Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 18, issue S1, 2015

Editorial pp. 1863-1863

Philippe Rouch

A probabilistic study of the ultrasonic reflection coefficient from cortical bones pp. 1864-1865

A. Abdoulatuf, V.-H. Nguyen, C. Desceliers and S. Naili

Computation of spine intervertebral motions in scoliotic patients: a multibody approach pp. 1866-1867

G. Abedrabbo, O. Cartiaux, P. Mahaudens, C. Detrembleur, M. Mousny and P. Fisette

A mechanical model to investigate the role of the nucleus during confined cell migration pp. 1868-1869

R. Allena, H. Thiam, M. Piel and D. Aubry

Alignment of centers of mass of body segments with the gravity line pp. 1870-1871

C. Amabile, A. Nérot, J. Choisne, H. Pillet, V. Lafage and W. Skalli

Isometric point of lateral femoral condyle analysis with in vitro kinematic study in order to position the extra-articular part of an ACL reconstruction pp. 1872-1873

M. Ankri, F. Khiami, G. Rochcongar, T. Joubert, H. Pillet, P. Thoreux and P. Rouch

Regional identification of mechanical properties in arteries pp. 1874-1875

S. Avril, M. R. Bersi, C. Bellini, K. Genovese and J. D. Humphrey

Comparison of mechanical parameters between tissue-engineered and native cartilage: a numerical study pp. 1876-1877

C. Bandeiras and A. Completo

Analysis of bone conducted sound over the cranial vault pp. 1878-1879

J. Barbut, A. Deveze, C. Masson and E. Ogam

Quantify osteoarthritis gait at the doctor’s office: a simple pelvis accelerometer based method independent from footwear and aging pp. 1880-1881

R. Barrois, L. Oudre, Th. Moreau, Ch. Truong, N. Vayatis, S. Buffat, A. Yelnik, C. de Waele, Th. Gregory, S. Laporte, P. P. Vidal and D. Ricard

Measurement of wheelchair adjustment effects on turning deceleration pp. 1882-1883

J. Bascou, C. Sauret, C. Villa, F. Lavaste and H. Pillet

Histomorphometry of the newly formed bone after its growth modulation by static and dynamic compression using a rat tail model pp. 1884-1885

A. Benoit, T. Mustafy, I. Londono, F. Beaudry, P. Vachon, G. Grimard, C.-E. Aubin and I. Villemure

Spring jumpers vs power jumpers: ankle joint behavior in elite wushu athletes and implications for performance and injury risk pp. 1886-1887

L. Benouaich, P. Rouch, F. Natta and P. Thoreux

Estimation of subject-specific ligament length variation during knee flexion pp. 1888-1889

E. Bergamini, H. Pillet, G. Rochcongar, P. Thoreux, W. Skalli, A. Cappozzo and P. Rouch

On the benefits of using HD-sEMG technique for estimating muscle force pp. 1890-1891

S. Boudaoud, S. Allouch, M. Al Harrach and F. Marin

Preliminary comparative study of two accelerometers performances for evaluation of dorsoventral movement in trotting horse pp. 1892-1893

N. Brouillet, B. Jarlot, P. Pillard, W. Bertucci and E. Viguier

Thoracic aortic aneurysm: 4D flow MRI and computational fluid dynamics model pp. 1894-1895

F. M. Callaghan, J. Karkouri, K. Broadhouse, M. Evin, D. F. Fletcher and S. M. Grieve

Distribution of gap and micromotion during compressive loading around a cementless femoral stem pp. 1896-1897

V. M. Camine, H. Rüdiger, D. P. Pioletti and A. Terrier

IVD nutrition processes under compressive load: a finite deformation model pp. 1898-1899

M. A. Chetoui, O. Boiron, A. Dogui and V. Deplano

Vertebral strength prediction under anterior compressive force using a finite element model for osteoporosis assessment pp. 1900-1901

J. Choisne, J. M. Valiadis, C. Travert, S. Kolta, C. Roux and W. Skalli

Pedobarometric evaluation of specific shoe wearing in patients with diabetic peripheral neuropathy pp. 1902-1903

K. Choplin, J.-M. Audebrand and B. Beaune

Mechanical properties of porcine spinal segments after intervertebral disc fenestration: an in vitro preliminary study pp. 1904-1905

Y. Chotar-Vasseur, C. Halimi, T. Cachon, C. Carozzo, G. Sudre, L. David and E. Viguier

In vitro comparison between mechanical properties and elastographic characterization of porcine intervertebral disc pp. 1906-1907

Y. Chotar-Vasseur, T. Cachon, B. Ponsard, C. Carozzo and E. Viguier

Validation of a method for dispatching discrete sensors on an insole for plantar pressure analysis pp. 1908-1909

L. Claverie, A. Ille and P. Moretto

Estimating joint space of the knee during weight-bearing squatting activity using motion capture – preliminary results of a new method pp. 1910-1911

J. Clément, T. Cresson, N. Hagemeister, R. Dumas and J. A. de Guise

Influence of the menstrual cycle on breast skin elasticity pp. 1912-1913

R. Coumaré, L. Bouten and F. Barbier

Modelling of anisotropic cortical bone based on degradation mechanism pp. 1914-1915

C. Cluzel and R. Allena

Biomechanical comparison between hybrid turf (‘AirFibr’ technology) and natural turf at landing after hurdle jumping in one horse pp. 1916-1917

N. Crevier-Denoix, F. Munoz-Nates, A. Van Hamme, M. Camus, A.-L. Emond, H. Jerbi, B. Ravary-Plumioen, H. Chateau and P. Pourcelot

Identifying representative muscle synergies in overhead football throws pp. 1918-1919

A. L. Cruz Ruiz, C. Pontonnier, A. Sorel and G. Dumont

Foot-flat period estimation during daily living situations of asymptomatic and lower limb amputee subjects pp. 1920-1921

B. Dauriac, X. Bonnet, C. Villa, H. Pillet and F. Lavaste

Mechanical characterization of porcine ascending aorta pp. 1922-1923

V. Deplano, M. Boufi, O. Boiron, Y. Alimi and E. Bertrand

Viscoelastoplastic model of cell nucleus under compression pp. 1924-1925

S. Deveraux, R. Allena and D. Aubry

Effect of stride length on maximal pelvic tilt and hip extension during running pp. 1926-1927

A. Dewolf and D. De Jaeger

Body stance influences the visual vertical perception in patients with vestibular disorders pp. 1928-1929

M. Donnard, P. Lorin, A. Rahmani, S. Boyas and B. Beaune

Characterization of morphological trunk changes in camptocormia patients pp. 1930-1931

Ricardo Duarte, Michel Mesnard, Mathieu de Sèze, Coralie Vignolles and Philippe Wentzy

What is the recommended size of a Volume of Interest for cancellous bone? A skeleton-based study pp. 1932-1933

G. Dubois, M. Prot, S. Laporte and T.J. Cloete

Muscle force prediction: can we rely on musculoskeletal model estimations? A case study on push force exertions with the upper limb pp. 1934-1935

S. Duprey, L. Savonnet, N. Black and X. Wang

Comparison of muscle activation pattern between alpine skiing and snowboarding pp. 1936-1937

T. Falda-Buscaiot and F. Hintzy

Simultaneous postural adjustments (SPA) in single step, analysed using the “Lissajous method” pp. 1938-1939

P. Fourcade and S. Memari

Predicting postoperative knee flexion during gait of cerebral palsy children pp. 1940-1941

O. A. Galarraga C., V. Vigneron, B. Dorizzi, N. Khouri and E. Desailly

Effect of strain rate on the toughness of human tibial cortical bone pp. 1942-1943

R. Gauthier, H. Follet and D. Mitton

Numerical simulations of a bypass repair of an iliac artery obliteration pp. 1944-1945

A. R. Ghigo, S. AbouTaam, X. Wang, P.-Y. Lagrée and J.-M. Fullana

Scapulothoracic kinematics during scaption after one year of tennis practice in elite girl players pp. 1946-1947

B. Gillet, C. Berger-Vachon and I. Rogowski

Isokinetic profile in female athletes with and without patellofemoral pain syndrome after anterior cruciate ligament reconstruction pp. 1948-1949

M. Le Guen, D. Monnot, I. Rogowski, G. Vigne and V. Sevrez

Estimation of clinically relevant indicators for EVAR using patient-specific finite element simulation pp. 1950-1951

J. Gindre, A. Bel-Brunon, A. Combescure, P. Haigron, M. Rochette and A. Lucas

Biomechanical evaluation of a new treatment method for distal tibia fractures pp. 1952-1953

J. R. F. Greenfield, S. Kuhn, D. Mehler, F. Puel and P. M. Rommens

Shear wear elastography of the human Achilles tendon: a cadaveric study of factors influencing the repeatability pp. 1954-1955

T.X. Haen, A. Roux, C. Labruyere, C. Vergari, P. Rouch, O. Gagey, M. Soubeyrand and S. Laporte

Motion capture for functional analysis of new biomaterials in a small animal model pp. 1956-1957

C. Hansen, T. M. Dinis, G. Vidal, K. Ben-Mansour, D. Bresson, C. Egles and F. Marin

Do mechanical properties of Achilles tendon influence torque steadiness? pp. 1958-1959

J. Johannsson, J. Jakobi, J. Duchateau and S. Baudry

Engineering human 3D micromuscles with co-culture of fibroblasts and myoblasts pp. 1960-1961

B. Kalman, C. Monge, A. Bigot, V. Mouly, C. Picart and T. Boudou

Development of a mechanical model of the human skull bone by morphological study pp. 1962-1963

M. Karkar, C. Marechal, R. Delille, P. Drazetic and T. Colard

Three dimensional functional analysis of the human mandibular movements pp. 1964-1965

T. Koeppel, E. Sapin-De Brosses and A-S. Bonnet

The concept of frozen elastic energy as a consequence of changes in microstructure morphology pp. 1966-1967

W. Krasny, C. Morin, S. Avril, H. Magoariec and C. Hellmich

3D cancer cell migration in collagen matrices pp. 1968-1969

L. Laforgue, V. M. Laurent, A. Duperray and C. Verdier

Study of less lethal projectiles blunt impacts on the thorax by experiments on pig thoracic cages and numerical simulations pp. 1970-1971

A. Langlet, J. Pavier, N. Eches and P. Bailly

Assessing the accuracy and precision of manual registration of both femur and tibia using EOS imaging system with multiple views pp. 1972-1973

K. Langlois, H. Pillet, F. Lavaste, G. Rochcongar, P. Rouch, P. Thoreux and W. Skalli

On the influence of marrow on the mechanical behavior of porcine trabecular bone under dynamic loading: a numerical investigation pp. 1974-1975

A. Laouira, J. Rahmoun, H. Naceur, P. Drazetic, C. Fontaine and G. L. Niebur

Mechanical characterization of aortic valve tissues using an inverse analysis approach pp. 1976-1977

C. Laville, V. Acosta-Santamaria, O. Trabelsi, S. Avril and Y. Tillier

Ultrasonic assessment of diagonal stiffness coefficients in children cortical bone pp. 1978-1979

E. Lefèvre, P. Lasaygues, C. Baron, C. Payan, H. Follet and M. Pithioux

Perceived grip, balance and comfort of yoga and gym mats correlate with biomechanical and mechanical assessment pp. 1980-1981

E. Le Flao, C. Imbert, H. Wloch and N. Gueguen

Bone water at the nanoscale: a molecular dynamics study pp. 1982-1983

T. Lemaire, T.-T. Pham, N. H. de Leeuw and S. Naili

3D location deduced by inertial measurement units: a challenging problem pp. 1984-1985

K. Lepetit, C. Hansen, K. Ben Mansour and F. Marin

Assessment of the rocker sole shoes on postural stability in diabetic patients with distal sensory neuropathy pp. 1986-1987

M. Lumeau, M. Lempereur and O. Rémy-Néris

Displacement of facial soft tissues in upright versus supine positions pp. 1988-1989

F. Marin, K. Ben Mansour, F. Demeter and P. Frey

Effects of a prototype saddle (short panels) on the biomechanics of the equine back: preliminary results pp. 1990-1991

P. Martin, H. Chateau, P. Pourcelot, L. Duray and L. Chèze

Increase of passive stiffness in adolescent idiopathic scoliosis pp. 1992-1993

Ph. Mahaudens and Ch. Detrembleur

Evidence of dynamic postural control performance in parkour landing pp. 1994-1995

G. Maldonado, H. Bitard, B. Watier and P. Soueres

Comparison between several locations of gyroscope for gait events detection pp. 1996-1997

K. Ben Mansour, N. Rezzoug and P. Gorce

Biomechanical response of colonic tissue under high-speed traction pp. 1998-1999

D. Massalou, T. Bège, C. Masson, P. Foti, P.-J. Arnoux, P. Baqué, C. Brunet and S.-V. Berdah

Validity of a musculoskeletal model using two different geometries for estimating hip contact forces during normal walking pp. 2000-2001

F. Moissenet, M. Giroux, L. Chèze and R. Dumas

The influence of spatial barriers on the ingress/egress movement toward an aircraft seat for persons with reduced mobility: a preliminary study pp. 2002-2003

C. Molenaar, F. Gabrielli and P. Pudlo

Influence of healing time on the mechanical properties of an implanted mesh pp. 2004-2005

A. Morch, B. Pouseele, G. Doucède, J.-F. Witz, F. Lesaffre, M. Brieu, M. Cosson and C. Rubod

Rest shape computation for highly deformable model of brain pp. 2006-2007

F. Morin, H. Courtecuisse, M. Chabanas and Y. Payan

Dealing with modularity of multibody models pp. 2008-2009

A. Muller, C. Pontonnier, C. Germain and G. Dumont

A comparative study of 3 body segment inertial parameters scaling rules pp. 2010-2011

A. Muller, C. Germain, C. Pontonnier and G. Dumont

Accelerometric and dynamometric measurements of the impact shock of the equine forelimb and hindlimb at high speed trot on six different tracks – preliminary study in one horse pp. 2012-2013

F. Munoz-Nates, H. Chateau, A. Van Hamme, M. Camus, M. Pauchard, B. Ravary-Plumioen, J.-M. Denoix, P. Pourcelot and N. Crevier-Denoix

Comparison and validation of five scapulothoracic models for correcting soft tissue artefact through multibody optimisation pp. 2014-2015

A. Naaim, F. Moissenet, R. Dumas, M. Begon and L. Chèze

Infant eye finite element model to investigate retinal hemorrhages after fall and shaking events pp. 2016-2017

J. Nadarasa, C. Deck, F. Meyer, J. S. Raul and R. Willinger

Estimation of hip joint center from the external body shape: a preliminary study pp. 2018-2019

A. Nérot, X. Wang, H. Pillet and W. Skalli

Are the head and trunk orientations invariant in a natural driving position? pp. 2020-2021

J. Peng, X. Wang and L. Dennigner

3D musculoskeletal finite element analysis of the foot kinematics under muscle activation with and without ankle arthrodesis pp. 2022-2023

A. Perrier, M. Bucki, V. Luboz, N. Vuillerme and Y. Payan

Conception and evaluation of a 3D musculoskeletal finite element foot model pp. 2024-2025

A. Perrier, V. Luboz, M. Bucki, N. Vuillerme and Y. Payan

Reproducing topography and roughness of osteoconductive biomaterials in a microfluidic device pp. 2026-2027

E. Perrin, O. Français, B. Le Pioufle and B. David

How to use the elasticity of a badminton racket to increase its speed by 80%? pp. 2028-2029

M. Phomsoupha, G. Laffaye, C. Cohen and C. Clanet

Fracture characterization in cancellous bone specimens via surface difference evaluation of 3D registered pre- and post-compression micro-CT scans pp. 2030-2031

M. Prot, G. Dubois, T. J. Cloete, D. Saletti and S. Laporte

Costal cartilage elasticity can be estimated non-destructively using speed of sound pp. 2032-2033

M. Quesnot, A. Zorgani, F. Bermond, S. Catheline and D. Mitton

Anaerobic physical evaluation of young national rowers pp. 2034-2035

A. Rahmani, C. Giroux, A. Ben Abdessamie, F. Chorin, J. Lardy and H. Maciejewski

An ex vivo experimental study of strain and stiffness of different cadaveric mandible condyle sizes pp. 2036-2037

A. Ramos, R. Duarte and M. Mesnard

Friction coefficient analysis during high-heeled gait pp. 2038-2039

T. Rezgui, K. Ben Mansour and F. Marin

Relationship between jerk at the L3/L4 intervertebral level and COP mean velocity in bipedal and unipedal standing conditions pp. 2040-2041

N. Rezzoug and P. Gorce

Changes in muscle activation during gait of children with duchenne muscular dystrophy pp. 2042-2043

J. Ropars, M. Lemeur, C. Vuillerot, V. Tiffreau, S. Peudenier, J. M. Cuisset, Y. Pereon, F. Leboeuf, L. Delporte, Y. Delpierre, R. Gross and S. Brochard

Effects of racket weight distribution on forehand strokes in tennis pp. 2044-2045

J. Rossi, E. Berton and L. Vigouroux

Rupture of the muscle-tendon complex in tensile test. Comparison between experimentations and discrete element modeling pp. 2046-2047

A. Roux, T.-X. Haen, J. Lecompte, I. Iordanoff and S. Laporte

Estimation of 2D strain in abdominal organs during an impact based on ultrafast ultrasound images: a physical landmark-based approach pp. 2048-2049

A. Le Ruyet and P. Beillas

The influence of an arm sling on sit-to-stand of hemiplegic subjects pp. 2050-2051

A. Saadé, F. Gabrielli, S. Paganelli, P. Pudlo, M. Lempereur and O. Rémy-Néris

An experimental set-up to assess knee stiffness: a pilot study pp. 2052-2053

W. Samson and L. Chèze

On the uncertainty propagation in multiscale modeling of cortical bone elasticity pp. 2054-2055

V. Sansalone, D. Gagliardi, C. Desceliers, G. Haïat and S. Naili

Gait synthesis for an anthropomorphic human model with articulated feet pp. 2056-2057

A.P. Santos, F. Ben Amar, P. Bidaud and E. Desailly

Cluster analysis to investigate biomechanical changes during learning of manual wheelchair locomotion: a preliminary study pp. 2058-2059

C. Sauret, V. Siyou Fotso, J. Bascou, H. Pillet, E. Mephu-Nguifo, P. Fodé and P. Vaslin

Symbolic representation of propulsion cycles in manual wheelchair locomotion pp. 2060-2061

V. S. Siyou Fotso, E. Mephu Nguifo and Ph. Vaslin

Contribution of muscle hypertrophy to strength gain after training in elderly adults pp. 2062-2063

S. Stragier, S. Baudry, J. R. Poortmans, J. Duchateau and Alain Carpentier

Orientation of the intercostal muscle fibers in the human rib cage pp. 2064-2065

D. Subit, A. Glacet, M. Hamzah and J. Crandall

An intravascular coronary plaque elasticity reconstruction method using limited depth penetration ultrasound signals pp. 2066-2067

A. Tacheau, S. Le Floc’h, G. Finet, M. M. Doyley, R. I. Pettigrew, G. Cloutier and J. Ohayon

Robert Jones bandage pressure range assessment using a pressure mapping system and application to band calibration pp. 2068-2069

M. Taroni, J. Molimard, T. Cachon, E. Viguier and C. Carozzo

Anteroposterior compression of the spinal cord leading to cervical myelopathy: a finite element analysis pp. 2070-2071

M. Taso, L. Fradet, V. Callot and P. J. Arnoux

Using X-ray computed tomography for quantification of cell proliferation within a perfusion bioreactor pp. 2072-2073

R. Thibeaux, E. Perrin, B. Smaniotto, H. Duval, E. Vennat, D. Neron and B. David

Influence of the strategies and biomechanical parameters on the capacity to handle balance perturbation: a numerical assessment pp. 2074-2075

P. Vallée and T. Robert

Simulation of orthotic treatment in adolescent idiopathic scoliosis using a subject-specific finite element model pp. 2076-2077

C. Vergari, I. Courtois, E. Ebermeyer, H. Bouloussa, R. Vialle and W. Skalli

Whole limb push-off work in people with transtibial amputation during slope ascent pp. 2078-2079

C. Villa, B. Dauriac, J. Bascou, X. Bonnet, P. Fodé and H. Pillet

A preliminary study suggests that walk-to-run transition is consistent with mechanical optimization pp. 2080-2081

B. Watier, D. Villeger, A. Costes and P. Moretto

Influence of temporal pressure constraint on the biomechanical organisation of gait initiation made with or without an obstacle to clear pp. 2082-2083

E. Yiou, P. Fourcade, R. Artico and T. Caderby

Homogeneous and heterogeneous finite element models to predict radius bone strength in forward fall configuration pp. 2084-2085

E. Zapata, H. Follet and D. Mitton

In vitro study of valve-in-valve performance with the CoreValve self-expandable prosthesis implanted in different positions and sizes within the Trifecta surgical heart valve pp. 2086-2087

A.-S. Zenses, J. Mitchell, M. Evin, V. Stanova, J.-F. Obadia, P. Pibarot and R. Rieu

Characterization of dense particle suspensions under flow pp. 2088-2089

W. Zhu, Y. Knapp and V. Deplano

Corrigendum pp. 2090-2090

The Editors

Volume 18, issue 16, 2015

Localized strain measurements of the intervertebral disc annulus during biaxial tensile testing pp. 1737-1743

Thomas Karakolis and Jack P. Callaghan

Zirconia-based dental crown to support a removable partial denture: a three-dimensional finite element analysis using contact elements and micro-CT data pp. 1744-1752

Eduardo Passos Rocha, Rodolfo Bruniera Anchieta, Erika Oliveira de Almeida, Amilcar Chagas Freitas, Ana Paula Martini, Bruno Sales Sotto-Maior, Marco Antonio Luersen and Ching Chang Ko

Lamina replacement with titanium plate fixation improves spinal stability after total lumbar laminectomy pp. 1753-1759

Luming Nong, Dong Zhou, Nanwei Xu, Rui Du and Xijia Jiang

Effect of intervertebral translational flexibilities on estimations of trunk muscle forces, kinematics, loads, and stability pp. 1760-1767

Farshid Ghezelbash, Navid Arjmand and Aboulfazl Shirazi-Adl

Determination of the axial and circumferential mechanical properties of the skin tissue using experimental testing and constitutive modeling pp. 1768-1774

Alireza Karimi, Mahdi Navidbakhsh, Maedeh Haghighatnama and Afsaneh Motevalli Haghi

Gaussian modeling of the P-wave morphology time course applied to anticipate paroxysmal atrial fibrillation pp. 1775-1784

Arturo Martínez, Raúl Alcaraz and José Joaquín Rieta

Comparison of hinge microflow fields of bileaflet mechanical heart valves implanted in different sinus shape and downstream geometry pp. 1785-1796

Yee Han Kuan, Foad Kabinejadian, Vinh-Tan Nguyen, Boyang Su, Ajit P. Yoganathan and Hwa Liang Leo

Numerical simulation of wave propagation in a realistic model of the human external ear pp. 1797-1810

Mohaddeseh Fadaei, Omid Abouali, Homayoun Emdad, Mohammad Faramarzi and Goodarz Ahmadi

Accuracy of specimen-specific nonlinear finite element analysis for evaluation of radial diaphysis strength in cadaver material pp. 1811-1817

Yusuke Matsuura, Kazuki Kuniyoshi, Takane Suzuki, Yasufumi Ogawa, Koji Sukegawa, Tomoyuki Rokkaku, Andrew Ryan Thoreson, Kai-Nan An and Kazuhisa Takahashi

Reasons why dynamic compression plates are inferior to locking plates in osteoporotic bone: a finite element explanation pp. 1818-1825

Alisdair R. MacLeod, A. Hamish R.W. Simpson and Pankaj Pankaj

Neuromechanical control of the forearm muscles during gripping with sudden flexion and extension wrist perturbations pp. 1826-1834

Michael W.R. Holmes, Jimmy Tat and Peter J. Keir

Transient blood flow in elastic coronary arteries with varying degrees of stenosis and dilatations: CFD modelling and parametric study pp. 1835-1845

Jianhuang Wu, Guiying Liu, Wenhua Huang, Dhanjoo N. Ghista and Kelvin K.L. Wong

Examination of the protective roles of helmet/faceshield and directionality for human head under blast waves pp. 1846-1855

Hesam Sarvghad-Moghaddam, Mehdi Salimi Jazi, Asghar Rezaei, Ghodrat Karami and Mariusz Ziejewski

Results of automatic image registration are dependent on initial manual registration pp. 1856-1861

Joshua E. Johnson and Kenneth J. Fischer

Volume 18, issue 15, 2015

Contact of dual mobility implants: effects of cup wear and inclination pp. 1611-1621

M.S. Uddin

Effect of disc degeneration on the muscle recruitment pattern in upright posture: a computational analysis pp. 1622-1631

Young Eun Kim and Hae Won Choi

Spatiotemporal representation of 3D hand trajectory based on beta-elliptic models pp. 1632-1647

Houcine Boubaker, Nasser Rezzoug, Monji Kherallah, Philippe Gorce and Adel M. Alimi

Mathematica numerical simulation of peristaltic biophysical transport of a fractional viscoelastic fluid through an inclined cylindrical tube pp. 1648-1657

D. Tripathi and O. Anwar Bég

Registration of 2D histological sections with 3D micro-CT datasets from small animal vertebrae and tibiae pp. 1658-1673

Oleg Museyko, Robert Percy Marshall, Jing Lu, Andreas Hess, Georg Schett, Michael Amling, Willi A. Kalender and Klaus Engelke

Technical note: a multi-dimensional description of knee laxity using radial basis functions pp. 1674-1679

Adam J. Cyr and Lorin P. Maletsky

Investigation of pediatric neck response and muscle activation in low-speed frontal impacts pp. 1680-1692

Liqiang Dong, Haojie Mao, Guangyao Li and King H. Yang

A time–frequency approach to estimate critical time intervals in postural control pp. 1693-1703

Hongbo Zhang, Maury A. Nussbaum and Michael J. Agnew

Verification and comparison of four numerical schemes for a 1D viscoelastic blood flow model pp. 1704-1725

Xiaofei Wang, Jose-Maria Fullana and Pierre-Yves Lagrée

Finite element assessment of block-augmented total knee arthroplasty pp. 1726-1736

B. Frehill, A.D. Crocombe, Y. Agarwal and W.N. Bradley

Volume 18, issue 14, 2015

Validation of an efficient method of assigning material properties in finite element analysis of pelvic bone pp. 1495-1499

Vickie B. Shim, Mark Battley, Iain A. Anderson and Jacob T. Munro

Fluid–structure interaction analysis of the left coronary artery with variable angulation pp. 1500-1508

Jingliang Dong, Zhonghua Sun, Kiao Inthavong and Jiyuan Tu

Finite element analysis to characterize how varying patellar loading influences pressure applied to cartilage: model evaluation pp. 1509-1515

Kushal S. Shah, Archana Saranathan, Bharath Koya and John J. Elias

Numerical analysis of the influence of nucleus pulposus removal on the biomechanical behavior of a lumbar motion segment pp. 1516-1524

Juying Huang, Huagang Yan, Fengzeng Jian, Xingwen Wang and Haiyun Li

Estimation of surface heat flux and temperature distributions in a multilayer tissue based on the hyperbolic model of heat conduction pp. 1525-1534

Haw-Long Lee, Wen-Lih Chen, Win-Jin Chang and Yu-Ching Yang

An image-based method to automatically propagate bony landmarks: application to computational spine biomechanics pp. 1535-1542

Marcelo E. de Oliveira, Luiz M.G. Netto, Michael Kistler, Daniel Brandenberger, Philippe Büchler and Carol-C. Hasler

Stress analysis of a complete maxillary denture under various drop impact conditions: a 3D finite element study pp. 1543-1554

Emin Sunbuloglu

Sensitivity of a subject-specific musculoskeletal model to the uncertainties on the joint axes location pp. 1555-1563

Saulo Martelli, Giordano Valente, Marco Viceconti and Fulvia Taddei

Analytical and multibody modeling for the power analysis of standing jumps pp. 1564-1573

G. Palmieri, M. Callegari and S. Fioretti

A numerical analysis of the aortic blood flow pattern during pulsed cardiopulmonary bypass pp. 1574-1581

V. Gramigna, M.V. Caruso, M. Rossi, G.F. Serraino, A. Renzulli and G. Fragomeni

Explicit finite element modelling of heel pad mechanics in running: inclusion of body dynamics and application of physiological impact loads pp. 1582-1595

Wen-Ming Chen and Peter Vee-Sin Lee

Simulation of swallowing dysfunction and mechanical ventilation after a Montgomery T-tube insertion pp. 1596-1605

O. Trabelsi, M. Malvè, A. Mena Tobar and M. Doblaré

Dynamic simulation of tibial tuberosity realignment: model evaluation pp. 1606-1610

Tserenchimed Purevsuren, John J. Elias, Kyungsoo Kim and Yoon Hyuk Kim

Volume 18, issue 13, 2015

Validation tool for traction force microscopy pp. 1377-1385

A. Jorge-Peñas, A. Muñoz-Barrutia, E.M. de-Juan-Pardo and C. Ortiz-de-Solorzano

ADMET: ADipocyte METabolism mathematical model pp. 1386-1391

Alessio Micheloni, Gianni Orsi, Carmelo De Maria and Giovanni Vozzi

Quantification of trabecular spatial orientation from low-resolution images pp. 1392-1399

L. Lenaerts, A.J. Wirth and G.H. van Lenthe

Comparison of three artificial models of the magnetohydrodynamic effect on the electrocardiogram pp. 1400-1417

Julien Oster, Raul Llinares, Stephen Payne, Zion Tsz Ho Tse, Ehud Jeruham Schmidt and Gari D. Clifford

Measurement of the circumferential mechanical properties of the umbilical vein: experimental and numerical analyses pp. 1418-1426

Alireza Karimi, Mahdi Navidbakhsh, Taraneh Rezaee and Kamran Hassani

Numerical simulation of airflow and microparticle deposition in a synchrotron micro-CT-based pulmonary acinus model pp. 1427-1435

Toshihiro Sera, Kentaro Uesugi, Naoto Yagi and Hideo Yokota

Anisotropic hyperelastic behavior of soft biological tissues pp. 1436-1444

Z.-W. Chen, P. Joli and Z.-Q. Feng

Benchmarking of dynamic simulation predictions in two software platforms using an upper limb musculoskeletal model pp. 1445-1458

Katherine R. Saul, Xiao Hu, Craig M. Goehler, Meghan E. Vidt, Melissa Daly, Anca Velisar and Wendy M. Murray

Finite element analysis of Stryker Xia pedicle screw in artificial bone samples with and without supplemental cement augmentation pp. 1459-1467

Ferris M. Pfeiffer, Theodore J. Choma and Rebecca Kueny

Effect of cup inclination on predicted contact stress-induced volumetric wear in total hip replacement pp. 1468-1473

B. Rijavec, R. Košak, M. Daniel, V. Kralj-IgliČ and D. Dolinar

A three-dimensional approach to pennation angle estimation for human skeletal muscle pp. 1474-1484

Dongwoon Lee, Zhi Li, Qazi Zain Sohail, Ken Jackson, Eugene Fiume and Anne Agur

A coupled model of fast axonal transport of organelles and slow axonal transport of tau protein pp. 1485-1494

I.A. Kuznetsov and A.V. Kuznetsov

Volume 18, issue 12, 2015

Biomechanical effects of plate area and locking screw on medial open tibial osteotomy pp. 1263-1271

Chu-An Luo, Shang-Chih Lin, Su-Yang Hwa, Chun-Ming Chen and Ching-Shiow Tseng

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces pp. 1272-1279

Christoph Engelhardt, Valérie Malfroy Camine, David Ingram, Philippe Müllhaupt, Alain Farron, Dominique Pioletti and Alexandre Terrier

Effects of obesity on occupant responses in frontal crashes: a simulation analysis using human body models pp. 1280-1292

Xiangnan Shi, Libo Cao, Matthew P. Reed, Jonathan D. Rupp and Jingwen Hu

Automated generation of tissue-specific three-dimensional finite element meshes containing ellipsoidal cellular inclusions pp. 1293-1304

Craig J. Bennetts, Scott Sibole and Ahmet Erdemir

Systolic fluid–structure interaction model of the congenitally bicuspid aortic valve: assessment of modelling requirements pp. 1305-1320

May Y.S. Kuan and Daniel M. Espino

A numerical investigation of flow around octopus-like arms: near-wake vortex patterns and force development pp. 1321-1339

A. Kazakidi, V. Vavourakis, D.P. Tsakiris and J.A. Ekaterinaris

Biomechanical analysis and comparison of 12 dental implant systems using 3D finite element study pp. 1340-1348

Rui Liang, Weihua Guo, Xiangchen Qiao, Hailin Wen, Mei Yu, Wei Tang, Lei Liu, Yongtao Wei and Weidong Tian

Influence of ingrowth regions on bone remodelling around a cementless hip resurfacing femoral implant pp. 1349-1357

Ifaz T. Haider, Andrew D. Speirs, Paul E. Beaulé and Hanspeter Frei

Inhalation pressure distributions for medical gas mixtures calculated in an infant airway morphology model pp. 1358-1366

Laure Gouinaud, Ira Katz, Andrew Martin, Jean Hazebroucq, Joëlle Texereau and Georges Caillibotte

An enhanced version of a bone-remodelling model based on the continuum damage mechanics theory pp. 1367-1376

M. Mengoni and J.P. Ponthot

Volume 18, issue 11, 2015

Finite element formulation and analysis for an arterial wall with residual and active stresses pp. 1143-1159

Naoki Kida and Taiji Adachi

An orthotropic viscoelastic material model for passive myocardium: theory and algorithmic treatment pp. 1160-1172

F. Barış Can Cansız, Hüsnü Dal and Michael Kaliske

Numerical simulation of fluid–structure interaction in bypassed DeBakey III aortic dissection pp. 1173-1180

Aike Qiao, Wencong Yin and Bo Chu

Effect of material and structural factors on fracture behaviour of mineralised collagen microfibril using finite element simulation pp. 1181-1190

Abdelwahed Barkaoui, Ridha Hambli and João Manuel R.S. Tavares

Approximation of the functional kinematics of posterior stabilised total knee replacements using a two-dimensional sagittal plane patello-femoral model: comparing model approximation to measurement pp. 1191-1199

Bernard Van Duren, Hemant Pandit, David Murray and Harinderjit Gill

Numerical simulation of non-Newtonian blood flow dynamics in human thoracic aorta pp. 1200-1216

A.D. Caballero and S. Laín

An improved OpenSim gait model with multiple degrees of freedom knee joint and knee ligaments pp. 1217-1224

Hang Xu, Donald Bloswick and Andrew Merryweather

A complete structural performance analysis and modelling of hydroxyapatite scaffolds with variable porosity pp. 1225-1237

Enrique Gallegos-Nieto, Hugo I. Medellín-Castillo and Dirk F. de Lange

Computed tomography-based joint locations affect calculation of joint moments during gait when compared to scaling approaches pp. 1238-1251

Ward Bartels, Jan Demol, Frederik Gelaude, Ilse Jonkers and Jos Vander Sloten

Pedicle screw-based posterior dynamic stabilisation of the lumbar spine: cadaver investigation and a finite element study pp. 1252-1261

T. Oktenoglu, D.U. Erbulut, A. Kiapour, A.F. Ozer, I. Lazoglu, T. Kaner, M. Sasani and V.K. Goel

Volume 18, issue 10, 2015

A new dynamic model of the wheelchair propulsion on straight and curvilinear level-ground paths pp. 1031-1043

Félix Chénier, Pascal Bigras and Rachid Aissaoui

Implementation and validation of thoracic side impact injury prediction metrics in a human body model pp. 1044-1055

Adam J. Golman, Kerry A. Danelson, James P. Gaewsky and Joel D. Stitzel

Comparison between mechanical stress and bone mineral density in the femur after total hip arthroplasty by using subject-specific finite element analyses pp. 1056-1065

Hiroyuki Ike, Yutaka Inaba, Naomi Kobayashi, Yasuhide Hirata, Yohei Yukizawa, Chie Aoki, Hyonmin Choe and Tomoyuki Saito

Computational fluid dynamics simulation to evaluate aortic coarctation gradient with contrast-enhanced CT pp. 1066-1071

Antonino Rinaudo, Giuseppe D'Ancona, Roberto Baglini, Andrea Amaducci, Fabrizio Follis, Michele Pilato and Salvatore Pasta

Stratification of a population of intracranial aneurysms using blood flow metrics pp. 1072-1082

Rohini Retarekar, Manasi Ramachandran, Benjamin Berkowitz, Robert E. Harbaugh, David Hasan, Robert H. Rosenwasser, Christopher S. Ogilvy and Madhavan L. Raghavan

Patellar tendon and hamstring moment-arms and cross-sectional area in patients with anterior cruciate ligament reconstruction and controls pp. 1083-1089

Eleftherios Kellis, Evaggelos Karagiannidis and Glykeria Patsika

Biomechanical behaviour of cancellous bone on patellofemoral arthroplasty with Journey prosthesis: a finite element study pp. 1090-1098

A.P.G. Castro, António Completo, José A. Simões and Paulo Flores

Flow pattern analysis in a highly stenotic patient-specific carotid bifurcation model using a turbulence model pp. 1099-1107

Zhi-Yong Li, Felicia P.P. Tan, Giulia Soloperto, Nigel B. Wood, Xiao Y. Xu and Jonathan H. Gillard

A novel method to evaluate error in anatomical marker placement using a modified generalized Procrustes analysis pp. 1108-1116

Sean T. Osis, Blayne A. Hettinga, Shari L. Macdonald and Reed Ferber

Numerical investigations of the mechanical properties of a braided non-vascular stent design using finite element method pp. 1117-1125

Xiao-Yu Ni, Chang-Wang Pan and B. Gangadhara Prusty

Electrocardiogram signal quality assessment using an artificially reconstructed target lead pp. 1126-1141

H. Naseri and M.R. Homaeinezhad

Volume 18, issue 9, 2015

Visualising gait symmetry/asymmetry from acceleration data pp. 923-930

Mitsuru Yoneyama

Texture analysis of the 3D collagen network and automatic classification of the physiology of articular cartilage pp. 931-943

Xiaojuan Duan, Jianping Wu, Benjamin Swift and Thomas Brett Kirk

A numerical study of muco-ciliary transport under the condition of diseased cilia pp. 944-951

P.G. Jayathilake, D.V. Le, Zhijun Tan, H.P. Lee and B.C. Khoo

Merging multi-camera data to reduce motion analysis instrumental errors using Kalman filters pp. 952-960

Cédric Schwartz, Vincent Denoël, Bénédicte Forthomme, Jean-Louis Croisier and Olivier Brüls

Conventional and complex modal analyses of a finite element model of human head and neck pp. 961-973

Kwong Ming Tse, Long Bin Tan, Siak Piang Lim and Heow Pueh Lee

Development and validation of a human biomechanical model for rib fracture and thorax injuries in blunt impact pp. 974-980

Zhihua Cai, Fengchong Lan and Jiqing Chen

Experimental and computational investigation of the patient-specific abdominal aortic aneurysm pressure field pp. 981-992

R. Antón, C.-Y. Chen, M.-Y. Hung, E.A. Finol and K. Pekkan

Improved accuracy in 3D analysis using DLT after lens distortion correction pp. 993-1002

Marcel M. Rossi, Amanda P. Silvatti, Fabio A.S. Dias and Ricardo M.L. Barros

Driving a musculoskeletal model with inertial and magnetic measurement units pp. 1003-1013

Bart H.W. Koning, Marjolein M. van der Krogt, Chris T.M. Baten and Bart F.J.M. Koopman

Surface EMG-force modelling for the biceps brachii and its experimental evaluation during isometric isotonic contractions pp. 1014-1023

Hua Cao, Sofiane Boudaoud, Frédéric Marin and Catherine Marque

Prediction of globe rupture caused by primary blast: a finite element analysis pp. 1024-1029

Xiaoyu Liu, Lizhen Wang, Chao Wang, Jie Fan, Songyang Liu and Yubo Fan

Volume 18, issue 8, 2015

Validation of numerical flow simulations against phantom measurements in different type B aortic dissection scenarios pp. 805-815

Eduardo Soudah, Paula Rudenick, Maurizio Bordone, Bart Bijnens, David García-Dorado, Arturo Evangelista and Eugenio Oñate

Numerical implementation of constitutive model for arterial layers with distributed collagen fibre orientations pp. 816-828

Pavel Skacel and Jiri Bursa

Local versus global optimal sports techniques in a group of athletes pp. 829-838

Aurore Huchez, Diane Haering, Patrice Holvoët, Franck Barbier and Mickael Begon

Anisotropic post-yield response of cancellous bone simulated by stress–strain curves of bulk equivalent structures pp. 839-846

Alexander Tsouknidas, Georgios Maliaris, Savvas Savvakis and Nikolaos Michailidis

An optimisation-based model for full-body upright reaching movements pp. 847-860

Daohang Sha and James S. Thomas

Multi-component modelling of human brain tissue: a contribution to the constitutive and computational description of deformation, flow and diffusion processes with application to the invasive drug-delivery problem pp. 861-879

Wolfgang Ehlers and Arndt Wagner

The importance of femur/acetabulum cartilage in the biomechanics of the intact hip: experimental and numerical assessment pp. 880-889

R.J. Duarte, A. Ramos, A. Completo, C. Relvas and J.A. Simões

Structural parameters determining the strength of the porcine vertebral body affected by tumours pp. 890-899

Francisco Sahli, Jorge Cuellar, Alfonso Pérez, Aaron J. Fields, Mauricio Campos and Jorge Ramos-Grez

Computational simulation of the early stage of bone healing under different configurations of locking compression plates pp. 900-913

Saeed Miramini, Lihai Zhang, Martin Richardson, Marinis Pirpiris, Priyan Mendis, Kunle Oloyede and Glenn Edwards

Mechanism of lens capsular rupture following blunt trauma: a finite element study pp. 914-921

Xiaoyu Liu, Lizhen Wang, Chengfei Du, Deyu Li and Yubo Fan

Volume 18, issue 7, 2015

Three-dimensional finite element analysis of stress distribution in retention screws of different crown–implant ratios pp. 689-696

S.L.D. Moraes, E.P. Pellizzer, F.R. Verri, J.F. Santiago Jr and J.V.L. Silva

Finite element analysis of a hemi-pelvis: the effect of inclusion of cartilage layer on acetabular stresses and strain pp. 697-710

Rajesh Ghosh, Bidyut Pal, Debatri Ghosh and Sanjay Gupta

Finite element analysis of surgical correction via a minimally invasive approach pp. 711-720

Sara C. Neves, Acm Pinho, Jaime C. Fonseca, Nuno F. Rodrigues, Tiago Henriques-Coelho, Jorge Correia-Pinto and João L. Vilaça

Principal component analysis in construction of 3D human knee joint models using a statistical shape model method pp. 721-729

Tsung-Yuan Tsai, Jing-Sheng Li, Shaobai Wang, Pingyue Li, Young-Min Kwon and Guoan Li

Modelling hollow organs for impact conditions: a simplified case study pp. 730-739

Anurag Soni and Philippe Beillas

Combined finite element and multibody musculoskeletal investigation of a fractured clavicle with reconstruction plate pp. 740-748

Marie Cronskär, John Rasmussen and Mats Tinnsten

Critical analysis of musculoskeletal modelling complexity in multibody biomechanical models of the upper limb pp. 749-759

Carlos Quental, João Folgado, Jorge Ambrósio and Jacinto Monteiro

Numerical investigation of haemodynamics in a helical-type artery bypass graft using non-Newtonian multiphase model pp. 760-768

Jun Wen, Kai Liu, Khashayar Khoshmanesh, Wentao Jiang and Tinghui Zheng

Numerical model (switchable/dual model) of the human head for rigid body and finite elements applications pp. 769-781

Stefan Tabacu

Objective classification of scapular kinematics in participants with movement faults of the scapula on clinical assessment pp. 782-789

Martin B. Warner, Gemma Whatling, Peter R. Worsley, Sarah Mottram, Paul H. Chappell, Catherine A. Holt and Maria J. Stokes

Evaluation of the strain-line patterns in a human left ventricle: a simulation study pp. 790-798

S. Gabriele, P. Nardinocchi and V. Varano

A computational model for dynamic analysis of the human gait pp. 799-804

Claysson Vimieiro, Emanuel Andrada, Hartmut Witte and Marcos Pinotti

Volume 18, issue 6, 2015

A finite element model of the face including an orthotropic skin model under tension pp. 571-582

Cormac Flynn, Ian Stavness, John Lloyd and Sidney Fels

Modelling organelle transport after traumatic axonal injury pp. 583-591

I.A. Kuznetsov and A.V. Kuznetsov

Integration of marker and force data to compute three-dimensional joint moments of the thumb and index finger digits during pinch pp. 592-606

Raviraj Nataraj and Zong-Ming Li

Optimising muscle parameters in musculoskeletal models using Monte Carlo simulation pp. 607-617

Erik B. Reed, Andrea M. Hanson and Peter R. Cavanagh

Isolated effect of geometry on mitral valve function for model development pp. 618-627

Andrew William Siefert, Jean-Pierre Michel Rabbah, Neelakantan Saikrishnan, Karyn Susanne Kunzelman and Ajit Prithivaraj Yoganathan

Determining possible thrombus sites in an extracorporeal device, using computational fluid dynamics-derived relative residence time pp. 628-634

N. Gorring, L. Kark, A. Simmons and T. Barber

Helmet liner evaluation to mitigate head response from primary blast exposure pp. 635-645

Philip A. Lockhart and Duane S. Cronin

Evaluation of the mechanical efficiency of knee braces based on computational modeling pp. 646-661

Baptiste Pierrat, Jérôme Molimard, Laurent Navarro, Stéphane Avril and Paul Calmels

Numerical model for intraosseous infusion of the human calvarium for hydrocephalus shunting pp. 662-675

E. Nzekwu, M. Louie, D. Scott, H. Lundgren, J.A. Pugh, L.W. Kostiuk and J.P. Carey

Geometric sensitivity of patient-specific finite element models of the spine to variability in user-selected anatomical landmarks pp. 676-688

J.P. Little and C.J. Adam

Volume 18, issue 5, 2015

A two-dimensional model for stress driven diffusion in bone tissue pp. 457-467

Gustav Lindberg, Leslie Banks-Sills, Per Ståhle and Ingrid Svensson

Effect of membrane stiffness and cytoskeletal element density on mechanical stimuli within cells: an analysis of the consequences of ageing in cells pp. 468-476

Feng Xue, Alex B. Lennon, Katey K. McKayed, Veronica A. Campbell and Patrick J. Prendergast

On modelling large deformations of heterogeneous biological tissues using a mixed finite element formulation pp. 477-484

Tim Wu, Alice P.-L. Hung, Peter Hunter and Kumar Mithraratne

Identification process based on shear wave propagation within a phantom using finite element modelling and magnetic resonance elastography pp. 485-491

Gwladys E. Leclerc, Fabrice Charleux, Marie-Christine Ho Ba Tho and Sabine F. Bensamoun

The influence of yield surface shape and damage in the depth-dependent response of bone tissue to nanoindentation using spherical and Berkovich indenters pp. 492-505

Johann Jakob Schwiedrzik and Philippe Kurt Zysset

Muscle moment-arms: a key element in muscle-force estimation pp. 506-513

David Ingram, Christoph Engelhardt, Alain Farron, Alexandre Terrier and Philippe Müllhaupt

Computational model of particle deposition in the nasal cavity under steady and dynamic flow pp. 514-526

Paraskevi Karakosta, Aleck H. Alexopoulos and Costas Kiparissides

Is a standalone inertial measurement unit accurate and precise enough for quantification of movement symmetry in the horse? pp. 527-532

Charlotte Brighton, Emil Olsen and Thilo Pfau

Deriving indicators for breast conserving surgery using finite element analysis pp. 533-544

D. Thanoon, M. Garbey and B.L. Bass

A finite element evaluation of the moment arm hypothesis for altered vertebral shear failure force pp. 545-555

Samuel J. Howarth, Thomas Karakolis and Jack P. Callaghan

Effect of intercostal muscle and costovertebral joint material properties on human ribcage stiffness and kinematics pp. 556-570

Matthew Kindig, Zuoping Li, Richard Kent and Damien Subit

Volume 18, issue 4, 2015

Knee joint passive stiffness and moment in sagittal and frontal planes markedly increase with compression pp. 339-350

H. Marouane, A. Shirazi-Adl and M. Adouni

Modelling the glycocalyx–endothelium–erythrocyte interaction in the microcirculation: a computational study pp. 351-361

Giuseppe Pontrelli, Ian Halliday, Tim J. Spencer, Carola S. König and Michael W. Collins

An improved inverse dynamics formulation for estimation of external and internal loads during human sagittal plane movements pp. 362-375

Wojciech Blajer, Krzysztof Dziewiecki and Zenon Mazur

A fast bilateral filter with application to artefact reduction pp. 376-381

Dangguo Shao, Ming Zhong and Dong C. Liu

A new training algorithm using artificial neural networks to classify gender-specific dynamic gait patterns pp. 382-390

Andre Andrade, Marcelo Costa, Leopoldo Paolucci, Antônio Braga, Flavio Pires, Herbert Ugrinowitsch and Hans-Joachim Menzel

A geometric approach to study the contact mechanisms in the patellofemoral joint of normal versus patellofemoral pain syndrome subjects pp. 391-400

Kamrul Islam, Kajsa Duke, Tanvir Mustafy, Samer M. Adeeb, Janet L. Ronsky and Marwan El-Rich

A semi-automated method for patient-specific computational flow modelling of left ventricles pp. 401-413

Vinh-Tan Nguyen, Chong Jia Loon, Hoang Huy Nguyen, Zhong Liang and Hwa Liang Leo

Comparative study of flow in right-sided and left-sided aortas: numerical simulations in patient-based models pp. 414-425

Michalis Xenos, Dimitrios Karakitsos, Nicos Labropoulos, Apostolos Tassiopoulos, Thomas V. Bilfinger and Danny Bluestein

Quantitative analysis of fall risk using TUG test pp. 426-437

Nor Aini Zakaria, Yutaka Kuwae, Toshiyo Tamura, Kotaro Minato and Shigehiko Kanaya

Mathematical modelling of implant in an operated hernia for estimation of the repair persistence pp. 438-445

Izabela Lubowiecka

Micro-computed tomography image-based evaluation of 3D anisotropy degree of polymer scaffolds pp. 446-455

Úrsula Pérez-Ramírez, Jesús Javier López-Orive, Estanislao Arana, Manuel Salmerón-Sánchez and David Moratal

Volume 18, issue 3, 2015

Behaviour of orthotropic surgical implant in hernia repair due to the material orientation and abdomen surface deformation pp. 223-232

Izabela Lubowiecka

A 3D finite element model for hyperthermia injury of blood-perfused skin pp. 233-242

Domoina Ratovoson, Vincent Huon and Franck Jourdan

Estimation of ligament strains and joint moments in the ankle during a supination sprain injury pp. 243-248

Feng Wei, Daniel Tik-Pui Fong, Kai-Ming Chan and Roger C. Haut

Elucidating the scapulo-humeral rhythm calculation: 3D joint contribution method pp. 249-258

Xavier Robert-Lachaine, Patrick Marion, Véronique Godbout, Jacinte Bleau and Mickael Begon

Numerical simulation of load-induced bone structural remodelling using stress-limit criterion pp. 259-268

Ali Marzban, Hamid Nayeb-Hashemi and Ashkan Vaziri

Influence of mastication and edentulism on mandibular bone density pp. 269-281

Hsuan-Yu Chou, Devesh Satpute, Ali Müftü, Srinivasan Mukundan and Sinan Müftü

Role of differential adhesion in cell cluster evolution: from vasculogenesis to cancer metastasis pp. 282-292

Jaykrishna Singh, Fazle Hussain and Paolo Decuzzi

Cross-sectional neck response of a total human body FE model during simulated frontal and side automobile impacts pp. 293-315

Nicholas A. White, Daniel P. Moreno, F. Scott Gayzik and Joel D. Stitzel

Numerical investigation of mechanical effects caused by various fixation positions on a new radius intramedullary nail pp. 316-324

A. Çelik, H. Kovacı, G. Saka and İ. Kaymaz

Micro-structurally detailed model of a therapeutic hydrogel injectate in a rat biventricular cardiac geometry for computational simulations pp. 325-331

Mazin S. Sirry, Neil H. Davies, Karen Kadner, Laura Dubuis, Muhammad G. Saleh, Ernesta M. Meintjes, Bruce S. Spottiswoode, Peter Zilla and Thomas Franz

Mechanical evaluation of a tissue-engineered zone of calcification in a bone–hydrogel osteochondral construct pp. 332-337

Jérôme Hollenstein, Alexandre Terrier, Esther Cory, Albert C. Chen, Robert L. Sah and Dominique P. Pioletti

Volume 18, issue 2, 2015

Modelling human eye under blast loading pp. 107-115

L. Esposito, C. Clemente, N. Bonora and T. Rossi

Ultrasound-based subject-specific parameters improve fascicle behaviour estimation in Hill-type muscle model pp. 116-123

Pauline Gerus, Guillaume Rao and Eric Berton

Microstructural residual stress in particle-filled dental composite pp. 124-129

Ondřej Prejzek, Miroslav Španiel and Tomáš Mareš

A review of numerical methods for red blood cell flow simulation pp. 130-140

Meongkeun Ju, Swe Soe Ye, Bumseok Namgung, Seungkwan Cho, Hong Tong Low, Hwa Liang Leo and Sangho Kim

Implementation of a gait cycle loading into healthy and meniscectomised knee joint models with fibril-reinforced articular cartilage pp. 141-152

Mika E. Mononen, Jukka S. Jurvelin and Rami K. Korhonen

Improving stability of locking compression plates through a design modification: a computational investigation pp. 153-161

D. Anitha, Shamal Das De, Khong Kok Sun, Hitendra K. Doshi and Taeyong Lee

Stochastic multi-scale prediction on the apparent elastic moduli of trabecular bone considering uncertainties of biological apatite (BAp) crystallite orientation and image-based modelling pp. 162-174

Khairul Salleh Basaruddin, Naoki Takano and Takayoshi Nakano

Development and validation of a discretised multi-body spine model in LifeMOD for biodynamic behaviour simulation pp. 175-184

K.T. Huynh, I. Gibson, B.N. Jagdish and W.F. Lu

Combining extreme learning machines using support vector machines for breast tissue classification pp. 185-191

Mohammad Reza Daliri

On ballistic parameters of less lethal projectiles influencing the severity of thoracic blunt impacts pp. 192-200

Julien Pavier, André Langlet, Nicolas Eches and Jean-François Jacquet

A diffusion tensor-based finite element model of microdialysis in the deep brain pp. 201-212

Elin Diczfalusy, Mats Andersson and Karin Wårdell

Real-time interactive isosurfacing: a new method for improving marching isosurfacing algorithm output and efficiency pp. 213-220

Greg S. Ruthenbeck, Fabian S. Lim and Karen J. Reynolds

Introduction to Cell Mechanics and Mechanobiology pp. 221-222

Amit Gefen

Volume 18, issue 1, 2015

Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; Part II: control development and testing pp. 1-14

Kara L. Hall, Chandler A. Phillips, David B. Reynolds, Stanley R. Mohler, Dana B. Rogers and Amy T. Neidhard-Doll

Corroboration of computational models for mechanoregulated stem cell differentiation pp. 15-23

Hanifeh Khayyeri, Hanna Isaksson and Patrick J. Prendergast

Simulation-based assessment for construction helmets pp. 24-37

James Long, James Yang, Zhipeng Lei and Daan Liang

Preoperative analysis of the stability of fit of a patient-specific surgical guide pp. 38-47

Joyce Van den Broeck, Roel Wirix-Speetjens and Jos Vander Sloten

Comparative analysis of realistic CT-scan and simplified human airway models in airflow simulation pp. 48-56

Nasrul Hadi Johari, Kahar Osman, Nor Harris N. Helmi and Mohammed A. Rafiq Abdul Kadir

A gait index may underestimate changes of gait: a comparison of the Movement Deviation Profile and the Gait Deviation Index pp. 57-63

Gabor J. Barton, Malcolm B. Hawken, Gill Holmes and Michael H. Schwartz

The influence of the geometry of the porcine cornea on the biomechanical response of inflation tests pp. 64-77

Anna Pandolfi and Federica Boschetti

An informational framework to predict reaction of constraints using a reciprocally connected knee model pp. 78-89

Wangdo Kim, Antonio P. Veloso, Duarte Araújo, Veronica Vleck and Filipa João

Effect of spatial inlet velocity profiles on the vortex formation pattern in a dilated left ventricle pp. 90-96

Bee Ting Chan, Einly Lim, Chi Wei Ong and Noor Azuan Abu Osman

A systematic muscle model covering regions from the fast ramp stretches in the muscle fibres to the relatively slow stretches in the human triceps surae pp. 97-106

Youjiro Tamura, Akira Ito and Andrew G. Cresswell