Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 20, issue S1, 2017

Intervertebral efforts quantification using a multibody dynamics approach: application to scoliosis pp. 1-2

G. Abedrabbo, O. Cartiaux, P. Mahaudens, C. Detrembleur, M. Mousny and P. Fisette

Intervertebral efforts quantification using a multibody dynamics approach: application to scoliosis pp. S1-S2

G. Abedrabbo, O. Cartiaux, P. Mahaudens, C. Detrembleur, M. Mousny and P. Fisette

Design and implementation of an electronic goniometer for gait analysis pp. 3-4

C. Adel, Y. Benabid and M. A. Louar

Design and implementation of an electronic goniometer for gait analysis pp. S3-S4

C. Adel, Y. Benabid and M. A. Louar

Reducing the number of cameras and increasing the calibrated volume for motion capture pp. S5-S6

A. Aissaoui, P. Pudlo, I. Aloui, A. Ouafi and A. Taleb-Ahmed

Reducing the number of cameras and increasing the calibrated volume for motion capture pp. 5-6

A. Aissaoui, P. Pudlo, I. Aloui, A. Ouafi and A. Taleb-Ahmed

Assessment of power losses due to ground contact forces during usual manual wheelchair movements pp. S7-S8

J. Bascou, C. Fallot, H. Pillet, S. Hybois, F. Lavaste and C. Sauret

Assessment of power losses due to ground contact forces during usual manual wheelchair movements pp. 7-8

J. Bascou, C. Fallot, H. Pillet, S. Hybois, F. Lavaste and C. Sauret

Analysis of human-exoskeleton interactions: an elbow flexion/extension case study pp. 9-10

S. Bastide, N. Vignais, F. Geffard and B. Berret

Analysis of human-exoskeleton interactions: an elbow flexion/extension case study pp. S9-S10

S. Bastide, N. Vignais, F. Geffard and B. Berret

Analysis of the effect of helmet shape and head position on performance during time-trial cycling pp. 11-12

F. Beaumont, R. Taiar, G. Polidori, H. Zaidi and F. Grappe

Analysis of the effect of helmet shape and head position on performance during time-trial cycling pp. S11-S12

F. Beaumont, R. Taiar, G. Polidori, H. Zaidi and F. Grappe

Finite element analysis of mechanical behavior of stabilization techniques for tibial plateau fractures pp. 13-14

D. Belaid, A. Germaneau, A. Bouchoucha, F. Brémand, C. Brèque, P. Rigoard and T. Vendeuvre

Finite element analysis of mechanical behavior of stabilization techniques for tibial plateau fractures pp. S13-S14

D. Belaid, A. Germaneau, A. Bouchoucha, F. Brémand, C. Brèque, P. Rigoard and T. Vendeuvre

Toward low cost system for real time monitoring of spine movement pp. S15-S16

K. Ben Mansour, F. Crison, C. Trabelsi, C. Palazzo, A. Roren and E. Klinger

Toward low cost system for real time monitoring of spine movement pp. 15-16

K. Ben Mansour, F. Crison, C. Trabelsi, C. Palazzo, A. Roren and E. Klinger

Effects of foot progression angle on knee biomechanics during gait modification pp. S17-S18

S. Bennour, B. Ulrich, T. Legrand, B. Jolles and J. Favre

Effects of foot progression angle on knee biomechanics during gait modification pp. 17-18

S. Bennour, B. Ulrich, T. Legrand, B. Jolles and J. Favre

Effects of shoe drop on running mechanics in women pp. S19-S20

T. Besson, C. Morio and J. Rossi

Effects of shoe drop on running mechanics in women pp. 19-20

T. Besson, C. Morio and J. Rossi

Lung tissue modelling under non-penetrating impact: a comparative investigation on numerical injury criteria pp. S21-S22

M. Bodo and S. Roth

Lung tissue modelling under non-penetrating impact: a comparative investigation on numerical injury criteria pp. 21-22

M. Bodo and S. Roth

Acute effect of biomechanical foot orthotics on gross efficiency in cyclists affected by an anatomic asymmetry in time trial position pp. 23-24

A. Bouillod, M. Retali, G. Soto-Romero, E. Brunet, M. Frémeaux, J. Cassirame, J. Maillot and F. Grappe

Acute effect of biomechanical foot orthotics on gross efficiency in cyclists affected by an anatomic asymmetry in time trial position pp. S23-S24

A. Bouillod, M. Retali, G. Soto-Romero, E. Brunet, M. Frémeaux, J. Cassirame, J. Maillot and F. Grappe

Overcorrected glenoid implants to prevent recurrent glenohumeral subluxation after total shoulder arthroplasty: a patient-specific finite element analysis pp. S25-S26

Y. Boulanaache, S. Bergamin, F. Becce, A. Farron and A. Terrier

Overcorrected glenoid implants to prevent recurrent glenohumeral subluxation after total shoulder arthroplasty: a patient-specific finite element analysis pp. 25-26

Y. Boulanaache, S. Bergamin, F. Becce, A. Farron and A. Terrier

Design process of custom-fitted interbody cage for lumbar spinal fusion pp. S27-S28

M. Bounabi, Y. Benabid, A.C. Messellek, A. Azzouz and S. Abid

Design process of custom-fitted interbody cage for lumbar spinal fusion pp. 27-28

M. Bounabi, Y. Benabid, A.C. Messellek, A. Azzouz and S. Abid

Contribution of vertical and horizontal components of ground reaction forces on global motor moment during a golf swing: a preliminary study pp. 29-30

M. Bourgain, C. Sauret, O. Rouillon, P. Thoreux and P. Rouch

Contribution of vertical and horizontal components of ground reaction forces on global motor moment during a golf swing: a preliminary study pp. S29-S30

M. Bourgain, C. Sauret, O. Rouillon, P. Thoreux and P. Rouch

Methodology for ballistic blunt trauma assessment pp. S31-S32

A. Bracq, C. Maréchal, R. Delille, B. Bourel, S. Roth and O. Mauzac

Methodology for ballistic blunt trauma assessment pp. 31-32

A. Bracq, C. Maréchal, R. Delille, B. Bourel, S. Roth and O. Mauzac

Relationship between cerebral aneurysm wall stiffness and rupture risk pp. 33-34

H. Brunel, D. Ambard, H. Dufour, P. H. Roche, V. Costalat and F. Jourdan

Relationship between cerebral aneurysm wall stiffness and rupture risk pp. S33-S34

H. Brunel, D. Ambard, H. Dufour, P. H. Roche, V. Costalat and F. Jourdan

Finite element model of a below-knee amputation: a feasibility study pp. 35-36

D. Campion, N. Dakhil, M. Llari, M. Evin, F. Mo, L. Thefenne and M. Behr

Finite element model of a below-knee amputation: a feasibility study pp. S35-S36

D. Campion, N. Dakhil, M. Llari, M. Evin, F. Mo, L. Thefenne and M. Behr

Mechanical performance determinants in women’s vs men’s pole-vault pp. 37-38

J. Cassirame, H. Sanchez, S. Homo and J. Frère

Mechanical performance determinants in women’s vs men’s pole-vault pp. S37-S38

J. Cassirame, H. Sanchez, S. Homo and J. Frère

Prediction of intervertebral disc mechanical response to axial load using isotropic and fiber reinforced FE models pp. 39-40

M. A. Chetoui, O. Boiron, A. Dogui and V. Deplano

Prediction of intervertebral disc mechanical response to axial load using isotropic and fiber reinforced FE models pp. S39-S40

M. A. Chetoui, O. Boiron, A. Dogui and V. Deplano

Breathing through a spirometer perturbs balance pp. 41-42

L. Clavel, V. Attali, O. Jacq, Mc. Nierat, T. Similowski, P. Rouch and B. Sandoz

Breathing through a spirometer perturbs balance pp. S41-S42

L. Clavel, V. Attali, O. Jacq, Mc. Nierat, T. Similowski, P. Rouch and B. Sandoz

Muscle Contraction and Pressure-Volume Loops in the Left-Heart pp. 43-44

J. I. Colorado-Cervantes, Valerio Varano, Luciano Teresi and Vittorio Sansalone

Muscle Contraction and Pressure-Volume Loops in the Left-Heart pp. S43-S44

J. I. Colorado-Cervantes, Valerio Varano, Luciano Teresi and Vittorio Sansalone

Experimental Bench for Hemodynamic Study of Coronary Artery with Serial Stenoses: Fractional Flow Reserve Assessment pp. S45-S46

R. Coppel, Al. Gomez, G. Finet, M. Mauro, Ri. Pettigrew, J. Ohayon and M. Lagache

Experimental Bench for Hemodynamic Study of Coronary Artery with Serial Stenoses: Fractional Flow Reserve Assessment pp. 45-46

R. Coppel, Al. Gomez, G. Finet, M. Mauro, Ri. Pettigrew, J. Ohayon and M. Lagache

A 3D finite element model to predict the arcade-like collagen structure in a layered PCL scaffold for cartilage tissue engineering pp. S47-S48

S. Cortez, F. L. Freitas, A. Completo and J. L. Alves

A 3D finite element model to predict the arcade-like collagen structure in a layered PCL scaffold for cartilage tissue engineering pp. 47-48

S. Cortez, F. L. Freitas, A. Completo and J. L. Alves

Comparison of rotation tensor extracted from affine approximation and least square optimization pp. S49-S50

M. Couvertier, M. Begon, A. Germaneau, P. Lacouture and T. Monnet

Comparison of rotation tensor extracted from affine approximation and least square optimization pp. 49-50

M. Couvertier, M. Begon, A. Germaneau, P. Lacouture and T. Monnet

Comparison of peak vertical force and vertical impulse in the inside and outside hind limbs in horses circling on a soft surface, at trot and canter pp. S51-S52

N. Crevier-Denoix, F. Munoz-Nates, M. Camus, B. Ravary-Plumioen, J.M. Denoix, P. Pourcelot and H. Chateau

Comparison of peak vertical force and vertical impulse in the inside and outside hind limbs in horses circling on a soft surface, at trot and canter pp. 51-52

N. Crevier-Denoix, F. Munoz-Nates, M. Camus, B. Ravary-Plumioen, J.M. Denoix, P. Pourcelot and H. Chateau

Postural adaptations to unilateral knee joint hypomobility induced by orthosis wear during gait initiation pp. S53-S54

A. Delafontaine, P. Fourcade, J. L. Honeine, S. Ditcharles and E. Yiou

Postural adaptations to unilateral knee joint hypomobility induced by orthosis wear during gait initiation pp. 53-54

A. Delafontaine, P. Fourcade, J. L. Honeine, S. Ditcharles and E. Yiou

Preliminary clusters analysis based on functional disability scales for chronic Low Back Pain. Kinematic and EMG differences pp. 55-56

Y. Delpierre, M. Ritz and C. Garnier

Preliminary clusters analysis based on functional disability scales for chronic Low Back Pain. Kinematic and EMG differences pp. S55-S56

Y. Delpierre, M. Ritz and C. Garnier

Effect of intra-tibial injection on mechanical properties of mouse bone pp. 57-58

B. Delpuech, C. Confavreux, L. Bouazza, S. Geraci, P. Clezardin, D. Mitton and H. Follet

Effect of intra-tibial injection on mechanical properties of mouse bone pp. S57-S58

B. Delpuech, C. Confavreux, L. Bouazza, S. Geraci, P. Clezardin, D. Mitton and H. Follet

Improving multilevel surgery planning and predicting post-operative outcome in cerebral palsy pp. S59-S60

E. Desailly, O. C. Galarraga and N. Khouri

Improving multilevel surgery planning and predicting post-operative outcome in cerebral palsy pp. 59-60

E. Desailly, O. C. Galarraga and N. Khouri

Assessment of the effect of rectus femoris transfer by propensity score matching in cerebral palsy pp. 61-62

E. Desailly, A. L. Guinet, A. Badina and N. Khouri

Assessment of the effect of rectus femoris transfer by propensity score matching in cerebral palsy pp. S61-S62

E. Desailly, A. L. Guinet, A. Badina and N. Khouri

Estimation of the wrist joint center of rotation pp. S63-S64

P. Devos, C. Hansen, K. Ben Mansour and F. Marin

Estimation of the wrist joint center of rotation pp. 63-64

P. Devos, C. Hansen, K. Ben Mansour and F. Marin

A collision-based analysis of the landing-takeoff asymmetry during running pp. 65-66

A. H. Dewolf and P. A. Willems

A collision-based analysis of the landing-takeoff asymmetry during running pp. S65-S66

A. H. Dewolf and P. A. Willems

Differences in theoretical self-stability between manual and electrically power-assisted city-bikes for women pp. 67-68

S. Dieltiens, J. D’hondt, M. Juwet and M. Versteyhe

Differences in theoretical self-stability between manual and electrically power-assisted city-bikes for women pp. S67-S68

S. Dieltiens, J. D’hondt, M. Juwet and M. Versteyhe

Biomechanical adaptation of preferred transition speed during an incremental test in a gradient slope pp. 69-70

G. Doucende, C. Rissetto, L. Mourot and J. Cassirame

Biomechanical adaptation of preferred transition speed during an incremental test in a gradient slope pp. S69-S70

G. Doucende, C. Rissetto, L. Mourot and J. Cassirame

Muscular activity variations of the right bowing arm of the violin player pp. 71-72

S. Duprey, B. Michaud and M. Begon

Muscular activity variations of the right bowing arm of the violin player pp. S71-S72

S. Duprey, B. Michaud and M. Begon

Characterization of deproteinized dentin for its use in bone tissue engineering pp. 73-74

C. Fichant, B. David, T. Reiss, N. Roubier and E. Vennat

Characterization of deproteinized dentin for its use in bone tissue engineering pp. S73-S74

C. Fichant, B. David, T. Reiss, N. Roubier and E. Vennat

Subject specific hexahedral Finite Element mesh generation of the pelvis from bi-Planar X-ray images pp. S75-S76

N. Fougeron, A. Macron, H. Pillet, W. Skalli and P.Y. Rohan

Subject specific hexahedral Finite Element mesh generation of the pelvis from bi-Planar X-ray images pp. 75-76

N. Fougeron, A. Macron, H. Pillet, W. Skalli and P.Y. Rohan

Which functional movements for sensor-to-segment calibration for lower-limb movement analysis with inertial sensors? pp. S77-S78

L. Fradet, A. Nez, T. Monnet and P. Lacouture

Which functional movements for sensor-to-segment calibration for lower-limb movement analysis with inertial sensors? pp. 77-78

L. Fradet, A. Nez, T. Monnet and P. Lacouture

Quantification of the stress generated by the endoscopic movement in the brain parenchyma during intra ventricular surgical procedure pp. S79-S80

Pm. François, B. Sandoz, P. Decq and S. Laporte

Quantification of the stress generated by the endoscopic movement in the brain parenchyma during intra ventricular surgical procedure pp. 79-80

Pm. François, B. Sandoz, P. Decq and S. Laporte

Intra cranial volume quantification from 3D reconstruction based on CT-scan data pp. 81-82

Pm. François, B. Sandoz, S. Laporte and P. Decq

Intra cranial volume quantification from 3D reconstruction based on CT-scan data pp. S81-S82

Pm. François, B. Sandoz, S. Laporte and P. Decq

Influence of pole carriage on sprint mechanical properties during pole vault run-up pp. 83-84

J. Frère, H. Sanchez, S. Homo, G. Rabita, Jb. Morin and J. Cassirame

Influence of pole carriage on sprint mechanical properties during pole vault run-up pp. S83-S84

J. Frère, H. Sanchez, S. Homo, G. Rabita, Jb. Morin and J. Cassirame

Predictive simulation of surgery effect on cerebral palsy gait pp. S85-S86

O. C. Galarraga, V. Vigneron, N. Khouri, B. Dorizzi and E. Desailly

Predictive simulation of surgery effect on cerebral palsy gait pp. 85-86

O. C. Galarraga, V. Vigneron, N. Khouri, B. Dorizzi and E. Desailly

Influence of the degree of mineralization of the cortical bone on toughness pp. S87-S88

M. Gardegaront, R. Gauthier, D. Farlay, S. Rizzo, D. Mitton and H. Follet

Influence of the degree of mineralization of the cortical bone on toughness pp. 87-88

M. Gardegaront, R. Gauthier, D. Farlay, S. Rizzo, D. Mitton and H. Follet

What’s the best computer mouse? A comparative study of wrist angles and carp extensor activity when using three mice pp. S89-S90

C. Gaudez and F. Cail

What’s the best computer mouse? A comparative study of wrist angles and carp extensor activity when using three mice pp. 89-90

C. Gaudez and F. Cail

Mechanobiological stimuli for bone remodeling: mechanical energy, cell nutriments and mobility pp. 91-92

D. George, R. Allena and Y. Rémond

Mechanobiological stimuli for bone remodeling: mechanical energy, cell nutriments and mobility pp. S91-S92

D. George, R. Allena and Y. Rémond

Scapulohumeral rhythm in young tennis players pp. 93-94

B. Gillet, M. Begon, Y. Blache, C. Berger-Vachon and I. Rogowski

Scapulohumeral rhythm in young tennis players pp. S93-S94

B. Gillet, M. Begon, Y. Blache, C. Berger-Vachon and I. Rogowski

Patient-Specific Biomechanical Modeling of the Lung Tumor for Radiation Therapy pp. S95-S96

M. Giroux, H. Ladjal, M. Beuve, P. Giraud and B. Shariat

Patient-Specific Biomechanical Modeling of the Lung Tumor for Radiation Therapy pp. 95-96

M. Giroux, H. Ladjal, M. Beuve, P. Giraud and B. Shariat

An intravascular ultrasound anisotropic elasticity-palpography technique for in vivo coronary atherosclerotic plaque detection and characterization pp. S97-S98

A. Gomez, A. Tacheau, G. Finet, R. D. Coppel, M. Lagache, J. L. Martiel, S. Le Floc’h, R. I. Pettigrew, G. Cloutier and J. Ohayon

An intravascular ultrasound anisotropic elasticity-palpography technique for coronary atherosclerotic plaque detection and characterization pp. 97-98

A. Gomez, A. Tacheau, G. Finet, R. D. Coppel, M. Lagache, J. L. Martiel, S. Le Floc’h, R. I. Pettigrew, G. Cloutier and J. Ohayon

Is physical activity of children with cerebral palsy correlated with clinical gait analysis or physical examination parameters? pp. S99-S100

Anne-Laure Guinet and Eric Desailly

Is physical activity of children with cerebral palsy correlated with clinical gait analysis or physical examination parameters? pp. 99-100

Anne-Laure Guinet and Eric Desailly

Which mathematical model best fit the maximal isometric torque-angle relationship of the elbow? pp. 101-102

D. Haering, C. Pontonnier and G. Dumont

Which mathematical model best fit the maximal isometric torque-angle relationship of the elbow? pp. S101-S102

D. Haering, C. Pontonnier and G. Dumont

Stress and fatigue analysis of cantilevered bridge during biting: a computer study pp. S103-S104

P. Henyš, M. Ackermann, L. Čapek, T. Drahorád, A. Šimůnek and M. Exnerová

Stress and fatigue analysis of cantilevered bridge during biting: a computer study pp. 103-104

P. Henyš, M. Ackermann, L. Čapek, T. Drahorád, A. Šimůnek and M. Exnerová

Influence of wedge stiffness on biomechanics during heel-strike transient phase pp. 105-106

S. Hessas and M. Behr

Influence of wedge stiffness on biomechanics during heel-strike transient phase pp. S105-S106

S. Hessas and M. Behr

Effects of ellipsoid parameters on scapula motion during manual wheelchair propulsion based on multibody kinematics optimization. A preliminary study pp. 107-108

S. Hybois, A. Lombart, P. Puchaud, J. Bascou, F. Lavaste, H. Pillet and C. Sauret

Effects of ellipsoid parameters on scapula motion during manual wheelchair propulsion based on multibody kinematics optimization. A preliminary study pp. S107-S108

S. Hybois, A. Lombart, P. Puchaud, J. Bascou, F. Lavaste, H. Pillet and C. Sauret

Validation of breast implant finite element model pp. S109-S110

M. Kovar, C. Flynn, J. Sobotka and L. Capek

Validation of breast implant finite element model pp. 109-110

M. Kovar, C. Flynn, J. Sobotka and L. Capek

Evaluation of Calibrated Kinect Gait Kinematics Using a Vicon Motion Capture System pp. 111-112

H. Lamine, S. Bennour, M. Laribi, L. Romdhane and S. Zaghloul

Evaluation of Calibrated Kinect Gait Kinematics Using a Vicon Motion Capture System pp. S111-S112

H. Lamine, S. Bennour, M. Laribi, L. Romdhane and S. Zaghloul

Effect of orthopedic implants on long bone properties: a combined experimental and numerical approach pp. 113-114

C. Laurent, J. Verwaerde, B. Böhme, J.P. Ponthot and M. Balligand

Effect of orthopedic implants on long bone properties: a combined experimental and numerical approach pp. S113-S114

C. Laurent, J. Verwaerde, B. Böhme, J.P. Ponthot and M. Balligand

Evaluation of the effect of an orthoptic exercise through a fencing mask on postural regulation and sporting gesture pp. S115-S116

O. Lefils, W. Bertucci and C. Lefils-Capitain

Evaluation of the effect of an orthoptic exercise through a fencing mask on postural regulation and sporting gesture pp. 115-116

O. Lefils, W. Bertucci and C. Lefils-Capitain

The effect of lateral and medial wedges on control of postural sway pp. S117-S118

C. Lefils-Capitain, W. Bertucci and O. Lefils

The effect of lateral and medial wedges on control of postural sway pp. 117-118

C. Lefils-Capitain, W. Bertucci and O. Lefils

Shape optimization of coronary stents based on Finite Element Analysis pp. S119-S120

N. Lebaal, M. Azaouzi and S. Roth

Shape optimization of coronary stents based on Finite Element Analysis pp. 119-120

N. Lebaal, M. Azaouzi and S. Roth

Evaluation of a scapula spinal marker cluster to track the scapula kinematics during manual wheelchair propulsion pp. 121-122

A. Lombart, A. Siegel, C. Villa, J. Bascou, H. Pillet and C. Sauret

Evaluation of a scapula spinal marker cluster to track the scapula kinematics during manual wheelchair propulsion pp. S121-S122

A. Lombart, A. Siegel, C. Villa, J. Bascou, H. Pillet and C. Sauret

Angular momentum regulation strategies for highly dynamic landing in Parkour pp. S123-S124

G. Maldonado, F. Bailly, P. Soueres and B. Watier

Angular momentum regulation strategies for highly dynamic landing in Parkour pp. 123-124

G. Maldonado, F. Bailly, P. Soueres and B. Watier

Validity of 3D reconstruction of a new tool for postural assessmentbased on a single optical camera pp. S125-S126

T. Marin, N. Houel, A. Brikci and W. Bertucci

Validity of 3D reconstruction of a new tool for postural assessmentbased on a single optical camera pp. 125-126

T. Marin, N. Houel, A. Brikci and W. Bertucci

A thermodynamically consistent model of bone rotary remodeling: a 2D study pp. S127-S128

M. Martin, T. Lemaire, G. Haïat, P. Pivonka and V. Sansalone

A thermodynamically consistent model of bone rotary remodeling: a 2D study pp. 127-128

M. Martin, T. Lemaire, G. Haïat, P. Pivonka and V. Sansalone

3D morphological analyses of subchondral mineralized zone in mice knee joint from HR-μCT scan pp. 129-130

B. Mehadji and J. P. Berteau

3D morphological analyses of subchondral mineralized zone in mice knee joint from HR-μCT scan pp. S129-S130

B. Mehadji and J. P. Berteau

Design optimization and material selection of acetabular component of hip prosthesis using computational concepts pp. S131-S132

A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche and A. Beloulla

Design optimization and material selection of acetabular component of hip prosthesis using computational concepts pp. 131-132

A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche and A. Beloulla

Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method pp. 133-134

A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche and A. Beloulla

Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method pp. S133-S134

A. C. Messellek, M. Ould Ouali, Y. Benabid, A. Amrouche and A. Beloulla

Comparison of Genzling method vs Hamley method allowing a postural adjustment in cycling: preliminary study pp. S135-S136

G. Millour and W. Bertucci

Comparison of Genzling method vs Hamley method allowing a postural adjustment in cycling: preliminary study pp. 135-136

G. Millour and W. Bertucci

Individual contributions of the lower limb muscles to the position of the centre of pressure during gait pp. S137-S138

F. Moissenet and R. Dumas

Individual contributions of the lower limb muscles to the position of the centre of pressure during gait pp. 137-138

F. Moissenet and R. Dumas

Effect of shoe bending stiffness on lower limb kinetics of female recreational runners pp. S139-S140

C. Morio and N. Flores

Effect of shoe bending stiffness on lower limb kinetics of female recreational runners pp. 139-140

C. Morio and N. Flores

Biomechanical and human behavior assessment using virtual reality to challenge balance and posture for the elderly and patients with Parkinson’s disease pp. S141-S142

F. Muhla, F. Clanché, C. Rose, A. Cosson and G. Gauchard

Biomechanical and human behavior assessment using virtual reality to challenge balance and posture for the elderly and patients with Parkinson’s disease pp. 141-142

F. Muhla, F. Clanché, C. Rose, A. Cosson and G. Gauchard

Ground reaction force and impulses of fore and hindlimbs in horses at trot on an asphalt track: effects of an inclined (uphill) compared to a flat surface pp. S143-S144

F. Munoz-Nates, H. Chateau, P. Pourcelot, M. Camus, B. Ravary-Plumioen, J. M. Denoix and N. Crevier-Denoix

Ground reaction force and impulses of fore and hindlimbs in horses at trot on an asphalt track: effects of an inclined (uphill) compared to a flat surface pp. 143-144

F. Munoz-Nates, H. Chateau, P. Pourcelot, M. Camus, B. Ravary-Plumioen, J. M. Denoix and N. Crevier-Denoix

Comparison between Clegg Impact Soil Tester and hoof impact shock measurements on 13 surfaces used for training trotters or sport horses pp. S145-S146

F. Munoz-Nates, P. Pourcelot, A. Van Hamme, J. Martinot, M. Pauchard, M. Nouvel, B. Ravary-Plumioen, H. Chateau and N. Crevier-Denoix

Comparison between Clegg Impact Soil Tester and hoof impact shock measurements on 13 surfaces used for training trotters or sport horses pp. 145-146

F. Munoz-Nates, P. Pourcelot, A. Van Hamme, J. Martinot, M. Pauchard, M. Nouvel, B. Ravary-Plumioen, H. Chateau and N. Crevier-Denoix

Modelling of fascia lata rupture during tensile tests via the discrete element method pp. S147-S148

C. Muth-seng, L. L. Gras, A. Roux and S. Laporte

Modelling of fascia lata rupture during tensile tests via the discrete element method pp. 147-148

C. Muth-seng, L. L. Gras, A. Roux and S. Laporte

Motion analysis of snare drum in relation with the musician’s expertise pp. 149-150

M. Mutio, F. Marandola, K. Ben Mansour, J. André and F. Marin

Movement analysis with inertial sensors: identification of noise covariance matrices to improve body segment orientation using Kalman filtering pp. S151-S152

A. Nez, L. Fradet, T. Monnet and P. Lacouture

Movement analysis with inertial sensors: identification of noise covariance matrices to improve body segment orientation using Kalman filtering pp. 151-152

A. Nez, L. Fradet, T. Monnet and P. Lacouture

Tissue and movement biomechanical characterization of osteoarthritis progression in mouse knee joint pp. S153-S154

L. Olive, S. Gad, M. Fining, L. Thomas and J. P. Berteau

Tissue and movement biomechanical characterization of osteoarthritis progression in mouse knee joint pp. 153-154

L. Olive, S. Gad, M. Fining, L. Thomas and J. P. Berteau

Electromyography of the masticatory muscles during biting pp. 155-156

Kp Owashi Vallejo, E. Sapin - de Brosses and As. Bonnet

Electromyography of the masticatory muscles during biting pp. S155-S156

Kp Owashi Vallejo, E. Sapin - de Brosses and As. Bonnet

Biomechanical analysis of different cross-link configurations spinal instrumentation systems: a preliminary study pp. 157-158

C. Peltier, A. Germaneau, J. C. Dupré, F. Hesser, C. Brèque, P. Rigoard and T. Vendeuvre

Biomechanical analysis of different cross-link configurations spinal instrumentation systems: a preliminary study pp. S157-S158

C. Peltier, A. Germaneau, J. C. Dupré, F. Hesser, C. Brèque, P. Rigoard and T. Vendeuvre

Principal Componant Analysis between perceptions and kinematics of the subject. An ergonomic case study at office work pp. 159-160

A. Picard, M. Mahe, J. M. Barbier, C. Grange, M. Lefebvre, S. Duc, W. Bertucci and N. Houel

Principal Componant Analysis between perceptions and kinematics of the subject. An ergonomic case study at office work pp. S159-S160

A. Picard, M. Mahe, J. M. Barbier, C. Grange, M. Lefebvre, S. Duc, W. Bertucci and N. Houel

Motion adaptation in fencing lunges: a pilot study pp. 161-162

P. Plantard, A. Sorel, N. Bideau and C. Pontonnier

Motion adaptation in fencing lunges: a pilot study pp. S161-S162

P. Plantard, A. Sorel, N. Bideau and C. Pontonnier

Finite element model and ergonomic pertinent choice for stirrup sensors location pp. 163-164

D. Prin-Conti, W. Bertucci and K. Debray

Finite element model and ergonomic pertinent choice for stirrup sensors location pp. S163-S164

D. Prin-Conti, W. Bertucci and K. Debray

Analysis of a horse simulator’s locomotion by inertial sensors pp. 165-166

D. Prin-Conti, A. Simon, W. Bertucci and K. Debray

Analysis of a horse simulator’s locomotion by inertial sensors pp. S165-S166

D. Prin-Conti, A. Simon, W. Bertucci and K. Debray

Infrared thermography applied to the study of the thermal behavior of wheelchair cushion pp. 167-168

H. Pron, R. Taiar, H. T. Bui, P. Lestriez and G. Polidori

Determination of the intervertebral spinal axial rotation in a golf player population: a preliminary study pp. S169-S170

G. Prum, M. Bourgain, C. Sauret, O. Rouillon, P. Rouch and P. Thoreux

Determination of the intervertebral spinal axial rotation in a golf player population: a preliminary study pp. 169-170

G. Prum, M. Bourgain, C. Sauret, O. Rouillon, P. Rouch and P. Thoreux

Tracking the scapula motion through multibody kinematics optimisation to study manual wheelchair propulsion pp. S171-S172

P. Puchaud, S. Hybois, A. Siegel, J. Bascou, H. Pillet and C. Sauret

Tracking the scapula motion through multibody kinematics optimisation to study manual wheelchair propulsion pp. 171-172

P. Puchaud, S. Hybois, A. Siegel, J. Bascou, H. Pillet and C. Sauret

Kinematics of the lumbar muscles in rowing: a preliminary study pp. 173-174

M. Retailleau, M. Domalain, M. Ménard and F. Colloud

Kinematics of the lumbar muscles in rowing: a preliminary study pp. S173-S174

M. Retailleau, M. Domalain, M. Ménard and F. Colloud

Whole body segment inertia parameters estimation from movement and ground reaction forces: a feasibility study pp. S175-S176

T. Robert, P. Leborgne, M. Abid, V. Bonnet, G. Venture and R. Dumas

Whole body segment inertia parameters estimation from movement and ground reaction forces: a feasibility study pp. 175-176

T. Robert, P. Leborgne, Mehdi Abid, V. Bonnet, G. Venture and R. Dumas

Estimation of body segment inertia parameters from 3D body scanner images: a semi-automatic method dedicated to human movement analysis applications pp. S177-S178

T. Robert, P. Leborgne, G. Beurier and R. Dumas

Estimation of body segment inertia parameters from 3D body scanner images: a semi-automatic method dedicated to human movement analysis applications pp. 177-178

T. Robert, P. Leborgne, G. Beurier and R. Dumas

Effects of a new selective compression garment on thermoregulation and muscular oscillations during exercise pp. S179-S180

J. Romain, S. Corona and A. Arfaoui

Effects of a new selective compression garment on thermoregulation and muscular oscillations during exercise pp. 179-180

J. Romain, S. Corona and A. Arfaoui

Sprint acceleration mechanics changes from children to adolescent pp. S181-S182

J. Rossi, R. Slotala, P. Samozino, J. B. Morin and P. Edouard

Sprint acceleration mechanics changes from children to adolescent pp. 181-182

J. Rossi, R. Slotala, P. Samozino, J. B. Morin and P. Edouard

Mechanical characterization of digital collateral nerves: a cadaver study pp. 183-184

S. Salazar Botero, J. D. Elizondo Moreno, F. Séverac, N. Bahlouli, H. Jmal, P. A. Liverneaux and S. Facca

Mechanical characterization of digital collateral nerves: a cadaver study pp. S183-S184

S. Salazar Botero, J. D. Elizondo Moreno, F. Séverac, N. Bahlouli, H. Jmal, P. A. Liverneaux and S. Facca

Comparison of dynamic plantar support after a triple jump competition pp. S185-S186

J. M. Samper and W. Bertucci

Comparison of dynamic plantar support after a triple jump competition pp. 185-186

J. M. Samper and W. Bertucci

Unsteady forces on a hand in swimming in impulsive start configuration pp. S187-S188

M. Samson, A. Bernard, T. Monnet, P. Lacouture and L. David

Unsteady forces on a hand in swimming in impulsive start configuration pp. 187-188

M. Samson, A. Bernard, T. Monnet, P. Lacouture and L. David

Articulated foot improves human likeliness of walking when compared to a flat foot pp. S189-S190

A.P. Santos, F. Benamar, P. Bidaud, V. Padois and E. Desailly

Articulated foot improves human likeliness of walking when compared to a flat foot pp. 189-190

A.P. Santos, F. Benamar, P. Bidaud, V. Padois and E. Desailly

Evaluation of a Passive Model to Mimic Dynamic Head/Neck Movements pp. 191-192

H. Saraç, S. Laporte and B. Sandoz

Evaluation of a Passive Model to Mimic Dynamic Head/Neck Movements pp. S191-S192

H. Saraç, S. Laporte and B. Sandoz

Biomechanical analysis of the trapeziometacarpal arthroplasty failures pp. 193-194

V. Spartacus, A. Mayoly, A. Gay, T. Le Corroller, M. Némoz-Gaillard, S. Roffino and P. Chabrand

Biomechanical analysis of the trapeziometacarpal arthroplasty failures pp. S193-S194

V. Spartacus, A. Mayoly, A. Gay, T. Le Corroller, M. Némoz-Gaillard, S. Roffino and P. Chabrand

Effect of Valve- and Patient- Related Factors on the Effective and Geometric Orifice Areas: An In Vitro Study with the CoreValve pp. 195-196

V. Stanová, As. Zense, R. Rieu, L. Kadem and P. Pibarot

Effect of Valve- and Patient- Related Factors on the Effective and Geometric Orifice Areas: An In Vitro Study with the CoreValve pp. S195-S196

V. Stanová, As. Zenses, R. Rieu, L. Kadem and P. Pibarot

Evaluations of cranial micro-motion and breathing using kinematic analysis. Comparaison between Vicon system and spirometry pp. S197-S198

L. Stubbe, N. Houel, M. Soudain-Pineau, P. Billaudel and F. Cottin

Evaluations of cranial micro-motion and breathing using kinematic analysis. Comparaison between Vicon system and spirometry pp. 197-198

L. Stubbe, N. Houel, M. Soudain-Pineau, P. Billaudel and F. Cottin

Smoothed particle hydrodynamics – based method for penetrating impacts in a biomechanical context pp. 199-200

L. Taddei, H. Frissane, N. Lebaal and S. Roth

Smoothed particle hydrodynamics – based method for penetrating impacts in a biomechanical context pp. S199-S200

L. Taddei, H. Frissane, N. Lebaal and S. Roth

Local elastic properties characterization of the temporo-mandibular joint disc through macro-indentation pp. 201-202

Lk. Tappert, A. Baldit, R. Rahouadj and P. Lipinski

Local elastic properties characterization of the temporo-mandibular joint disc through macro-indentation pp. S201-S202

Lk. Tappert, A. Baldit, R. Rahouadj and P. Lipinski

Preliminary study: IMU system validation for real-time feedback on swimming technique pp. 203-204

X. Tolza, G. Soto-Romero, J. Y. Fourniols and P. Acco

Preliminary study: IMU system validation for real-time feedback on swimming technique pp. S203-S204

X. Tolza, G. Soto-Romero, J. Y. Fourniols and P. Acco

Postural position and architectural foot modifications during Mountain Ultra-Marathon pp. S205-206

S. Vermand, S. Duc, Fj. Ferrari, Pf Varvenne, O. Garcin, A. Ramos, A. Couffort, N. Topsent, V. Trachet, L. Besson, T. Bourgine, T. Mounet, A. Gely, S. Breton and P. Joly

Postural position and architectural foot modifications during Mountain Ultra-Marathon pp. 205-206

S. Vermand, S. Duc, Fj. Ferrari, Pf Varvenne, O. Garcin, A. Ramos, A. Couffort, N. Topsent, V. Trachet, L. Besson, T. Bourgine, T. Mounet, A. Gely, S. Breton and P. Joly

Does the quantitative functional assessment allow to better guide the treatment of the patient with severe hip osteoarthritis? pp. S207-S208

L. Wallard, O. Cornu, J. E. Dubuc, P. Mahaudens, K. I. M’bra, D. Postlethwaite, M. Van Cauter and C. Detrembleur

Does the quantitative functional assessment allow to better guide the treatment of the patient with severe hip osteoarthritis? pp. 207-208

L. Wallard, O. Cornu, J. E. Dubuc, P. Mahaudens, K. I. M’bra, D. Postlethwaite, M. Van Cauter and C. Detrembleur

Volume 20, issue 16, 2017

Probabilistic description of infant head kinematics in abusive head trauma pp. 1633-1642

T. O. Lintern, M. P. Nash, P. Kelly, F. H. Bloomfield, A. J. Taberner and P. M. F. Nielsen

GPGPU-based explicit finite element computations for applications in biomechanics: the performance of material models, element technologies, and hardware generations pp. 1643-1657

V. Strbac, D. M. Pierce, J. Vander Sloten and N. Famaey

Microscale’s relationship between Young’s modulus and tissue density. Prediction of displacements pp. 1658-1668

Łukasz Cyganik, Marcin Binkowski, Grzegorz Kokot, Paulina Cyganik, Tomasz Rusin, Filip Bolechała, Roman Nowak, Zygmunt Wróbel and Antoni John

Intra-rater repeatability of gait parameters in healthy adults during self-paced treadmill-based virtual reality walking pp. 1669-1677

Mohammad Al-Amri, Hilal Al Balushi and Abdulrhman Mashabi

Analysis of breathing via optoelectronic systems: comparison of four methods for computing breathing volumes and thoraco-abdominal motion pattern pp. 1678-1689

Carlo Massaroni, Guglielmo Senesi, Emiliano Schena and Sergio Silvestri

Erratum pp. 1690-1690

The Editors

Volume 20, issue 15, 2017

Mechanical behavior of a total chest wall prosthesis with rib-like features pp. 1581-1588

A. Girotti, F. Rosa, M. Ferrotto, P. Girotti and U. Pastorino

A contact model to simulate human–artifact interaction based on force optimization: implementation and application to the analysis of a training machine pp. 1589-1598

Daniel Krüger and Sandro Wartzack

Numerical study of intrathecal drug delivery to a permeable spinal cord: effect of catheter position and angle pp. 1599-1608

G. Pizzichelli, B. Kehlet, Ø. Evju, B. A. Martin, M. E. Rognes, K. A. Mardal and E. Sinibaldi

Using partial least squares regression as a predictive tool in describing equine third metacarpal bone shape pp. 1609-1612

Helen Liley, Ju Zhang, Elwyn Firth, Justin Fernandez and Thor Besier

The contribution of the glenoid labrum to glenohumeral stability under physiological joint loading using finite element analysis pp. 1613-1622

Christian Klemt, Daniel Nolte, Grigorios Grigoriadis, Erica Di Federico, Peter Reilly and Anthony M. J. Bull

Computer aided design of architecture of degradable tissue engineering scaffolds pp. 1623-1632

M. K. Heljak, K. J. Kurzydlowski and W. Swieszkowski

Volume 20, issue 14, 2017

Micro-mechanical properties of different sites on woodpecker’s skull pp. 1483-1493

Yikun Ni, Lizhen Wang, Xiaoyu Liu, Hongquan Zhang, Chia-Ying Lin and Yubo Fan

Identification of the critical level of implantation of an osseointegrated prosthesis for above-knee amputees pp. 1494-1501

Elder Michael Andrango Castro, Svatava Konvickova, Matej Daniel and Zdenek Horak

The influence of inertial sensor sampling frequency on the accuracy of measurement parameters in rearfoot running pp. 1502-1511

Christian Mitschke, Falk Zaumseil and Thomas L. Milani

The effects of tapering and artery wall stiffness on treatments for Coarctation of the Aorta pp. 1512-1524

Dilan Pathirana, Barbara Johnston and Peter Johnston

Biomechanical consequences of subtalar joint arthroereisis in treating posterior tibial tendon dysfunction: a theoretical analysis using finite element analysis pp. 1525-1532

Duo Wai-Chi Wong, Yan Wang, Tony Lin-Wei Chen, Aaron Kam-Lun Leung and Ming Zhang

Stress analysis of irradiated human tooth enamel using finite element methods pp. 1533-1542

Ganesh Thiagarajan, Bruno Vizcarra, Venkata Bodapudi, Rachel Reed, Rasoul Seyedmahmoud, Yong Wang, Jeffrey P. Gorski and Mary P. Walker

Automated hexahedral meshing of knee cartilage structures – application to data from the osteoarthritis initiative pp. 1543-1553

B. Rodriguez-Vila, P. Sánchez-González, I. Oropesa, E. J. Gomez and D. M. Pierce

Aerodynamic evaluation of the empty nose syndrome by means of computational fluid dynamics pp. 1554-1561

Boris V. Balakin, Erlend Farbu and Pawel Kosinski

and characterization of open-cell structures of trabecular bone pp. 1562-1570

S. J. Ramos-Infante and M. A. Pérez

Multi-body optimization with subject-specific knee models: performance at high knee flexion angles pp. 1571-1579

Caecilia Charbonnier, Sylvain Chagué, Frank C. Kolo, Victoria B. Duthon and Jacques Menetrey

Volume 20, issue 13, 2017

An open-source model and solution method to predict co-contraction in the finger pp. 1373-1381

Alexander R. MacIntosh and Peter J. Keir

Antagonist muscle co-contraction during a double-leg landing maneuver at two heights pp. 1382-1393

Hossein Mokhtarzadeh, Chen Hua Yeow, James Cho Hong Goh, Denny Oetomo, Katie Ewing and Peter Vee Sin Lee

Influence of ground reaction force perturbations on anterior cruciate ligament loading during sidestep cutting pp. 1394-1402

Joshua T. Weinhandl and Kristian M. O’Connor

A musculoskeletal model to estimate the relative changes in wrist strength due to interacting wrist and forearm postures pp. 1403-1411

Nicholas J. La Delfa and Jim R. Potvin

Effectiveness of pedicle screw inclusion at the fracture level in short-segment fixation constructs for the treatment of thoracolumbar burst fractures: a computational biomechanics analysis pp. 1412-1420

Shady Elmasry, Shihab Asfour and Francesco Travascio

Strategies towards rapid generation of forefoot model incorporating realistic geometry of metatarsals encapsulated into lumped soft tissues for personalized finite element analysis pp. 1421-1430

Wen-Ming Chen, Sung-Jae Lee and Peter Vee Sin Lee

Effect of lumbar fasciae on the stability of the lower lumbar spine pp. 1431-1437

Hae Won Choi and Young Eun Kim

Flow visualisation study of spiral flow in the aorta–renal bifurcation pp. 1438-1441

David Fulker, Ashkan Javadzadegan, Zuming Li and Tracie Barber

Validation of plantar pressure simulations using finite and discrete element modelling in healthy and diabetic subjects pp. 1442-1452

W. Aerts, A. Scarton, F. De Groote, A. Guiotto, Z. Sawacha, C. Cobelli, J. Vander Sloten and I. Jonkers

Application of a semi-automatic cartilage segmentation method for biomechanical modeling of the knee joint pp. 1453-1463

Mimmi K. Liukkonen, Mika E. Mononen, Petri Tanska, Simo Saarakkala, Miika T. Nieminen and Rami K. Korhonen

Non-Newtonian flow-induced deformation from pressurized cavities in absorbing porous tissues pp. 1464-1473

Aftab Ahmed, J. I. Siddique and Asif Mahmood

A coordinated control strategy for insulin and glucagon delivery in type 1 diabetes pp. 1474-1482

Pau Herrero, Jorge Bondia, Nick Oliver and Pantelis Georgiou

Volume 20, issue 12, 2017

RGRNA: prediction of RNA secondary structure based on replacement and growth of stems pp. 1261-1272

Jin Li, Chengzhen Xu, Hong Liang, Wang Cong, Ying Wang, Kuan Luan and Yunlong Liu

Validation performance comparison for finite element models of the human brain pp. 1273-1288

Logan E. Miller, Jillian E. Urban and Joel D. Stitzel

A Kinect-based movement assessment system: marker position comparison to Vicon pp. 1289-1298

Julia K. Nichols, Mark P. Sena, Jennifer L. Hu, Oliver M. O’Reilly, Brian T. Feeley and Jeffrey C. Lotz

Protective capacity of an ice hockey goaltender helmet for three events associated with concussion pp. 1299-1311

J. Michio Clark, T. Blaine Hoshizaki and Michael D. Gilchrist

Influence of anisotropic bone properties on the biomechanical behavior of the acetabular cup implant: a multiscale finite element study pp. 1312-1325

Vu-Hieu Nguyen, Giuseppe Rosi, Salah Naili, Adrien Michel, Maria-Letizia Raffa, Romain Bosc, Jean-Paul Meningaud, Christine Chappard, Naoki Takano and Guillaume Haiat

Glottis effects on the cough clearance process simulated with a CFD dynamic mesh and Eulerian wall film model pp. 1326-1338

Concepción Paz, Eduardo Suárez, Oscar Parga and Jesús Vence

Biomechanical comparison of conventional and optimised locking plates for the fixation of intraarticular calcaneal fractures: a finite element analysis pp. 1339-1349

Hanbin Ouyang, Yuping Deng, Pusheng Xie, Yang Yang, Bingyun Jiang, Canjun Zeng and Wenhua Huang

A combination of experimental measurement, constitutive damage model, and diffusion tensor imaging to characterize the mechanical properties of the human brain pp. 1350-1363

Alireza Karimi, Seyed Mohammadali Rahmati and Reza Razaghi

Fatigue failure of the sliding hip screw – clinical and biomechanical analysis pp. 1364-1372

Libor Necas, Maros Hrubina, Zoltan Cibula, Jiri Behounek, Stanislav Krivanek and Zdenek Horak

Volume 20, issue 11, 2017

Prediction of the structural response of the femoral shaft under dynamic loading using subject-specific finite element models pp. 1151-1166

Gwansik Park, Taewung Kim, Jason Forman, Matthew B. Panzer and Jeff R. Crandall

The influence of limb alignment and transfemoral amputation technique on muscle capacity during gait pp. 1167-1174

Ellyn C. Ranz, Jason M. Wilken, Donald A. Gajewski and Richard R. Neptune

Comparison between line and surface mesh models to represent the rotator cuff muscle geometry in musculoskeletal models pp. 1175-1181

Marion Hoffmann, Diane Haering and Mickaël Begon

Small-bubble transport and splitting dynamics in a symmetric bifurcation pp. 1182-1194

Adnan Qamar, Matthew Warnez, Doug T. Valassis, Megan E. Guetzko and Joseph L. Bull

Transport and flow characteristics of an oscillating cylindrical fiber for total artificial lung application pp. 1195-1211

Adnan Qamar and Joseph L. Bull

Mechanical role of a growing solid tumor on cortical folding pp. 1212-1222

Mir Jalil Razavi, Mary Reeves and Xianqiao Wang

Importance of material parameters and strain energy function on the wall stresses in the left ventricle pp. 1223-1232

Sareh Behdadfar, Laurent Navarro, Joakim Sundnes, Molly M. Maleckar and Stéphane Avril

Biomechanical causes of trapeziometacarpal arthroplasty failure pp. 1233-1235

V. Spartacus, A. Mayoly, A. Gay, T. Le Corroller, M. Némoz-Gaillard, S. Roffino and P. Chabrand

Effect of round curvature of anterior implant-supported zirconia frameworks: finite element analysis and study using digital image correlation pp. 1236-1248

Ana Messias, Maria Augusta Neto, Ana Martins Amaro, Pedro Nicolau and Luis Manuel Roseiro

The management of episiotomy technique and its effect on pelvic floor muscles during a malposition childbirth pp. 1249-1259

Dulce A. Oliveira, Marco P. L. Parente, Begoña Calvo, Teresa Mascarenhas and Renato M. Natal Jorge

Volume 20, issue 10, 2017

The effect of boundary conditions on epicardial potential distributions pp. 1031-1037

Josef P. Barnes and Peter R. Johnston

Comparing multiple correspondence and principal component analyses with biomechanical signals. Example with turning the steering wheel pp. 1038-1047

P. Loslever, J. Schiro, F. Gabrielli and P. Pudlo

Wall shear stress and near-wall flows in the stenosed femoral artery pp. 1048-1055

T. Barber

Dynamic model of vascular-targeted photodynamic therapy pp. 1056-1065

Xiao-ming Hu, Linhuan He and Yi Zhao

Statistical factorial analysis approach for parameter calibration on material nonlinearity of intervertebral disc finite element model pp. 1066-1076

Masni-Azian and Masao Tanaka

Estimation of the physiological mechanical conditioning in vascular tissue engineering by a predictive fluid-structure interaction approach pp. 1077-1088

Claudia Tresoldi, Elena Bianchi, Alessandro Filippo Pellegata, Gabriele Dubini and Sara Mantero

The efficacy of a video-based marker-less tracking system for gait analysis pp. 1089-1095

Alex Ong, Ian Sujae Harris and Joseph Hamill

A new formula for predicting the position of severe arterial stenosis pp. 1096-1103

Khaled Ben Abdessalem and Ridha Ben Saleh

Uncertainty propagation of phase contrast-MRI derived inlet boundary conditions in computational hemodynamics models of thoracic aorta pp. 1104-1112

Silvia Bozzi, Umberto Morbiducci, Diego Gallo, Raffaele Ponzini, Giovanna Rizzo, Cristina Bignardi and Giuseppe Passoni

Biomechanical analysis of the Universal 2 implant in total wrist arthroplasty: a finite element study pp. 1113-1121

M. K. Gislason, E. Foster, M. Bransby-Zachary and D. H. Nash

The effect of facial expressions on respirators contact pressures pp. 1122-1131

Mang Cai, Shengnan Shen and Hui Li

The effect of direct and indirect force transmission on peri-implant bone stress – a contact finite element analysis pp. 1132-1139

Annike Rand, Meike Stiesch, Michael Eisenburger and Andreas Greuling

The effect of the sagittal ridge angle on cartilage stress in the equine metacarpo-phalangeal (fetlock) joint pp. 1140-1149

Helen Liley, Helen Davies, Elwyn Firth, Thor Besier and Justin Fernandez

Volume 20, issue 9, 2017

MRI-based finite element modeling of facial mimics: a case study on the paired zygomaticus major muscles pp. 919-928

Ang-Xiao Fan, Stéphanie Dakpé, Tien Tuan Dao, Philippe Pouletaut, Mohamed Rachik and Marie Christine Ho Ba Tho

Modeling and dynamic simulation of astronaut’s upper limb motions considering counter torques generated by the space suit pp. 929-940

Jingwen Li, Qing Ye, Li Ding and Qianfang Liao

1-D blood flow modelling in a running human body pp. 941-948

Viktor Szabó and Gábor Halász

The haemodynamic effect of an adjustable band in an arteriovenous fistula pp. 949-957

M. Sturm, H. Lee, S. Thomas and T. Barber

The human otitis media with effusion: a numerical-based study pp. 958-966

B. Areias, M. P. L. Parente, C. Santos, F. Gentil and R. M. Natal Jorge

Biomechanical evaluation of the natural abutment teeth in combined tooth-implant-supported telescopic prostheses: a three-dimensional finite element analysis pp. 967-979

Yu Chen, Chao Wang, Yuanding Huang, Tianming Feng, Huawei Zou and Yubo Fan

Recirculation zone length in renal artery is affected by flow spirality and renal-to-aorta flow ratio pp. 980-990

Ashkan Javadzadegan, David Fulker and Tracie Barber

A three-dimensional collagen-fiber network model of the extracellular matrix for the simulation of the mechanical behaviors and micro structures pp. 991-1003

Shoubin Dong, Zetao Huang, Liqun Tang, Xiaoyang Zhang, Yongrou Zhang and Yi Jiang

Influences of geometrical and mechanical properties of bone tissues in mandible behaviour – experimental and numerical predictions pp. 1004-1014

A. Ramos, Yi. Nyashin and M. Mesnard

3D characterisation of the dynamics of foot joints of adults during walking. Gait pattern identification pp. 1015-1030

E. Sanchis-Sales, J. L. Sancho-Bru, A. Roda-Sales and J. Pascual-Huerta

Volume 20, issue 8, 2017

The influence of biophysical muscle properties on simulating fast human arm movements pp. 803-821

A. Bayer, S. Schmitt, M. Günther and D. F. B. Haeufle

Computational fluid dynamics in abdominal aorta bifurcation: non-Newtonian versus Newtonian blood flow in a real case study pp. 822-831

Armando A. Soares, Sílvia Gonzaga, Carlos Oliveira, André Simões and Abel I. Rouboa

Computational study of cell adhesion and rolling in flow channel by meshfree method pp. 832-841

Liqiang Lin and Xiaowei Zeng

Biomechanical properties of the pelvic floor muscles of continent and incontinent women using an inverse finite element analysis pp. 842-852

M. E. T. Silva, S. Brandão, M. P. L. Parente, T. Mascarenhas and R. M. Natal Jorge

The incompressibility assumption in computational simulations of nasal airflow pp. 853-868

Ismael R. Cal, Jose Luis Cercos-Pita and Daniel Duque

Structural analysis of two different stent configurations pp. 869-883

M. Simão, J. M. Ferreira, J. Mora-Rodriguez and H. M. Ramos

Conceptual design and implantation of an external fixator with improved mobility for knee rehabilitation pp. 884-892

Gianluca Gatti

Stress distribution in cylindrical and conical implants under rotational micromovement with different boundary conditions and bone properties: 3-D FEA pp. 893-900

Mateus Bertolini Fernandes dos Santos, Gabriel de Oliveira Meloto, Ataís Bacchi and Lourenço Correr-Sobrinho

A simple, reliable method to determine the mean gait speed using heel markers on a treadmill pp. 901-904

Gustavo Souto de Sá e Souza, Fábio Barbosa Rodrigues, Adriano O. Andrade and Marcus Fraga Vieira

Modelling osteoblast adhesion on surface-engineered biomaterials: optimisation of nanophase grain size pp. 905-914

Song Chen, Cheuk Y. Lee, Rachel W. Li, Paul N. Smith and Qing H. Qin

A new adaptive time step method for unsteady flow simulations in a human lung pp. 915-917

Ana Fenández-Tena, Alfonso C. Marcos, Cristina Martínez and D. Keith Walters

Volume 20, issue 7, 2017

A new evolutionary optimization method for osteoporotic bone augmentation pp. 691-700

María E. Santana Artiles and Demetrios T. Venetsanos

The optimal density of cellular solids in axial tension pp. 701-713

L. Angela Mihai, Khulud Alayyash and Hayley Wyatt

Multi-scale analysis of the effect of nano-filler particle diameter on the physical properties of CAD/CAM composite resin blocks pp. 714-719

Satoshi Yamaguchi, Sayuri Inoue, Takahiko Sakai, Tomohiro Abe, Haruaki Kitagawa and Satoshi Imazato

Robustness of kinematic weighting and scaling concepts for musculoskeletal simulation pp. 720-729

Florian Schellenberg, William R. Taylor, Ilse Jonkers and Silvio Lorenzetti

Micromotion-induced peri-prosthetic fluid flow around a cementless femoral stem pp. 730-736

Valérie Malfroy Camine, Alexandre Terrier and Dominique P. Pioletti

Numerical simulation of motion and deformation of healthy and sick red blood cell through a constricted vessel using hybrid lattice Boltzmann-immersed boundary method pp. 737-749

Amir Hassanzadeh, Nader Pourmahmoud and Abdolrahman Dadvand

To reduce the maximum stress and the stress shielding effect around a dental implant–bone interface using radial functionally graded biomaterials pp. 750-759

H. Asgharzadeh Shirazi, M. R. Ayatollahi and A. Asnafi

Two-criteria optimisation problem for ventral hernia repair pp. 760-769

Czesław Szymczak, Izabela Lubowiecka, Katarzyna Szepietowska and Agnieszka Tomaszewska

Finite element analysis of different loading conditions for implant-supported overdentures supported by conventional or mini implants pp. 770-782

K. Solberg, F. Heinemann, P. Pellikaan, L. Keilig, H. Stark, C. Bourauel and I. Hasan

Unsteady computational fluid dynamics in front crawl swimming pp. 783-793

Mathias Samson, Anthony Bernard, Tony Monnet, Patrick Lacouture and Laurent David

A videofluoroscopy-based tracking algorithm for quantifying the time course of human intervertebral displacements pp. 794-802

Christian Balkovec, Jim H. Veldhuis, John W. Baird, G. Wayne Brodland and Stuart M. McGill

Volume 20, issue 6, 2017

Erratum pp. (i)-(i)

The Editors

Virtual anatomical reconstruction of large acetabular bone defects using a statistical shape model pp. 577-586

Peter Vanden Berghe, Jan Demol, Frederik Gelaude and Jos Vander Sloten

Across-subject calibration of an instrumented glove to measure hand movement for clinical purposes pp. 587-597

Verónica Gracia-Ibáñez, Margarita Vergara, James H. Buffi, Wendy M. Murray and Joaquín L. Sancho-Bru

A case for poroelasticity in skeletal muscle finite element analysis: experiment and modeling pp. 598-601

Benjamin B. Wheatley, Gregory M. Odegard, Kenton R. Kaufman and Tammy L. Haut Donahue

A multi-body dynamics study on a weight-drop test of rat brain injury pp. 602-616

Wenyi Yan, Germain Sossou and Ramesh Rajan

New three-dimensional model based on finite element method of bone nanostructure: single TC molecule scale level pp. 617-625

Tesnim Kraiem, Abdelwahed Barkaoui, Moez Chafra, Ridha Hambli and João Manuel R. S. Tavares

Effect of body weight support variation on muscle activities during robot assisted gait: a dynamic simulation study pp. 626-635

Shahid Hussain, Prashant K. Jamwal and Mergen H. Ghayesh

Influence of custom-made implant designs on the biomechanical performance for the case of immediate post-extraction placement in the maxillary esthetic zone: a finite element analysis pp. 636-644

Jianyu Chen, Zhiguang Zhang, Xianshuai Chen and Xiao Zhang

Hydrodynamic analysis of human swimming based on VOF method pp. 645-652

Jie-min Zhan, Tian-zeng Li, Xue-bin Chen and Y.S. Li

Finite element analyses for improved design of peripheral stents pp. 653-662

Yong-Hyun Lim and Hyun-Yong Jeong

Finite element analysis of implant-supported prosthesis with pontic and cantilever in the posterior maxilla pp. 663-670

Victor Eduardo de Souza Batista, Fellippo Ramos Verri, Daniel Augusto de Faria Almeida, Joel Ferreira Santiago Junior, Cleidiel Aparecido Araújo Lemos and Eduardo Piza Pellizzer

Computational fluid dynamics study of common stent models inside idealised curved coronary arteries pp. 671-681

Winson X. Chen, Eric K. W. Poon, Nicholas Hutchins, Vikas Thondapu, Peter Barlis and Andrew Ooi

Bioimpedancemetry for the assessment of periodontal tissue inflammation: a numerical feasibility study pp. 682-690

Gloria Cosoli, Lorenzo Scalise, Graziano Cerri, Paola Russo, Gerardo Tricarico and Enrico Primo Tomasini

Volume 20, issue 5, 2017

Sustained high-pressure in the spinal subarachnoid space while arterial expansion is low may be linked to syrinx development pp. 457-467

Elizabeth C. Clarke, David F. Fletcher and Lynne E. Bilston

Aortic valve leaflet wall shear stress characterization revisited: impact of coronary flow pp. 468-470

K. Cao and P. Sucosky

Blood flow in the cerebral venous system: modeling and simulation pp. 471-482

Olivia Miraucourt, Stéphanie Salmon, Marcela Szopos and Marc Thiriet

On the importance of 3D, geometrically accurate, and subject-specific finite element analysis for evaluation of in-vivo soft tissue loads pp. 483-491

Kevin M. Moerman, Marc van Vijven, Leandro R. Solis, Eline E. van Haaften, Arjan C. Y. Loenen, Vivian K. Mushahwar and Cees W. J. Oomens

Two-dimensional intraventricular flow pattern visualization using the image-based computational fluid dynamics pp. 492-507

Siamak N. Doost, Liang Zhong, Boyang Su and Yosry S. Morsi

A model of neurovascular coupling and the BOLD response: PART I pp. 508-518

E. J. Mathias, M. J. Plank and T. David

A model of neurovascular coupling and the BOLD response PART II pp. 519-529

E. J. Mathias, M. J. Plank and T. David

On the assessment of bridging vein rupture associated acute subdural hematoma through finite element analysis pp. 530-539

Zhao Ying Cui, Nele Famaey, Bart Depreitere, Jan Ivens, Svein Kleiven and Jos Vander Sloten

Real-time simulation of hand motion for prosthesis control pp. 540-549

Dimitra Blana, Edward K. Chadwick, Antonie J. van den Bogert and Wendy M. Murray

Sensitivity of lumbar spine response to follower load and flexion moment: finite element study pp. 550-557

Sadegh Naserkhaki and Marwan El-Rich

Loading of the lumbar spine during backpack carriage pp. 558-565

Patrick D. Wettenschwiler, Silvio Lorenzetti, Stephen J. Ferguson, Rolf Stämpfli, Ameet K. Aiyangar, René M. Rossi and Simon Annaheim

Accuracy of femur reconstruction from sparse geometric data using a statistical shape model pp. 566-576

Ju Zhang and Thor F. Besier

Volume 20, issue 4, 2017

The twist-to-bend compliance of the petiole: integrated computations and experiments pp. 343-354

Tanvir R. Faisal, Nicolay Hristozov, Tamara L. Western, Alejandro Rey and Damiano Pasini

Development of an integrated CAD–FEA system for patient-specific design of spinal cages pp. 355-364

Mingzheng Zhang, Fang Pu, Liqiang Xu, Linlin Zhang, Hang Liang, Deyu Li, Yu Wang and Yubo Fan

Influence of stenosis on hemodynamic parameters in the realistic left coronary artery under hyperemic conditions pp. 365-372

Sarfaraz Kamangar, Irfan Anjum Badruddin, A. Badarudin, N. Nik-Ghazali, Kalimuthu Govindaraju, N. J. Salman Ahmed and T. M. Yunus Khan

A novel approach for extracting viscoelastic parameters of living cells through combination of inverse finite element simulation and Atomic Force Microscopy pp. 373-384

Fanan Wei, Haitao Yang, Lianqing Liu and Guangyong Li

The use of XFEM to assess the influence of intra-cortical porosity on crack propagation pp. 385-392

Naiara Rodriguez-Florez, Alessandra Carriero and Sandra J. Shefelbine

A comparison of the peri-implant bone stress generated by the preload with screw tightening between ‘bonded’ and ‘contact’ model pp. 393-402

Maki Matsuzaki, Yasunori Ayukawa, Nobuo Sakai, Tatsuya Matsuzaki, Yasuyuki Matsushita and Kiyoshi Koyano

A new formulation of slight compressibility for arterial tissue and its Finite Element implementation pp. 403-414

M. D. Gilchrist, D. MacManus, J. G. Murphy and B. Pierrat

Predicting changes in mechanical properties of trabecular bone by adaptive remodeling pp. 415-425

Daisuke Tawara and Ken Nagura

Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model pp. 426-435

Ralf Gutwald, Raimund Jaeger and Floor M. Lambers

Real-time inverse kinematics and inverse dynamics for lower limb applications using OpenSim pp. 436-445

C. Pizzolato, M. Reggiani, L. Modenese and D. G. Lloyd

An inverse problem in estimating the laser irradiance and thermal damage in laser-irradiated biological tissue with a dual-phase-lag model pp. 446-456

Yu-Ching Yang, Haw-Long Lee, Win-Jin Chang and Wen-Lih Chen

Volume 20, issue 3, 2017

Predicting permeability of regular tissue engineering scaffolds: scaling analysis of pore architecture, scaffold length, and fluid flow rate effects pp. 231-241

A. Rahbari, H. Montazerian, E. Davoodi and S. Homayoonfar

Comparison of physiological and post-endovascular aneurysm repair infrarenal blood flow pp. 242-249

Anastasios Raptis, Michalis Xenos, Efstratios Georgakarakos, George Kouvelos, Athanasios Giannoukas, Nicos Labropoulos and Miltiadis Matsagkas

The influence of cartilage surface topography on fluid flow in the intra-articular gap pp. 250-259

Yabin Wu and Stephen J. Ferguson

Haemodynamic assessment of human coronary arteries is affected by degree of freedom of artery movement pp. 260-272

Ashkan Javadzadegan, Andy S. C. Yong, Michael Chang, Martin K. C. Ng, Masud Behnia and Leonard Kritharides

A model of muscle contraction based on the Langevin equation with actomyosin potentials pp. 273-283

Youjiro Tamura, Akira Ito and Masami Saito

Biomechanical comparison of sinus floor elevation and alternative treatment methods for dental implant placement pp. 284-293

Sercan Küçükkurt, Gökhan Alpaslan and Ahmet Kurt

Finite element prediction of contact pressures in cam-type femoroacetabular impingement with varied alpha angles pp. 294-301

Qian Liu, Wanchun Wang, Andrew R. Thoreson, Chunfeng Zhao, Weihong Zhu and Pengcheng Dou

Accommodation of the human lens capsule using a finite element model based on nonlinear regionally anisotropic biomembranes pp. 302-307

G. David, R. M. Pedrigi and J. D. Humphrey

Transient pressure wave in the behind armor blunt trauma: experimental and computational investigation pp. 308-318

Shaomin Luo, Cheng Xu, Shu Wang and Yaoke Wen

A poroelastic finite element model of the bone–cartilage unit to determine the effects of changes in permeability with osteoarthritis pp. 319-331

Michael E. Stender, Richard A. Regueiro and Virginia L. Ferguson

A lateral dynamics of a wheelchair: identification and analysis of tire parameters pp. 332-341

L. C. A. Silva, F. C. Corrêa, J. J. Eckert, F. M. Santiciolli and F. G. Dedini

Corrigendum pp. 342-342

The Editors

Volume 20, issue 2, 2017

Muscle wrapping on arbitrary meshes with the heat method pp. 119-129

Omar Zarifi and Ian Stavness

The effects of gastrocnemius–soleus muscle forces on ankle biomechanics during triple arthrodesis pp. 130-141

S. Hejazi, G. Rouhi and J. Rasmussen

CFD transient simulation of the cough clearance process using an Eulerian wall film model pp. 142-152

Concepción Paz, Eduardo Suárez and Jesús Vence

Extended foot-ankle musculoskeletal models for application in movement analysis pp. 153-159

Tiago M. Malaquias, Carolina Silveira, Wouter Aerts, Friedl De Groote, Greta Dereymaeker, Jos Vander Sloten and Ilse Jonkers

Fast blood-flow simulation for large arterial trees containing thousands of vessels pp. 160-170

Alexandre Muller, Richard Clarke and Harvey Ho

Computational comparison of aortic root stresses in presence of stentless and stented aortic valve bio-prostheses pp. 171-181

M. G. C. Nestola, E. Faggiano, C. Vergara, R. M. Lancellotti, S. Ippolito, C. Antona, S. Filippi, A. Quarteroni and R. Scrofani

Effect of screw position on load transfer in lumbar pedicle screws: a non-idealized finite element analysis pp. 182-192

Anna G. U. S. Newcomb, Seungwon Baek, Brian P. Kelly and Neil R. Crawford

Influence of bicortical techniques in internal connection placed in premaxillary area by 3D finite element analysis pp. 193-200

Fellippo Ramos Verri, Ronaldo Silva Cruz, Cleidiel Aparecido Araújo Lemos, Victor Eduardo de Souza Batista, Daniel Augusto Faria Almeida, Ana Caroline Gonçales Verri and Eduardo Piza Pellizzer

Variation in the human Achilles tendon moment arm during walking pp. 201-205

Kristen Rasske, Darryl G. Thelen and Jason R. Franz

Image-guided simulation of tissue deformation using a mechanical model on a surgical application pp. 206-214

Toan B. Nguyen, Albert Y. Huang, Vid Fikfak, Brian J. Dunkin and Marc Garbey

A novel micro-to-macro approach for cardiac tissue mechanics pp. 215-229

Seyyed M. H. Haddad and Abbas Samani

Corrigendum pp. 230-230

The Editors

Volume 20, issue 1, 2017

Lumbar spine finite element model for healthy subjects: development and validation pp. 1-15

Ming Xu, James Yang, Isador H. Lieberman and Ram Haddas

CFD modeling of the underwash effect of military helmets as a possible mechanism for blast-induced traumatic brain injury pp. 16-26

Hesam Sarvghad-Moghaddam, Asghar Rezaei, Mariusz Ziejewski and Ghodrat Karami

Computational geometry assessment for morphometric analysis of the mandible pp. 27-34

Stefan Raith, Viktoria Varga, Timm Steiner, Frank Hölzle and Horst Fischer

Estimation of conditions evoking fracture in finger bones under pinch loading based on finite element analysis pp. 35-44

Jonas A. Pramudita, Seiji Kamiya, Sadayuki Ujihashi, Hyung-Yun Choi, Masato Ito, Ryoji Watanabe, Jeff R. Crandall and Richard W. Kent

Numerical technique of blood flow through catheterized arteries with overlapping stenosis pp. 45-58

M. A. El Kot and W. Abbas

Computational model of mesenchymal migration in 3D under chemotaxis pp. 59-74

F. O. Ribeiro, M. J. Gómez-Benito, J. Folgado, P. R. Fernandes and J. M. García-Aznar

Strain gradient development in 3-dimensional extracellular matrix scaffolds during mechanical stimulation pp. 75-84

Benjamin J. Seifer and Christopher T. Wagner

Sequential venous anastomosis design to enhance patency of arterio-venous grafts for hemodialysis pp. 85-93

Foad Kabinejadian, Boyang Su, Dhanjoo N. Ghista, Munirah Ismail, Sangho Kim and Hwa Liang Leo

Can generic knee joint models improve the measurement of osteoarthritic knee kinematics during squatting activity? pp. 94-103

Julien Clément, Raphaël Dumas, Nicola Hagemeister and Jaques A. de Guise

Finite element modeling for predicting the contact pressure between a foam mattress and the human body in a supine position pp. 104-117

Wookjin Lee, Byeong Hee Won and Seong Wook Cho