Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 23, issue S1, 2020

Assessing gait variability from cellphone IMU placed in several locations: a feasibility study pp. S1-S3

N. Al Abiad, V. Renaudin and T. Robert

The use of a descriptor of instability to characterize and compare transfemoral amputees’ gait with healthy subjects pp. S4-S6

N. Al Abiad, H. Pillet and B. Watier

Towards an estimation of 3D efforts in lower limb prosthesis socket using low-cost, gauge-based acquisition system pp. S7-S9

A. Altamirano, D. Jacquot, D. Mangenot, C. Villa, E. Vacherand, C. Sauret and J. Bascou

Bone drilling: an identification of heat sources pp. S10-S11

F. Amewoui, G. Le Coz, A. S. Bonnet and A. Moufki

Does aging cause joint mechanics redistribution during squat jumping? pp. S12-S14

S. Argaud, B. Pairot de Fontenay, Y. Blache and K. Monteil

Kinetic model of the evolution of hypertrophic chondrocytes in articular cartilage pp. S15-S17

K. Atoessi, E. Sapin-de Brosses and J. F. Ganghoffer

Characterization of bone fragment displacement during minimally invasive surgical procedures by digital volume correlation (DVC) pp. S18-S19

Kévin Aubert, Tanguy Vendeuvre, Nicolas Michel, Michel Rochette, Cyril Brèque, Philippe Rigoard, Valéry Valle and Arnaud Germaneau

Patient-specific finite element model to evaluate the influence of the type of stabilization on the patient's continuation of life after tibial plateau fractures pp. S20-S22

Kévin Aubert, Arnaud Germaneau, Wenfeng Ye, Michel Rochette, Philippe Rigoard and Tanguy Vendeuvre

Reduced order modeling of an active multi-curve guidewire for endovascular surgery pp. S23-S24

A. Badrou, A. Bel-Brunon, N. Hamila, N. Tardif and A. Gravouil

Definition of an optimal model based on segments’ contribution for the estimation of the acceleration of the center of mass in people with lower-limb amputation pp. S25-S27

J. Basel, E. Simonetti, E. Bergamini, J. Bascou, G. Vannozzi and H. Pillet

Shock response spectrum analysis in running performance pp. S28-S30

D. Benjamin, S. Odof, B. Abbes, J.B. Nolot, D. Erre, F. Fourchet and R. Taiar

Impact of machining process on the flexural strength of CAD/CAM blocks for dental restorations pp. S31-S32

Aurélie Benoit, Hiba Issaoui and Nicolas Lebon

Modelling regenerative angiogenesis in peripheral nerve injuries pp. S33-S34

M. Berg, R. Coy, J. Phillips and R. Shipley

Does double calibration coupled with a closed loop multibody kinematic optimization improve scapular kinematic estimates? pp. S35-S37

Y. Blache, M. Degot, M. Begon, S. Duprey and I. Rogowski

Cancellous bone and PMMA cement interfacial fracture properties evaluation using heaviside digital image correlation/wedge splitting test method pp. S38-S39

Prasanth Bokam, Arnaud Germaneau, Philippe Rigoard, Tanguy Vendeuvre and Valery Valle

Identification of fractures in cancellous bone using µFE models and Heaviside-Digital volume correlation pp. S40-S42

Prasanth Bokam, Laetitia Caille, Arnaud Germaneau, Philippe Rigoard, Tanguy Vendeuvre and Valery Valle

Variability of motor moment during golf swing: study of a female professional player pp. S43-S44

M. Bourgain, T. Provot, C. Sauret, L. Valdes-Tamayo, O. Rouillon, P. Thoreux and P. Rouch

Influence of the projection plane and the markers choice on the X-factor computation of the golf swing X-factor: a case study pp. S45-S46

M. Bourgain, C. Sauret, T. Marsan, M. J. Perez, O. Rouillon, P. Thoreux and P. Rouch

Effects of ageing on glass-polymer dental composites pp. S47-S48

Y. Boussès, N. Brulat-Bouchard and Y. Tillier

Ex-vivo mechanical characterisation of the breast Cooper’s ligaments pp. S49-S51

N. Briot, G. Chagnon, C. Masri, E. Girard and Y. Payan

Biomechanical analysis of an original repair of an achilles tendon rupture in dogs: preliminary results pp. S52-S54

P. Buttin, B. Goin, N. Giraud, E. Viguier and T. Cachon

Real-time simulations of human tongue movements with a reduced order model of a non-linear dynamic biomechanical model pp. S55-S57

M. Calka, P. Perrier, J. Ohayon, C. Grivot Boichon, M. Rochette and Y. Payan

Stringing and dynamics effects on forearm muscular activity during harp playing pp. S58-S60

D. Chadefaux, C. Pothrat and J.-L Le Carrou

A preliminary study of stability in elite and novice 10 meter air pistol shooters pp. S61-S62

D. Chadefaux, L. Valdes-Tamayo, R. Moreno Flores, Y. Poulet, G. Herrera Altamira, S. Hybois, M. Coursimault, C. Sauret, V. Attali and P. Thoreux

Evaluation of the milling’s response of a new bi-material 3D-printed model of temporal bone used for surgeons’ training pp. S63-S65

J. Chauvelot, G. Le Coz, C. Laurent, A. S. Bonnet, A. Moufki and C. Parietti-Winkler

Acute effect of thigh compression garment on muscle oscillations during running: impact of speed and slope pp. S66-S68

P.E. Dandrieux, A. Thouze and J. Rossi

Ground reaction force during the Upper Quarter Y-Balance Test pp. S69-S70

M. Degot, I. Rogowski and Y. Blache

Joint motion restrictions and exaggerate muscular activities during fingertip-to-floor test in case of patients with chronic low back pains? A pilot study pp. S71-S72

Y. Delpierre, G. Audat and C. Garnier

Dynamic imbalance in sagittal plane to evaluate patients with idiopathic scoliosis before and after spinal fusion. A pilot study pp. S73-S75

Y. Delpierre and P. Vernet

The biomechanical Nature of nucleus Pulposus in a fissured disc revealed by quantitative MRI performed under dynamic conditions pp. S76-S78

J. P. Deneuville, M. Yushchenko, T. Vendeuvre, A. Germaneau, M. Billot, M. Roulaud, M. Sarracanie, N. Salameh and P. Rigoard

In vitro comparison on a gap fracture model of a novel angle-stable interlocking nail to locking plate fixation in torsion, compression and bending pp. S79-S81

J. Deprey, M. Blondel, A. Baldinger, O. Gauthier, J. Hée, P. Moissonnier, E. Viguier, C. Carozzo and T. Cachon

Topology optimization for the control of load transfer at the bone-implant interface: a preliminary numerical study pp. S82-S84

P. Didier, B. Piotrowski, G. Le Coz and P. Laheurte

Clinical and numerical study of a statically determinate lingual mechanism for orthodontic tooth displacement pp. S85-S87

G. Dot, R. Licha, F. Goussard and V. Sansalone

Mechanical behaviour of a membrane made of human umbilical cord for dental bone regenerative medicine pp. S88-S90

M. Dubus, H. Kerdjoudj, L. Scomazzon, J. Sergheraert, C. Mauprivez, R. Rahouadj and A. Baldit

Fluoroscopy-based subject-specific knee joint constraints for the estimation of prosthesis kinematics and contact velocities during gait pp. S91-S93

R. Dumas, F. Moissenet and L. Cheze

Passive prosthesis control strategy for downhill ambulation pp. S94-S96

C. Duraffourg, X. Bonnet, F. Djian and H. Pillet

Identification of gait stability indices for the rehabilitation follow-up of people with transtibial amputation: a preliminary study pp. S97-S98

J. Durand, Andrea Prat, T. Provot, J. Bascou and E. Simonetti

Biomechanical characterization of earlobe keloid by ring suction test pp. S99-S100

A. Elouneg, Q. Lucot, E. Veyrat-Durebex, A. Lejeune, J. Chambert, T. Lihoreau, B. Chatelain, G. Rolin and E. Jacquet

Contribution of hip extension and lumbar lordosis during back walkover performed by rhythmic and woman artistic gymnasts: a preliminary study pp. S101-S103

C. Eyssartier, Y. Poulet, T. Marsan, L. Valdes-Tamayo, S. El Oujaji, M. Robert, P. Billard, P. Thoreux and C. Sauret

Biomechanical analysis of corneal keratoconic disease pp. S104-S106

N. Falgayrettes, E. Patoor, F. Cleymand and J-M. Perone

Prediction of muscle forces in residual limb during walking: comparison of transfemoral and Gritti–Stokes amputations pp. S107-S109

N. Fougeron, X. Bonnet, B. Panhelleux, J.-L. Rose, P.-Y. Rohan and H. Pillet

Design optimization of a functionally graded overlay using FEA pp. S110-S112

V. Fouquet, L. Tapie, J. P. Attal and A. Benoit

Influence of the corpus callosum anatomy on its mechanical behavior during a lateral impact. A finite element study pp. S113-S114

P.-M. François, B. Sandoz, P. Decq and S. Laporte

Influence of human cancer cell lines on mechanical properties of mice tibia pp. S115-S116

M. Gardegaront, G. Plet, B. Delpuech, L. Bouazza, M. Brevet, J.-B. Pialat, P. Clézardin, C. B. Confavreux, D. Mitton and H. Follet

Effort self-assessment - resultant external force - muscular activities. Which physical exertion assessment method? Case of clip fitting in a female population pp. S117-S118

C. Gaudez, L. Claudon and P. Wild

Personalized pulmonary poromechanics pp. S119-S120

M. Genet, C. Patte, C. Fetita, P.-Y. Brillet and D. Chapelle

How mechanobiological modelling of cellular activities can predict bone density evolution? pp. S121-S122

D. George, R. Allena, C. Bourzac, S. Pallu, H. Portier and Y. Rémond

Computational modeling of the role of smooth muscle cells contractility on the progression of aortic aneurysms pp. S123-S124

A. Ghavamian, S. J. Mousavi and S. Avril

Mechanical properties of 3D tumor spheroids measured by AFM pp. S125-S127

A. Giannetti, J. Revilloud and C. Verdier

Biomechanical comparison of two suturing techniques during Achilles tendinoplasty in dogs: preliminary results pp. S128-S129

B. Goin, P. Buttin, T. Cachon and E. Viguier

Rapid modeling: a surgical proof-of-concept explained by hemodynamics modeling pp. S130-S132

N. Golse, F. Joly, Q. Nicolas, E. Vibert, P. D. Lin and I. Vignon-Clementel

In vitro study of proximal cancellous bone loss effect in the dental implant stability pp. S133-S135

Cátia Gomes, M. Mesnard and A. Ramos

Prediction of plausible locomotion using nonlinear kinematic optimization pp. S136-S138

N. Hareng, B. Watier and F. Multon

Biomechanical fidelity assessment of a pick and place task with haptic feedback in virtual reality pp. S139-S141

Simon Hilt, Charles Pontonnier and Georges Dumont

Quantification of abdominal and back muscles forces: calibration for the Sorensen test pp. S142-S144

S. Hinnekens, P. Mahaudens, C. Detrembleur and P. Fisette

A phenomenological and multiscale modeling of arterial growth and remodeling under endofibrosis pp. S145-S147

J. Jansen, X. Escriva, F. S. Godeferd and P. Feugier

Numerical optimization method for estimating the individual musculo-tendon forces for ergonomic assessment pp. S148-S150

Olfa Jemaa, Sami Bennour, David Daney and Lotfi Romdhane

Retinal micro-vascular network: data and model pp. S151-S152

L. Julien, J. Ventre, P.-Y Lagrée, A. Ramkhelawon, F. Rossant, M. Atlan, M. Paques and J.-M. Fullana

Residual type B aortic dissection FSI modeling pp. S153-S155

F. Khannous, C. Guivier-Curien, M. Gaudry, P. Piquet and V. Deplano

Analysis of the biomechanical parameters of the lineout throwing performance under distance variable conditions in high level rugby players pp. S156-S158

A. Kneblewski, L. Valdes-Tamayo, S. Laporte, B. Sandoz, S. Blanchard and P. Rouch

Effect of bow drawing technique on skilled archer postural stability: a case study pp. S159-S161

A. Kuch, J.-F. Debril, M. Domalain, R. Tisserand and T. Monnet

Use of an instrumented hammer as a decision support system during rhinoplasty: validation on an animal model pp. S162-S163

L. Lamassoure, J. Giunta, G. Rosi, A.S. Poudrel, R. Bosc and G. Haïat

Experimental modal analysis of a standard wheelchair: a preliminary study pp. S164-S165

O. Larivière, D. Chadefaux, C. Sauret and P. Thoreux

How do the effective bone properties evolve during normal and pathological calcification? pp. S166-S168

Cédric Laurent, Adrien Baldit, Maude Ferrari, Jean-Christophe Perrin, Alexandre Marano, Arnaud Bianchi and Hervé Kempf

Airborne ultrasound measurement of posturo-respiratory interaction pp. S169-S171

Y. Lespert, V. Attali, T. Similowski, B. Sandoz and R.K. Ing

Evaluation of a simple characterisation method of the 3D-position of a manual wheelchair centre of mass pp. S172-S174

J. Loisel, J. Bascou, Y. Poulet and C. Sauret

Impacts characterisation in Rugby Union pp. S175-S177

Florent Lokteff, Remy Canet, Saad Drissi and Pierre Moretto

Influence of dental implant designs on the strain at the peri-implant cortical bone: a finite element study pp. S178-S179

J. J. Londono, A. Ramos, S. Correa and M. Mesnard

Development of a finite-element muscle model accounting for transverse loading pp. S180-S182

M. Maamir, L. Chèze and B. Fréchède

A minimal biomechanical model for random cell migration pp. S183-S185

I. Manifacier, A. Chauvière, C. Verdier, G. Chagnon, I. Cheddadi, N. Glade and A. Stéphanou

Gait analysis comparison of two twins: one healthy and one with spastic cerebral palsy pp. S186-S188

M. Marchitto, S. Otmani and B. Watier

Comparison of human experimental trajectories and simulations during gait pp. S189-S191

I. Maroger, O. Stasse and B. Watier

Estimating the GRF under one foot knowing the other one during table tennis strokes: a preliminary study pp. S192-S193

T. Marsan, P. Rouch, P. Thoreux, R. Jacquet-Yquel and C. Sauret

A micromechanical framework of arterial tissue growth in the context of medial calcification pp. S194-S196

M. Martin, S. Avril and C. Morin

Calibration of the fat and muscle hyperelastic material parameters for the assessment of the internal tissue deformation in relation to pressure ulcer prevention pp. S197-S199

E. Mukhina, P.-Y. Rohan, N. Connesson and Y. Payan

Quasi-stiffness of intrinsic foot joints during the mid-stance of gait in a healthy population pp. S200-S202

A. Naaim, R. Dumas, L. Cheze, J. L. Besse, B. Devos Bevernage, T. Leemrijse and P. A. Deleu

Studying the effects of facial muscles activations to investigate the optimum positioning of subcutaneous suspension sutures pp. S203-S205

M. A. Nazari, P. Perrier, J. Meadows, M-O Christen, A. Mojallal and Y. Payan

Haemostatic sponges as an alternative to granular bone substitute for sinus lifts pp. S206-S208

S. Okley, C. Mauprivez, P. Prada, M. Dubus, F. Velard, R. Rahouadj, H. Kerdjoudj and A. Baldit

Comparison of adults and children anthropometric tables: mass segment distribution pp. S209-S211

S. Otmani, M. Marchitto, G. Michon and B. Watier

Finite element analysis for prediction of adolescent bone strength: micro vs continuum models pp. S212-S214

S. Ouhsousou, M. Revel, J. Bacchetta and H. Follet

Comparison of lower limb calibration methods for movement analysis with inertial measurement unit (IMU) pp. S215-S217

L. Pacher, C. Chatellier, R. Vauzelle and L. Fradet

Patient-specific, multiscale, myocardial blood flow simulation for coronary artery disease pp. S218-S220

L. Papamanolis, H. J. Kim, C. Jaquet, M. Sinclair, M. Schaap, I. Danad, P. van Diemen, P. Knaapen, L. Najman, H. Talbot, C. A. Taylor and I. E. Vignon-Clementel

Multiscale mechanical characterization of knitted abdominal wall repair meshes pp. S221-S222

Baptiste Pierrat, Nahime Al Abiad, Anicet Le Ruyet and Stéphane Avril

An experimental study of hamstring muscle rupture under different loading modes pp. S223-S225

Baptiste Pillet, Pierre Badel, Pascal Edouard and Baptiste Pierrat

Influence of different footwear on mediolateral stability during gait at different speeds in healthy people pp. S226-S228

E. Polomé, N. Théveniau, C. Vigier, R. Dumas and T. Robert

Biomechanical plausibility of the lucanian fresco tomb proto-gladiators paintings of Paestum: a pilot study pp. S229-S231

C. Pontonnier and S. Salvan

Lumbar lordosis obtained with and without intervertebral thoracic spine motions during rhythmic gymnastics movements: a preliminary study pp. S232-S234

Y. Poulet, C. Eyssartier, T. Marsan, L. Valdes-Tamayo, M. Robert, P. Billard, P. Rouch, P. Thoreux and C. Sauret

Development of MR elastography method to characterize the elastic property of the sterno-cleido-mastoid (SCM) muscle pp. S235-S237

P. Pouletaut, F. Charleux, B. Devauchelle, J.M. Constans, R. Ternifi, S. Boussida, A. Hamaoui, C. Krzisch and S.F. Bensamoun

Hip joint dynamics during the BMX gate start: a case study pp. S238-S240

D. Princelle, M. Domalain, J. F. Debril, E. Brunet, J. Sastre and T. Monnet

Impact of exhaustion level on tibial acceleration signature of amateur runners pp. S241-S243

T. Provot, A. Najdem, L. Valdes-Tamayo and X. Chiementin

Generic kinematical models of the French soldier from a clustered anthropometric database pp. S244-S246

Pierre Puchaud, Georges Dumont, Nicolas Bideau and Charles Pontonnier

Comparison of two methods of fixation with interference screw for cranial cruciate ligament reconstruction in canine cadaver model pp. S247-S249

P. Rafael, B. Goin, P. Buttin, T. Cachon and E. Viguier

Assessment of the permeability of a microvessel-on-chip to small and large molecules pp. S250-S252

C. Ramón-Lozano, C. A. Dessalles, A. Babataheri and A. I. Barakat

A comparison of conventional and machinable PMMA materials for denture pp. S253-S254

G. Ravalec, L. Sadoun, G. Rohman, W. Pacquet, C. Hatege-Kimana, C. Hollmann, O. Desruelle and C. Wulfman

Agent-based modelling of the smooth muscle cells migration induced by mechanical vibration: a preliminary study pp. S255-S256

M. Reda, C. Noel, N. Settembre, J. Chambert, A. Lejeune and E. Jacquet

Specimen-specific finite element prediction of surface strain at the distal radius in a fall configuration pp. S257-S259

M. Revel, F. Bermond, D. Mitton and H. Follet

Ex vivo experiments on femurs to assess metastatic bone strength pp. S260-S261

L. Riglet, C. Confavreux, P. Chaudier, J.-B Pialat, F. Bermond, M. Gardegaront, H. Follet and D. Mitton

Intra- and inter- session reliability of a new method for evaluating toes flexor strength: preliminary study pp. S262-S264

J. Rossi, T. Besson, D. Poncet, G. Y. Millet and C. Y .M. Morio

Biomechanical analysis of different knee angle starting positions in nordic hamstring exercise: preliminary study pp. S265-S267

J. Rossi, S. Vitulli, D. Poncet, P. Edouard, H. Largeron and S. Sangnier

Ex vivo biomechanical evaluation of the primary stability of three different types of femoral stems for total hip replacement in dogs pp. S268-S269

C. Saban, E. Viguier, M. Taroni, A. Baldinger, M. Blondel, C. Carozzo, P. Moissonnier and T. Cachon

Clinical outcomes and functional recovery after temporomandibular joint replacement: a six-month follow-up study pp. S270-S272

E. Sapin-de Brosses, A.-S Bonnet and N. Zwetyenga

Dynamic characterisation of the temporomandibular joint disc using split Hopkinson pressure bars pp. S273-S275

A. Schmitt, D. Sory, L. Tappert, P. Lipinski, W. Proud and A. Baldit

Strain release assessment of the iliotibial band (ITB) when using a pie-crusting technique: a preliminary ex vivo study pp. S276-S278

Y. Sednieva, K. Bruyère-Garnier, A. Naaim, A. Viste and L. L. Gras

In-situ tensile test under microtomography to characterize mechanical behavior of ethmoid bone: a preliminary study pp. S279-S281

V. Serantoni, N. Faraj, G. Subsol, E. Rondet, L. Ollier, G. Captier, F. Jourdan and V. Favier

3D distribution of the forces applied on a load transported by a dyad pp. S282-S284

N. Sghaier, G. Fumery, V. Fourcassie and P. Moretto

Development of a wearable framework for body center of mass acceleration assessment in people with transfemoral amputation pp. S285-S287

E. Simonetti, E. Bergamini, J. Bascou, G. Vannozzi and H. Pillet

Pullout strength of K-wires: optimal solutions analysis pp. S288-S290

L. Tamiti, S. Braymand, N. Bahlouli, H. Jmal and S. Facca

Identification of macro-heterogenous mechanical behaviour of temporomandibular joint disc pp. S291-S293

L. K. Tappert, A. Baldit, C Guillaume, F Velard and P. Lipinski

Implementing a test to assess reaction, attention and inhibition capacity in elderly pp. S294-S296

Juan De la Torre, Vincent Bonnet, Rafael Mauti, Pascal Chabaud and Thomas Robert

Investigation of microstructure evolution and mechanical properties in cardiac tissue pp. S297-S299

N. Tueni, J. Vizet, M. Genet, A. Pierangelo and J. M. Allain

Intraventricular vector flow mapping 3-D by triplane Doppler echocardiography pp. S300-S302

F. Vixege, P. Y. Courand, P. Blanc-Benon, S. Mendez, F. Nicoud, D. Vray and D. Garcia

Morphological characterization of defects in all-ceramic crown adhesive layer pp. S303-S305

Y. Yasothan, K. Shindo, N. Schmitt and E. Vennat

Volume 23, issue 16, 2020

A compressible anisotropic hyperelastic model with I5 and I7 strain invariants pp. 1277-1286

Mn Wang and Fj Liu

A numerical study to determine the effect of strengthening and weakening of the transversus abdominis muscle on lumbar spine loads pp. 1287-1296

Katarzyna Nowakowska-Lipiec, Robert Michnik, Paweł Linek, Andrzej Myśliwiec, Katarzyna Jochymczyk-Woźniak and Marek Gzik

Effect of sagittal split ramus osteotomy on stress distribution of temporomandibular joints in patients with mandibular prognathism under symmetric occlusions pp. 1297-1305

Hedi Ma, Jingheng Shu, Quanyi Wang, Haidong Teng and Zhan Liu

Directed jaya algorithm for delivering nano-robots to cancer area pp. 1306-1316

Doaa Ezzat, Safaa Amin, Howida A. Shedeed and Mohamed F. Tolba

A continuum thermomechanical model for the electrosurgery of soft hydrated tissues using a moving electrode pp. 1317-1335

Wafaa Karaki, Rahul, Carlos A. Lopez, Diana-Andra Borca Tasciuc and Suvranu De

Development and validation of a finite element model of a small female pedestrian pp. 1336-1346

Wansoo Pak, Yunzhu Meng, Jeremy Schap, Bharath Koya, F. Scott Gayzik and Costin D. Untaroiu

The effects of Alzheimer's disease related striatal pathologic changes on the fractional amplitude of low-frequency fluctuations pp. 1347-1359

Yuksel Cakir

Three-dimensional finite element analysis of initial displacement and stress on the craniofacial structures of unilateral cleft lip and palate model during protraction therapy with variable forces and directions pp. 1360-1376

Shahistha Parveen, Akhter Husain, Srinivas Gosla Reddy, Rohan Mascarenhas and Satish Shenoy

Influence of lubricating conditions on the two-body wear behavior and hardness of titanium alloys for biomedical applications pp. 1377-1386

Efe Çetin Yilmaz

Comparison of 3 supraspinatus tendon repair techniques – a 3D computational finite element analysis pp. 1387-1394

C. Quental, J. Reis, J. Folgado, J. Monteiro and M. Sarmento

Volume 23, issue 15, 2020

Biomechanical performance design of joint prosthesis for medical rehabilitation via generative structure optimization pp. 1163-1179

Jinghua Xu, Kang Wang, Mingyu Gao, Zhengxin Tu, Shuyou Zhang and Jianrong Tan

Automated gap-filling for marker-based biomechanical motion capture data pp. 1180-1189

Jonathan Camargo, Aditya Ramanathan, Noel Csomay-Shanklin and Aaron Young

Numerical simulation of deformed red blood cell by utilizing neural network approach and finite element analysis pp. 1190-1200

Ying Wang, Jianbing Sang, Rihan Ao, Yu Ma and Bowei Fu

Predicting population level hip fracture risk: a novel hierarchical model incorporating probabilistic approaches and factor of risk principles pp. 1201-1214

Daniel R. Martel, Martin Lysy and Andrew C. Laing

A global sensitivity analysis approach applied to a multiscale model of microvascular flow pp. 1215-1224

L. Possenti, S. Di Gregorio, G. Casagrande, M. L. Costantino, T. Rancati and P. Zunino

Estimation of joint contact pressure in the index finger using a hybrid finite element musculoskeletal approach pp. 1225-1235

Barthélémy Faudot, Jean-Louis Milan, Benjamin Goislard de Monsabert, Thomas Le Corroller and Laurent Vigouroux

Investigation of dynamic deformation of the midbrain in rear-end collision using human brain FE model pp. 1236-1246

Noritoshi Atsumi, Masami Iwamoto, Yuko Nakahira, Yoshitaka Asano and Jun Shinoda

Test-retest validation of a cranial deformity index in unilateral coronal craniosynostosis pp. 1247-1259

Emilie Robertson, Peter Kwan, Gorman Louie, Pierre Boulanger and Daniel Aalto

Quantification of upper body strategy during gait in children with spastic diplegia using a summary parameter pp. 1260-1266

Veronica Cimolin, Claudia Condoluci, Carlotta Maria Manzia, Gabriella di Girolamo and Manuela Galli

Using intravascular ultrasound image-based fluid-structure interaction models and machine learning methods to predict human coronary plaque vulnerability change pp. 1267-1276

Liang Wang, Dalin Tang, Akiko Maehara, Zheyang Wu, Chun Yang, David Muccigrosso, Mitsuaki Matsumura, Jie Zheng, Richard Bach, Kristen L. Billiar, Gregg W. Stone and Gary S. Mintz

Volume 23, issue 14, 2020

Enhancing the bone healing on electrical stimuli through the dental implant pp. 1041-1051

Letícia Bins-Ely, Daniela Suzuki, Ricardo Magini, Cesar A. M. Benfatti, Wim Teughels, Bruno Henriques and Júlio C. M. Souza

Deep learning approach for prediction of impact peak appearance at ground reaction force signal of running activity pp. 1052-1059

Anastasiia Girka, Juha-Pekka Kulmala and Sami Äyrämö

Regional assessment of vascular morphology and hemodynamics: methodology and evaluation for abdominal aortic aneurysms after endovascular repair pp. 1060-1070

Javier Dottori, Mariano Casciaro, Damian Craiem, Salma El-Batti, Elie Mousseaux, Jean-Marc Alsac and Ignacio Larrabide

Individual muscle contributions to hip joint-contact forces during walking in unilateral transfemoral amputees with osseointegrated prostheses pp. 1071-1081

Vahidreza Jafari Harandi, David Charles Ackland, Raneem Haddara, L. Eduardo Cofré Lizama, Mark Graf, Mary Pauline Galea and Peter Vee Sin Lee

Finite element modal analysis and harmonic response analysis of human arm grasping model pp. 1082-1093

Shuang Liu, Hongmei Xu, Yujun Shang, Wei Jiang and Jiajun Dong

Changes in symmetry during gait in adults with Prader-Willi syndrome pp. 1094-1101

Veronica Cimolin, Massimiliano Pau, Nicola Cau, Bruno Leban, Micaela Porta, Paolo Capodaglio, Alessandro Sartorio, Graziano Grugni and Manuela Galli

Use of the normalcy index for the assessment of abnormal gait in the anterior cruciate ligament deficiency combined with meniscus injury pp. 1102-1108

Xiaode Liu, Hongshi Huang, Shuang Ren, Qiguo Rong and Yingfang Ao

Biomechanical evaluation of anterior and posterior lumbar surgical approaches on the adjacent segment: a finite element analysis pp. 1109-1116

Bingjin Wang, Wencan Ke, Wenbin Hua, Saideng Lu, Xianlin Zeng and Cao Yang

Influence of glenohumeral joint muscle insertion on moment arms using a finite element model pp. 1117-1126

M. Hoffmann, M. Begon, Y. Lafon and S. Duprey

Bulk Fill flow resin contraction using 3D finite element model and calibration by Fiber Bragg Grating measurement pp. 1127-1137

Claudio Antunes Junior, Emílio Graciliano Ferreira Mercuri, Ana Paula Gebert de Oliveira Franco, Manoella Costa, Leandro Zen Karam, Hypolito José Kalinowski and Osnara Maria Mongruel Gomes

Image-based finite-element modeling of the human femur pp. 1138-1161

Cristina Falcinelli and Cari Whyne

Volume 23, issue 13, 2020

Innovative decision support for scoliosis brace therapy based on statistical modelling of markerless 3D trunk surface data pp. 923-933

Stephan Rothstock, Hans-Rudolf Weiss, Daniel Krueger, Victoria Kleban and Lothar Paul

Finite element models can reproduce the effect of nucleotomy on the multi-axial compliance of human intervertebral discs pp. 934-944

Marc A. Stadelmann, Roland Stocker, Ghislain Maquer, Sven Hoppe, Peter Vermathen, Ron N. Alkalay and Philippe K. Zysset

Robust evolutionary shape optimization for ergonomic excellence based on contact pressure distribution pp. 945-958

Igor Pehnec, Ivo Marinić-Kragić and Damir Vučina

The influence of musculoskeletal forces on the growth of the prenatal cortex in the ilium: a finite element study pp. 959-967

Peter J. Watson, Michael J. Fagan and Catherine A. Dobson

Numerical analysis of local non-equilibrium heat transfer in layered spherical tissue during magnetic hyperthermia pp. 968-980

Kuo-Chi Liu and Yu-Ching Yang

A comparison between the mechanical properties of the hepatic round ligament and the portal vein: a clinical implication on surgical reconstruction of the portal and superior mesenteric veins pp. 981-986

Wentao Zhu, Rongqiang Song, Xuefeng Cao, Lei Zhou, Qiang Wei, Haibin Ji and Rongzhan Fu

An image-based geometric model for numerical simulation of blood perfusion within the liver lobules pp. 987-1004

R. Ahmadi-Badejani, M. Mosharaf-Dehkordi and H. Ahmadikia

Effect of the dimensions of implant body and thread on bone resorption and stability in trapezoidal threaded dental implants: a sensitivity analysis and optimization pp. 1005-1013

Mohammad Reza Niroomand and Masoud Arabbeiki

Predicting longitudinal changes in joint contact forces in a juvenile population: scaled generic versus subject-specific musculoskeletal models pp. 1014-1025

Claude Fiifi Hayford, Erica Montefiori, Emma Pratt and Claudia Mazzà

Accurate reconstructions of pelvic defects and discontinuities using statistical shape models pp. 1026-1033

Alexander Meynen, Harold Matthews, Nele Nauwelaers, Peter Claes, Michiel Mulier and Lennart Scheys

Thread shape affects the stress distribution of torque force on miniscrews: a finite element analysis pp. 1034-1040

Yu-shan Ye, Wei-min Yi, Pei-lin Zhuang, Mo Liu, Yan-song Yu, Ying-juan Lu, Qing-he Yao, Wei Wang and Shao-hai Chang

Volume 23, issue 12, 2020

Percutaneous posterior full-endoscopic cervical foraminotomy and discectomy: a finite element analysis and radiological assessment pp. 805-814

Wencan Ke, Jinggang Zhi, Wenbin Hua, Bingjin Wang, Saideng Lu, Lina Fan, Li Li and Cao Yang

Computational model of stent-based delivery from a half-embedded two-layered coating pp. 815-831

Sarifuddin, Somnath Roy and Prashanta Kumar Mandal

Contribution of injured posterior ligamentous complex and intervertebral disc on post-traumatic instability at the cervical spine pp. 832-843

Marie-Hélène Beauséjour, Yvan Petit, Jeremy Hagen, Pierre-Jean Arnoux, Jean-Marc Mac Thiong and Eric Wagnac

A strathclyde cluster model for gait kinematic measurement using functional methods: a study of inter-assessor reliability analysis with comparison to anatomical models pp. 844-853

Lin Meng, Lindsay Millar, Craig Childs and Arjan Buis

Multi-objective reliability based design optimization using Kriging surrogate model for cementless hip prosthesis pp. 854-867

Khalil Dammak and Abdelkhalak El Hami

Application of an enhanced homogenization technique to the structural multiscale analysis of a femur bone pp. 868-878

M. Marques, J. Belinha, A. F. Oliveira, M. C. Manzanares Céspedes and R. M Natal Jorge

Non - invasive modelling methodology for the diagnosis of coronary artery disease using fuzzy cognitive maps pp. 879-887

Ioannis D. Apostolopoulos and Peter P. Groumpos

Effectiveness of robot-assisted gait training on patients with burns: a preliminary study pp. 888-893

So Young Joo, Seung Yeol Lee, Yoon Soo Cho, Kuem Ju Lee, Sang-Hyun Kim and Cheong Hoon Seo

Numerical study of hemodynamic and diagnostic parameters affected by stenosis in bifurcated artery pp. 894-905

Jianfei Song, Smaine Kouidri and Farid Bakir

Biomechanical effects of screw orientation and plate profile on tibial condylar valgus osteotomy - Finite-element analysis pp. 906-913

Chih-Ting Cheng, Chu-An Luo and Yi-Chih Chen

Relative contributions and capacities of lower extremity muscles to accelerate the body’s center of mass during countermovement jumps pp. 914-921

Kristof Kipp and Hoon Kim

Volume 23, issue 11, 2020

Effect of gap outside contact area on lubrication of metal-on-Metal total hip replacement pp. 675-689

Ali A. Al-Saffar and Sam L. Evans

Development of a test method for adult ice hockey helmet evaluation pp. 690-702

Andrew Post, Lauren Dawson, T. Blaine Hoshizaki, Michael D. Gilchrist and Michael D. Cusimano

Two efficient static optimization algorithms that account for muscle-tendon equilibrium: approaching the constraint Jacobian via a constant or a cubic spline function pp. 703-709

Benjamin Michaud and Mickaël Begon

Outbreak dynamics of COVID-19 in Europe and the effect of travel restrictions pp. 710-717

Kevin Linka, Mathias Peirlinck, Francisco Sahli Costabal and Ellen Kuhl

Prediction of patellofemoral joint kinematics and contact through co-simulation of rigid body dynamics and nonlinear finite element analysis pp. 718-733

Jacobus H. Müller, Swithin Razu, Ahmet Erdemir and Trent M. Guess

Positioning human body models for crashworthiness using model order reduction pp. 734-743

G. Bacquaert, C. Bach, D. Draper, S. Peldschus and F. Duddeck

Numerical study to identify the effect of fluid presence on the mechanical behavior of the stents during coronary stent expansion pp. 744-754

Wookjin Lee, Seong Wook Cho, Usaid K. Allahwala and Ravinay Bhindi

Development and calibration of a probabilistic finite element hip capsule representation pp. 755-764

Casey A. Myers, Clare K. Fitzpatrick, Daniel N. Huff, Peter J. Laz and Paul J. Rullkoetter

What are the effects of simulated muscle weakness on the sit-to-stand transfer? pp. 765-772

Elena J. Caruthers, Grant Schneider, Laura C. Schmitt, Ajit M. W. Chaudhari and Robert A. Siston

Fatigue damage prediction in the annulus of cervical spine intervertebral discs using finite element analysis pp. 773-784

Adhitya V. Subramani, Phillip E. Whitley, Harsha T. Garimella and Reuben H. Kraft

Forward and inverse dynamics modeling of human shoulder-arm musculoskeletal system with scapulothoracic constraint pp. 785-803

Tingli Hu, Johannes Kühn and Sami Haddadin

Volume 23, issue 10, 2020

Contribution of foot joints in the energetics of human running pp. 557-563

Kevin Deschamps, Giovanni Matricali, Helen Peters, Maarten Eerdekens, Sander Wuite, Alberto Leardini and Filip Staes

Fatigue effects on the viscoelastic behavior of men and women in a landing task: a Mass–Spring–Damper modeling approach pp. 564-570

Sahar Boozari, Mohammad Ali Sanjari, Ali Amiri and Ismail Ebrahimi Takamjani

The effect of Womersley number and particle radius on the accumulation of lipoproteins in the human aorta pp. 571-584

Xueping Chen, Jian Zhuang and Yueheng Wu

A finite element analysis of the intra-abdominal pressure and paraspinal muscle compartment pressure interaction through the thoracolumbar fascia pp. 585-596

Khaled El-Monajjed and Mark Driscoll

An in silico rat liver atlas pp. 597-600

Harvey Ho, Uta Dahmen and Peter Hunter

Effect of metastatic lesion size and location on the load-bearing capacity of vertebrae using an optimized ash density-modulus equation pp. 601-610

Sebastian Saldarriaga, Simon Jimenez Cataño, Asghar Rezaei and Hugo Giambini

Development of a novel hybrid method combining finite difference method and dissipative particle dynamics to simulate thrombus formation on orifice flow pp. 611-626

Y. Yi and M. Tamagawa

Analysis of temporomandibular joint dysfunction in paediatric patients with unilateral crossbite using automatically generated finite element models pp. 627-641

Javier Ortún-Terrazas, José Cegoñino, Edson Illipronti-Filho and Amaya Pérez del Palomar

Integration of cortical thickness data in a statistical shape model of the scapula pp. 642-648

Jonathan Pitocchi, Roel Wirix-Speetjens, G. Harry van Lenthe and María Ángeles Pérez

Using artificial neural networks to predict impingement and dislocation in total hip arthroplasty pp. 649-657

D. Alastruey-López, L. Ezquerra, B. Seral and M. A. Pérez

A custom musculoskeletal model for estimation of medial and lateral tibiofemoral contact forces during tasks with high knee and hip flexions pp. 658-663

Bruno Luiz Souza Bedo, Danilo S. Catelli, Mario Lamontagne and Paulo Roberto Pereira Santiago

Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis pp. 664-674

Samadi B, Raison M, Achiche S and Fortin C

Volume 23, issue 9, 2020

Is it possible to detect a true rotation axis of the temporomandibular joint with common pantographic methods? A fundamental kinematic analysis pp. 445-455

Albert Mehl

Biomechanical analysis of segmental lumbar lordosis and risk of cage subsidence with different cage heights and alternative placements in transforaminal lumbar interbody fusion pp. 456-466

Sajjad Rastegar, Pierre-Jean Arnoux, Xiaoyu Wang and Carl-Éric Aubin

The effect of hemodynamic parameters in patient-based coronary artery models with serial stenoses: normal and hypertension cases pp. 467-475

K. E. Hoque, M. Ferdows, S. Sawall and E. E. Tzirtzilakis

Hybrid triad provides fracture plane stability in a computational model of a Pauwels Type III hip fracture pp. 476-483

M. Cordeiro, S. Caskey, C. Frank, S. Martin, A. Srivastava and T. Atkinson

Simulated anterior translation and medial rotation of the talus affect ankle joint contact forces during vertical hopping pp. 484-490

Hoon Kim and Kristof Kipp

Lattice Boltzmann simulation of swelling of an implant for microtia manufactured with IPN hydrogel pp. 491-499

Pedro J. Boschetti, Orlando Pelliccioni, Keisly Da Costa and Marcos A. Sabino

Simulated brain strains resulting from falls differ between concussive events of young children and adults pp. 500-509

David Koncan, Michael Gilchrist, Michael Vassilyadi and Thomas B. Hoshizaki

Blood transfusion prediction using restricted Boltzmann machines pp. 510-517

Jenny Cifuentes, Yuanyuan Yao, Min Yan and Bin Zheng

Impact of screw thread shape on stress transfer in bone: a finite element study pp. 518-523

Emmanuel Tetteh and Matthew B. A. McCullough

Visco-elastic behavior of articular cartilage under applied magnetic field and strain-dependent permeability pp. 524-535

Usman Ali and Javed I. Siddique

Sensitivities of lumbar segmental kinematics and functional tissue loads in sagittal bending to design parameters of a ball-in-socket total disc arthroplasty prosthesis pp. 536-547

Chaochao Zhou and Ryan Willing

The biomechanical study of a modified lumbar interbody fusion—crenel lateral interbody fusion (CLIF): a three-dimensional finite-element analysis pp. 548-555

Yun-lin Chen, Ou-jie Lai, Yang Wang, Wei-hu Ma and Qi-xin Chen

Volume 23, issue 8, 2020

A biomechanical model of the pathological aortic valve: simulation of aortic stenosis pp. 303-311

Marcos Loureiro-Ga, Cesar Veiga, Generosa Fdez-Manin, Victor Alfonso Jimenez, Francisco Calvo-Iglesias and Andres Iñiguez

Analysis of fiber strain in the human tongue during speech pp. 312-322

Arnold D. Gomez, Maureen L. Stone, Jonghye Woo, Fangxu Xing and Jerry L. Prince

Comparison of two different bowel anastomosis types using finite volume method pp. 323-331

Yavuz Pirhan, Kadir Gök and Arif Gök

Null strain analysis of submerged aneurysm analogues using a novel 3D stereomicroscopy device pp. 332-344

Brooks A. Lane, Susan M. Lessner, Narendra R. Vyavahare, Michael A. Sutton and John F. Eberth

Computational fluid dynamic simulation of two-fluid non-Newtonian nanohemodynamics through a diseased artery with a stenosis and aneurysm pp. 345-371

Ankita Dubey, B. Vasu, O. Anwar Bég, Rama S. R. Gorla and Ali Kadir

Assessment of stress/strain in dental implants and abutments of alternative materials compared to conventional titanium alloy—3D non-linear finite element analysis pp. 372-383

Pedro Henrique Wentz Tretto, Mateus Bertolini Fernandes dos Santos, Aloisio Oro Spazzin, Gabriel Kalil Rocha Pereira and Atais Bacchi

Minimally invasive transforaminal and anterior lumbar interbody fusion surgery at level L5-S1 pp. 384-395

D. S. Fidalgo, B. Areias, L. C. Sousa, M. Parente, R. N. Jorge, H. Sousa and J. M. Gonçalves

Atomistic to continuum model for studying mechanical properties of RNA nanotubes pp. 396-407

Shyam Badu, Sanjay Prabhakar, Roderick Melnik and Sundeep Singh

Numerical simulation of lateral and transforaminal lumbar interbody fusion, two minimally invasive surgical approaches pp. 408-421

B. Areias, S. C. Caetano, L. C. Sousa, M. Parente, R. N. Jorge, H. Sousa and J. M. Gonçalves

Finite element submodeling technique to analyze the contact pressure and wear of hard bearing couples in hip prosthesis pp. 422-431

S. Shankar, R. Nithyaprakash, B. R Santhosh, M. S. Uddin and Alokesh Pramanik

On biological availability dependent bone remodeling pp. 432-444

Areti Papastavrou, Ina Schmidt and Paul Steinmann

Volume 23, issue 7, 2020

Occlusal load modelling significantly impacts the predicted tooth stress response during biting: a simulation study pp. 261-270

Harnoor Saini, David C. Ackland, Lulu Gong, Leo K., Cheng and Oliver Röhrle

Studying the effects of asymmetry on freestyle swimming using smoothed particle hydrodynamics pp. 271-284

Raymond C. Z. Cohen, Paul W. Cleary, Bruce R. Mason and David L. Pease

Optimizing neotissue growth inside perfusion bioreactors with respect to culture and labor cost: a multi-objective optimization study using evolutionary algorithms pp. 285-294

Mohammad Mehrian and Liesbet Geris

Biomechanical effects of corticotomy facilitated orthodontic anterior retraction: a 3-dimensional finite element analysis pp. 295-302

Yang Liu, Yan Wu, Chongshi Yang, Jinlin Song and Yubo Fan

Volume 23, issue 6, 2020

Characterization of hyperelastic and damage behavior of tendons pp. 213-223

J. A. López-Campos, J. P. S. Ferreira, A. Segade, J. R. Fernández and R. M. Natal

Influence of Socket-shield technique on the biomechanical response of dental implant: three-dimensional finite element analysis pp. 224-231

João Paulo Mendes Tribst, Amanda Maria de Oliveira Dal Piva, Alexandre Luiz Souto Borges and Marco Antonio Bottino

Effect of asymmetry on the flow behavior in an idealized arterial bifurcation pp. 232-247

Mahesh Nagargoje and Raghvendra Gupta

Multisite pacing and myocardial scars: a computational study pp. 248-260

Mohammad Albatat, Jacob Bergsland, Hermenegild Arevalo, Hans Henrik Odland, Samuel Wall, Joakim Sundnes and Ilangko Balasingham

Volume 23, issue 5, 2020

Assessment of the shock adsorption properties of bike helmets: a numerical/experimental approach pp. 169-181

Massimiliano Bocciarelli, Valter Carvelli, Stefano Mariani and Matteo Tenni

In silico study of glenoid perforation during total shoulder arthroplasty: the effects on stress & micromotion pp. 182-190

Abdul Hadi Abdul Wahab, Amir Putra Md Saad, Ardiyansyah Syahrom and Mohammed Rafiq Abdul Kadir

Occupant kinematics and biomechanics during frontal collision in autonomous vehicles—can rotatable seat provides additional protection? pp. 191-200

Hequan Wu, Haibin Hou, Ming Shen, King H. Yang and Xin Jin

The influence of the elastic modulus of the plaque in carotid artery on the computed results of FFRCT pp. 201-211

Kesong Xu, Long Yu, Jun Wan, Shengzhang Wang and Haiyan Lu

Volume 23, issue 4, 2020

Biomechanical study of medial meniscus after posterior horn injury: a finite element analysis pp. 127-137

Peishi Jiang, Juncheng Cui, Zhiwei Chen, Zhu Dai, Yangchun Zhang and Guoliang Yi

An in silico pipeline for subject-specific hemodynamics analysis in liver surgery planning pp. 138-142

H. Ho, H. B. Yu, A. Bartlett and P. Hunter

Analytical and computational sliding wear prediction in a novel knee implant: a case study pp. 143-154

Mohd Sabri Hussin, Justin Fernandez, Maziar Ramezani, Pranesh Kumar and Piaras A. Kelly

Individualized prediction of pedicle screw fixation strength with a finite element model pp. 155-167

Jonas Widmer, Marie-Rosa Fasser, Eleonora Croci, José Spirig, Jess G. Snedeker and Mazda Farshad

Volume 23, issue 3, 2020

Effect of axial prestretch and adipose tissue on the inflation-extension behavior of the human abdominal aorta pp. 81-91

Tereza Voňavková and Lukáš Horný

Elementwise material assignment in reconstructed or transformed patient-specific FEA models developed from CT scans pp. 92-102

Peter Schwarzenberg and Hannah L. Dailey

Characterization of the anisotropic deformation of the right ventricle during open heart surgery pp. 103-113

A. Soltani, J. Lahti, K. Järvelä, J. Laurikka, V.-T. Kuokkala and M. Hokka

Accuracy and kinematics consistency of marker-based scaling approaches on a lower limb model: a comparative study with imagery data pp. 114-125

P. Puchaud, C. Sauret, A. Muller, N. Bideau, G. Dumont, H. Pillet and C. Pontonnier

Volume 23, issue 2, 2020

Influence of population variability in ligament material properties on the mechanical behavior of ankle: a computational investigation pp. 43-53

Yuanjie Liu, Qing Zhou, Shun Gan and Bingbing Nie

Relating mechanical properties of vertebral trabecular bones to osteoporosis pp. 54-68

R. Cesar, J. Bravo-Castillero, R. R. Ramos, C. A. M. Pereira, H. Zanin and J. M. D. A. Rollo

Finite element modeling and static/dynamic validation of thoracolumbar-pelvic segment pp. 69-80

Li-Xin Guo and Wu-Jie Li

Volume 23, issue 1, 2020

Three-dimensional structural optimization of a cementless hip stem using a bi-directional evolutionary method pp. 1-11

Reza Rahchamani and Reza Soheilifard

Depth camera based statistical shape fitting approach for the creation of an individualized lower body biomechanical model: validity and reliability pp. 12-22

Bertram Taetz, Wolfgang Teufl, Alexander Weidmann, Juliane Pietschmann, Thomas Jöllenbeck and Gabriele Bleser

Personalized hip joint kinetics during deep squatting in young, athletic adults pp. 23-32

Jan Van Houcke, Pavel E. Galibarov, Gilles Van Acker, Sigrid Fauconnier, Ellen Allaert, Tom Van Hoof, Diogo F. Almeida, Gunther Steenackers, Christophe Pattyn and Emmanuel A. Audenaert

A computational fluid dynamics study pre- and post-fistula closure in a coronary artery fistula pp. 33-42

Haoyao Cao, Yue Qiu, Ding Yuan, Jianqun Yu, Da Li, Yi Jiang, Li Su, Liqing Peng and Tinghui Zheng