Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 22, issue S1, 2019

Correction: 44th Congress of the Société de Biomécanique pp. S1-S1

The Editors

Avineck, the neck of the bird, an arm for the robots pp. S2-S3

A. Abourachid and P. Wenger

Use of a parametric finite element model of the mitral valve to assess healthy and pathological valve behaviors pp. S4-S5

T. Alleau, L. Lanquetin and A.-V. Salsac

Semi-automatic positioning of foot bones on X-Ray computed tomography images for bare vs shod foot comparison pp. S9-S10

N. Kroupa, B. Pierrat, W.-S. Han, S. Grange, F. Bergandi and J. Molimard

A mechatronic simulator for learning surgical procedures pp. S11-S13

C. Brèque, J. Danion, E. Oriot, T. Vendeuvre, J. P Faure, G. Donatini, D. Oriot and J. P Richer

Experimental protocol to evaluate lung parenchyma properties under inflation pp. S14-S16

T. Pallière, A. Lanel, A. Bel-Brunon, K. Bruyère-Garnier, N. Biboulet and T. Lubrecht

Biomechanical consequences of lumbar belt design for the therapeutic treatment of low back pain pp. S17-S19

J. Molimard, W.-S Han, B. Pierrat, R. Pannetier and R. Convert

Combining precision and power to maximize performance: a case study of the woodpecker’s neck pp. S20-S21

C. Böhmer, M. Furet, B. Fasquelle, P. Wenger, D. Chablat, C. Chevallereau and A. Abourachid

Computational modeling of arterial tissues: coupling multiscale homogenization strategies and finite element formulation pp. S22-S24

Daniele Bianchi, Claire Morin and Pierre Badel

Impact of collateral flow on true FFR prediction for left main coronary stenoses with downstream lesions pp. S25-S27

M. Lagache, R. Coppel, G. Finet, M. Malvé, R. I. Pettigrew and J. Ohayon

Late thoracic aorta remodeling in endovascular treatment of aneurysmal disease pp. S28-S30

M. De Masi, C. Guivier-Curien, P. Piquet and V. Deplano

Additive manufactured titanium for prosthetic application in dentistry: surface topography characterization and in vitro cellular response of human gingival fibroblasts (HGFs) pp. S31-S32

M. J. Crenn, A. Benoit, G. Rohman, T. Guilbert, C. Chaussain, O. Fromentin, J. P. Attal and C. Bardet

Influence of the relative humidity on dentin mechanical properties pp. S33-S34

W. Wang, H. Gharbi, E. Vennat and J.-M Allain

Tongue re-education with tongue right positioner to close anterior open bite: a case reports study pp. S35-S36

C. Mauclaire, F. Behar, N. Tonogi, A. Belattar, F. Vanpoulle and Y. Saint-Georges-Chaumet

Effects of repetitive magnetic cervical stimulation of phrenic roots on diaphragmatic function in healthy volunteers pp. S37-S38

Y. Rebollar, M. Bourgoin-Heck, C. Rault, S. Ragot, F. Petitpas, R. Robert, R. Coudroy, J.-P Frat, A.-W Thille, X. Drouot and V. Diaz

Mechanical properties of the human periosteum in the mandibular ostegenesis context pp. S39-S41

J. Dallard, A. Debelmas, S. Asiri, N. Kogane, A. Picard, N. Kadlub and J. Boisson

Measurement of strain localization in cancellous bone tissues using H-DVC method pp. S42-S44

P. Bokam, V. Valle, P. Rigoard, T. Vendeuvre and A. Germaneau

Patient-specific physiological model of the respiratory system based on inverse finite element analysis: a comparative study pp. S45-S47

H. Ladjal, M. Giroux, M. Beuve, P. Giraud and B. Shariat

Finite element model to predict bone loss around dental implant pp. S48-S50

A. Ramos and M. Mesnard

Human cardiomyocytes derived from induced pluripotent stem cells pp. S53-S54

C. Steichen, M. Jacquard-Fevai, S. Brishoual and T. Hauet

Reduced order model for patient specific fluid transient simulation of blood flow in aortic cross pp. S55-S57

C. Shao, J. Tomasi, V. Morgenthaler, M. Lederlin, J. P. Verhoye and P. Haigron

Correlation between wall shear stress and wall rupture properties in ascending thoracic aortic aneurysms pp. S58-S59

Jayendiran Raja, Francesca Condemi, Salvatore Campisi, Magalie Viallon, Pierre Croisille and Stéphane Avril

A preliminary approach in the prediction of orthodontic bone remodeling by coupling experiments, theory and numerical models pp. S60-S61

Daniel George, Delphine Wagner, Yves Bolender, Pascal Laheurte, Boris Piotrowski, Paul Didier, Morad Bensidhoum, Valentin Herbert, Camille Spingarn and Yves Rémond

MARIO: the first chewing bench used for ageing and analysis the released compounds of dental materials pp. S62-S64

C. Jeannin, K. Gritsch, J. J. Liodénot and B. Grosgogeat

Determination of the filler-matrix interface strength of dental composites from bending tests pp. S65-S67

Y. Boussès, N. Brulat-Bouchard and Y. Tillier

New “ductile” zirconia-based ceramics for the development of dental implants pp. S68-S70

H. Reveron, A. Liens, J. Chevalier, M. Fornabaio, P. Palmero, L. Montanaro, T. Fürderer, S. Schomer, E. Adolfsson and N. Courtois

Left ventricle vortex detection by 3D + t phase contrast MRI: a feasibility study pp. S71-S73

M. Evin, F. Callaghan, D. F. Fletcher and S. M. Grieve

An enriched continuum mechanics description of bone tissue to describe mineralization and mechanobiology in bone remodeling pp. S74-S75

M. Martin, P. Pivonka, G. Haïat, V. Sansalone and T. Lemaire

Comparing quantitative ultrasound and resonance frequency analysis to evaluate dental implant stability pp. S76-S77

R. Vayron, V. H. Nguyen and G. Haiat

Reaching a good agreement between computational hemodynamics results and in vitro data is not enough pp. S78-S79

F. Nicoud, V. Zmijanovic and S. Mendez

Look into a fish mouth: 3D X-ray particle tracking adapted to intra-oral hydrodynamics in fish feeding pp. S80-S81

P. Provini, A. Brunet and S. Van Wassenbergh

Muscle recruitment pattern of primates (bipedal vs quadrupedal): is it different to other quadrupedal mammals? pp. S82-S83

F. Druelle, P. Aerts, K. D’Août, R. Lacoste, P. Molina Vila, B. Rimbaud and G. Berillon

Finite element model of a human lateral semicircular canal of the inner ear pp. S84-S86

D. Baumgartner, A. Charpiot and M. Lamy

Evolution of the activity of the masticatory muscles before and after temporomandibular joint replacement: a clinical and functional study pp. S87-S89

E. Sapin-de Brosses, A.-S Bonnet and N. Zwetyenga

Morphology and mechanics of dentin using FIB-SEM pp. S90-S92

E. Vennat, A. Hemmati, T. Reiss, E. Héripré, U. Muendi, E. Dursun and N. Schmitt

Stress effects of the cerebrospinal pulsatile flow on the spinal cord by a 3D fluid-structure modeling pp. S93-S95

P. Sudres, P. J. Arnoux and M. Evin

Biomechanical properties of the human mandibular cadaveric bone related to ramus sagittal osteotomy pp. S96-S98

G. Rougier, N. Kogane, J. Dallard, F. Mangione, L. Slimani, B. Salmon, N. Thurieau, L. Cherfa, N. Kadlub, J. Boisson and F. Szmytka

How can flow dynamics predict clinical evolution of residual type B aortic dissection? pp. S99-S101

F. Khannous, M. Gaudry, C. Guivier-Curien, P. Piquet and V. Deplano

Effect of the number of interference screws for the fixation of an intra-articular cranial cruciate ligament prosthesis in dogs: Biomechanical study pp. S102-S104

Q. Blanc, B. Goin, P. Rafael, P. Moissonnier, C. Carozzo, P. Buttin, T. Cachon and E. Viguier

Sizing of inertial sensors adapted to measurement of locomotor parameters in horses using motion capture pp. S105-S106

M. Sapone, P. Martin, H. Chateau, J. Parmentier, K. Ben Mansour and F. Marin

Intraventricular vector flow mapping by 3-D doppler echo pp. S107-S108

F. Vixege, P.y Courand, F. Nicoud, D. Vray and D. Garcia

Biomechanical analysis of a ligament fixation system for CCL reconstruction in a canine cadaver model pp. S109-S111

B. Goin, P. Rafael, Q. Blanc, T. Cachon, P. Buttin, C. Carozzo, P. Chabrand and E. Viguier

Study of flapping wings to identify best performance conditions pp. S112-S114

D. Diaz, L. David, F. Pons, T. Jardin and N. Gourdain

Patient-specific hemodynamics simulations: model parameterization from clinical data to enable interventional planning pp. S115-S116

Irene E. Vignon-Clementel and Sanjay Pant

Power and limit of MRI to investigate blood and cerebro spinal fluid dynamics in the cranio spinal system pp. S117-S118

O. Balédent

Reduced models for computing pressure drop across stenosis pp. S119-S120

J. Ventre, J.-M. Fullana, P.-Y. Lagrée, F. Raimondi and N. Boddaert

Flow disturbance around dynamically interacting aortic junctions pp. S121-S122

A. I. Barakat, G. Vilaplana and T. Seo

Morphometric dimensions of the goat thoracolumbar vertebrae using digitized CT images pp. S123-S125

T. Cachon, R. Hassoun, M. Odet, M. Massenzio, C. Carozzo, S. Ronel, Y. Lafon and E. Viguier

Kinetics and distal limb kinematics of the forelimb of 3 jumping horses at landing after a jump: effects of the fence’s height pp. S126-S128

N. Crevier-Denoix, F. Munoz-Nates, M. Camus, B. Ravary-Plumioen, A. Van Hamme, C. Litaise, A.-L Emond, L. Beaud, J.-M Denoix, H. Chateau and P. Pourcelot

Effect of collagen network orientation on the cervical intervertebral disc response to flexion load pp. S129-S131

M. A. Chetoui, D. Ambard, P. Royer and S. Le Floc’h

The torsion of tibial tuberosity, a new factor of patellar instability pp. S132-S134

V. Chassaing, N. Courilleau, J. L. Blin, F. Khiami, J. M. Zeitoun, E. Decrette, T. Vendeuvre and C. Brèque

Mismatch between rod bending and actual post-operative lordosis in short lumbar arthrodesis with poly axial screws pp. S135-S137

A. Moufid, T. Cloche, S. Ghailane, A. Ounajim, T. Vendeuvre and O. Gille

Personalized finite element model for full weight-bearing after tibial plateau fracture surgery pp. S138-S140

K. Aubert, A. Germaneau, M. Rochette, P. Rigoard and T. Vendeuvre

EMG measurements as inputs for a musculoskeletal model: quantification of abdominal and back muscle forces in static postures pp. S141-S143

S. Hinnekens, P. Mahaudens, C. Detrembleur and P. Fisette

Comparative biomechanical study of tibial eminence fracture type III: Pullup® versus screws pp. S144-S145

P. Pennequin, J.-B Pic, C. Breque, P. Bouget, J.-P Richer, L.-E Gayet, P. Rigoard and T. Vendeuvre

Comparative biomechanical analysis of instrumental fixations of the degenerative thoracic spine: large diameter optimized screw versus cemented screw with standard diameter pp. S146-S148

J-E Loret, P. Cam, C. Peltier, C. Breque, P. Rigoard and T. Vendeuvre

The biomechanical differences in the treatment of posteromedial Tibial Plateau fractures (Moore I) between the use of screws compared to endobutton. A cadaveric study pp. S149-S150

K. El-Youssef, L. Poirier, A. Zaher, J.-B Pic, C. Brèque, P. Rigoard and T. Vendeuvre

Using musculoskeletal modelling to clarify the effect of wrist posture on muscle force-generating capacities and maximal grip force during a power grip task pp. S151-S153

M. Caumes, B. Goislard de Monsabert, H. Hauraix, E. Berton and L. Vigouroux

High-heel shoes wear affects postural control during gait initiation in healthy young female adults pp. S154-S156

A. Delafontaine, P. Fourcade, G. Oustau, S. Ditcharles and E. Yiou

Evolution of mechanical fields during the gait cycle in healthy and implanted femoral bones pp. S157-S159

Z. S. Hadiji, A. Wit, C. Dreistadt, S. Wronski, P. Lipinski and J. Tarasiuk

Modeling human gait cycle using FE method and results of backward kinematics pp. S160-S162

A. Wit, S. Wronski, J. Tarasiuk, Z. S. Hadiji, P. Lipinski and C. Dreistadt

Medio-lateral stability in induced asymmetric walking pp. S163-S165

T. Robert, S. Nadeau and R. Aissaoui

Pelvis and hip calibration methods for movement analysis with inertial sensors pp. S166-S168

L. Pacher, L. Fradet, Y. Tarent, M. Retailleau, F. Colloud, C. Chatellier and R. Vauzelle

Reliability of the head tracking measured by Microsoft Hololens during different walking conditions pp. S169-S171

A. L. Guinet, G. Bouyer, S. Otmane and E. Desailly

Assessment of the thigh skin and fascia strains during knee flexion-extension: an ex-vivo study pp. S172-S174

Y. Sednieva, K. Bruyère-Garnier, A. Naaim, A. Viste and L.l Gras

Case study: biomechanical analysis of trunk stability in two modes of propulsion of manual wheelchair during start and stabilized speed pp. S175-S176

M. Astier, A. Faupin, C. Sauret and J. Bascou

Influence of ankle joint model on lower limbs kinematics and kinetics during table tennis forehand drive pp. S177-S179

T. Marsan, P. Rouch, P. Thoreux, R. Jacquet-Yquel and C. Sauret

Distribution of intervertebral compression and shear forces in the cervical spine during isometric tasks pp. S180-S182

B. Fréchède, R. Kamalifard and R. Dumas

Experimental evaluation of the forefinger maximum bending moments pp. S183-S185

Khouloud Achouri, Nathanael Connesson, Grégory Chagnon, Julien Gerbelot and Aurélien Courvoisier

Whole-body angular momentum during step initiation in young and older adults pp. S186-S187

J. Begue, N. Peyrot, G. Dalleau and T. Caderby

Effect of age on hand drawing movement kinematics pp. S188-S190

T. Dhieb, N. Rezzoug, H. Boubaker, P. Gorce and A. M. Alimi

The effect of rectus femoris muscle modelling technique on knee joint kinematics: a preliminary study pp. S191-S193

E. Elyasi, A. Perrier and Y. Payan

Redundancy tubes: modelling individual and group range-of-motions along a path pp. S194-S196

J. K. Pickard, N. Rezzoug, P. Gorce and D. Daney

Gait analysis on chronic Low Back Pain clusters before rehabilitation program: Kinematic and kinetic approaches - pp. S197-S198

Y. Delpierre, G. Audat and C. Garnier

Why introducing biomechanical considerations into obstetrical management of women from pregnancy to delivery? pp. S199-S200

B. Gachon and D. Desseauve

Development of a surrogate limb model for knee brace evaluation pp. S201-S202

A. Bacher, A. Nerot, A. Valgalier, A. Thouze and X. Bonnet

Changes in shoulder muscle geometry at different level of isometric contraction pp. S203-S205

M. Hoffmann, M. Begon, R. Abdelnour and S. Duprey

Non-invasive thoracic and lumbar spine range of motion by motion acquisition system pp. S206-S208

J. Mignot, V. Callot, A. Melot, P.-J Arnoux and M. Evin

Biomechanical characterization of human small bowel wall under inflation conditions pp. S209-S211

Y. Goudard, C. Masson, Y. Ammar and T. Bège

Medial-lateral margin of stability for the comparison of two bone-anchored prostheses – a case study pp. S212-S213

V. Gibeaux, A. Naaim, T. Robert, L. Frossard and R. Dumas

Impact of a passive dynamic ankle foot orthosis on gait: Patients with dorsiflexion deficit pp. S214-S215

C. Adel, R. Taiar, G. Belassian, D. Lamarre, H. Teyssedre, J. Dumont, A. Schneider, Y. Benabid, A. Chene, E. Abdi and F. C. Boyer

Muscle coordination during robotic assisted walking using Lokomat pp. S216-S218

Y. Cherni, M. Hajizadeh, M. Begon and N.a Turpin

Influence of fear on the head kinematic under dynamic solicitations pp. S219-S220

B. Sandoz, J. Chalhoub, C. Di Loreto, S. Laporte and P.-P. Vidal

Investigating symmetry in amputee gait through the improved harmonic ratio: influence of the stride segmentation method pp. S221-S223

E. Simonetti, H. Pillet, G. Vannozzi, I. Loiret, C. Villa, J. Bascou and E. Bergamini

Head dynamics during emergency braking events pp. S224-S226

C. Di Loreto, J. Dutschke, M. Forrest, A. Van Den Berg, J. Chardonnet, F. Mérienne, J. Mackenzie and B. Sandoz

Short-term effects of thoracic spine manipulation on the biomechanical organisation of gait initiation: a pilot randomized study pp. S227-S229

S. Ditcharles, E. Yiou, A. Delafontaine and A. Hamaoui

Intervertebral forces computation: a non-invasive validation method pp. S230-S232

G. Abedrabbo, P. Mahaudens, C. Detrembleur, M. Mousny and P. Fisette

Benefits of a musculoskeletal modelling decision making procedure on hamstring lengthening outcomes: a retrospective study pp. S233-S234

E. Desailly and N. Khouri

Effect of unilateral femoral derotation osteotomy on transverse plane kinematics of children and adolescents with cerebral plasy pp. S235-S237

E. Desailly, A. Badina and N. Khouri

Does shoe heel-to-toe drop have an influence on performance in downhill trail running? pp. S238-S239

Thomas Defer, Robin Juillaguet, Marlène Giandolini, Sebastien Pavailler, Nicolas Horvais, Johan Cassirame and Gregory Doucende

Bow camber and mass distribution: violinist’s preferences and sound descriptors pp. S240-S242

A. Tomezzoli, B. Michaud, M. Begon and S. Duprey

Biomechanical modeling of the diabetic foot ulcer risk to guide surgery pp. S243-S244

A. Perrier, L. Gatin, M. Bucki, A. Geffrier, P. Denormandie and Y. Payan

Femoral residuum/socket kinematics using fusion between 3D motion capture and stereo radiography pp. S245-S247

B. Panhelleux, N. Fourgeron, N. Ruyssen, P. Y. Rohan, X. Bonnet and H. Pillet

A numerical analysis of the risk of rib fractures during blunt ballistic impacts on a human thorax pp. S248-S250

A. Bracq, C. Maréchal, R. Delille, B. Bourel, F. Lauro, S. Roth and O. Mauzac

In-vivo precision of a non-invasive ultrasound-based device to measure pelvic tilt for THA pp. S251-S252

A. Guezou-Philippe, G. Dardenne, J.-P Pluchon, H. Letissier, R. Gérard, C. Lefèvre and E. Stindel

On-body sensors for ergonomic analysis: influence of supports for order picking pp. S253-S254

C. Besombes, C. Castanier and N. Vignais

Insights into the effect of a craniotomy on the impact resistance of the skull pp. S255-S256

A. Siegel, F. Sauter-Starace and S. Laporte

Use of FeetMe monitor® connected soles for real-time measurement of spatial and temporal walking parameters: an illustrative case from the REWALK pilot study highlighting the objectivity of a spastic hemiparetic patient assessment pp. S257-S259

R. David, M. Billot, L. Delaire, M. Roulaud, B. Lorgeoux, P. Foucault, F. Louis, E. Duprey, R. Lapoulvereyrie, H. Meklat, C. Visentin, L. Cognon, A. Germaneau, T. Vendeuvre and P. Rigoard

Cancer cell microrheology using AFM pp. S260-S261

C. Verdier, Y. Abidine, V. M Laurent and A. Duperray

Role of mechanobiology and biomechanics in cancer: from cells to tissues pp. S262-S263

D. Weihs

Kinematic analysis of the speed climbing event at the 2018 Youth Olympic Games pp. S264-S266

P. Legreneur, I. Rogowski and T. Durif

Sport-related impact classification through a convolutional neural network pp. S267-S269

R. Trama, C. Hautier and Y. Blache

Influence of continuous vs. intermittent static stretching on repeated jump performance pp. S270-S272

Q. Bretonneau, C. Faucher, D. Theurot, R. Goenarjo, A. Debray, M. Tanneau and M. Phomsoupha

A modelisation of quantification of head and neck risks associated with tackles in rugby union pp. S273-S275

L. Cogoluenhes, M. Evin, A. Forodighasemabadi, W. Wei, L. Thollon and M. Llari

Atomic force microscopy for subcellular exploration of the mechanical properties of human aortic smooth muscle cells pp. S276-S277

C. Petit, V. Barnier and S. Avril

Review of pressure mat studies of saddle fitting to the horse’s back pp. S278-S280

J.-N. Desbrosses-Déléage, S. Duprey, A. Olivier, R. Dumas and L. Dubuis

A musculoskeletal modelling approach of the assessment of the risk of hamstring injuries in professional soccer players: a pilot study pp. S281-S282

M. Ménard, A. Sorel, R. Boumpoutou, H.a Kerhervé, R. Kulpa and B. Bideau

Energy exchange during running with an aiding and hindering force pp. S283-S285

R. M. Mesquita, A. H. Dewolf, G. Catavitello and P. A. Willems

Knee torque generation capacities modelled with physiological torque-angle-velocity relationships pp. S286-S288

Pierre Puchaud, Georges Dumont, Nicolas Bideau and Charles Pontonnier

Interest of PMMA filing to primary stabilization of the minimaly invasive osteosynthesis of schatzker type II tibial Plateau fractures pp. S289-S290

T. Vendeuvre, C. Brèque, M. Severyns, A. Ounajim, J.-P. Richer, P. Rigoard and A. Germaneau

The on-off ground asymmetry during running on sand pp. S291-S293

A. H. Dewolf, T. Lejeune and P. A. Willems

Biomechanics of the medical gesture for a peripheral venous catheter insertion pp. S294-S295

K. Torossian, M. Ottenio, A.-C. Brulez, Y. Lafon and S. Benayoun

Validation of a new technique dedicated to the mechanical characterisation of cartilage micropellets pp. S296-S298

N. Petitjean, M. Maumus, G. Dusfour, P. Cañadas, C. Jorgensen, P. Royer, D. Noël and S. Le Floc’h

Identification of the parameters of a hyperelastic fiber-reinforced model of the pig annulus fibrosus from tensile tests: on the necessity of using the transverse behavior in the cost function pp. S299-S301

G. Dusfour, S. Le Floc’h, P. Cañadas and D. Ambard

Biomechanical analysis of the lumbar-pelvic-femoral complex during the one-sided tilt test: a pilot study in triathletes pp. S302-S304

P. Chenaut, M. Ménard, P. Vaucher, L. Lancelot, B. Bideau and M. Bourgin

Bone drilling: a thermal model for bone temperature prediction pp. S305-S307

F. Amewoui, G. Le Coz, A. S. Bonnet and A. Moufki

Transversal elasticity of TIEG1 KO muscle and tendon fibers probed by atomic force microscopy pp. S308-S310

M. Kammoun, V. Dupres, J. Landoulsi, M. Subramaniam, J. Hawse and S. F. Bensamoun

Dynamic analysis of the BMX start: interactions between riders and their bike pp. S311-S313

D. Princelle, T. Monnet, E. Brunet, J. Sastre and M. Domalain

Assessment of mesenchymental stem cell micropellet as a relevant biomechanical in vitro model devoted to the study of cartilage growth pp. S314-S316

G. Dusfour, M. Maumus, P. Cañadas, D. Ambard, C. Jorgensen, D. Noël and S. Le Floc’h

Development of a new MR elastography protocol to measure the functional properties of facial muscles pp. S317-S319

R. Ternifi, P. Pouletaut, S. Dakpé, S. Testelin, B. Devauchelle, F. Charleux, J. M. Constans and S. F. Bensamoun

Influence of hysteresis on soleus Hoffmann reflex during plantar flexor muscles stretching: a pilot study pp. S320-S321

M. Datoussaid, S. Baudry and N. Guissard

Contribution of the collagen fibers to the skin mechanics pp. S322-S323

J. S. Affagard, B. Lynch, S. Bancelin, G. Ducourthial, C. Bonod-Bidaud, F. Ruggiero, M.-C. Schanne-Klein and J.-M. Allain

Effect of a specific training focusing on the trophy position to improve the tennis serve in children pp. S324-S325

F. Tubez, B. Forthomme, M. Pierard, A. Van Belle, J.-L. Croisier and C. Schwartz

The pattern of locomotor regulation during the approach run has no influence on the effectiveness of the following phases for male pole vaulters pp. S326-S328

J. Frère, A. Garnier, H. Sanchez and J. Cassirame

Highlighting the Kramer effect in swimming pp. S329-S330

M. Samson, T. Monnet and L. David

Inverse dynamics study of the parkour kong-vault during take-off pp. S331-S333

G. Maldonado, F. Bailly, P. Souères and B. Watier

On the importance of substrate deformations for cell migration pp. S334-S335

A. Gagnieu, G. Chagnon, Y. Chemisky, A. Stephanou and A. Chauvière

A joint numerical and experimental study on the self-organization of red blood cells in confined microfluidic channels pp. S336-S337

S. Mendez, C. Iss, D. Midou, A. Moreau, D. Held, A. Charrier, A. Viallat and E. Helfer

A computational framework to simulate bio-printed cells and extracellular matrix mechanobiochemical interactions pp. S338-S339

A. Douillet, C. Douillet, M. Garcia, M. Nicodem, F. Guillemot and P. Ballet

Analysis of some biomechanical variables influencing the accuracy of direct free kicks in soccer pp. S340-S342

Hai Bessenouci and A. Haceini

Harmonic decomposition and analysis of running gait pp. S343-S344

D. Benjamin, B. Abbes, S. Odof, J. B. Nolot, F. Fourchet, X. Chiementin and R. Taiar

A closed-loop multibody model to assess lower-limb kinematics in rowing pp. S345-S347

M. Retailleau, P. Fisette and F. Colloud

Remote palpation of the human brain with magnetic resonance imaging: protocol optimization for the study of glioblastoma pp. S348-S349

M. Yushchenko, M. Sarracanie, M. Amann, R. Sinkus, J. Wuerfel and N. Salameh

Effects of plantar flexors training (force vs. velocity) on plantar flexion and squat jump force-velocity relationships pp. S350-S351

C. Giroux, R. Hager, J. Feugray, G. Lauby, S. Dorel, A. Nordez and G. Guilhem

Gyro-based lower limb asymmetry during a 4-km time trial on a velodrome among high level female cyclists pp. S352-S353

S. Cordillet, N. Bideau, M. Menard and G. Nicolas

Mechanical impact of the antagonist muscles during maximal dorsiflexion is action mode dependent pp. S354-S355

M. Billot, J. Duclay, R. David and A. Martin

Shear viscoelasticity in the human brain by MR-elastography at low and high frequencies pp. S356-S358

F. Andoh, M. Tardieu, C. Pellot-Barakat and X. Maître

Repeatability and reproducibility of stance phase during running pp. S359-S361

O. Larivière, T. Provot, L. Valdes-Tamayo, M. Bourgain and D. Chadefaux

Influence of regular dance practice on the postural stability during quiet standing in healthy women pp. S362-S364

T. Marin, N. Houel, T. Begou-Mazenc, A. Brikci and Wh. Bertucci

Substrate regulation of vascular endothelial cell morphology and alignment pp. S365-S366

A. I. Barakat, C. F. Natale, C. Leclech, J. Lafaurie-Janvore and A. Babataheri

A quantitative high resolution computational cell model to unravel the mechanics in living tissues pp. S367-S369

P. Van Liedekerke, J. Neitsch, T. Johann, E. Warmt, I. Gonzalez-Valverde, S. Hoehme, S. Grosser, J. Kaes and D. Drasdo

Bioartificial liver: biomechanical considerations pp. S370-S372

L. Boulais, M. Pasqua, C. De Lartigue, R. Jellali, U. Pereira and C. Legallais

Jean Vivès award 2019 hydrodynamic of swimming: analyse the flow to understand the technique pp. S373-S375

M. Samson

Numerical study of manual wheelchair propulsion: highlight on the lever system pp. S376-S378

N. Skendraoui, F. Bogard, S. Murer, F. Beaumont, R. Taïar and G. Polidori

How do freezing to scorching environmental temperatures influence the aerodynamic performance in race cycling: a quasi-steady numerical analysis pp. S379-S381

F. Beaumont, F. Bogard, S. Murer and G. Polidori

A novel non-invasive method for estimating biomechanical properties of the internal carotid pp. S382-S383

A. Asma Ayadi, B. Wassila Sahtout and C. Olivier Balédent

Evaluation of novel implant topologies of disc in spine: custom cage implants design pp. S384-S386

Y. Benabid, N. Zeroudi, S. Abid, A. Azouz and K. Chenaifi

Does spinal fusion in the thoraco-lumbar spine modify neck, thorax, thorax-pelvis and pelvis kinematics during gait on the ground? pp. S387-S388

Y. Delpierre and P. Vernet

Lower limb prosthetics by 3D prototyping from North Africa people pp. S389-S391

Y. Benabid, Y. Kebbab and A. Djidjeli

Food puncture resistance, ingesting behavior and the curvature of upper second molars in Old World and New World monkeys pp. S392-S394

G. Thiery, F. Guy and V. Lazzari

Influence of workstation on muscular activity and perceived exertion: a preliminary study pp. S395-S397

P. Faouën, Y. Blache, I. Rogowski and L. Rubinstein

Vertical ground reactions of two types of lunges according to foot axis pp. S398-S400

M. Phomsoupha, S. Deslauriers, M. Tanneau and S. Ibrahime

Low cost and free setup for knee kinematic estimation during treadmill locomotion pp. S401-S402

Félix Marcellin, Khalil Ben Mansour and Frédéric Marin

Bone-cement interface mechanical behaviour in tibial Plateau fracture treated by tuberoplasty pp. S403-S404

A. Y. Moufid, P. Bokam, V. Valle, A. Germaneau, P. Rigoard and T. Vendeuvre

Intersession reliability of the upper quarter Y balance test score pp. S405-S407

M. Degot, Y. Blache, L. Neyton and I. Rogowski

Human gait simulation from a reduced set of low-dimensional tasks using hierarchical control pp. S408-S410

M. Boukheddimi, F. Bailly, P. Soueres and B. Watier

Manubrio-sternal joint mobility during forced ventilation using non-invasive opto-electronic plethysmography: cases studies pp. S411-S412

L. Gaillard, L. Debraux and N. Houel

Local ex-vivo evaluation of the biomechanical properties of the ascending aortic aneurysms pp. S413-S414

Siyu Lin, Marie-Catherine Morgan, Alain Lalande, Alexandre Cochet and Olivier Bouchot

Influence of the aortic morphological changes in aging on aortic flow pp. S415-S417

Mohammed Amine Bouqentar, Patrice Sudres, W. Wei, Mourad Boufi, Michel Behr and M. Evin

The interest of FE simulation for the reduction of tibial plateau fracture using balloon inflation pp. S418-S420

K. Aubert, A. Germaneau, M. Rochette, P. Rigoard and T. Vendeuvre

Shoulder muscles coordination during eccentric actions pp. S421-S423

N. A. Turpin, R. Martinez and M. Begon

Toward bio-kinematic for secure use of rehabilitation exoskeleton pp. S424-S426

J. Charafeddine, D. Pradon, S. Alfayad, S. Chevallier and M. Khalil

Robust control of the whole-body center of mass position during far reaching movements in the elderly pp. S427-S429

A. Lesport, T. Caderby, N. Peyrot and N. A Turpin

Biomechanical study between 4.5 mm and 3.5 mm distal locking screws in tibial plateau fractures pp. S430-S431

D. Belaid, R. Delmon, K. Aubert, P. Rigoard, A. Germaneau and T. Vendeuvre

Surface analysis during surgical balloon reduction of a tibial Plateau depression fracture pp. S432-S433

N. Michel, K. Aubert, A. Germaneau, L.-E Gayet, V. Valle, C. Brèque, P. Rigoard and T. Vendeuvre

Influence of implant and screw type on local bone strain field: a preliminary study pp. S434-S435

J. Greenfield, K. Bruyère-Garnier, D. Mehler, P. Appelmann, S. Kuhn, P.m Rommens and Y. Lafon

Impact of osteopathic manipulative treatment on range of motion of the pelvis during the one-sided tilt test: a pilot study pp. S436-S438

M. Ménard, M. Ferrari, A. Bouchet, P. Puchaud, P. Vaucher, F. Sutre, B. Bideau and M. Bourgin

Contribution of a new mesh concept on a compression sleeve on the intensity of vibratory constraints during exercise pp. S439-S441

J. Romain, A. Arfaoui and W. Bertucci

Identification of the reflection wave by its delay time in short artery with cepstral analysis pp. S442-S444

Wassila Sahtout, Asma Ayadi and Olivier Balédent

Improving the control of prostheses in arm amputees with approaches based on motor coordination pp. S445-S447

M. Merad, E. de Montalivet, M. Legrand, A. Touillet, N. Martinet, J. Paysant, A. Roby-Brami and N. Jarrassé

Evaluation of PAEXO, a novel passive exoskeleton for overhead work pp. S448-S450

P. Maurice, J. Čamernik, D. Gorjan, B. Schirrmeister, J. Bornmann, L. Tagliapietra, C. Latella, D. Pucci, L. Fritzsche, S. Ivaldi and J. Babič

How pole vaulters from different levels deal with speed to perform pp. S451-S453

J. Cassirame, H. Sanchez, A. Garnier and J. Frère

Influence of an adapted dynamic cycling activity on the motor function of children with cerebral palsy (CP) pp. S454-S456

V. Leblanc, F. Tubez, C. Loge, E. Abdi, I. Verstraete, D. Jacquemin, G. Dorban and R. Taiar

Comparative functional anatomy using rigid multibody simulation and anatomical transfer: Homo sapiens, Pan paniscus and Papio anubis pp. S457-S459

A. Perrier, M. Bucki, A. Supiot, N. Delcroix, F. Lamberton, F. Druelle, A. Herrel and G. Berillon

How to estimate the transparency assistance of a passive exoskeleton? a case study pp. S460-S462

N. Sghaier, S. Bellhari-Trahin, F. Marin and K. Ben Mansour

Ex vivo biomechanical study on a porcine model of three types of stabilisation in scoliosis treatment pp. S463-S464

F. Labelle, O. Auger, C. Carozzo, M. Massenzio, L. Miladi, T. Odent, E. Viguier and T. Cachon

Anisotropic bone response based on FEM simulation and real micro computed tomography of bovine bone pp. S465-S467

S. Wronski, J. Kaminski, A. Wit, J. Tarasiuk and P. Lipinski

Left ventricle hemodynamics induced by a new anatomical-shaped mitral valve pp. S468-S470

C. Papolla and R. Rieu

Overview on dynamic identification methods of floating base anthropomorphic structures pp. S471-S473

V. Bonnet, M. Gautier, R. Dumas, S. Mohammed, T. Robert, G. Venture and P. Fraisse

Effect of speed on mediolateral dynamic stability during stepping in older adults pp. S474-S475

T. Caderby, J. Begue, N. Peyrot and G. Dalleau

Fracture reduction with novel auto-adjust poly-axial pedicle screws: a cadaveric pilot study pp. S476-S477

A. A. A. Duits, T. Vendeuvre, A. Germaneau, P. Rigoard, C. Brèque, A. de Gast, F. C. Öner and S. M. van Gaalen

The use of a social assistive robot: NAO for post strokes rehabilitation therapy: a preliminary study pp. S478-S480

L. Sanchez, A. Courtine, G. Gerard-Flavian, A. Dauber-Natali, J. Signeux, M. Bourgain, T. Provot, C.a Cifuentes and M. Munera

Difference of stability between two elite boxing groups: a preliminary study pp. S481-S483

S. El-Oujaji, T. Provot, M. Bourgain and D. Dinu

Preliminary comparison between angular velocity and force measuring treadmill for running foot strike patterns classification pp. S484-S486

D. Benjamin, B. Abbes, S. Odof, J.B. Nolot, F. Fourchet, X. Chiementin and R. Taiar

Assessment of movement and pain variation before and after a MDT treatment for patient with low back pain pp. S487-S488

J.-P. Deneuville, A. Germaneau, L. Fradet, T. Monnet, K. Aubert, M. Roulaud, K. Nivole, T. Vendeuvre and P. Rigoard

Evaluation of a finite element model to predict radius bone strain in a fall configuration pp. S489-S491

M. Revel, F. Bermond, D. Mitton and H. Follet

The effect of regular walking with poles on the gait of elderly pp. S492-S493

K. Ben Mansour, P. Gorce and N. Rezzoug

Assessment of PMMA mechanical properties versus time polymerization to optimize fracture stabilizations pp. S494-S496

T. Vendeuvre, J.-C Dupré, N. Courat, A. Léglise, F. Hesser, F. Brémand, C. Brèque, A. Germaneau and P. Rigoard

Characterization of the porosity distribution and gradients in intracranial aneurysms treated with coils pp. S497-S499

J. Romero Bhathal, F. Chassagne, M. Levitt, C. Geindreau and A. Aliseda

Effect of tendon length in the estimation of musculotendon forces during an elbow flexion-extension pp. S500-S501

O. Jemaa, S. Bennour, D. Daney and L. Romdhane

ORHRO: OPEN Robotics Humanoid RObot - from a mechanical retrofit to a new real time industrial controller based walking robot pp. S502-S504

A. Eon, J. Gastebois, P. Laguillaumie, P. Vulliez, P. Seguin and J. P. Gazeau

Do smartphones allow the estimation of sport wheelchair rolling resistances? pp. S505-S506

J. Bascou, F. Brassart, C. Sauret and T. Weissland

Analysing human-exoskeleton interaction: on the human adaptation to modified gravito-inertial dynamics pp. S507-S509

S. Bastide, N. Vignais, F. Geffard and B. Berret

Humerus fractures in an infant: which causal mechanisms? pp. S510-S512

A. Delbreil, M. Bouriat, A. Pin, P. Rigoard, T. Vendeuvre and A. Germaneau

Stress distribution analysis on the femoral neck under different angle directions of loading by a finite element analysis pp. S513-S515

D. Belaid, A. Germaneau, P. Bouget, R. Delmon, A. Bouchoucha, P. Rigoard and T. Vendeuvre

External forces and impulses applied to the hind limb of 3 jumping horses at take-off-effects of the fence’s height pp. S516-S518

F. Munoz-Nates, P. Pourcelot, M. Camus, B. Ravary-Plumioen, A. Van Hamme, C. Litaise, A.-L Emond, L. Beaud, H. Chateau and N. Crevier-Denoix

Walking with hominins: from the reconstruction of a plausible anatomical model to gait energetics in Neandertals. Methodological aspects pp. S519-S520

J. Duveau, F. Multon, F. Marchal, D. Anduze and G. Berillon

Biomechanical analysis of lithic tools production: impact on the evolution of early hominin upper limb? pp. S521-S522

R. Macchi, G. Daver, M. Brenet, L. Fradet, S. Prat and M. Domalain

Ground reaction forces and moments prediction of challenging motions: fencing lunges pp. S523-S525

C. Pontonnier, C. Livet, A. Muller, A. Sorel, G. Dumont and N. Bideau

A study of the influence of arrow mass on ballistics pp. S526-S528

A. Kuch, J.-F. Debril, J.-M. Tizzoni, P. Laguillaumie and T. Monnet

The assessment of bearing and non-bearing cortical bones: tensile tests and three dimensional study of vascular architecture pp. S529-S531

X. Roothaer, R. Delille, H. Morvan, E. Markiewicz and C. Fontaine

Local measurement approach for fracture properties characterization of cancellous bone tissues using wedge splitting test (WST) pp. S532-S534

P. Bokam, A. Germaneau, P. Rigoard, T. Vendeuvre and V. Valle

Analysis of filling after internal reduction of a burst fracture of the thoracolumbar junction on a cadaveric model pp. S535-S536

C. Peltier, A. Germaneau, J.-C Dupré, F. Hesser, C. Brèque, P. Rigoard and T. Vendeuvre

Retraction: Pressure sore prevention in vet medicine: importance of the supports pp. S537-S537

The Editors

RETRACTED ARTICLE: Pressure sore prevention in vet medicine: importance of the supports pp. S538-S539

J. Caraty, L. De Vreught, T. Cachon, P. Moissonnier, A. Bongartz, E. Viguier and C. Carozzo

Retraction: The gait deviation index is differently affected in children with cerebral palsy hemiparesis and adults with post-stroke hemiparesis pp. S540-S540

The Editors

RETRACTED ARTICLE: The gait deviation index is differently affected in children with cerebral palsy hemiparesis and adults with post-stroke hemiparesis pp. S541-S543

O. Galarraga and E. Desailly

Influence of caval reconstructions on venous outflow during liver transplantation: a numerical flow simulation study on real patients and virtual cases pp. S51-SS52

F. Joly, N. Golse, N. Bousaleh, M. Lewin, E. Vibert and I. Vignon-Clementel

A numerical design of experiment approach to understand aortic dissection onset and propagation pp. S6-SS8

J. Brunet, B. Pierrat and P. Badel

Volume 22, issue 16, 2019

Influence of needling conditions on the corneal insertion force pp. 1239-1246

S. F. Han and Y. Yang

Bone remodelling around the tibia due to total ankle replacement: effects of implant material and implant–bone interfacial conditions pp. 1247-1257

Subrata Mondal and Rajesh Ghosh

Separate modeling of cortical and trabecular bone offers little improvement in FE predictions of local structural stiffness at the proximal tibia pp. 1258-1268

S. Mehrdad Hosseini Kalajahi, S. Majid Nazemi and James D. Johnston

Parallel splitting solvers for the isogeometric analysis of the Cahn-Hilliard equation pp. 1269-1281

Vladimir Puzyrev, Marcin Łoś, Grzegorz Gurgul, Victor Calo, Witold Dzwinel and Maciej Paszyński

Modeling and simulation of musculoskeletal system of human lower limb based on tensegrity structure pp. 1282-1293

Zhanxi Wang, Chaoran Yang, Kang Feng and Xiansheng Qin

Investigation of effective intrusion and extrusion force for maxillary canine using finite element analysis pp. 1294-1302

Jianlei Wu, Yunfeng Liu, Dongcai Wang, Jianxing Zhang, Xingtao Dong, Xianfeng Jiang and Xu Xu

Automated CT bone segmentation using statistical shape modelling and local template matching pp. 1303-1310

Elham Taghizadeh, Alexandre Terrier, Fabio Becce, Alain Farron and Philippe Büchler

Modeling the effects of musculoskeletal geometry on scapulohumeral muscle moment arms and lines of action pp. 1311-1322

Daanish M. Mulla, Joanne N. Hodder, Monica R. Maly, James L. Lyons and Peter J. Keir

Subject-specific geometry affects acetabular contact pressure during gait more than subject-specific loading patterns pp. 1323-1333

Mariska Wesseling, Sam Van Rossom, Ilse Jonkers and Corinne R. Henak

Comparison of computational modelling techniques for braided stent analysis pp. 1334-1344

Nicola Kelly, Donnacha J. McGrath, Caoimhe A. Sweeney, Kathrin Kurtenbach, James A. Grogan, Stefan Jockenhoevel, Barry J. O’Brien, Mark Bruzzi and Peter E. McHugh

Volume 22, issue 15, 2019

Experimental platform to facilitate novel back brace development for the improvement of spine stability pp. 1163-1173

L. Cooper, A. Gullane, J. Harvey, A. Hills, M. Zemura, J. Martindale, A. Rennie and D. Cheneler

A computational model to predict cell traction-mediated prestretch in the mitral valve pp. 1174-1185

M. A. J. van Kelle, M. K. Rausch, E. Kuhl and S. Loerakker

Numerical investigation of the role of osteopontin on the mechanical strength of biological composites pp. 1186-1196

Zheng Bo Lai

Comparative finite element modelling of aneurysm formation and physiologic inflation in the descending aorta pp. 1197-1208

Serena de Gelidi and Andrea Bucchi

Musculoskeletal modeling of user groups for virtual product and process development pp. 1209-1218

Jörg Miehling

In vivo measurement of surface skin strain during human gait to improve the design of rehabilitation devices pp. 1219-1228

Jorge Barrios-Muriel, Francisco Romero Sánchez, Francisco Javier Alonso Sánchez and David Rodríguez Salgado

Effect of turbulent models on left ventricle diastolic flow patterns simulation pp. 1229-1238

Jahanbakhsh Jahanzamin, Nasser Fatouraee and Abbas Nasiraei-Moghaddam

Volume 22, issue 14, 2019

Beyond apical ballooning: computational modelling reveals morphological features of Takotsubo cardiomyopathy pp. 1103-1106

Giulia Pontecorboli, Giovanni Biglino, Elena Giulia Milano, Froso Sophocleous, Benedetta Biffi, Amardeep Ghosh Dastidar, Silvia Schievano, Carlo Di Mario and Chiara Bucciarelli-Ducci

Secondary hip dysplasia increases risk for early coxarthritis after Legg-Calve-Perthes disease. A study of 255 hips pp. 1107-1115

Andrej Moličnik, Jošt Janša, Boštjan Kocjančič, Veronika Kralj-Iglič and Drago Dolinar

An automated magnetoencephalographic data cleaning algorithm pp. 1116-1125

Antonietta Sorriso, Pierpaolo Sorrentino, Rosaria Rucco, Laura Mandolesi, Giampaolo Ferraioli, Stefano Franceschini, Michele Ambrosanio and Fabio Baselice

An upper bound computational model for investigation of fusion effects on adjacent segment biomechanics of the lumbar spine pp. 1126-1134

Chaochao Zhou, Thomas Cha and Guoan Li

Sensitivity of muscle and intervertebral disc force computations to variations in muscle attachment sites pp. 1135-1143

Riza Bayoglu, Ogulcan Guldeniz, Nico Verdonschot, Bart Koopman and Jasper Homminga

Repeatability, reproducibility, and agreement of three computational methods to approximate the functional flexion-extension axis of the tibiofemoral joint using 3D bone models of the femur pp. 1144-1152

Rocio Lozano, Stephen M. Howell and Maury L. Hull

Tibiotalar cartilage stress corresponds to T2 mapping: application to barefoot running in novice and marathon-experienced runners pp. 1153-1161

Hyun Kyung Kim, Ali Mirjalili, Anthony Doyle and Justin Fernandez

Volume 22, issue 13, 2019

In memoriam Ivars Knets pp. 1033-1033

The Editors

Structure and properties of a personalized bio-fixed implant prepared with selective laser melting pp. 1034-1042

Guoqing Zhang, Junxin Li, Jin Li, Xiaoyu Zhou and Anmin Wang

Kinetic-based indexes for the functional evaluation of gait in diplegic children: a preliminary report pp. 1043-1046

Matteo Zago, Carolina Corsi, Claudia Condoluci and Manuela Galli

The influence of impact force redistribution and redirection on maximum principal strain for helmeted head impacts pp. 1047-1060

Karen Taylor, T. Blaine Hoshizaki and Michael Gilchrist

The effects of manufacturing tolerances and assembly force on the volumetric wear at the taper junction in modular total hip arthroplasty pp. 1061-1072

Thom Bitter, Imran Khan, Tim Marriott, Elaine Lovelady, Nico Verdonschot and Dennis Janssen

The consequence of substrates of large-scale rigidity on actin network tension in adherent cells pp. 1073-1082

Ian Manifacier, Kevin M. Beussman, Sangyoon J. Han, Nathan J. Sniadecki, Imad About and Jean-Louis Milan

Biomechanical effects of posterior pedicle fixation techniques on the adjacent segment for the treatment of thoracolumbar burst fractures: a biomechanical analysis pp. 1083-1092

Wei Wang, Baoqing Pei, Yuyang Pei, Zhenpeng Shi, Chao Kong, Xueqing Wu, Nan Wu, Yubo Fan and Shibao Lu

Study of age-related changes in Middle ear transfer function pp. 1093-1102

Lei Zhou, Na Shen, Miaolin Feng, Houguang Liu, Maoli Duan and Xinsheng Huang

Volume 22, issue 12, 2019

The influence of model parameters on model validation pp. 997-1008

Benjamin W. Infantolino, Steph E. Forrester, Matthew T.G. Pain and John H. Challis

Real-time technique for conversion of skin temperature into skin blood flow: human skin as a low-pass filter for thermal waves pp. 1009-1019

Andrey Sagaidachnyi, Andrey Fomin, Dmitry Usanov and Anatoly Skripal

A round-robin finite element analysis of human femur mechanics between seven participating laboratories with experimental validation pp. 1020-1031

Daniel Kluess, Ehsan Soodmand, Andrea Lorenz, Dieter Pahr, Michael Schwarze, Robert Cichon, Patrick A. Varady, Sven Herrmann, Bernhard Buchmeier, Christian Schröder, Stefan Lehner and Maeruan Kebbach

Volume 22, issue 11, 2019

Numerical study of hemodynamics in brain aneurysms treated with flow diverter stents using porous medium theory pp. 961-971

Hooman Yadollahi-Farsani, Erik Scougal, Marcus Herrmann, Wei Wei, David Frakes and Brian Chong

Modeling the effect of blood vessel bifurcation ratio on occlusive thrombus formation pp. 972-980

Hari Hara Sudhan Lakshmanan, Joseph J. Shatzel, Sven R. Olson, Owen J.T. McCarty and Jeevan Maddala

A minimum area discrepancy method (MADM) for force displacement response correlation pp. 981-996

Jeremie Peres, Christophe Bastien, Jesper Christensen and Zahra Asgharpour

Volume 22, issue 10, 2019

A screening method to analyse the sensitivity of a lower limb multibody kinematic model pp. 925-935

Eric Jacquelin, Denis Brizard and Raphael Dumas

Three-dimensional finite element analysis of the composite and compomer onlays in primary molars pp. 936-941

Zuhal Kirzioglu, Derya Ceyhan, Fatih Sengul and Ayse Ceren Altun

An image-based method to measure joint deformity in inflammatory arthritis: development and pilot study pp. 942-952

Travis F. Henchie, Ellen M. Gravallese, Todd L. Bredbenner and Karen L. Troy

Influence of resin cement rigidity on the stress distribution of resin-bonded fixed partial dentures pp. 953-960

Marcela M. Penteado, João P. M. Tribst, Ana L. B. Jurema, Guilherme S. F. A. Saavedra and Alexandre L. S. Borges

Volume 22, issue 9, 2019

The effect of ventricular volume increase in the amplitude of intracranial pressure pp. 889-900

João Apura, Jorge Tiago, Alexandra Bugalho de Moura, José Artur Lourenço and Adélia Sequeira

A fully coupled porous media and channels flow approach for simulation of blood and bile flow through the liver lobules pp. 901-915

Mehdi Mosharaf-Dehkordi

Computational modal analysis of a composite pelvic bone: convergence and validation studies pp. 916-924

Petr Henyš and Lukáš Čapek

Volume 22, issue 8, 2019

Modelling of intracranial behaviour on occiput impact in judo pp. 797-805

Ryutaro Suzuki, Masaki Omiya, Hiroaki Hoshino, Takeshi Kamitani and Yusuke Miyazaki

A multi-body model for comparative study of cervical traction simulation – development, improvement and validation pp. 806-814

Lawrence K. F. Wong, Zhiwei Luo, Nobuyuki Kurusu and Keiji Fujino

Bicuspid aortic valve aortopathies: An hemodynamics characterization in dilated aortas pp. 815-826

Diana Oliveira, Sílvia Aguiar Rosa, Jorge Tiago, Rui Cruz Ferreira, Ana Figueiredo Agapito and Adélia Sequeira

An interactive surgical simulation tool to assess the consequences of a partial glossectomy on a biomechanical model of the tongue pp. 827-839

K.D.R. Kappert, M.J.A. van Alphen, S. van Dijk, L.E. Smeele, A.J.M. Balm and F. van der Heijden

A procedure to estimate normal and friction contact parameters in the stance phase of the human gait pp. 840-852

Joaquín Ojeda and Juana Mayo

Simulation and evaluation of 3D traction force microscopy pp. 853-860

C.N. Holenstein, C.R. Lendi, Nino Wili and J.G. Snedeker

A multi-body model for comparative study of cervical traction simulation – comparison between inclined and sitting traction pp. 861-868

Lawrence K. F. Wong, Zhiwei Luo, Nobuyuki Kurusu and Keiji Fujino

Optimal control simulation predicts effects of midsole materials on energy cost of running pp. 869-879

Eva Dorschky, Daniel Krüger, Nicolai Kurfess, Heiko Schlarb, Sandro Wartzack, Bjoern M. Eskofier and Antonie J. van den Bogert

A validated computational framework to evaluate the stiffness of 3D printed ankle foot orthoses pp. 880-887

Alessio Ielapi, Nicolas Lammens, Wim Van Paepegem, Malcolm Forward, Jan Patrick Deckers, Miguel Vermandel and Matthieu De Beule

Volume 22, issue 7, 2019

Mathematical modelling of ciliary propulsion of an electrically-conducting Johnson-Segalman physiological fluid in a channel with slip pp. 685-695

N. Manzoor, O. Anwar Bég, K. Maqbool and S. Shaheen

Customized k-nearest neighbourhood analysis in the management of adolescent idiopathic scoliosis using 3D markerless asymmetry analysis pp. 696-705

Maliheh Ghaneei, Ronald Ekyalimpa, Lindsey Westover, Eric C. Parent and Samer Adeeb

Stress distribution of three-unit fixed partial prostheses (conventional and pontic) supported by three or two implants: 3D finite element analysis of ductile materials pp. 706-712

Marcelo Bighetti Toniollo, Ligia Jaqueline Pereira Vieira, Mikaelly dos Santos Sá, Ana Paula Macedo, Jair Pereira de Melo and Andrea Sayuri Silveira Dias Terada

The influence of impact source on variables associated with strain for impacts in ice hockey pp. 713-726

Andrew Post, Lauren Dawson, T. Blaine Hoshizaki, Michael D. Gilchrist and Michael D. Cusimano

A validated combined musculotendon path and muscle-joint kinematics model for the human hand pp. 727-739

Jumana Ma’touq, Tingli Hu and Sami Haddadin

A comprehensive and volumetric musculoskeletal model for the dynamic simulation of the shoulder function pp. 740-751

Fabien Péan, Christine Tanner, Christian Gerber, Philipp Fürnstahl and Orcun Goksel

Relationship between myocardial bridge compression severity and haemodynamic perturbations pp. 752-763

Ashkan Javadzadegan, Abouzar Moshfegh and Hamid Hassanzadeh Afrouzi

Effects of gleno-humeral joint centre mislocation on gleno-humeral kinematics and kinetics pp. 764-771

Mathieu Lempereur, Sylvain Brochard, Julien Leboucher, Fabien Leboeuf, Olivier Rémy-Néris and Bhushan Borotikar

Pair-wise vs group-wise registration in statistical shape model construction: representation of physiological and pathological variability of bony surface morphology pp. 772-787

Pietro Cerveri, Antonella Belfatto and Alfonso Manzotti

A study on relationship between pulsatile tinnitus and temporal bone pneumatization grade pp. 788-796

Shan Tian, Xingyu Fan, Yawei Wang, Zhaohui Liu and Lizhen Wang

Volume 22, issue 6, 2019

Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering pp. 567-573

A. P. G. Castro, R. B. Ruben, S. B. Gonçalves, J. Pinheiro, J. M. Guedes and P. R. Fernandes

Rigid-body modeling of knee cartilage and meniscus using experimental pressure-strain curves pp. 574-584

S. Wilson, J. Hausselle, T.M. Guess and R.V. Gonzalez

Biomechanical comparison of implant inclinations and load times with the all-on-4 treatment concept: a three-dimensional finite element analysis pp. 585-594

Ting Liu, Zhixiang Mu, Ti Yu, Chao Wang and Yuanding Huang

A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair pp. 595-604

Tim Leschinger, Stefan Birgel, Michael Hackl, Manfred Staat, Lars Peter Müller and Kilian Wegmann

Construction of a risk model through the fusion of experimental data and finite element modeling: Application to car crash-induced TBI pp. 605-619

Seyed Saeed Ahmadisoleymani and Samy Missoum

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection pp. 620-630

Yonghui Qiao, Yujie Zeng, Ying Ding, Jianren Fan, Kun Luo and Ting Zhu

The biomechanics of concussion for ice hockey head impact events pp. 631-643

Andrew Post, T. Blaine Hoshizaki, Clara Karton, J. Michio Clark, Lauren Dawson, Janie Cournoyer, Karen Taylor, R. Anna Oeur, Michael D. Gilchrist and Michael D. Cusimano

Cascaded statistical shape model based segmentation of the full lower limb in CT pp. 644-657

Emmanuel A. Audenaert, Jan Van Houcke, Diogo F. Almeida, Lena Paelinck, M. Peiffer, Gunther Steenackers and Dirk Vandermeulen

Physiological complexity of gait is decreased in individuals with chronic stroke pp. 658-663

Eric L. Dugan and Stephanie A. Combs-Miller

Sensitivity of stress and strain calculations to passive material parameters in cardiac mechanical models using unloaded geometries pp. 664-675

S. Kallhovd, J. Sundnes and S. T. Wall

Biomechanical and functional effects of shoulder kinesio taping® on cerebral palsy children interacting with virtual objects pp. 676-684

N. García-Hernández, J. Corona-Cortés, L. García-Fuentes, R. Díaz González-Santibañez and V. Parra-Vega

Volume 22, issue 5, 2019

Validation of an OpenSim full-body model with detailed lumbar spine for estimating lower lumbar spine loads during symmetric and asymmetric lifting tasks pp. 451-464

Erica Beaucage-Gauvreau, William S. P. Robertson, Scott C. E. Brandon, Robert Fraser, Brian J. C. Freeman, Ryan B. Graham, Dominic Thewlis and Claire F. Jones

Effects of membrane reference state on shape memory of a red blood cell pp. 465-474

Zhe Gou, Xiaodong Ruan, Feng Huang and Xin Fu

The effect of including increased arterial stiffness in the upper body when modelling Coarctation of the Aorta pp. 475-489

Dilan Pathirana, Barbara Johnston and Peter Johnston

Biomechanical comparison of the effects of anterior, posterior and transforaminal lumbar interbody fusion on vibration characteristics of the human lumbar spine pp. 490-498

Wei Fan and Li-Xin Guo

An integrated haptic-enabled virtual reality system for orthognathic surgery planning pp. 499-517

Jorge Zaragoza-Siqueiros, Hugo I. Medellin-Castillo, Héctor de la Garza-Camargo, Theodore Lim and James M. Ritchie

A methodology for numerically analysing the hepatic artery haemodynamics during B-TACE: a proof of concept pp. 518-532

Jorge Aramburu, Raúl Antón, Alejandro Rivas, Juan Carlos Ramos, Gorka S. Larraona, Bruno Sangro and José Ignacio Bilbao

Design and evaluation of the crimping of a hooked self-expandable caval valve stent for the treatment of tricuspid regurgitation pp. 533-546

Gideon Praveen Kumar, Hwa Liang Leo and Fangsen Cui

Analysis of the volume of fluid (VOF) method for the simulation of the mucus clearance process with CFD pp. 547-566

Concepción Paz, Eduardo Suárez, Jesús Vence and Adrián Cabarcos

Volume 22, issue 4, 2019

Assessment of scapular morphology and bone quality with statistical models pp. 341-351

William S. Burton, Irene Sintini, Jason M. Chavarria, James R. Brownhill and Peter J. Laz

Predictions of Birmingham hip resurfacing implant offset - In vitro and numerical models pp. 352-363

A. Ramos, Marco P. Soares dos Santos and M. Mesnard

Computational investigations on the hemodynamic performance of a new swirl generator in bifurcated arteries pp. 364-375

B. Prashantha and S. Anish

Non-rigid deformation to include subject-specific detail in musculoskeletal models of CP children with proximal femoral deformity and its effect on muscle and contact forces during gait pp. 376-385

Mariska Wesseling, Lode Bosmans, Christophe Van Dijck, Jos Vander Sloten, Roel Wirix-Speetjens and Ilse Jonkers

The impact of arm-crank position on the drag of a paralympic hand-cyclist pp. 386-395

Paul Mannion, Yasin Toparlar, Eoghan Clifford, Magdalena Hajdukiewicz, Thomas Andrianne and Bert Blocken

A pragmatic approach to understand peripheral artery lumen surface stiffness due to plaque heterogeneity pp. 396-408

Erica E. Neumann, Melissa Young and Ahmet Erdemir

Influence of resin cement thickness and temperature variation on mechanical behavior of dental ceramic fragment restoration pp. 409-417

Ana Paula Martini, Fernando Isquierdo de Souza, Rodolfo Bruniera Anchieta, Erika Oliveira de Almeida, Amilcar Chagas Freitas Junior and Eduardo Passos Rocha

Assessment of haemophilic arthropathy through balance analysis: a promising tool pp. 418-425

Xavier García-Massó, Yiyao Ye-Lin, Javier Garcia-Casado, Felipe Querol and Luis-Millan Gonzalez

An in vivo parameter identification method for arteries: numerical validation for the human abdominal aorta pp. 426-441

Jan-Lucas Gade, Jonas Stålhand and Carl-Johan Thore

Development and validation of a finite element model to simulate the opening of a medial opening wedge high tibial osteotomy pp. 442-449

Victor A. Carranza, Jacob Reeves, Alan Getgood and Timothy A. Burkhart

Volume 22, issue 3, 2019

Evaluation of helmet and goggle designs by modeling non-penetrating projectile impacts pp. 229-242

Rinat Friedman, Ayelet Haimy, Yoram Epstein and Amit Gefen

Effects of medial collateral ligament release, limb correction, and soft tissue laxity on knee joint contact force distribution after medial opening wedge high tibial osteotomy: a computational study pp. 243-250

Tserenchimed Purevsuren, Batbayar Khuyagbaatar, Kyungsoo Kim and Yoon Hyuk Kim

Comparison of stress distribution in dental crown with different cusp angles: 3D finite element analysis pp. 251-258

Han-Wool Kim, Byung-Ho Choi, Eun-Jeong Bae and Joong-Yeon Lim

Musculoskeletal models with generic and subject-specific geometry estimate different joint biomechanics in dysplastic hips pp. 259-270

Ke Song, Andrew E. Anderson, Jeffrey A. Weiss and Michael D. Harris

Polyethylene glenoid component fixation geometry influences stability in total shoulder arthroplasty pp. 271-279

Nikolas K. Knowles, G. Daniel G. Langohr, George S. Athwal and Louis M. Ferreira

Evaluation of postoperative dental implant primary stability using 3D finite element analysis pp. 280-287

Dávid Pammer

Fluid-structure interaction assessment of blood flow hemodynamics and leaflet stress during mitral regurgitation pp. 288-303

Saeed Adham Esfahani, Kamran Hassani and Daniel M. Espino

A voxel-based method for designing a numerical biomechanical model patient-specific with an anatomical functional approach adapted to additive manufacturing pp. 304-312

Augustin Lerebours, Frederic Marin, Salima Bouvier, Christophe Egles, Alain-Charles Masquelet and Alain Rassineux

Influence of energy absorbers on Malgaigne fracture mechanism in lumbar-pelvic system under vertical impact load pp. 313-323

K. Arkusz, T. Klekiel, G. Sławiński and R. Będziński

Finite element analysis of titanium alloy-graphene based mandible plate pp. 324-330

Prashant Jindal, Frank Worcester, Kartikeya Walia, Anand Gupta and Philip Breedon

Voxel-based modeling of airflow in the human nasal cavity pp. 331-339

Shinya Kimura, Takashi Sakamoto, Toshihiro Sera, Hideo Yokota, Kenji Ono, Denis J. Doorly, Robert C. Schroter and Gaku Tanaka

Volume 22, issue 2, 2019

Image-based multi-scale mechanical analysis of strain amplification in neurons embedded in collagen gel pp. 113-129

Victor W. L. Chan, William R. Tobin, Sijia Zhang, Beth A. Winkelstein, Victor H. Barocas, Mark S. Shephard and Catalin R. Picu

Smart platform for the analysis of cupula deformation caused by otoconia presence within SCCs pp. 130-138

Radun Vulović, Milica Nikolić and Nenad Filipović

The effects of the muscular contraction on the abdominal biomechanics: a numerical investigation pp. 139-148

Piero G. Pavan, Silvia Todros, Paola Pachera, Silvia Pianigiani and Arturo N. Natali

Routine clinical motion analysis: comparison of a bespoke real-time protocol to current clinical methods pp. 149-158

Lindsay Jane Millar, Lin Meng and Philip John Rowe

MusIC method enhancement by a sensitivity study of its performance: Application to a lower limbs musculoskeletal model pp. 159-168

A. Muller, C. Pontonnier and G. Dumont

Creating a human head finite element model using a multi-block approach for predicting skull response and brain pressure pp. 169-179

Zhihua Cai, Yun Xia, Zheng Bao and Haojie Mao

Numerical assessment of the human body response to a ground-level explosion pp. 180-205

Piotr W. Sielicki and Tomasz Gajewski

Patellofemoral cartilage stresses are most sensitive to variations in vastus medialis muscle forces pp. 206-216

Saikat Pal, Thor F. Besier, Garry E. Gold, Michael Fredericson, Scott L. Delp and Gary S. Beaupre

A fully coupled framework for in silico investigation of in-stent restenosis pp. 217-228

Shibo Li, Long Lei, Ying Hu, Yanfang Zhang, Shijia Zhao and Jianwei Zhang

Volume 22, issue 1, 2019

In memorium Christopher Rae Jacobs pp. 1-2

John Middleton

An approach to generate noncontact ACL-injury prone situations on a computer using kinematic data of non-injury situations and Monte Carlo simulation pp. 3-10

R. Eberle, D. Heinrich, A. J. van den Bogert, M. Oberguggenberger and W. Nachbauer

Performance criteria for generating predictive optimal control simulations of bicycle pedaling pp. 11-20

Alexis D. Gidley, Anthony P. Marsh and Brian R. Umberger

A musculoskeletal model customized for squatting task pp. 21-24

Danilo S. Catelli, Mariska Wesseling, Ilse Jonkers and Mario Lamontagne

Calibration of crushable foam plasticity models for synthetic bone material for use in finite element analysis of acetabular cup deformation and primary stability pp. 25-37

Christian Schulze, Danny Vogel, Manuela Sander and Rainer Bader

Numerical evaluation of the efficacy of small-caliber colonoscopes in reducing patient pain during a colonoscopy pp. 38-46

Debao Zhou and Xuehuan He

Implication of obesity on motion, posture and internal stress of the foot: an experimental and finite element analysis pp. 47-54

B. Kathirgamanathan, P. Silva and J. Fernandez

Forward dynamic optimization of handle path and muscle activity for handle based isokinetic wheelchair propulsion: A simulation study pp. 55-63

Nithin Babu Rajendra Kurup, Markus Puchinger and Margit Gföhler

Assessing the potential of the qualitative trajectory calculus to detect gait pathologies: a case study of children with developmental coordination disorder pp. 64-70

J. Beernaerts, R. Derie, B. Nguyen, P. Vansteenkiste, B. De Baets, F.J.A. Deconinck, M. Lenoir, D. De Clercq and N. Van de Weghe

Investigating sensitivity coefficients characterizing the response of a model of tau protein transport in an axon to model parameters pp. 71-83

Ivan A. Kuznetsov and Andrey V. Kuznetsov

A computational approach to investigate optimal cutting speed configurations in rotational needle biopsy cutting soft tissue pp. 84-93

Chi-Lun Lin and Guan-Jhong Lan

A proposal for a kinetic summary measure: the Gait Kinetic Index pp. 94-99

Veronica Cimolin, Claudia Condoluci, Pier Francesco Costici and Manuela Galli

A new numerical approach to mechanically analyse biological structures pp. 100-111

M. Marques, J. Belinha, L. M. J. S. Dinis and R. M. Natal Jorge