. Lorin, S. Boyas and B. Beaune

Design of an assistant robot for alignment of fractured bones in medical operations pp. 188-189

M. Selim Cakiroglu, Idris Sancaktar, Mustafa Ulutas and A.H. Ertas

NiTi based stent for the treatment of acute urinary retention due to benign prostatic hyperplasia: a preliminary study on NiTi wires and tubes under pure bending pp. 190-191

G. Antherieu, N. Connesson, Y. Payan, D. Favier and P. Mozer

Finite element modelling of nearly incompressible materials and volumetric locking: a case study pp. 192-193

P.-Y. Rohan, C. Lobos, M. Ali Nazari, P. Perrier and Y. Payan

Volume 17, issue 16, 2014

FE study of bone quality effect on load-carrying ability of dental implants pp. 1751-1761

V. Demenko, I. Linetsky, V. Nesvit, L. Linetska and A. Shevchenko

Finite element study of human lumbar disc nucleus replacements pp. 1762-1776

Hendrik Schmidt, Maxim Bashkuev, Fabio Galbusera, Hans-Joachim Wilke and Aboulfazl Shirazi-Adl

Design of an implant for first metatarsophalangeal hemi-arthroplasty pp. 1777-1784

Atul Kumar, Brian Donley and Peter R. Cavanagh

A centric/non-centric impact protocol and finite element model methodology for the evaluation of American football helmets to evaluate risk of concussion pp. 1785-1800

Andrew Post, Anna Oeur, Evan Walsh, Blaine Hoshizaki and Michael D. Gilchrist

A methodological approach for the biomechanical cause analysis of golf-related lumbar spine injuries pp. 1801-1808

Taeyong Sim, Dong-Jin Jang and Euichaul Oh

Fluid–structure interactions in micro-interlocked regions of the cement–bone interface pp. 1809-1820

Kenneth A. Mann and Mark A. Miller

Effect of exercise on blood flow through the aortic valve: a combined clinical and numerical study pp. 1821-1834

Hamidreza Ghasemi Bahraseman, Kamran Hassani, Mahdi Navidbakhsh, Daniel M. Espino, Zahra Alizadeh Sani and Nasser Fatouraee

A computational study of systemic hydration in vocal fold collision pp. 1835-1852

Pinaki Bhattacharya and Thomas Siegmund

Repeatability and precision of a weighted centroid method for estimating dynamic tibiofemoral surface interactions in sheep pp. 1853-1863

Jillian E. Beveridge, Nigel G. Shrive and Cyril B. Frank

Volume 17, issue 15, 2014

Analysis of the intra-individual differences of the joint surfaces of the calcaneus pp. 1635-1641

Daniel Stephan, Stephanie Panzer, Michael Göttlinger and Peter Augat

Effects of amlodipine and adenosine on coronary haemodynamics: study and numerical simulation pp. 1642-1652

Claudio De Lazzari, Antonio L'Abbate, Mauro Micalizzi, Maria Giovanna Trivella and Danilo Neglia

Identification and characterisation of regional variations in the material properties of ureter according to microstructure pp. 1653-1670

Dimitrios P. Sokolis

Sensitivity analysis of a cemented hip stem to implant position and cement mantle thickness pp. 1671-1684

J. Shi, M. Browne, M. Strickland, G. Flivik and M. Taylor

Biomechanical implications of lumbar spinal ligament transection pp. 1685-1695

Gregory A. Von Forell and Anton E. Bowden

Virtualisation of stress distribution in heart valve tissue pp. 1696-1704

Siyao Huang and Hsiao-Ying Shadow Huang

A two population model of prion transport through a tunnelling nanotube pp. 1705-1715

I.A. Kuznetsov and A.V. Kuznetsov

Evaluation of dentinal fluid flow behaviours: a fluid-structure interaction simulation pp. 1716-1726

Kuo-Chih Su, Shu-Fen Chuang, Eddie Yin-Kwee Ng and Chih-Han Chang

Pulsatile spiral blood flow through arterial stenosis pp. 1727-1737

Fabian Linge, Md Abdul Hye and Manosh C. Paul

Surgeon variability in total knee arthroplasty component alignment: a Monte Carlo analysis pp. 1738-1750

Christopher J. Gatti, Brian R. Hallstrom and Richard E. Hughes

Volume 17, issue 14, 2014

Incorporating measured valve properties into a numerical model of a lymphatic vessel pp. 1519-1534

C.D. Bertram, C. Macaskill and J.E. Moore

The fractal dimension approach in posture: a comparison between Down and Prader–Willi syndrome patients pp. 1535-1541

Veronica Cimolin, Manuela Galli, Chiara Rigoldi, Graziano Grugni, Luca Vismara, Shirley Aparecida Fabris de Souza, Luca Mainardi, Giorgio Albertini and Paolo Capodaglio

A study of gait acceleration and synchronisation in healthy adult subjects pp. 1542-1552

Mitsuru Yoneyama

Finite element analysis of the meniscectomised tibio-femoral joint: implementation of advanced articular cartilage models pp. 1553-1571

Lorenza Mattei, Eleonora Campioni, Mario Alberto Accardi and Daniele Dini

An integrated approach to patient-specific predictive modeling for single ventricle heart palliation pp. 1572-1589

Chiara Corsini, Catriona Baker, Ethan Kung, Silvia Schievano, Gregory Arbia, Alessia Baretta, Giovanni Biglino, Francesco Migliavacca, Gabriele Dubini, Giancarlo Pennati, Alison Marsden, Irene Vignon-Clementel, Andrew Taylor, Tain-Yen Hsia and Adam Dorfman

Nanomechanical properties of mineralised collagen microfibrils based on finite elements method: biomechanical role of cross-links pp. 1590-1601

Abdelwahed Barkaoui and Ridha Hambli

The application of musculoskeletal modeling to investigate gender bias in non-contact ACL injury rate during single-leg landings pp. 1602-1616

Nicholas Ali, Michael Skipper Andersen, John Rasmussen, D. Gordon E. Robertson and Gholamreza Rouhi

Finite element analysis of the biomechanical interaction between coronary sinus and proximal anchoring stent in coronary sinus annuloplasty pp. 1617-1629

Thuy Pham, Milton Deherrera and Wei Sun

Quantification of soft tissue balance in total knee arthroplasty using finite element analysis pp. 1630-1634

Kwang-Jun Oh, Won Man Park, Kyungsoo Kim and Yoon Hyuk Kim

Volume 17, issue 13, 2014

Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol pp. 1403-1417

Marco Piccinini, Joel Cugnoni, John Botsis, Giovanna Zacchetti, Patrick Ammann and Anselm Wiskott

Estimating maximum and psychophysically acceptable hand forces using a biomechanical weakest link approach pp. 1418-1431

Steven L. Fischer, Clark R. Dickerson and Richard P. Wells

A model of the basal ganglia in voluntary movement and postural reactions pp. 1432-1446

Hooshang Hemami and Zahra Moussavi

Analysing gait using a force-measuring walkway: intrasession repeatability in healthy children and adolescents pp. 1447-1451

Louis-Nicolas Veilleux, Laurent Ballaz, Maxime Robert, Martin Lemay and Frank Rauch

The effect of meniscal tears and resultant partial meniscectomies on the knee contact stresses: a finite element analysis pp. 1452-1463

Yuefu Dong, Guanghong Hu, Yinghai Dong, Yang Hu and Qingrong Xu

An iterative learning strategy for the auto-tuning of the feedforward and feedback controller in type-1 diabetes pp. 1464-1482

M.L. Fravolini and P.G. Fabietti

The effect of resorption cavities on bone stiffness is site dependent pp. 1483-1491

Jef Vanderoost and G. Harry van Lenthe

Transformation methods for estimation of subject-specific scapular muscle attachment sites pp. 1492-1501

Bart Bolsterlee and Amir Abbas Zadpoor

Development and validation of a computational model of the knee joint for the evaluation of surgical treatments for osteoarthritis pp. 1502-1517

R. Mootanah, C.W. Imhauser, F. Reisse, D. Carpanen, R.W. Walker, M.F. Koff, M.W. Lenhoff, S.R. Rozbruch, A.T. Fragomen, Z. Dewan, Y.M. Kirane, K. Cheah, J.K. Dowell and H.J. Hillstrom

Volume 17, issue 12, 2014

Force and torque modelling of drilling simulation for orthopaedic surgery pp. 1285-1294

Troy MacAvelia, Ahmad Ghasempoor and Farrokh Janabi-Sharifi

A 3D porous media liver lobule model: the importance of vascular septa and anisotropic permeability for homogeneous perfusion pp. 1295-1310

Charlotte Debbaut, Jan Vierendeels, Jennifer H. Siggers, Rodolfo Repetto, Diethard Monbaliu and Patrick Segers

Embedding of human vertebral bodies leads to higher ultimate load and altered damage localisation under axial compression pp. 1311-1322

Ghislain Maquer, Jakob Schwiedrzik and Philippe K. Zysset

Comparison of various contact algorithms for poroelastic tissues pp. 1323-1334

Fabio Galbusera, Maxim Bashkuev, Hans-Joachim Wilke, Aboulfazl Shirazi-Adl and Hendrik Schmidt

Computer-aided dental prostheses construction using reverse engineering pp. 1335-1346

E. Solaberrieta, R. Minguez, L. Barrenetxea, E. Sierra and O. Etxaniz

Simulation of transcatheter aortic valve implantation: a patient-specific finite element approach pp. 1347-1357

F. Auricchio, M. Conti, S. Morganti and A. Reali

Computational model for simulation of vascular adaptation following vascular access surgery in haemodialysis patients pp. 1358-1367

Simone Manini, Katia Passera, Wouter Huberts, Lorenzo Botti, Luca Antiga and Andrea Remuzzi

A computational study of influence of helmet padding materials on the human brain under ballistic impacts pp. 1368-1382

Mehdi Salimi Jazi, Asghar Rezaei, Ghodrat Karami, Fardad Azarmi and Mariusz Ziejewski

Sensitivity of MRI signal distribution within the intervertebral disc to image segmentation and data normalisation pp. 1383-1390

Julien Gervais, Delphine Périé and Carl-Éric Aubin

Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise: Part I – dynamic test station and human quadriceps dynamic simulator pp. 1391-1401

Kara L. Hall, Chandler A. Phillips, David B. Reynolds, Stanley R. Mohler, Dana B. Rogers and Amy T. Neidhard-Doll

Volume 17, issue 11, 2014

The effect of implant design of linked total elbow arthroplasty on stability and stress: a finite element analysis pp. 1165-1172

Ryan Willing, Graham J.W. King and James A. Johnson

Towards reducing impact-induced brain injury: lessons from a computational study of army and football helmet pads pp. 1173-1184

William C. Moss, Michael J. King and Eric G. Blackman

Development of a 10-year-old paediatric thorax finite element model validated against cardiopulmonary resuscitation data pp. 1185-1197

Binhui Jiang, Libo Cao, Haojie Mao, Christina Wagner, Stan Marek and King H. Yang

Development of a patient-specific anatomical foot model from structured light scan data pp. 1198-1205

Samuel J. Lochner, Jan P. Huissoon and Sanjeev S. Bedi

An augmented Lagrangian finite element formulation for 3D contact of biphasic tissues pp. 1206-1216

Hongqiang Guo and Robert L. Spilker

Generating fibre orientation maps in human heart models using Poisson interpolation pp. 1217-1226

Jonathan Wong and Ellen Kuhl

A novel formulation for scratch-based wear modelling in total hip arthroplasty pp. 1227-1236

Karen M. Kruger, Nishant M. Tikekar, Anneliese D. Heiner, Thomas E. Baer, John J. Lannutti, John J. Callaghan and Thomas D. Brown

A biochemical strategy for simulation of endochondral and intramembranous ossification pp. 1237-1247

Diego A. Garzón-Alvarado

Impedance-based outflow boundary conditions for human carotid haemodynamics pp. 1248-1260

M. Malvè, S. Chandra, A. García, A. Mena, M.A. Martínez, E.A. Finol and M. Doblaré

Deformation of uncemented metal acetabular cups following impaction: experimental and finite element study pp. 1261-1274

Harry S. Hothi, James J.C. Busfield and Julia C. Shelton

Finite element simulations of a hip joint with femoroacetabular impingement pp. 1275-1284

J.P. Jorge, F.M.F. Simões, E.B. Pires, P.A. Rego, D.G. Tavares, D.S. Lopes and A. Gaspar

Volume 17, issue 10, 2014

A mathematical model for cell differentiation, as an evolutionary and regulated process pp. 1051-1070

Pavel A. Prokharau, Fred J. Vermolen and José Manuel García-Aznar

Computational framework to model and design surgical meshes for hernia repair pp. 1071-1085

B. Hernández-Gascón, N. Espés, E. Peña, G. Pascual, J.M. Bellón and B. Calvo

CT-based semi-automatic quantification of vertebral fracture restoration pp. 1086-1095

Gilles Le Pennec, Sophie Campana, Erwan Jolivet, Jean-Marc Vital, Xavier Barreau and Wafa Skalli

Finite element modelling of human auditory periphery including a feed-forward amplification of the cochlea pp. 1096-1107

Xuelin Wang, Liling Wang, Jianjun Zhou and Yujin Hu

Mechanical performance of endodontic restorations with prefabricated posts: sensitivity analysis of parameters with a 3D finite element model pp. 1108-1118

Carmen González-Lluch, Antonio Pérez-González, Joaquín L. Sancho-Bru and Pablo-Jesús Rodríguez-Cervantes

A Lagrangian level set-like method for modelling and simulation in bioengineering pp. 1119-1128

Hicham Mir and Francis Thibault

Subject-specific bone remodelling of the scapula pp. 1129-1143

Carlos Quental, João Folgado, Paulo R. Fernandes and Jacinto Monteiro

New biomechanical model for clinical evaluation of the upper extremity motion in subjects with neurological disorders: an application case pp. 1144-1156

Joan Lobo-Prat, Josep M. Font-Llagunes, Cristina Gómez-Pérez, Josep Medina-Casanovas and Rosa M. Angulo-Barroso

Influence of landmark and surgical variability on virtual assessment of total knee arthroplasty pp. 1157-1164

Y. Dai, J. Seebeck, A.D. Henderson and J.E. Bischoff

Volume 17, issue 9, 2014

Specificity of clinical examinations for testing glenohumeral ligament integrity: a computational study pp. 933-943

Hippolite O. Amadi, Roger J. Emery, Andrew Wallace and Anthony Bull

Stress analysis of a centrally fractured rib fixated by an intramedullary screw pp. 944-957

Petar Liovic, Ilija D. Šutalo and Silvana F. Marasco

Material properties of the placenta under dynamic loading conditions pp. 958-964

Jérémie Pérès, Lionel Thollon, Jérome Delotte, Yannick Tillier, Christian Brunet, Kambiz Kayvantash and Michel Behr

A computational study of injury severity and pattern sustained by overweight drivers in frontal motor vehicle crashes pp. 965-977

Jong-Eun Kim, Il Hwan Kim, Phillip C. Shum, Alan M. Shih, Frank Pintar, Wei Shen, Xiaoguang Ma, Purushottam W. Laud, Steven B. Heymsfield, David B. Allison and Shankuan Zhu

IB–LBM simulation of the haemocyte dynamics in a stenotic capillary pp. 978-985

Xu Yuan-Qing, Tang Xiao-Ying, Tian Fang-Bao, Peng Yu-Hua, Xu Yong and Zeng Yan-Jun

Computational modelling of electrocardiograms: repolarisation and T-wave polarity in the human heart pp. 986-996

Daniel E. Hurtado and Ellen Kuhl

A new cortical thickness mapping method with application to an finite element model pp. 997-1001

Young Ho Kim, Jong-Eun Kim and Alan W. Eberhardt

Nonlinear numerical analysis of the structural response of the intervertebral disc to impact loading pp. 1002-1011

Giacomo Marini and Stephen J. Ferguson

Computer modelling of maximal displacement forces in endoluminal thoracic aortic stent graft pp. 1012-1020

Dejan Krsmanovic, Igor Koncar, Dejan Petrovic, Danko Milasinovic, Lazar Davidovic and Nenad Filipovic

Modelling of global boundary effects on harmonic motion imaging of soft tissues pp. 1021-1031

Xiaodong Zhao and Assimina A. Pelegri

A biomechanical model to simulate the effect of a high vertical loading on trunk flexural stiffness pp. 1032-1041

Sadok Mehrez, Hichem Smaoui and Fatma Z. Ben Salah

Simulation of bone remodelling in orthodontic treatment pp. 1042-1050

Chao Wang, Jingyun Han, Qing Li, Lizhen Wang and Yubo Fan

Volume 17, issue 8, 2014

A multi-scale mechanobiological model of in-stent restenosis: deciphering the role of matrix metalloproteinase and extracellular matrix changes pp. 813-828

Houman Zahedmanesh, Hans Van Oosterwyck and Caitríona Lally

3D finite element models of shoulder muscles for computing lines of actions and moment arms pp. 829-837

Joshua D. Webb, Silvia S. Blemker and Scott L. Delp

Computational analysis of lung deformation after murine pneumonectomy pp. 838-844

Nenad Filipovic, Barry C. Gibney, Dalibor Nikolic, Moritz A. Konerding, Steven J. Mentzer and Akira Tsuda

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty pp. 845-852

A. Roshan-Ghias, A. Terrier, B.M. Jolles and D.P. Pioletti

Single syllable tongue motion analysis using tagged cine MRI pp. 853-864

Devrim Unay, Cengizhan Ozturk and Maureen Stone

Numerical analysis of dynamic temperature in response to different levels of reactive hyperaemia in a three-dimensional image-based hand model pp. 865-874

Hongwei Shao, Ying He and Lizhong Mu

Numerical simulation of the effect of permeability on the hydrodynamics in a parallel-plate coculture flow chamber pp. 875-887

Ye Zeng, Xing-Hong Yao and Xiao-Heng Liu

Segmentation algorithms for ear image data towards biomechanical studies pp. 888-904

Ana Ferreira, Fernanda Gentil and João Manuel R. S. Tavares

Implementation and validation of probabilistic models of the anterior longitudinal ligament and posterior longitudinal ligament of the cervical spine pp. 905-916

W. Loren Francis, Travis D. Eliason, Ben H. Thacker, Glenn R. Paskoff, Barry S. Shender and Daniel P. Nicolella

A nonlinear dynamic finite element approach for simulating muscular hydrostats pp. 917-931

V. Vavourakis, A. Kazakidi, D.P. Tsakiris and J.A. Ekaterinaris

Oscillatory shear stress created by fluid pulsatility versus flexed specimen configurations pp. 932-932

Manuel Salinas, David E. Schmidt, Miguel Libera, Richard R. Lange and Sharan Ramaswamy

Volume 17, issue 7, 2014

Determination of the material parameters of four-fibre family model based on uniaxial extension data of arterial walls pp. 695-703

Lin Li, Xiuqing Qian, Songhua Yan, Lin Hua, Haixia Zhang and Zhicheng Liu

Identification of tissue differentiation rates in a mechanobiological model of fracture healing pp. 704-713

Claudia Eberle and Christoph Ament

Torque-related changes in mechanomyographic intensity patterns for the superficial quadriceps femoris muscles pp. 714-722

Travis W. Beck, Matt S. Stock and Jason M. DeFreitas

Numerical simulation and comparative analysis of flow field in axial blood pumps pp. 723-727

Yuhua Peng, Yaqin Wu, Xiaoying Tang, Weifeng Liu, Duanduan Chen, Tianxin Gao, Yong Xu and Yanjun Zeng

Oscillatory shear stress created by fluid pulsatility versus flexed specimen configurations pp. 728-739

Manuel Salinas, David E. Schmidt, Miguel Libera, Richard R. Lange and Sharan Ramaswamy

Numerical simulation of blood flow in the left ventricle and aortic sinus using magnetic resonance imaging and computational fluid dynamics pp. 740-749

Mir-Hossein Moosavi, Nasser Fatouraee, Hamid Katoozian, Ali Pashaei, Oscar Camara and Alejandro F. Frangi

A pre-operative planning for endoprosthetic human tracheal implantation: a decision support system based on robust design of experiments pp. 750-767

O. Trabelsi, J.L. López Villalobos, A. Ginel, E. Barrot Cortes and M. Doblaré

Distribution and variability study of the femur cortical thickness from computer tomography pp. 768-786

Antoine Serrurier, Erwan Jolivet, Sergio Quijano, Patricia Thoreux and Wafa Skalli

Multi-scale finite element modelling at the posterior lumbar vertebra: analysis of pedicle stresses due to pars fracture pp. 787-791

Serkan İnceoğlu and Prasath Mageswaran

Sorting of cargos between axons and dendrites: modelling of differences in cargo transport in these two types of neurites pp. 792-799

A.V. Kuznetsov

Meshless algorithm for soft tissue cutting in surgical simulation pp. 800-811

Xia Jin, Grand Roman Joldes, Karol Miller, King H. Yang and Adam Wittek

Volume 17, issue 6, 2014

A visco-elastic model for the prediction of orthodontic tooth movement pp. 581-590

An Van Schepdael, Kris De Bondt, Liesbet Geris and Jos Vander Sloten

Non-steady peristaltic propulsion with exponential variable viscosity: a study of transport through the digestive system pp. 591-603

Dharmendra Tripathi, S.K. Pandey, Abdul Siddiqui and O. Anwar Bég

Improved discretisation and linearisation of active tension in strongly coupled cardiac electro-mechanics simulations pp. 604-615

J. Sundnes, S. Wall, H. Osnes, T. Thorvaldsen and A.D. McCulloch

Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses pp. 616-622

Tong Li, Y.T. Gu, Adekunle Oloyede and Prasad K.D.V. Yarlagadda

Asymmetric viscoelastic flow through a porous channel with expanding or contracting walls: a model for transport of biological fluids through vessels pp. 623-631

Si Xinhui, Zheng Liancun, Zhang Xinxin, Si Xinyi and Li Min

Three-dimensional pore-scale modelling of dentinal infiltration pp. 632-642

E. Vennat, J.-P. Attal, D. Aubry and M. Degrange

Quantification of new structural features of coronary plaques by computational post-hoc analysis of virtual histology-intravascular ultrasound images pp. 643-651

Theodore G. Papaioannou, Dimitrios Schizas, Manolis Vavuranakis, Ourania Katsarou, Dimitrios Soulis and Christodoulos Stefanadis

Validation of composite finite elements efficiently simulating elasticity of trabecular bone pp. 652-660

Lars Ole Schwen and Uwe Wolfram

Reaction–diffusion wave model for self-assembled network formation of poly(dA)·poly(dT) DNA on mica and HOPG surfaces pp. 661-677

Kentaro Doi, Yukihiro Toyokita, Shingo Akamatsu and Satoyuki Kawano

Computational modelling and analysis of mechanical conditions on cell locomotion and cell–cell interaction pp. 678-693

S.J. Mousavi, M.H. Doweidar and M. Doblaré

Cellular and biomolecular mechanics and mechanobiology pp. 694-694

Cees Oomens

Volume 17, issue 5, 2014

An innovative numerical approach to resolve the pulse wave velocity in a healthy thoracic aorta model pp. 461-473

An-Shik Yang, Chih-Yung Wen, Li-Yu Tseng, Chih-Chieh Chiang, Wen-Yih Isaac Tseng and Hsi-Yu Yu

Evaluation of posture signal using entropy analysis and fractal dimension in adults with Down syndrome pp. 474-479

C. Rigoldi, M. Galli, L. Mainardi and G. Albertini

Subject-specific musculoskeletal model of the lower limb in a lying and standing position pp. 480-487

J. Hausselle, A. Assi, A. El Helou, E. Jolivet, H. Pillet, E. Dion, D. Bonneau and W. Skalli

The modelling of interactions between organs and medical tools: a volumetric mass-spring chain algorithm pp. 488-496

Yasin Cicek and Alpaslan Duysak

On the importance of modelling organ geometry and boundary conditions for predicting three-dimensional prostate deformation pp. 497-506

Alex Jahya, Martijn G. Schouten, Jurgen J. Fütterer and Sarthak Misra

Can one angle be simply subtracted from another to determine range of motion in three-dimensional motion analysis? pp. 507-515

Benjamin Michaud, Monique I. Jackson, François Prince and Mickaël S. Begon

Finite element modelling of implant designs and cortical bone thickness on stress distribution in maxillary type IV bone pp. 516-526

Chou I-Chiang, Lee Shyh-Yuan, Wu Ming-Chang, Chia-Wei Sun and Cho-Pei Jiang

Mechanical action of the blood onto atheromatous plaques: influence of the stenosis shape and morphology pp. 527-538

Tristan Belzacq, Stéphane Avril, Emmanuel Leriche and Alexandre Delache

Image interpolation allows accurate quantitative bone morphometry in registered micro-computed tomography scans pp. 539-548

Friederike A. Schulte, Floor M. Lambers, Thomas L. Mueller, Martin Stauber and Ralph Müller

Numerical investigation of oxygen mass transfer in a helical-type artery bypass graft pp. 549-559

Tinghui Zheng, Jun Wen, Wentao Jiang, Xiaoyan Deng and Yubo Fan

Patient-specific acetabular shape modelling: comparison among sphere, ellipsoid and conchoid parameterisations pp. 560-567

Pietro Cerveri, Alfonso Manzotti and Guido Baroni

Virtual human hand: model and kinematics pp. 568-579

Esteban Peña-Pitarch, Neus Ticó Falguera and Jingzhou (James) Yang

Volume 17, issue 4, 2014

Grasp modelling with a biomechanical model of the hand pp. 297-310

Joaquín L. Sancho-Bru, Marta C. Mora, Beatriz E. León, Antonio Pérez-González, José L. Iserte and Antonio Morales

A comparative study of muscle force estimates using Huxley's and Hill's muscle model pp. 311-317

Michala Cadova, Miloslav Vilimek and Matej Daniel

Self-expanding stent modelling and radial force accuracy pp. 318-333

Ríona Ní Ghriallais and Mark Bruzzi

Simulation study of pO distribution in induced tumour masses and normal tissues within a microcirculation environment pp. 334-343

Mao Li, Yan Li and Peng (Paul) Wen

Influence of a postural change of the swimmer's head in hydrodynamic performances using 3D CFD pp. 344-351

Catalin Viorel Popa, Ahlem Arfaoui, Stéphane Fohanno, Redha Taïar and Guillaume Polidori

Influence of altered gait patterns on the hip joint contact forces pp. 352-359

Alessandra Carriero, Amy Zavatsky, Julie Stebbins, Tim Theologis, Gerlinde Lenaerts, Ilse Jonkers and Sandra J. Shefelbine

Evaluating knee replacement mechanics during ADL with PID-controlled dynamic finite element analysis pp. 360-369

Clare K. Fitzpatrick, Mark A. Baldwin, Chadd W. Clary, Lorin P. Maletsky and Paul J. Rullkoetter

Development and validation of a multi-body model of the canine stifle joint pp. 370-377

Antonis P. Stylianou, Trent M. Guess and James L. Cook

Validation of radiocarpal joint contact models based on images from a clinical MRI scanner pp. 378-387

Joshua E. Johnson, Terence E. McIff, Phil Lee, E. Bruce Toby and Kenneth J. Fischer

Upper limb kinematical analysis of an elite weight lifter in the squat snatch pp. 388-394

Gang Tang, Liwei Qian, Dongmei Wang, Gaofeng Wei, Daofang Chang, Chengtao Wang and Weijian Mi

Biomechanical behaviour of ankle ligaments: constitutive formulation and numerical modelling pp. 395-404

A. Forestiero, E.L. Carniel and A.N. Natali

An investigation into the use and limitations of different spatial integration schemes and finite element software in head impact analyses pp. 405-415

Katrien Baeck, Jan Goffin and Jos Vander Sloten

Zeroing of six-component handrim dynamometer for biomechanical studies of manual wheelchair locomotion pp. 416-422

Christophe Sauret, Michel Dabonneville, Yves Couétard, Nicolas de Saint Rémy, Philippe Kauffmann, Mariano Cid and Philippe Vaslin

The effects of slip velocity on a micropolar fluid through a porous channel with expanding or contracting walls pp. 423-432

Si Xinhui, Zheng Liancun, Chen Xuehui, Zhang Xinxin, Cao Limei and Li Min

Homotopy semi-numerical simulation of peristaltic flow of generalised Oldroyd-B fluids with slip effects pp. 433-442

Dharmendra Tripathi, O. Anwar Bég and J.L. Curiel-Sosa

Importance of diameter-to-length ratio in selecting dental implants: a methodological finite element study pp. 443-449

V. Demenko, I. Linetskiy, K. Nesvit, H. Hubalkova, V. Nesvit and A. Shevchenko

Evaluation of a transient, simultaneous, arbitrary Lagrange–Euler based multi-physics method for simulating the mitral heart valve pp. 450-458

Daniel M. Espino, Duncan E.T. Shepherd and David W.L. Hukins

Corrigendum pp. 459-459

Matthew Downs

Volume 17, issue 3, 2014

Modelling intravascular delivery from drug-eluting stents with biodurable coating: investigation of anisotropic vascular drug diffusivity and arterial drug distribution pp. 187-198

Xiaoxiang Zhu, Daniel W. Pack and Richard D. Braatz

A simple approach to guide factor retention decisions when applying principal component analysis to biomechanical data pp. 199-203

Steven L. Fischer, Robin H. Hampton and Wayne J. Albert

Can a partial volume edge effect reduction algorithm improve the repeatability of subject-specific finite element models of femurs obtained from CT data? pp. 204-209

Eran Peleg, Ryan Herblum, Maarten Beek, Leo Joskowicz, Meir Liebergall, Rami Mosheiff and Cari Whyne

Computation of fractal features based on the fractal analysis of surface Electromyogram to estimate force of contraction of different muscles pp. 210-216

Sridhar Poosapadi Arjunan and Dinesh Kant Kumar

Work partitioning of transversally loaded muscle: experimentation and simulation pp. 217-229

Tobias Siebert, Olaf Till and Reinhard Blickhan

Micro-mechanical damage of trabecular bone–cement interface under selected loading conditions: a finite element study pp. 230-238

Qing-Hang Zhang, Gianluca Tozzi and Jie Tong

On high-cycle fatigue of 316L stents pp. 239-250

Olga Barrera, Ahmed Makradi, Mohammed Abbadi, Mohamed Azaouzi and Salim Belouettar

A computational model to describe the collagen orientation in statically cultured engineered tissues pp. 251-262

A.L.F. Soares, C.W.J. Oomens and F.P.T. Baaijens

Numerical simulation of the insertion process of an uncemented hip prosthesis in order to evaluate the influence of residual stress and contact distribution on the stem initial stability pp. 263-276

Aida Georgeta Monea, Leonard Cezar Pastrav, Michiel Mulier, Georges Van der Perre and Siegfried V. Jaecques

Patient-specific simulation of a stentless aortic valve implant: the impact of fibres on leaflet performance pp. 277-285

F. Auricchio, M. Conti, A. Ferrara, S. Morganti and A. Reali

Numerical simulation of the remodelling process of trabecular architecture around dental implants pp. 286-295

Chao Wang, Lizhen Wang, Xiaoyu Liu and Yubo Fan

Spatial variation of permittivity of an electrolyte solution in contact with a charged metal surface: a mini review pp. 296-296

E. Gongadze, U. van Rienen, V. Kralj-Iglič and A. Iglič

Volume 17, issue 2, 2014

Medical image registration: a review pp. 73-93

Francisco P.M. Oliveira and João Manuel R.S. Tavares

The effect of calcification on the structural mechanics of the costal cartilage pp. 94-107

Jason L. Forman and Richard W. Kent

Impact of plaques in the left coronary artery on wall shear stress and pressure gradient in coronary side branches pp. 108-118

Thanapong Chaichana, Zhonghua Sun and James Jewkes

Acoustic reflectometry for an model of a human upper airway using sinusoidal wave packets and the Ware–Aki algorithm pp. 119-127

E.R. Vazquez and J.H. Pierluissi

Towards automatic measurement of anteversion and neck–shaft angles in human femurs using CT images pp. 128-136

Mariano E. Casciaro and Damian Craiem

Validation of a full body finite element model (THUMS) for running-type impacts to the lower extremity pp. 137-148

Alison Schinkel-Ivy, William J. Altenhof and David M. Andrews

Development of a finite element/multi-body model of a newborn infant for restraint analysis and design pp. 149-162

Matthew Bondy, William Altenhof, Xilin Chen, Anne Snowdon and Brenda Vrkljan

A biomechanical model to assess the contribution of pelvic musculature weakness to the development of stress urinary incontinence pp. 163-176

Clare Yip, Ezra Kwok, Farrokh Sassani, Roy Jackson and Geoffrey Cundiff

A system for predicting and preventing work-related musculoskeletal disorders among dentists pp. 177-185

Bhornsawan Thanathornwong, Siriwan Suebnukarn, Yupin Songpaisan and Kan Ouivirach

Volume 17, issue 1, 2014

Microscale modelling in biomechanics and mechanobiology pp. 1-1

Helder C. Rodrigues

An experimental and computational analysis of primary cilia deflection under fluid flow pp. 2-10

Matthew E. Downs, An M. Nguyen, Florian A. Herzog, David A. Hoey and Christopher R. Jacobs

Stress and strain localization in stretched collagenous tissues via a multiscale modelling approach pp. 11-30

Michele Marino and Giuseppe Vairo

Adaptive diffuse domain approach for calculating mechanically induced deformation of trabecular bone pp. 31-38

S. Aland, C. Landsberg, R. Müller, F. Stenger, M. Bobeth, A.C. Langheinrich and A. Voigt

cell–matrix mechanics in tendon fascicles and seeded collagen gels: implications for the multiscale design of biomaterials pp. 39-47

Neil A. Duncan, Sabina B. Bruehlmann, Christopher J. Hunter, Xinxin Shao and Elizabeth J. Kelly

Layered water in crystal interfaces as source for bone viscoelasticity: arguments from a multiscale approach pp. 48-63

Lukas Eberhardsteiner, Christian Hellmich and Stefan Scheiner

Intercellular communication via gap junctions affected by mechanical load in the bovine annulus fibrosus pp. 64-71

Jane Desrochers and Neil A. Duncan