Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 14, issue S1, 2011

Editorial pp. 1-1

Jean Crolet

36 Congress of the Société de Biomécanique pp. 3-10

The Editors

A new segmental method for measuring limbs and trunk electrical resistances with eight electrodes on hands and feet pp. 11-13

S. Bousbiat, M. Jaffrin and E. Dongmo

Modelling of stent-graft delivery system pp. 15-16

E. Neumanová and L. Čapek

What is the number of independent degrees of freedom of the trapeziometacarpal joint? Preliminary results pp. 17-18

L. Cheze, R. Dumas, J. Comtet and C. Rumelhart

Shoulder muscle forces during abduction with subscapularis deficiency after total shoulder arthroplasty pp. 19-20

X. Larrea, A. Farron, D. Pioletti and A. Terrier

Design of high-flexion total knee prosthesis considering activities of North African peoples pp. 21-23

Y. Benabid, A. Aoussat and T. Chettibi

Analysis of existing injury criteria to evaluate the severity of thoracic impact injury pp. 25-26

J. Pavier, A. Langlet, N. Eches, J. Jacquet and R. Cayzac

Vibration of the upper limbs in cycling pp. 27-28

X. Chiementin, W. Bertucci, S. Crequy, F. Bolaers and P. Estocq

Effects of a pore size and a pore location on the stress at the crack tip of fatigue bone specimen during one cycle: finite element simulation pp. 29-30

N. Ihaddadène and R. Ihaddadène

Femoral head diameter and carbon composition effect on wear of metal-on-metal hip replacements pp. 31-32

R. Ihaddadene, S. Affatato, M. Zavalloni, S. Bouzid and M. Viceconti

Carbon composition effects on wear behaviour and wear mechanisms of metal-on-metal hip prosthesis pp. 33-34

R. Ihaddadene, S. Affatato, M. Zavalloni, S. Bouzid and M. Viceconti

Strength exercise monitoring: what to evaluate and how? pp. 35-36

L. Fradet and F. Marin

Accuracy of scapular motion by double calibration pp. 37-39

M. Lempereur, S. Brochard and O. Remy-Neris

Effect of whole-body vibration frequency and amplitude in heart rate and fatigue perception pp. 41-43

Y. El Aji, M. Soudain-Pineau, P. Joly and W. Bertucci

Prediction of the morphological and mechanical properties of a novel scaffold for anterior cruciate ligament tissue engineering pp. 45-46

C. Laurent, D. Durville, J.-F. Ganghoffer and R. Rahouadj

Adolescent idiopathic scoliosis young female rib hump: normative biomechanical data study pp. 47-48

J.-Ph. Berteau, Ph. Lasaygues, M. Pithioux and P. Chabrand

Muscular determinants of performance in BMX during exercises of maximal intensity pp. 49-51

P. Debraux and W. Bertucci

Determining factors of the sprint performance in high-level BMX riders pp. 53-55

P. Debraux and W. Bertucci

Measurements of strain in bicycle frame through different conditions of test pp. 57-59

A. Manolova and W. Bertucci

Scapulohumeral rhythm assessment with inertial sensors: preliminary results pp. 61-63

J.-M. Grand and M. Geronimi

Rolling resistance index of manual wheelchairs pp. 65-66

C. Sauret, P. Vaslin, J. Bascou, H. Pillet and F. Lavaste

Dynamic calibration of a wheelchair six-component wheel dynamometer rolling on the floor pp. 67-69

C. Sauret, Y. Couetard and P. Vaslin

Validation of Echo-PIV method through PIV comparisons in the assessment of ventricular flows pp. 71-72

C. Guivier-Curien, C. Guerin, D. Tanne, M. Lugiez, M. Evin, M. Menard, R. Rieu and D. Coisne

Characterisation of failure in human aortic tissue using digital image correlation pp. 73-74

J.-H. Kim, P. Badel, A. Duprey, J. Favre and S. Avril

Modelling the musculoskeletal system of the hand and forearm for ergonomic applications pp. 75-76

N. Vignais and F. Marin

A study of constrained models for the kinematic analysis of the human knee joint pp. 77-79

I. Reichl, W. Auzinger, H. Schmiedmayer and E. Weinmüller

A 3D model of trabecular bone remodelling based on cellular activities pp. 81-82

C. Yone, J. Milan, J. Rossi and P. Chabrand

A new experimental set-up based on a parallel cable robot for analysis and control of human motion pp. 83-85

S. Bennour, M. Harshe, L. Romdhane and J.-P. Merlet

Manipulability of the upper limb during wheelchair propulsion pp. 87-89

J. Jacquier-Bret, N. Louis, N. Rezzoug and P. Gorce

Introducing a method to compare the hand position of drivers under wheel steering task: preliminary results pp. 91-93

J. Schiro, F. Gabrielli, Ph. Pudlo, F. Barbier and M. Djemai

Sprint and vertical jump performances of football players of Algerian team before the FIFA World Cup 2010 pp. 95-97

W. Bertucci, A. Brikci and J. Sene

Quantitative investigation for properties of osteoporotic cortical bone: a numerical study pp. 99-101

M. Stroe, M. Racila and J. Crolet

Robotic hands: mechatronic design and compliance control of a self-sensing finger prototype pp. 103-105

J. Martin, B. Huard, M. Robert and M. Grossard

Simulation of neutrophil motion and deformation: influence of rheology and flow configuration pp. 107-109

M. Le Roux and J. Magnaudet

Measurement and interpretation of viscous interactions during contact between bone and prosthetic materials pp. 111-113

D. Areiza, A. Bonnet, A. Barbas and P. Lipinski

Biomechanics of rapid movements in plants: poroelastic measurements at the cell scale pp. 115-117

M. Colombani and Y. Forterre

Optimisation of mechanical properties of Ti–Nb binary alloys for biomedical applications pp. 119-120

W. Elmay, E. Patoor, B. Bolle, T. Gloriant, F. Prima, A. Eberhardt and P. Laheurte

Numerical study of the influence of wall compliance on the haemodynamics in a patient-specific arteriovenous fistula pp. 121-123

I. Decorato, Z. Kharboutly, C. Legallais and A. Salsac

Subject-specific numerical estimation of the temporomandibular joint reaction force during mouth opening and closing movements pp. 125-127

E. Brosses, D. Areiza, A.-S. Bonnet and P. Lipinski

A physical model for brain ventricle dynamics pp. 129-131

Issyan Tekaya, Robert Bouzerar and Roger Bouzerar

Numerical determination of the lacuno-canalicular permeability of bone pp. 133-135

S. Lemonnier, S. Naili, C. Oddou and T. Lemaire

Experimental and numerical analysis of a V-Y advancement flap on human skin pp. 137-138

D. Remache, J. Pauchot, J. Chambert, L. Capek and E. Jacquet

Variation of biomechanical properties of newly formed bone tissue determined by nanoindentation as a function of healing time pp. 139-140

R. Vayron, E. Barthel, V. Mathieu, E. Soffer, F. Anagnostou and G. Haiat

Calcium fluxes within cortical bone fluid may affect osteocyte mechanosensitivity pp. 141-142

J. Kaiser, T. Lemaire, S. Naili, S. Komarova and V. Sansalone

What is the nature of bone electricity? pp. 143-144

T. Lemaire, J. Kaiser, V. Sansalone, E. Rohan and S. Naili

Nutrient convection and diffusion modelling in the intervertebral disc pp. 145-146

M. Etienne, O. Boiron, P. Tropiano and V. Deplano

Improvement of a four-implant retained bridge for totally edentulous patients pp. 147-148

V. Berry-Kromer, L. Favot, M. Haboussi and T. Zineb

Comparing invasive and oscillometric blood pressure measurements pp. 149-151

G. Fahd, O. Mokhtar, O. Boiron, I. Morgado, F. Paganelli and V. Deplano

Kinematic and dynamic analysis of gait determinants theory pp. 153-154

C. Hayot, S. Sakka and P. Lacouture

Intra-cytoplasmic sperm injection simulator using biomechanical models pp. 155-157

H. Ladjal, J. Hanus and A. Ferreira

Traction forces of cancer cells pp. 159-160

V. Peschetola, V. Laurent, A. Duperray, L. Preziosi, D. Ambrosi and C. Verdier

Simulation of pelvic mobility: topology optimisation of ligamentous system pp. 161-162

A. Vallet, C. Rubod, J. Witz, M. Brieu and M. Cosson

Mathematical model for fluid flow in consecutive bifurcations pp. 163-165

W. Miladi and J. Crolet

Skin wettability and friction coefficient: an and study pp. 167-168

A. Elkhyat, J. Sainthillier, F. Ferial, T. Lihoreau, S. Mary, A. Jeudy and P. Humbert

Evaluation of a bioactive glass-based composite screw pp. 169-171

E. Pacard, S. Lasnier, A. Bouland and R. Zenati

Effectiveness of force application in sprint running: definition of concept and relationship with performance pp. 173-175

J. Morin, P. Samozino and P. Edouard

Modelization of osteoporosis process: a possible explanation pp. 177-179

M. Stroe and J. Crolet

Adherence modulation in single stepping pp. 181-182

S. Memari, S. Bouisset and S. Le Bozec

Comparison of models of dynamic balance in biological motions pp. 183-184

L. Hoyet and F. Multon

Impact of mitral valve type on pulmonary hypertension and left atrial flow patterns: an preliminary study pp. 185-186

M. Evin, D. Tanne, P. Pibarot and R. Rieu

Interest of isokinetic force–velocity relationships during low back pain evaluation pp. 187-189

M. Ripamonti, M. Ritz, D. Colin and A. Rahmani

Dynamics of sit-to-stand motions: effect of seat height, handle use and asymmetrical motions pp. 191-192

T. Robert, J. Causse and X. Wang

kinematics of the shoulder: comparison with data during arm flexion pp. 193-194

S. Duprey, D. Subit, D. Lessley, H. Guillemot and R. Kent

Non-invasive assessment of human ribs mechanical properties pp. 195-196

D. Tran, K. Bruyere-Garnier, A. Didier, J. Minonzio, J. Foiret, N. Vilayphiou, M. Talmant, P. Laugier and D. Mitton

Posture and lumbago: does a stabilometric platform help in identifying pain? pp. 197-198

Y. Huard and W. Bertucci

Peak forces of the rotator cuff muscles during activity of daily livings performed by a wheelchair user pp. 199-201

L. Fradet, F. Marin, J. Rasmussen and S. Wolf

On the rotary remodelling equilibrium of bone pp. 203-204

V. Sansalone, S. Naili and A. Di Carlo

Mechanical response and failure processes of anterior cruciate ligament from static to dynamic loading rates pp. 205-207

S. Pattofatto, V. Fortineau, S. Guerard and S. Laporte

Computational assessment of the coefficient of friction on cementless hip replacement stability pp. 209-210

H. Ozturk, P. Nair and M. Browne

Reliability and reproducibility of two different inertial dynamometers for determining muscular profile pp. 211-213

G. Ravier

Three-dimensional kinematic and dynamic analysis of the crawl tumble turn performance: the expertise effect pp. 215-216

F. Puel, J. Morlier, M. Mesnard, M. Cid and P. Hellard

Semi-automated algorithm for cortical and trabecular bone separation from CT scans pp. 217-218

K. Janc, J. Tarasiuk, A. Bonnet and P. Lipinski

The Peronnet–Thibault mathematical model applied to the record power profile in cycling pp. 219-220

J. Pinot and F. Grappe

A new 3D geometrical modelling of adolescent idiopathic scoliosis pp. 221-222

J. Gesbert, B. Colobert, Ph. Violas, J. Dufournet, D. Vervaeke and L. Rakotomanana

Mechanical and physicochemical multiscale analysis of cortical bone pp. 223-225

L. Cueru, A. Trunfio sfarghiu, Y. Bala, B. Depalle, Y. Berthier and H. Follet

Propulsive efficiency of a multilayer anisotropic fin in fluid–structure interaction pp. 227-229

B. Mahiou, F. Razafimahery and S. Rakotomanana

A tibia model database from CT scan pp. 231-232

S. Quijano, L. Jiabin, A. Serrurier, E. Jolivet and W. Skalli

Influence of body segment masses on articular efforts computation for lateral transfer movement of a paraplegic individual pp. 233-234

J.-F. Debril, P. Pudlo, E. Simoneau, D. Pradon, Y. Dessery, P. Gorce and F. Lepoutre

Viscoelastic assessment of skin quality for clinical applications pp. 235-236

S. Darwiche, N. Ait Bouziad, W. Raffoul, L. Applegate and D. Pioletti

The convex wrapping algorithm pp. 237-239

E. Desailly, P. Sardain, N. Khouri, D. Yepremian and P. Lacouture

Parametric study of a spherical head model in fluid‐structure interaction pp. 241-242

A. El Baroudi, F. Razafimahery and L. Rakotomanana

Interest of video analysis for the lower back pain patient: a premilinary study pp. 243-245

A. Lemaire, M. Ripamonti, Y. Delpierre, M. Ritz and A. Rahmani

Identification of geometrical parameters of femoral heads for hip joint mechanical model pp. 247-248

M. Villars, E. Fournier, F. Richard and S. Thibaud

Identification of material parameters of cartilage for hip joint mechanical model pp. 249-251

M. Villars, E. Fournier and F. Richard

Fabrication and characterisation of an artificial vascularised human skin pp. 253-254

A. Passot and G. Cabodevila

GAO parameter identification method in biomechanics pp. 255-256

N. Harb, N. Labed, M. Domaszewski and F. Peyraut

First application of an axial speed of sound measurement technique in the monitoring of tendon healing pp. 257-259

C. Vergari, P. Pourcelot, B. Ravary-Plumioën, A. Dupays, S. Jacquet, J. Denoix, D. Mitton, P. Laugier and N. Crevier-Denoix

Nanoscale mechanical analysis of dental filling composite and its finite element modelling pp. 261-262

R. Eichlerová, J. Lukeš and J. Šepitka

Does mechanical loading influence development of osteoarthritis in hip joint? pp. 263-264

Z. Horak, P. Kubovy and J. Horakova

Dynamic nanoindentation of porcine spinal zygapophyseal joint cartilage pp. 265-266

J. Šepitka, M. Otáhal and J. Lukeš

Computation of forces acting in temporomandibular joint and masticatory muscles during mastication pp. 267-268

M. Vilimek and T. Goldmann

Compression sleeves limit the stride alteration at maximal aerobic velocity pp. 269-270

A. Menetrier and N. Tordi

Hepatic cell encapsulation for applications in tissue engineering pp. 271-272

Nghi Tran, S. Capone, M. Dufresne, P. Paullier and C. Legallais

A finite element model of the rat brain for injury investigation pp. 273-274

D. Baumgartner, M. Lamy, R. Willinger and J. Davidsson

Effects of implant positioning in cementless total hip replacements pp. 275-276

M. Bah, M. Browne, P. Young, R. Bryan and V. Bui Xuan

Image-based modelling and simulation of human anatomy pp. 277-278

P. Young, D. Raymont and V. Bui Xuan

Numerical simulation of thermoablation in living tissues pp. 279-280

M. Racila and J. Crolet

Development of an innovative animal model of bone repair on deer antlers pp. 281-282

L. Obert and F. Gindraux

Biological membranes for bone repair pp. 283-284

P. Garbuio, L. Obert, G. Pebre, J. Pauchot, B. Flamans, H. Petite, Y. Tropet, F. Pouthier, C. Malugani and F. Gindraux

Calculation of intracranial pressure in human brain using Darcy's and Biot's models pp. 285-287

J.-M. Drezet and K. Shahim

Volume 14, issue 12, 2011

Finite element modelling of equestrian helmet impacts exposes the need to address rotational kinematics in future helmet designs pp. 1021-1031

M. Forero Rueda, L. Cui and M. Gilchrist

A new single-end mainstream CO capnograph pp. 1033-1039

Jiachen Yang, Bin Wang, Chaowei Fan and Lei Wang

Proposal of a thorax segment coordinate system for the 3D kinematical analysis of the cervical spine pp. 1041-1047

L. Boussion, P. Bahuaud and L. Cheze

A modified human head model for the study of impact head injury pp. 1049-1057

Wenyi Yan and Oscar Pangestu

Algorithm and validation of a computer method for quantifying attachment locus of glenohumeral ligament pp. 1059-1063

Hippolite Amadi and Anthony Bull

Validation of the Boussinesq equation for use in traction field determination pp. 1065-1070

Zhaochun Yang

Computation models simulating notochordal cell extinction during early ageing of an intervertebral disc pp. 1071-1077

K. Louman-Gardiner, D. Coombe and C. Hunter

Modelling skeletal muscle fibre orientation arrangement pp. 1079-1088

Y. Lu, H. Zhu, S. Richmond and J. Middleton

Image assessment of MSCT and CBCT scans for rapid maxillary expansion: a pilot study pp. 1089-1095

Pollyana Moura, Gilson Giraldi, Pedro Lira, Diego Leite, Paulo Rodrigues, Marcelo Faria and Bianca Gutfilen

Quantitative measurement of speech sound distortions with the aid of minimum variance spectral estimation method for dentistry use pp. 1097-1104

L. Bereteu, G. Drăgănescu, D. Stănescu and C. Sinescu

Estimation of independent and dependent components of non-invasive EMG using fast ICA: validation in recognising complex gestures pp. 1105-1111

Ganesh Naik and Dinesh Kumar

The influence of implant number and abutment design on the biomechanical behaviour of bone for an implant-supported fixed prosthesis: a finite element study in the upper anterior region pp. 1113-1116

I. Hasan, C. Bourauel, L. Keilig, S. Reimann and F. Heinemann

Modelling active transport in Drosophila unipolar motor neurons pp. 1117-1131

A. Kuznetsov

Volume 14, issue 11, 2011

Computational haemodynamics in two idealised cerebral wide-necked aneurysms after stent placement pp. 927-937

Shengzhang Wang, Guanghong Ding, Yisen Zhang and Xinjian Yang

Estimating joint kinematics from skin motion observation: modelling and validation pp. 939-946

Alon Wolf and Merav Senesh

Biomechanical differences of Coflex-F and pedicle screw fixation combined with TLIF or ALIF – a finite element study pp. 947-956

Cheng-Chan Lo, Kai-Jow Tsai, Zheng-Cheng Zhong, Shih-Hao Chen and Chinghua Hung

A computational method for developing hierarchical large deformation viscoelastic models of the contracting heart pp. 957-968

Sima Witman, Ofer Barnea and Amit Gefen

Biomechanical effect after Coflex and Coflex rivet implantation for segmental instability at surgical and adjacent segments: a finite element analysis pp. 969-978

Cheng-Chan Lo, Kai-Jow Tsai, Shih-Hao Chen, Zheng-Cheng Zhong and Chinghua Hung

Finite element investigation of implant-supported fixed partial prosthesis in the premaxilla in immediately loaded and osseointegrated states pp. 979-985

I. Hasan, F. Heinemann, S. Reimann, L. Keilig and C. Bourauel

Numerical and series solutions of the peristaltic motion of an Oldroyd 8-constant fluid in an endoscope pp. 987-993

S. Nadeem, Noreen Akbar, T. Hayat and Awatif Hendi

Physiological control of an in-series connected pulsatile VAD: numerical simulation study pp. 995-1007

Yubing Shi, Yuhui Shi and Theodosios Korakianitis

Effects of sitting postures on risks for deep tissue injury in the residuum of a transtibial prosthetic-user: a biomechanical case study pp. 1009-1019

S. Portnoy, I. Siev-Ner, N. Shabshin and A. Gefen

Volume 14, issue 10, 2011

HEMETβ: improvement of hepatocyte metabolism mathematical model pp. 837-851

G. Orsi, C. De Maria, M. Guzzardi, F. Vozzi and G. Vozzi

Viscous flow through slowly expanding or contracting porous walls with low seepage Reynolds number: a model for transport of biological fluids through vessels pp. 853-862

Saeed Dinarvand

A computational method for reliable gait event detection and abnormality detection for feedback in rehabilitation pp. 863-874

Chathuri Senanayake and S. Senanayake

Finite element analysis of aortic root dilation: a new procedure to reproduce pathology based on experimental data pp. 875-882

F. Auricchio, M. Conti, S. Demertzis and S. Morganti

Wear analysis in anatomical and reversed shoulder prostheses pp. 883-892

N. Ribeiro, J. Folgado, P. Fernandes and J. Monteiro

Gaussian curvature analysis allows for automatic block placement in multi-block hexahedral meshing pp. 893-904

Austin Ramme, Kiran Shivanna, Vincent Magnotta and Nicole Grosland

Towards automatic quantification of the epicardial fat in non-contrasted CT images pp. 905-914

Jorge Barbosa, Bruno Figueiredo, Nuno Bettencourt and João Tavares

Respiratory deposition model of an inhaled aerosol bolus pp. 915-925

Chien-Wen Huang, Chun Pei and Chien-Hua Huang

Volume 14, issue 09, 2011

Sensitivity analysis of periprosthetic healing to cell migration, growth factor and post-operative gap using a mechanobiological model pp. 763-771

Pascal Swider, D. Ambard, G. Guérin, Kjeld Søballe and Joan Bechtold

Segmentation of foot and ankle complex based on kinematic criteria pp. 773-781

Hossein Rouhani, Julien Favre, Xavier Crevoisier, Brigitte Jolles and Kamiar Aminian

Isomap transform for segmenting human body shapes pp. 783-795

P. Cerveri, K. Sarro, M. Marchente and R. Barros

Patient-specific computational haemodynamics: generation of structured and conformal hexahedral meshes from triangulated surfaces of vascular bifurcations pp. 797-802

G. De Santis, M. De Beule, P. Segers, P. Verdonck and B. Verhegghe

A finite element model of stress-mediated vascular adaptation: application to abdominal aortic aneurysms pp. 803-817

Shahrokh Zeinali-Davarani, Azadeh Sheidaei and Seungik Baek

Can the size of the epiphysis determine the number of secondary ossification centers? A mathematical approach pp. 819-826

Diego Garzón-Alvarado

Numerical simulation of microneedles' insertion into skin pp. 827-835

X. Kong, P. Zhou and C. Wu

Volume 14, issue 08, 2011

Influence of the method of TM joint total replacement implantation on the loading of the joint on the opposite side pp. 673-681

R. Jirman, Z. Horak, T. Bouda, J. Mazanek and J. Reznicek

Pulsatile non-Newtonian haemodynamics in a 3D bifurcating abdominal aortic aneurysm model pp. 683-694

J. Ma and A. Turan

Parametric convergence sensitivity and validation of a finite element model of the human lumbar spine pp. 695-705

Ugur Ayturk and Christian Puttlitz

A novel video-based method using projected light to measure trunk volumes during respiration pp. 707-713

Angélica Lodovico, Pietro Cerveri, Giancarlo Ferrigno and Ricardo Barros

Reproducibility of geometrical acquisition of intra-thoracic organs of children on CT scans pp. 715-720

François Coulongeat, Mohamed-Salah Jarrar, Thierry Serre and Lionel Thollon

The influence of data shape acquisition process and geometric accuracy of the mandible for numerical simulation pp. 721-728

C. Relvas, A. Ramos, A. Completo and J. Simões

The effect of degenerative morphological changes of the intervertebral disc on the lumbar spine biomechanics: a poroelastic finite element investigation pp. 729-739

Fabio Galbusera, Hendrik Schmidt, Cornelia Neidlinger-Wilke and Hans-Joachim Wilke

Numerical simulation of cross-country skiing pp. 741-746

Peter Carlsson, Mats Tinnsten and Mats Ainegren

Image-based midsole insert design and the material effects on heel plantar pressure distribution during simulated walking loads pp. 747-753

Y. Gu, J. Li, M. Lake, Y. Zeng, X. Ren and Z. Li

Effect of axis alignment on shoulder kinematics pp. 755-761

N. Hagemeister, M. Senk, R. Dumas and L. Chèze

Volume 14, issue 07, 2011

Accuracy of computer-aided geometric 3D reconstruction based on histological serial microgrinding preparation pp. 581-594

Thomas Rau, Andreas Hussong, Anna Herzog, Omid Majdani, Thomas Lenarz and Martin Leinung

Thermal and hydrodynamic modelling of active catheters for interventional radiology pp. 595-602

Emilie Marchandise, Patrice Flaud, Laurent Royon, Raphaël Blanc and Jérome Szewczyk

Segmentation of left ventricle in short-axis echocardiographic sequences by weighted radial edge filtering and adaptive recovery of dropout regions pp. 603-613

Prashant Bansod, U. Desai, S. Merchant and Nitin Burkule

A technical method using musculoskeletal model to analyse dynamic properties of muscles during human movement pp. 615-620

Gang Tang, Xi-an Zhang, Lin-lin Zhang, Hong-sheng Wang, Wen-zhong Nie and Cheng-tao Wang

Collagen's role in the cortical bone's behaviour: a numerical approach pp. 621-631

M. Predoi-Racila and J. Crolet

Numerical modelling of nanoparticle deposition in the nasal cavity and the tracheobronchial airway pp. 633-643

Kiao Inthavong, Kai Zhang and Jiyuan Tu

The effect of resistance level and stability demands on recruitment patterns and internal loading of spine in dynamic flexion and extension using a simple trunk model pp. 645-656

Shahrokh Zeinali-Davarani, Aboulfazl Shirazi-Adl, Behzad Dariush, Hooshang Hemami and Mohamad Parnianpour

A depth-dependent model of the pericellular microenvironment of chondrocytes in articular cartilage pp. 657-664

Sang-Kuy Han, Salvatore Federico and Walter Herzog

New head models extracted from thermal infrared (IR) images for dosimetry computations pp. 665-671

Akram Gasmelseed

Volume 14, issue 06, 2011

Can the theory of critical distances predict the failure of shape memory alloys? pp. 491-496

Saeid Kasiri, Daniel Kelly and David Taylor

InfarctSizer: computing infarct volume from brain images of a stroke animal model pp. 497-504

Jaetak Lee, Ja-Kyeong Lee and Kyungsook Han

Finite element studies of the mechanical behaviour of the diaphragm in normal and pathological cases pp. 505-513

M. Pato, N. Santos, P. Areias, E. Pires, M. de Carvalho, S. Pinto and D. Lopes

Simulation of endovascular guidewire behaviour and experimental validation pp. 515-520

Vincent Luboz, Jianhua Zhai, Tolu Odetoyinbo, Peter Littler, Derek Gould, Thien How and Fernando Bello

Analysis and classification of compressed EMG signals by wavelet transform via alternative neural networks algorithms pp. 521-525

M. Ozsert, O. Yavuz and L. Durak-Ata

A multibody modelling approach to determine load sharing between passive elements of the lumbar spine pp. 527-537

Alireza Abouhossein, Bernhard Weisse and Stephen Ferguson

Time-dependent elastohydrodynamic lubrication analysis of total knee replacement under walking conditions pp. 539-548

Yonglin Su, Peiran Yang, Zengliang Fu, Zhongmin Jin and Chengtao Wang

Modelling and simulation of the behaviour of a biofluid in a microchannel biochip separator pp. 549-560

Xiangdong Xue, Mayur Patel, Maïwenn Kersaudy-Kerhoas, Chris Bailey and Marc Desmulliez

A kinematic method for computing the motion of the body centre-of-mass (CoM) during walking: a Bayesian approach pp. 561-572

Fabio Martínez, Francisco Gómez and Eduardo Romero

A full body musculoskeletal model based on flexible multibody simulation approach utilised in bone strain analysis during human locomotion pp. 573-579

R. Al Nazer, A. Klodowski, T. Rantalainen, A. Heinonen, H. Sievänen and A. Mikkola

Volume 14, issue 05, 2011

Preface pp. 401-401

Cees Oomens and Frank Baaijens

Continuum-level modelling of cellular adhesion and matrix production in aggregates pp. 403-410

Liesbet Geris, Joanna M.A. Ashbourn and Tim Clarke

Cellular-scale transport in deformed skeletal muscle following spinal cord injury pp. 411-424

Yael Ruschkewitz and Amit Gefen

A reaction–diffusion model to predict the influence of neo-matrix on the subsequent development of tissue-engineered cartilage pp. 425-432

C.C. van Donkelaar, G. Chao, D.L. Bader and C.W.J. Oomens

An Eulerian/XFEM formulation for the large deformation of cortical cell membrane pp. 433-445

Franck J. Vernerey and Mehdi Farsad

Modelling and simulation of substrate elasticity sensing in stem cells pp. 447-458

Xiaowei Zeng and Shaofan Li

Simulations of the contractile cycle in cell migration using a bio-chemical–mechanical model pp. 459-468

Sangyoon J. Han and Nathan J. Sniadecki

Mechanics and electrostatics of the interactions between osteoblasts and titanium surface pp. 469-482

D. Kabaso, E. Gongadze, Š. Perutková, C. Matschegewski, V. Kralj-Iglič, U. Beck, U. van Rienen and A. Iglič

Coiled-coil intermediate filament stutter instability and molecular unfolding pp. 483-489

Melis Arslan, Zhao Qin and Markus J. Buehler

Volume 14, issue 04, 2011

Fluid-induced osteolysis: modelling and experiments pp. 305-318

Lars Johansson, Ulf Edlund, Anna Fahlgren and Per Aspenberg

An approach to automatic blood vessel image registration of microcirculation for blood flow analysis on nude mice pp. 319-330

Wen-Chen Lin, Chih-Chieh Wu, Geoffrey Zhang, Tung-Hsin Wu, Yang-Hsien Lin, Tzung-Chi Huang, Ren-Shyan Liu and Kang-Ping Lin

Computational structural modelling of coronary stent deployment: a review pp. 331-348

David Martin and Fergal J. Boyle

A semi-automated approach towards generating three-dimensional mesh of the heart using a hybrid MRI/histology database pp. 349-358

E.K. Theofilogiannakos, G.K. Theofilogiannakos, P.G. Danias, T.V. Yioultsis, A. Anogeianaki, V. Stergiou-Michailidou, K. Kallaras, T. Xenos and G. Anogianakis

Fit optimisation of a distal medial tibia plate pp. 359-364

Beat Schmutz, Martin E. Wullschleger, Hansrudi Noser, Mark Barry, John Meek and Michael A. Schütz

An approach on determining the displacements of the pelvic floor during voluntary contraction using numerical simulation and MRI pp. 365-370

C.S. Saleme, M.P.L. Parente, R.M. Natal Jorge, M. Pinotti, A.L. Silva-Filho, T. Roza, T. Mascarenhas and João Manuel R.S. Tavares

An integrated genetics approach for identifying protein signal pathways of Alzheimer's disease pp. 371-378

Yue Huang, Xuezhi Sun and Guangshu Hu

Numerical simulation of the flow field and mass transport pattern within the coronary artery pp. 379-388

Nenad Filipovic, Danko Milasinovic, Nikola Jagic, Vladimir Miloradovic, Holger Hetterich and Johannes Rieber

Assessment of the influence of foot orthoses in the hip loading conditions during walking: a single case study pp. 389-398

A. Pustoc'h, A. Bonnefoy, F. Labesse-Jied, A. Lavigne and L. Cheze

In Memoriam Professor Rik Huiskes (1944–2010) pp. 399-399

John Middleton and Chris Jacobs

Volume 14, issue 03, 2011

Novel optical system for quantification of full surface strain fields in small arteries: I. Theory and design pp. 213-225

K. Genovese, Y.U. Lee and J.D. Humphrey

Novel optical system for quantification of full surface strain fields in small arteries: II. Correction for refraction and illustrative results pp. 227-237

K. Genovese, Y.U. Lee and J.D. Humphrey

Method of modelling intracellular transport in branching neurites: application to axons and dendrites of sensory neurons pp. 239-251

A.V. Kuznetsov

Mechanobiological prediction of proximal femoral deformities in children with cerebral palsy pp. 253-262

Alessandra Carriero, Ilse Jonkers and Sandra J. Shefelbine

A computational/experimental platform for investigating three-dimensional puzzle solving of comminuted articular fractures pp. 263-270

Thaddeus P. Thomas, Donald D. Anderson, Andrew R. Willis, Pengcheng Liu, Matthew C. Frank, J. Lawrence Marsh and Thomas D. Brown

Analysis of activity in fMRI data using affinity propagation clustering pp. 271-281

Jiang Zhang, Dahuan Li, Huafu Chen and Fang Fang

Algorithms for ultrasound elastography: a survey pp. 283-292

Mauro M. Sette, Pauwel Goethals, Jan D'hooge, Hendrik Van Brussel and Jos Vander Sloten

Remedy for fictive negative pressures in biphasic finite element models of the intervertebral disc during unloading pp. 293-303

Hendrik Schmidt, Fabio Galbusera, Hans-Joachim Wilke and Aboulfazl Shirazi-Adl

Volume 14, issue 02, 2011

CMBBE special issue on novel computational methods in orthopaedic biomechanics pp. 133-133

Michael A.K. Liebschner

Mechanical stimulation to stimulate formation of a physiological collagen architecture in tissue-engineered cartilage: a numerical study pp. 135-144

Mehdi Khoshgoftar, Corrinus C. van Donkelaar and Keita Ito

Mixed-mode loading of the cement–bone interface: a finite element study pp. 145-155

Daan Waanders, Dennis Janssen, Katia Bertoldi, Kenneth A. Mann and Nico Verdonschot

Experimental and probabilistic analysis of distal femoral periprosthetic fracture: a comparison of locking plate and intramedullary nail fixation. Part A: experimental investigation pp. 157-164

Christina Salas, Deana Mercer, Thomas A. DeCoster and Mahmoud M. Reda Taha

Towards validation of computational analyses of peri-implant displacements by means of experimentally obtained displacement maps pp. 165-174

S.E. Basler, T.L. Mueller, D. Christen, A.J. Wirth, R. Müller and G.H. van Lenthe

Experimental and probabilistic analysis of distal femoral periprosthetic fracture: a comparison of locking plate and intramedullary nail fixation. Part B: probabilistic investigation pp. 175-182

Christina Salas, Deana Mercer, Thomas A. DeCoster and Mahmoud M. Reda Taha

Implementation of asymmetric yielding in case-specific finite element models improves the prediction of femoral fractures pp. 183-193

Loes C. Derikx, Roeland Vis, Timo Meinders, Nico Verdonschot and Esther Tanck

Effect of endplate calcification and mechanical deformation on the distribution of glucose in intervertebral disc: a 3D finite element study pp. 195-204

Alicia R. Jackson, Chun-Yuh Huang and Wei Yong Gu

Development of a finite element model of the tibia for short-duration high-force axial impact loading pp. 205-212

Cheryl E. Quenneville and Cynthia E. Dunning

Volume 14, issue 01, 2011

A new intelligent approach for estimation of blood potassium concentration pp. 1-7

Mashhour Bani Amer

Tetrahedral vs. polyhedral mesh size evaluation on flow velocity and wall shear stress for cerebral hemodynamic simulation pp. 9-22

Martin Spiegel, Thomas Redel, Y. Jonathan Zhang, Tobias Struffert, Joachim Hornegger, Robert G. Grossman, Arnd Doerfler and Christof Karmonik

A mathematical model of epiphyseal development: hypothesis of growth pattern of the secondary ossification centre pp. 23-32

Diego Alexander Garzón-Alvarado, Liliana Mabel Peinado Cortés and Rosy Paola Cárdenas Sandoval

Material parameter identification of arterial wall layers from homogenised stress–strain data pp. 33-41

Pavel Skacel and Jiri Bursa

Optimal length of smooth muscle assessed by a microstructurally and statistically based constitutive model pp. 43-52

M. Kroon

Measuring handball players trajectories using an automatically trained boosting algorithm pp. 53-63

Ricardo M.L. Barros, Rafael P. Menezes, Tiago G. Russomanno, Milton S. Misuta, Bruno C. Brandão, Pascual J. Figueroa, Neucimar J. Leite and Siome K. Goldenstein

Determining the location of hip joint centre: application of a conchoid's shape to the acetabular cartilage surface of magnetic resonance images pp. 65-71

M.J. Kang, H. Sadri, R. Stern, N. Magnenat-Thalmann, P. Hoffmeyer and H.S. Ji

Accuracy of a transformation method to estimate muscle attachments based on three bony landmarks pp. 73-78

Ricardo Matias, Carlos Andrade and António Prieto Veloso

A numerical model of the fracture healing process that describes tissue development and revascularisation pp. 79-93

U. Simon, P. Augat, M. Utz and L. Claes

Intraventricular vortex flow changes in the infarcted left ventricle: numerical results in an idealised 3D shape pp. 95-101

Federico Domenichini and Gianni Pedrizzetti

The biomechanical effect of the collar of a femoral stem on total hip arthroplasty pp. 103-112

Insu Jeon, Ji-Yong Bae, Jin-Hong Park, Taek-Rim Yoon, Mitsugu Todo, Masaaki Mawatari and Takao Hotokebuchi

CFD simulation of flow through heart: a perspective review pp. 113-132

S.S. Khalafvand, E.Y.K. Ng and L. Zhong