Computer Methods in Biomechanics and Biomedical Engineering

2008 - 2025

Current editor(s): Director of Biomaterials John Middleton

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 16, issue S1, 2013

Editorial pp. 1-1

Patrick Chabrand

Divided media-based simulations of tissue morphogenesis pp. 2-3

Y. Chélin, J. Averseng, P. Cañadas and B. Maurin

Off-plane motion of an oblate capsule in a simple shear flow pp. 4-5

C. Dupont, F. Delahaye, A.-V. Salsac and D. Barthès-Biesel

Hydrodynamic interactions among large populations of swimming micro-organisms pp. 6-8

B. Delmotte, E. Climent and F. Plouraboué

Towards numerical prediction of red blood cells dynamics within a cytometer pp. 9-10

E. Gibaud, J. Siguenza, S. Mendez and F. Nicoud

Collective motility of sperm in confined cells pp. 11-12

A. Creppy, F. Plouraboué, O. Praud and A. Viel

A mechanical model for cell motility and tissue morphogenesis pp. 13-14

S. Jauvert, R. Peyroux and V. Richefeu

Microrheology of complex systems and living cells using AFM pp. 15-16

Y. Abidine, V.M. Laurent, R. Michel, A. Duperray and C. Verdier

Treatment of a stenosed arteriovenous fistula by balloon angioplasty with or without stenting: comparison of effects on haemodynamics pp. 17-18

A.-V. Salsac, I. Decorato, Z. Kharboutly and C. Legallais

Coupled fluid flow and ion transport through intact skin pp. 19-21

M.-A. Abellan, E. Feulvarch, J.-M. Bergheau and H. Zahouani

Micromechanical modelling of the arterial wall: influence of mechanical heterogeneities on the wall stress distribution and the peak wall stress pp. 22-24

M. Toungara, L. Orgéas, C. Geindreau and L. Bailly

Effect of viscoelasticity of arterial wall on pulse wave: a comparative study on ovine pp. 25-26

X.-F. Wanga, J.-M. Fullana, P.-Y. Lagrée and R.L. Armentano

Wall shear stress and endothelial cells dysfunction in the context of abdominal aortic aneurysms pp. 27-29

Z. Macek Jilkova, V. Deplano, C. Verdier, M. Toungara, C. Geindreau and A. Duperray

Mitral bileaflet mechanical heart valves dysfunction and patient/prosthesis mismatch: investigation of differential diagnosis pp. 30-32

M. Evin, C. Guivier-Curien, A.S. Zenses and R. Rieu

Flow of concentrated red blood cell suspensions at micro-bifurcations: an experimental study pp. 33-35

S. Roman, S. Lorthois, P. Duru and F. Risso

Numerical simulation of the migration phenomena and type 1a endoleak of thoracic aneurysm endograft pp. 36-38

H.-E. Altnji, B. Bou-Said and H. Walter-Le Berre

Strength balance and low back pain pp. 39-40

J.P. Meyer and D. Flenghi

Hand orientation while steering pp. 41-43

F. Gabrielli, J. Schiro, P. Pudlo and A. Thevenon

When motor simulation of disequilibrium increases postural stability pp. 44-45

L.P. Heurley, E.M. Simoneau, S. Leteneur and D. Brouillet

Age-related effects of temporal pressure on the postural organisation of rapid leg flexion pp. 46-47

T. Hussein, E. Yiou and J. LaRue

Preliminary study of rider back biomechanics pp. 48-49

S. Biau, C.H. Gilbert, J. Gouz, C.H. Roquet, J. Fabis and B. Leporcq

Numerical simulation of breast deformation under static conditions pp. 50-51

M. Zain-Ul-Abdein, F. Morestin, L. Bouten and J. Cornolo

Vibration transmissibility in different body positions with various vibration frequencies in a vertical vibration platform pp. 52-53

Y. El Aji, S. Crequy, X. Chiementin and W. Bertucci

Determination of human body segment inertial parameters using a fringe projection method pp. 54-56

I. Leandry, C. Breque and V. Valle

A new ilio-femoro-tibial range of motion (IFT-ROM) test: reproducibility and effect of a passive stretching programme pp. 57-58

R. Dolin and M. Geronimi

A numerical approach to assess the soft tissue artefact during human movement analysis pp. 59-60

A. Thouzé, T. Monnet, P. Lacouture and M. Begon

Global sensitivity analysis of the kinematics obtained with a multi-body optimisation using a parallel mechanism of the shoulder pp. 61-62

A. El Habachi, S. Duprey, L. Chèze and R. Dumas

An SVD approach to reaching tasks based on Cartesian geodesics pp. 63-65

A. Datas, P. Chiron and J.-Y. Fourquet

Is there a predominant influence between heel height, upper height and sole stiffness on young children gait dynamics? pp. 66-67

A. Van Hamme, W. Samson, B. Dohin, R. Dumas and L. Chèze

Accelerometric signal during gait: cut-off frequency as a function of movement speed and sensor location pp. 68-69

K. Ben Mansour, N. Rezzoug and P. Gorce

Rotation axes in overarm throwing pp. 70-71

C. Hansen, N. Rezzoug, P. Gorce, G. Venture and B. Isableu

Contact force computation based on BSIPs pp. 72-74

C. Hansen, N. Rezzoug, P. Gorce, B. Isableu and G. Venture

Joint intra-individual variability simulation based on UCM hypothesis pp. 75-77

N. Rezzoug, J. Jacquier-Bret and P. Gorce

What about running on Mars? Dynamical response to unweighing of the running pattern pp. 78-79

P. Sainton, C. Pelletier, C. Nicol and P. Chavet

Multifactorial gait analysis of children with flat foot and hind foot valgus deformity pp. 80-81

C. Pothrat, G. Authier, E. Viehweger and G. Rao

Eccentric rate of force development determines jumping performance pp. 82-83

G. Laffaye and P. Wagner

Validity of an accelerometric system for measuring force–time-based data during jumping tasks pp. 84-85

M.A. Choukou, G. Laffaye and R. Taiar

Mechanical equivalent model of vibration transmission in cycling pp. 86-87

M. Munera, X. Chiementin and W. Bertucci

Experimental protocol for the risk assessment in cycling pp. 88-89

S. Crequy, X. Chiementin and W. Bertucci

Biomechanical analysis of the strike motion in ice-climbing activity pp. 90-92

T. Robert, A. Rouard and L. Seifert

Fatigue evaluation on pilots during a 24-hour karting race using a postural force platform pp. 93-94

M. Ripamonti, S. Durand, A. Rahmani and B. Beaune

How to reconstruct athlete movement during outdoor rowing? A pilot study pp. 95-96

V. Fohanno, P.J. Sinclair, R. Smith and F. Colloud

The effect of shoe drop on running pattern pp. 97-98

N. Chambon, N. Delattre, E. Berton, N. Guéguen and G. Rao

Influence of racket polar moment on joint loads during tennis forehand drive pp. 99-101

T. Creveaux, R. Dumas, L. Chèze, P. Macé and I. Rogowski

Influence of hand-held racket on scapulothoracic kinematics during humeral elevation in the scapular plane in young tennis players: a preliminary study pp. 102-103

V. Sevrez, G. Dolange, L. Pinloche, R. Dumas, T. Creveaux and I. Rogowski

Effect of time during a running session with minimal footwear pp. 104-105

N. Delattre, N. Chambon, E. Berton, N. Gueguen and G. Rao

Muscle force strategies in relation to saddle setback management in cycling pp. 106-108

C. Hayot, M. Domalain, J. Bernard, A. Decatoire and P. Lacouture

Finite helical axis versus symmetrical axis of rotation approach for the human knee joint: squats, rowing and cycling pp. 109-111

I. Reichl and M. Ongaro

Is handgrip force changed following a 45-min kart driving session in competition? pp. 112-113

S. Durand, M. Ripamonti, A. Rahmani and B. Beaune

Relationship between the gross efficiency and muscular skin temperature of lower limb in cycling: a preliminary study pp. 114-115

W. Bertucci, A. Arfaoui, L. Janson and G. Polidori

Evaluation of wheelchair user's upper limb kinematics during throwing activities: a preliminary study pp. 116-117

N. Louis and P. Gorce

Comparison of steering forces of healthy versus disabled drivers under simulation condition pp. 118-120

J. Schiro, F. Gabrielli, P. Pudlo, F. Barbier and M. Djemai

Chronology of postural and focal component of muscular activity during manual wheelchair propulsion initiation: effect of different trajectories and velocities pp. 121-123

S. Chikh, M.-A. Dupuy, C. Garnier, E. Watelain, E. Simoneau and P. Pudlo

Handrim mechanical power during wheelchair propulsion on level and cross-slope surfaces: a preliminary study pp. 124-125

C. Sauret, V. Faye, J. Bascou, H. Pillet and F. Lavaste

Vaulting quantification for transfemoral amputees in different gait situations pp. 126-127

X. Drevelle, C. Villa, C. Sauret, P. Fode, N. Martinet, H. Pillet and F. Lavaste

A brain and gaze-controlled wheelchair pp. 128-129

Hachem A. Lamti, Mohamed Moncef Ben Khelifa, Ph. Gorce and Adel M. Alimi

Proposal of an index for evaluating pitch instability during actual locomotion with a manual wheelchair pp. 130-131

C. Sauret, P. Vaslin, J. Bascou, H. Pillet and F. Lavaste

Impact of the subject and wheelchair properties during slope ascent in manual wheelchair: a theoretical study pp. 132-133

J. Bascou, A. Saade, H. Pillet, F. Lavaste and C. Sauret

Mechanical energy expenditure of subject with multiple sclerosis engaged in daily activities: a case study pp. 134-135

V. Serrau, F. Ayachi, L. Fradet, F. Marin, V. Leclercq, C. Dupuis-Ansellin, S. Ahmaidi, T. Weissland and P-M. Leprêtre

3D accelerometric gait analysis in dogs using smartphone pp. 136-138

P. Pillard, F.X. Ferrand and E. Viguier

Estimation of longitudinal hoof slip displacement at the canter on two different track surfaces using accelerometric and kinematic methods: a preliminary comparative study with one horse pp. 139-141

J. Martino, P. Pourcelot, S. Falala, M. Camus, L. Holden-Douilly, H. Chateau and N. Crevier-Denoix

Comparison of the moment at the distal interphalangeal joint on asphalt and on sand in horses at trot pp. 142-144

M. Camus, P. Pourcelot, S. Falala, B. Ravary-Plumioen, M. Poupot, J.-M. Denoix, H. Chateau and N. Crevier-Denoix

External loads on the leading and trailing forelimbs of a jumping horse at landing measured with a dynamometric horseshoe pp. 145-146

N. Crevier-Denoix, M. Camus, S. Falala, B. Ravary-Plumioen, L. Douilly-Holden, D. Robin, J.-M. Denoix, H. Chateau and P. Pourcelot

Multi-modal framework for subject-specific finite element model generation aimed at pressure ulcer prevention pp. 147-148

M. Bucki, Y. Payan, F. Cannard, B. Diot and N. Vuillerme

Dynamic biomechanical modelling for foot ulcer prevention pp. 149-151

V. Luboz, A. Perrier, M. Bucki, F. Cannard, B. Diot, N. Vuillerme and Y. Payan

EMG-based validation of musculo-skeletal models for gait analysis pp. 152-154

M. Giroux, F. Moissenet and R. Dumas

Musculoskeletal modelling of cerebral palsy children: sensitivity analysis of musculoskeletal model parameter's values for gait analysis pp. 155-157

T. Rezgui, F. Megrot and F. Marin

Gastrocnemius medialis fascicle and Achilles' tendon behaviour during a quick-release movement pp. 158-160

S. Farcy, A. Nordez, S. Dorel, H. Hauraix, P. Portero and G. Rabita

Relationships between hip muscles and trunk flexor and extensor muscles in chronic low back pain patients: a preliminary study pp. 161-163

A. Lemaire, M. Ripamonti, M. Ritz and A. Rahmani

Effect of the muscle activation level distribution on normal stress field: a numerical study pp. 164-166

J. Stelletta, R. Dumas and Y. Lafon

Validation of optimisation model that estimates the musculotendinous forces during an isometric extension of knee pp. 167-169

S. Bennour, N. Zarrouk, M. Dogui, L. Romdhane and J.-P. Merlet

Evaluation of neck muscles activation patterns during simple isometric tasks pp. 170-171

P. Lamouri and B. Fréchède

Comparison between model-based and measured force polytopes: towards isometric force capacity evaluation pp. 172-174

N. Rezzoug, V. Hernandez, J. Jacquier-Bret and P. Gorce

Using the humanoid robotics framework for testing different plausible control architectures of human reaching movements pp. 175-176

M. Taïx and P. Souères

An advanced robotics motion generation framework for inferring the organisation of human movements pp. 177-178

O.E. Ramos, N. Mansard, O. Stasse and P. Souères

Using a motion capture system to identify pertinent design parameters of a bio-inspired mechanical hand pp. 179-181

J.A. Rojas Quintero, P. Seguin, J.P. Gazeau and M. Arsicault

The PROMIS model to highlight the importance of the foetus to the validation of a pregnant woman model pp. 182-183

F. Auriault, L. Thollon, J. Peres, J. Delotte, K. Kayvantash, C. Brunet and M. Behr

Analysis of train driver protection in rail collisions pp. 184-186

A. Hault-Dubrulle, H. Morvan, F. Robache, P. Drazetic, C. Landsheere and O. Luc

Evaluation of wrist guard effectiveness for snowboarders pp. 187-188

C. Thoraval, A. Hault-Dubrulle, P. Drazetic, H. Morvan and C. Barla

Influence of loading speed on the mechanical properties of the colon pp. 189-190

D. Massalou, T. Bège, C. Masson, S. Bourgouin, P. Foti, P.-J. Arnoux, P. Baqué, C. Brunet and S.-V. Berdah

Relationship between human rib mechanical properties and cortical bone density measured by high-resolution quantitative computed tomography pp. 191-192

Y. Zhu, Y. Fang, F. Bermond, K. Bruyère-Garnier, R. Ellouz, F. Rongieras and D. Mitton

Parametric finite element modelling of the human lower cervical spinal cord pp. 193-194

R. Toubiana Meyer, B. Sandoz, A. Laville and S. Laporte

Hip joint centre location from anatomical landmarks for automotive seated posture reconstruction pp. 195-197

J. Peng, X. Wang, L. Denninger, J. Panda and S. Van Sint Jan

Finite element head model simulation and head injury prediction pp. 198-199

D. Sahoo, C. Deck and R. Willinger

Internal kidney's behaviour during compressive loading using ultrafast echography pp. 200-201

C. Helfenstein, J.-L. Gennisson, M. Tanter and P. Beillas

A new method to assess the deformations of internal organs of the abdomen during impact pp. 202-203

P. Beillas, C. Helfenstein, F. Rongieras, J.-L. Gennisson and M. Tanter

Kinematic and dynamic responses of the scrum pp. 204-205

D. Saletti, G. Chicoulaa, M. Raszoudowsky, X. Drevelle, J. Piscione, D. Retière and S. Laporte

Anisotropy and strain rate effects on bovine cortical bone: combination of high-resolution imaging and dynamic loading pp. 206-208

O. Mayeur, G. Haugou and F. Chaari

Original experimental ballistic set-up for mechanical behaviour characterisation of the cranial bone pp. 209-210

C. Marechal, M. Karkar, R. Delille, G. Haugou, F. Bresson and T. Colard

Multiscale modelling of the mechanical behaviour of human humerus under impact pp. 211-213

F. Vandenbulcke, J. Rahmoun, H. Naceur, H. Morvan, P. Drazetic and C. Fontaine

3D freehand ultrasound to estimate the glenohumeral rotation centre pp. 214-215

M. Lempereur, L. Kostur, J. Leboucher, S. Brochard and O. Rémy-Néris

Structural and tribological study of healthy and biomimetic SF pp. 216-218

M.-M. Sava, C. Boulocher, C.I. Matei, B. Munteanu, M. Schramme, E. Viguier, T. Roger, Y. Berthier, M.-G. Blanchin and A.-M. Trunfio-Sfarghiu

Biomechanical analysis and modelling of lumbar belt: preliminary study pp. 219-221

R. Bonnaire, J. Molimard, P. Calmels and R. Convert

The effect of nucleotomy on facet joint loading in the porcine lumbar spine pp. 222-223

M.F. Ivicsics, N.E. Bishop, K. Sellenschloh, J.-Ph. Berteau, M.M. Morlock and G. Huber

Necessary precision levels for the subchondral mineralised zone thickness of the facet joint to optimise finite-element model pp. 224-225

M. Höfemann, J.-Ph. Berteau, Y.T. Lu, M.M. Morlock and G. Huber

characterisation of the biomechanical properties of the subchondral mineralised zone of lumbosacral facet joints pp. 226-227

J.-Ph. Berteau, L. Nover, G. Mielke, M. Ivicsics, M.M. Morlock and G. Huber

Reliable femoral frame construction on MRI images pp. 228-230

G. Dubois, N. Roux, D. Bonneau, V. Lafage, P. Rouch and W. Skalli

Method to determine bones' relative displacement using a CT scan: application to the scaphoid and lunate bones pp. 231-233

L. Rossi, J. Mailhé, J.M. Linares, P. Houvet and P. Le Hir

Dissecan osteochondritis of the elbow: a possible explanation with a numerical study pp. 234-235

J.M. Crolet, S. Acciardo, M. Racila and B. de Billy

3D dynamic numerical simulations of intervertebral disc: bending and twisting pp. 236-238

M. Etienne, V. Deplano, O. Boiron and P. Tropiano

Numerical modelling of a new flexible spinal implant to control scoliosis aggravation. First set-up of a parametric study pp. 239-241

S. Le Cann, J.M. Rossi, S. Mesure, L. Miladi, T. Waquet and P. Chabrand

Evaluation of a primary TMJ implant fixation using screws: a numerical study pp. 242-243

R.J. Duarte, A. Ramos and M. Mesnard

Experimental analysis of biomechanical behaviour of stabilised occipitocervical junctions pp. 244-245

A. Germaneau, S. D'Houtaud, A. Delmotte, P. Doumalin, J.-C. Dupré, F. Brémand, F. Hesser, C. Brèque and P. Rigoard

Biomechanical analysis of pedicle screw pullout strength pp. 246-248

R.-J. Bianco, P.-J. Arnoux, J.-M. Mac-Thiong, E. Wagnac and C.-E. Aubin

Development and validation of a numerical model for tibial component analysis in total ankle replacement pp. 249-250

A. Terrier, X. Larrea, J. Guerdat and X. Crevoisier

Simulation of bone ingrowth in non-resorbable substitutes pp. 251-252

J.M. Crolet, S. Acciardo and M. Racila

Silk nerve: bioactive implant for peripheral nerve regeneration pp. 253-254

T. Dinis, G. Vidal, F. Marin, D. Kaplan and C. Eglès

Effects of thermal ageing on the static and cyclic mechanical properties of carbon fibres/PDMS composites for use in medicine pp. 255-257

T. Suchý, R. Sedláček, Z. Sucharda, K. Balík and T. Bouda

The importance of the geometry of the screws in TMJ implant fixation pp. 258-259

A. Ramos, C. Relvas, A. Completo, J.A. Simões and M. Mesnard

Second-gradient models accounting for some effects of microstructure on remodelling of bones reconstructed with bioresorbable materials pp. 260-261

A. Madeo, D. George and Y. Rémond

Comparison between constitutive models for the solid phase of biphasic agarose/chondrocytes constructs for knee cartilage engineering pp. 262-263

C. Bandeiras and A. Completo

Effect of ions on the interactions of glass nanoparticles with monolayer lung surfactant: applications for the study of inhaled airborne wear particles pp. 264-265

B. Munteanu, Y. Berthier, J.-P. Rieu and A.-M. Trunfio Sfarghiu

Diffusion–reaction model to describe osteogenesis within a titanium scaffold pp. 266-267

M. Schmitt, P. Rouch, Y. Tillier, T. Schouman and R. Allena

A simple model for the perfusion of porous hydrogel scaffolds under culture in a sustentation like bioreactor pp. 268-269

Y. Knapp, V. Deplano and E. Bertrand

Subject-specific finite element modelling of canine long bones up to fracture pp. 270-271

C. Laurent, B. Bohme, V. d'Otreppe, M. Balligand and J.-P. Ponthot

A three-scale identification of orthotropic properties of trabecular bone pp. 272-274

H. Khaterchi and H. Belhadjsalah

Intervertebral disc characterisation by elastography: a preliminary study pp. 275-277

C. Vergari, P. Rouch, G. Dubois, M. Tanter, J.L. Gennisson and W. Skalli

Biomechanical breast modelling to improve patient positioning during breast cancer radiotherapy pp. 278-279

S. Vallier, J. Troccaz, I. Gabelle-Flandin and Y. Payan

Mechanical behaviour of annulus fibrosus tissue: identification of a poro-hyper-elastic model from experimental measurements pp. 280-281

A. Baldit, D. Ambard, F. Cherblanc and P. Royer

Imaging of the human Glisson's capsule by two-photon excitation microscopy and mechanical characterisation by uniaxial tensile tests pp. 282-283

C. Jayyosi, M. Coret and K. Bruyère-Garnier

Experimental protocol to characterise damage of appendicular bone pp. 284-286

R. Delille, B. Bennani, D. Lesueur, P. Drazetic, C. Fontaine and H. Morvan

Mechanical properties of deep-sea molluscan shell pp. 287-289

I. Hrabánková, J. Frýda, J. Šepitka, T. Sasaki, B. Frýdová and J. Lukeš

Nanoindentation mapping reveals gradients in the mechanical properties of dental enamel in rat incisors pp. 290-291

B. Frýdová, J. Šepitka, V. Stejskal, J. Frýda and J. Lukeš

Crystallographic texture determines mechanical properties of molluscan nacre pp. 292-293

J. Frýda, J. Šepitka, B. Frýdová, I. Hrabánková, J. Lukeš and M. Klicnarová

Space and phase normalisations in motion correction for magnetic resonance elastography pp. 294-296

M. Tardieu, M. Poirier-Quinot, R. Sinkus, L. Darrasse and X. Maître

Asymmetric kinematics and dynamics of the temporomandibular joint without pain: a case report pp. 297-299

D. Alvarez Areiza, E. Sapin-de Brosses, X. Mommers, A.S. Bonnet, N. Zwetyenga and P. Lipinski

Finite element analysis of temporomandibular joints during opening–closing motion: asynchronous case report pp. 300-301

V. Creuillot, D. Alvarez Areiza, E. Sapin de Brosses, A.S. Bonnet and P. Lipinski

A method of scar evaluation using non-contact 3D scanner pp. 302-304

A. Mitbauerová, L. Čapek and R. Ogawa

Advanced modelling of the mechanical behaviour of biological tissues: application to 3D breast deformation pp. 305-307

G. Dufaye, A. Cherouat and J.M. Bachmann

Numerical assessment of the effects of the axial variations of porosity and mineralisation on the elastic properties in the human femoral neck pp. 308-309

V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin, J.D. Laredo and G. Haïat

Experimental measures of human intracranial arteries wall properties pp. 310-311

B. Lafon, O. Eker, D. Ambard, V. Costalat, M. Sanchez, A. Baldit and F. Jourdan

Shell finite element model for interactive foetal head deformation during childbirth pp. 312-314

M. Bailet, F. Zara and E. Promayon

Comparison between the mechanical behaviour of the human healthy AA and commercial prostheses under various mechanical loadings pp. 315-317

A. Lemercier, L. Bailly, C. Geindreau, M. Toungara, P. Latil, L. Orgéas, V. Deplano and N. Boucard

Preservation of tangent modulus of pericardial tissue during cold storage pp. 318-319

E. Gultova, L. Horny, H. Chlup, R. Zitny, T. Adamek and M. Kulvajtova

Using a 3D needle–tissue force distribution basis to optimise the design of an instrumented needle pp. 320-322

A.L.G. Robert, G. Chagnon, P. Cinquin and A. Moreau-Gaudry

Anatomic sampling site and perfusate osmolarity effects on periosteum intrinsic permeability pp. 323-325

S. Lemonnier, T. Lemaire, S. Naili and M.L. Knothe Tate

Prediction of bone anisotropic mechanical properties in osteoporotic human vertebral body from microstructural parameters pp. 326-327

L. Fradet, A. Vachon, A. Levasseur, P.J. Arnoux and Y. Petit

Evaluation of the elastic modulus of cortical bone: adaptation of experimental protocols to small samples pp. 328-329

E. Lefèvre, C. Baron and M. Pithioux

Mechanical and physicochemical responses for hyaline cartilage: role of protein β1 integrin in mechanotransduction pp. 330-331

L. Cueru, C. Bougault, A. Aszodi, Y. Berthier, F. Mallein-Gerin and A.-M. Trunfio Sfarghiu

Patient-specific modelling of the calf muscle under elastic compression using magnetic resonance imaging and ultrasound elastography pp. 332-333

F. Frauziols, P.-Y. Rohan, P. Badel, S. Avril, J. Molimard and L. Navarro

Stochastic multiscale modelling of elastic properties of bone ultrastructure pp. 334-336

V. Sansalone, S. Naili, C. Soize and C. Desceliers

Determination of mechanical properties of cortical bone using AFM under dry and immersed conditions pp. 337-339

E. Lefèvre, C. Guivier-Curien, M. Pithioux and A. Charrier

Creep simulation and comparison of micro-CT-based FE model of porcine and human cancellous bone pp. 340-341

Ahmet H. Ertas

Volume 16, issue 12, 2013

Experimental Parameter Estimation Method for Nonlinear Viscoelastic Composite Material Models: An Application on Arterial Tissue pp. 1249-1261

Emin Sunbuloglu, Ergun Bozdag, Tuncer Toprak and Civan Islak

A watershed approach for improving medical image segmentation pp. 1262-1272

E.A. Zanaty and Ashraf Afifi

Development of a method for quantifying the midsole reaction model parameters pp. 1273-1277

Roozbeh Naemi and Nachiappan Chockalingam

A combined numerical and experimental technique for estimation of the forces and moments in the lumbar intervertebral disc pp. 1278-1286

Shaobai Wang, Won Man Park, Hemanth R. Gadikota, Jun Miao, Yoon Hyuk Kim, Kirkham B. Wood and Guoan Li

Patient-specific modelling of the foot: automated hexahedral meshing of the bones pp. 1287-1297

W.B. Lievers and R.W. Kent

Inspirational airflow patterns in deviated noses: a numerical study pp. 1298-1306

Jian Hua Zhu, Heow Pueh Lee, Kian Meng Lim, Shu Jin Lee, Lynette Teo Li San and De Yun Wang

Assessment of mechanical integrity for drug-eluting renal stent with micro-sized drug reservoirs pp. 1307-1318

Hao-Ming Hsiao and Yi-Hsiang Chiu

Hip joint centre localisation with an unscented Kalman filter pp. 1319-1329

Elena De Momi, Elisa Beretta and Giancarlo Ferrigno

Influences of brain tissue poroelastic constants on intracranial pressure (ICP) during constant-rate infusion pp. 1330-1343

Xiaogai Li, Hans von Holst and Svein Kleiven

A hyperelastic biphasic fibre-reinforced model of articular cartilage considering distributed collagen fibre orientations: continuum basis, computational aspects and applications pp. 1344-1361

David M. Pierce, Tim Ricken and Gerhard A. Holzapfel

Quantifying the centre of rotation pattern in a multi-body model of the lumbar spine pp. 1362-1373

Alireza Abouhossein, Bernhard Weisse and Stephen J. Ferguson

Editorial Board pp. epi-epi

The Editors

Volume 16, issue 11, 2013

Biomechanical behaviour of cerebral aneurysm and its relation with the formation of intraluminal thrombus: a patient-specific modelling study pp. 1127-1134

Xiaohong Wang and Xiaoyang Li

Extrapolation of an empirical elbow muscle co-activation relationship to a novel task set: implications for predictions of individual muscle demands pp. 1135-1142

Erin E. Middlebrook, Rebecca L. Brookham and Clark R. Dickerson

Three-dimensional numerical simulation of stress induced by different lengths of osseointegrated implants in the anterior maxilla pp. 1143-1149

Joon-Seok Lee and Young-Jun Lim

Trabecular bone remodelling under pathological conditions based on biochemical and mechanical processes involved in BMU activity pp. 1150-1162

P.J. Liotier, J.M. Rossi, S. Wendling-Mansuy and P. Chabrand

The use of preserved tissue in finite element modelling of fresh ovine vertebral behaviour pp. 1163-1169

Sarrawat Rehman, Philippa E. Garner, Jean E. Aaron and Ruth K. Wilcox

A meshless microscale bone tissue trabecular remodelling analysis considering a new anisotropic bone tissue material law pp. 1170-1184

Jorge Belinha, Renato M. Natal Jorge and Lúcia M.J.S. Dinis

The effect of hydrogel injection on cardiac function and myocardial mechanics in a computational post-infarction model pp. 1185-1195

Jeroen Kortsmit, Neil H. Davies, Renee Miller, Jesse R. Macadangdang, Peter Zilla and Thomas Franz

Effect of a pathological scapular tilt after total shoulder arthroplasty pp. 1196-1201

Marion Röthlisberger, Dominique P. Pioletti, Alain Farron and Alexandre Terrier

Comparison of walking parameters obtained from the young, elderly and adults with support pp. 1202-1212

U. Rajendra Acharya, S. Vinitha Sree, Choo Min Lim, Peng Chuan Alvin Ang, Masaki Sekine and Toshiyo Tamura

A method for 3D detection of symmetry line in asymmetric postures pp. 1213-1220

Luca Di Angelo, Paolo Di Stefano and Andrea Spezzaneve

The influence of uncemented femoral stem length and design on its primary stability: a finite element analysis pp. 1221-1231

M. Reimeringer, N. Nuño, C. Desmarais-Trépanier, M. Lavigne and P.A. Vendittoli

An exact solution of transient equations describing slow axonal transport pp. 1232-1239

A.V. Kuznetsov

Quantitative underwater 3D motion analysis using submerged video cameras: accuracy analysis and trajectory reconstruction pp. 1240-1248

Amanda P. Silvatti, Pietro Cerveri, Thiago Telles, Fábio A.S. Dias, Guido Baroni and Ricardo M.L. Barros

Volume 16, issue 10, 2013

Special issue on computational cellular and biomolecular mechanics and mechanobiology pp. 1041-1041

Amit Gefen and Cees Oomens

Location-dependent intracellular particle tracking using a cell-based coordinate system pp. 1042-1049

Shada Abuhattoum and Daphne Weihs

Integration of mechanotransduction concepts in bone tissue engineering pp. 1050-1055

Dominique P. Pioletti

A three-dimensional model for tissue deposition on complex surfaces pp. 1056-1070

Cécile M. Bidan, Frances M. Wang and John W.C. Dunlop

Quantifying the mechanical micro-environment during three-dimensional cell expansion on microbeads by means of individual cell-based modelling pp. 1071-1084

Bart Smeets, Tim Odenthal, Engelbert Tijskens, Herman Ramon and Hans Van Oosterwyck

A computational model of amoeboid cell migration pp. 1085-1095

Fong Yin Lim, Yen Ling Koon and Keng-Hwee Chiam

Mechanisms of cell migration in the adult brain: modelling subventricular neurogenesis pp. 1096-1105

A. Van Schepdael, J.M.A. Ashbourn, R. Beard, J.J. Miller and L. Geris

Sperm penetration to the zona pellucida of an oocyte: a computational model incorporating acrosome reaction pp. 1106-1111

Pavel Kozlovsky and Amit Gefen

Evaluation of a post-processing approach for multiscale analysis of biphasic mechanics of chondrocytes pp. 1112-1126

Scott C. Sibole, Steve Maas, Jason P. Halloran, Jeffrey A. Weiss and Ahmet Erdemir

Volume 16, issue 9, 2013

Regional annulus fibre orientations used as a tool for the calibration of lumbar intervertebral disc finite element models pp. 923-928

Andrea Malandrino, Jérôme Noailly and Damien Lacroix

A method to minimise error in 2D-DLT reconstruction of non-planar markers filmed with a moving camera pp. 929-936

Laurène Holden-Douilly, Philippe Pourcelot, Henry Chateau, Sylvain Falala and Nathalie Crevier-Denoix

Automated pelvic anatomical coordinate system is reproducible for determination of anterior pelvic plane pp. 937-942

Shinya Hayashi, Takayuki Nishiyama, Takaaki Fujishiro, Noriyuki Kanzaki, Nao Shibanuma, Syoji Kobashi and Masahiro Kurosaka

The influence of different magnitudes and methods of applying preload on fusion and disc replacement constructs in the lumbar spine: a finite element analysis pp. 943-953

Zheng-Cheng Zhong, Chinghua Hung, Hung-Ming Lin, Ying-Hui Wang, Chang-Hung Huang and Chen-Sheng Chen

Determination of expander apparatus displacements and contact pressures on the mucosa using FEM modelling considering mandibular asymmetries pp. 954-962

Iracema Utsch Braga, Daniel Neves Rocha, Ricardo Luiz Utsch, Estevam Barbosa Las Casas, Roberto Márcio Andrade, Renato Natal Jorge and Rafael Utsch Braga

Ultrasonic wave propagation in viscoelastic cortical bone plate coupled with fluids: a spectral finite element study pp. 963-974

Vu-Hieu Nguyen and Salah Naili

Cartesian stiffness for wrist joints: analysis on the Lie group of 3D rotations and geometric approximation for experimental evaluation pp. 975-986

Domenico Campolo

Skiing efficiency versus performance in double-poling ergometry pp. 987-992

L. Joakim Holmberg, Marie Lund Ohlsson, Matej Supej and Hans-Christer Holmberg

monitoring of bone–implant bond strength by microCT and finite element modelling pp. 993-1001

Vincent A. Stadelmann, Carl M. Conway and Steven K. Boyd

An affine micro-sphere-based constitutive model, accounting for junctional sliding, can capture F-actin network mechanics pp. 1002-1012

Hans Van Oosterwyck, José Felix Rodríguez, Manuel Doblaré and José Manuel García Aznar

On the potential of lower limb muscles to accelerate the body's centre of mass during walking pp. 1013-1021

Tomas A. Correa and Marcus G. Pandy

A finite element analysis of the vibration behaviour of a cementless hip system pp. 1022-1031

M.A. Pérez and B. Seral-García

A fluid–structure interaction-based numerical investigation on the evolution of stress, strength and rupture potential of an abdominal aortic aneurysm pp. 1032-1039

Xiaohong Wang and Xiaoyang Li

Volume 16, issue 8, 2013

A coupled biventricular finite element and lumped-parameter circulatory system model of heart failure pp. 807-818

Jonathan F. Wenk, Liang Ge, Zhihong Zhang, Mehrdad Soleimani, D. Dean Potter, Arthur W. Wallace, Elaine Tseng, Mark B. Ratcliffe and Julius M. Guccione

Development and validation of a subject-specific finite element model of a human clavicle pp. 819-829

Zuoping Li, Matthew W. Kindig, Jason R. Kerrigan, Richard W. Kent and Jeff R. Crandall

Bending and pressurisation test of the human aortic arch: experiments, modelling and simulation of a patient-specific case pp. 830-839

Claudio M. García-Herrera, Diego J. Celentano and Marcela A. Cruchaga

Computational simulation modelling of bioreactor configurations for regenerating human bladder pp. 840-851

Seokwon Pok, Dhananjay V. Dhane and Sundararajan V. Madihally

Displacement smoothing for the precise MRI-based measurement of strain in soft biological tissues pp. 852-860

Deva D. Chan, David Toribio and Corey P. Neu

Artefact-reduced kinematics measurement using a geometric finger model with mixture-prior particle filtering pp. 861-872

Cheung-Wen Chang, Li-Chieh Kuo, I-Ming Jou, Fong-Chin Su and Yung-Nien Sun

Automated localisation and boundary identification of superficial femoral artery on MRI sequences pp. 873-884

Tzung-Chi Huang, Da-Chuan Cheng, Arno Schmidt-Trucksäss and Uwe H. Schütz

An optimisation approach to multiprobe cryosurgery planning pp. 885-895

Giovanni Giorgi, Leopoldo Avalle, Massimo Brignone, Michele Piana and Giacomo Caviglia

Differential transform semi-numerical analysis of biofluid-particle suspension flow and heat transfer in non-Darcian porous media pp. 896-907

T.A. Bég, M.M. Rashidi, O. Anwar Bég and N. Rahimzadeh

On the interrelationship of permeability and structural parameters of vertebral trabecular bone: a parametric computational study pp. 908-922

René P. Widmer and Stephen J. Ferguson

Volume 16, issue 7, 2013

In Memoriam pp. 689-690

John Middleton and Christopher Jacobs

PPISE: gene ontology-based search for protein–protein interactions pp. 691-698

Byungkyu Park, Guangyu Cui, Hyunjin Lee, De-Shuang Huang and Kyungsook Han

An analytical solution describing the propagation of positive injury signals in an axon: effect of dynein velocity distribution pp. 699-706

A.V. Kuznetsov

Fast quantification of immunohistochemistry tissue microarrays in lung carcinoma pp. 707-716

Ching-Wei Wang

Evaluating a suitable level of model complexity for finite element analysis of the intact acetabulum pp. 717-724

S.G. Clarke, A.T.M. Phillips and A.M.J. Bull

Design of a fault-tolerant decision-making system for biomedical applications pp. 725-735

Oliver Faust, U. Rajendra Acharya, Bernhard H.C. Sputh and Toshiyo Tamura

Simulation of the behaviour of the L1 vertebra for different material properties and loading conditions pp. 736-746

Ibrahim Erdem, Eeric Truumees and Marjolein C.H. van der Meulen

Analysis of several biomechanical models for the simulation of lamb liver behaviour using similarity coefficients from medical image pp. 747-757

F. Martínez-Martínez, M.A. Lago, M.J. Rupérez and C. Monserrat

Automatic diagnosis of mammographic abnormalities based on hybrid features with learning classifier pp. 758-767

W. Jai Singh and B. Nagarajan

A forward incremental prestressing method with application to inverse parameter estimations and eye-specific simulations of posterior scleral shells pp. 768-780

Rafael Grytz and J. Crawford Downs

Soft tissue structures resisting anterior instability in a computational glenohumeral joint model pp. 781-789

Kevin A. Elmore and Jennifer S. Wayne

A computational model of angiogenesis based on extracellular matrix fibre orientation pp. 790-801

Lowell T. Edgar, Scott C. Sibole, Clayton J. Underwood, James E. Guilkey and Jeffrey A. Weiss

Towards real-time simulation of cardiac electrophysiology in a human heart at high resolution pp. 802-805

David F. Richards, James N. Glosli, Erik W. Draeger, Arthur A. Mirin, Bor Chan, Jean-luc Fattebert, William D. Krauss, Tomas Oppelstrup, Chris J. Butler, John A. Gunnels, Viatcheslav Gurev, Changhoan Kim, John Magerlein, Matthias Reumann, Hui-Fang Wen and John Jeremy Rice

Volume 16, issue 6, 2013

A detailed 3D finite element analysis of the peeling behaviour of a gecko spatula pp. 577-591

Roger A. Sauer and Matthias Holl

Paediatric bed fall computer simulation model development and validation pp. 592-601

Angela K. Thompson and Gina E. Bertocci

Hexahedral meshing of subject-specific anatomic structures using mapped building blocks pp. 602-611

Nicole A. Kallemeyn, Amla Natarajan, Vincent A. Magnotta and Nicole M. Grosland

Mesh considerations for finite element blast modelling in biomechanics pp. 612-621

Matthew B. Panzer, Barry S. Myers and Cameron R. Bass

Computational fluid dynamics analysis of surgical adjustment of left ventricular assist device implantation to minimise stroke risk pp. 622-638

Andres F. Osorio, Ruben Osorio, Andres Ceballos, Reginald Tran, William Clark, Eduardo A. Divo, I. Ricardo Argueta-Morales, Alain J. Kassab and William M. DeCampli

Finite element-based force/moment-driven simulation of orthodontic tooth movement pp. 639-647

M. Geiger

Haemodynamic impact of stent–vessel (mal)apposition following carotid artery stenting: mind the gaps! pp. 648-659

G. De Santis, M. Conti, B. Trachet, T. De Schryver, M. De Beule, J. Degroote, J. Vierendeels, F. Auricchio, P. Segers, P. Verdonck and B. Verhegghe

Nonlinear fractal dynamics of human colonic pressure activity based upon the box-counting method pp. 660-668

Rongguo Yan and Xudong Guo

A femoral model with all relevant muscles and hip capsule ligaments pp. 669-677

P. Helwig, U. Hindenlang, A. Hirschmüller, L. Konstantinidis, N. Südkamp and R. Schneider

Reliability and accuracy of an automated tracking algorithm to measure controlled passive and active muscle fascicle length changes from ultrasound pp. 678-687

Jarred G. Gillett, Rod S. Barrett and Glen A. Lichtwark

Volume 16, issue 5, 2013

Spatial variation of permittivity of an electrolyte solution in contact with a charged metal surface: a mini review pp. 463-480

E. Gongadze, U. van Rienen, V. Kralj-Iglič and A. Iglič

Development of a tactile stimulator with simultaneous visual and auditory stimulation using E-Prime software pp. 481-487

Hyung-Sik Kim, Hong-Won Yeon, Mi-Hyun Choi, Ji-Hye Kim, Jin-Seung Choi, Jang-Yeon Park, Jae-Hoon Jun, Jeong-Han Yi, Gye-Rae Tack and Soon-Cheol Chung

Proposition of an outflow boundary approach for carotid artery stenosis CFD simulation pp. 488-494

Yu Zhang, Toyoki Furusawa, Sheau Fung Sia, Mitsuo Umezu and Yi Qian

Analytical and numerical analysis of human dental occlusal contact pp. 495-503

Flávia de Souza Bastos, Estevam Barbosa de Las Casas and Sergio Martinez Oller

Automatic individual calibration in fall detection – an integrative ambulatory measurement framework pp. 504-510

Jian Liu and Thurmon E. Lockhart

Examination of the relationship between peak linear and angular accelerations to brain deformation metrics in hockey helmet impacts pp. 511-519

Andrew Post, Anna Oeur, Blaine Hoshizaki and Michael D. Gilchrist

How does muscle stiffness affect the internal deformations within the soft tissue layers of the buttocks under constant loading? pp. 520-529

S. Loerakker, L.R. Solis, D.L. Bader, F.P.T. Baaijens, V.K. Mushahwar and C.W.J. Oomens

Detailed finite element modelling of deep needle insertions into a soft tissue phantom using a cohesive approach pp. 530-543

Matthew Oldfield, Daniele Dini, Gianpaolo Giordano and Ferdinando Rodriguez y Baena

Validation of a heterogeneous elastic-biphasic model for the numerical simulation of the PDL pp. 544-553

Marco Favino, Christian Gross, Marcel Drolshagen, Ludger Keilig, James Deschner, Christoph Bourauel and Rolf Krause

Understanding ageing effects using complexity analysis of foot–ground clearance during walking pp. 554-564

Chandan Karmakar, Ahsan Khandoker, Rezaul Begg and Marimuthu Palaniswami

A comparison of cartilage stress-relaxation models in unconfined compression: QLV and stretched exponential in combination with fluid flow pp. 565-576

Ronald K. June and David P. Fyhrie

Volume 16, issue 4, 2013

Modelling porous structures by penalty approach in the extended finite element method pp. 347-357

T. Tran, H. Lee and S. Lim

Determination of material parameters of the two-dimensional Holzapfel–Weizsäcker type model based on uniaxial extension data of arterial walls pp. 358-367

Lin Li, Xiuqing Qian, Songhua Yan, Jianfeng Lei, Xiyun Wang, Haixia Zhang and Zhicheng Liu

Comparison of first and second heart sounds after mechanical heart valve replacement pp. 368-380

Sabri Altunkaya, Sadık Kara, Niyazi Görmüş and Saadetdin Herdem

A method for the field assessment of rolling resistance properties of manual wheelchairs pp. 381-391

Joseph Bascou, Christophe Sauret, Hélène Pillet, Philippe Vaslin, Patricia Thoreux and François Lavaste

The influence of muscles activation on the dynamical behaviour of the tympano-ossicular system of the middle ear pp. 392-402

Fernanda Gentil, Marco Parente, Pedro Martins, Carolina Garbe, João Paço, António Ferreira, João Manuel Tavares and Renato Jorge

Mechanical energy and power flow analysis of wheelchair use with different camber settings pp. 403-412

Yueh-Chu Huang, Lan-Yuen Guo, Chung-Ying Tsai and Fong-Chin Su

Development of a transient large strain contact method for biological heart valve simulations pp. 413-424

Daniel Espino, Duncan Shepherd and David Hukins

Automatic detection of age-related macular degeneration pathologies in retinal fundus images pp. 425-434

Ayşegül Güven

Marker-based classification of young–elderly gait pattern differences via direct PCA feature extraction and SVMs pp. 435-442

Bjoern Eskofier, Peter Federolf, Patrick Kugler and Benno Nigg

An approximate model for cancellous bone screw fixation pp. 443-450

C. Brown, R. Sinclair, A. Day, B. Hess and P. Procter

Stabilisation of walking by intrinsic muscle properties revealed in a three-dimensional muscle-driven simulation pp. 451-462

Chand John, Frank Anderson, Jill Higginson and Scott Delp

Volume 16, issue 3, 2013

Diffusion-reaction model for embryo development pp. 235-248

R. Allena, J. Muñoz and D. Aubry

Computerised system for measurement of muscle thickness based on ultrasonography pp. 249-255

Alexander Wong, Kaitlin Gallagher and Jack Callaghan

A multibody knee model with discrete cartilage prediction of tibio-femoral contact mechanics pp. 256-270

Trent Guess, Hongzeng Liu, Sampath Bhashyam and Ganesh Thiagarajan

Development of high-quality hexahedral human brain meshes using feature-based multi-block approach pp. 271-279

Haojie Mao, Haitao Gao, Libo Cao, Vinay Genthikatti and King Yang

Development of an image-based technique to examine joint congruency at the elbow pp. 280-290

Emily Lalone, Colin McDonald, Louis Ferreira, Terry Peters, Graham King and James Johnson

How well do the muscular synergies extracted via non-negative matrix factorisation explain the variation of torque at shoulder joint? pp. 291-301

M. Moghadam, K. Aminian, M. Asghari and M. Parnianpour

Prediction of gastric ulcers based on the change in electrical resistance of acupuncture points using fuzzy logic decision-making pp. 302-313

Riad Al-Kasasbeh, Nikolay Korenevskiy, Mahdi Alshamasin, Florin Ionescou and Andrew Smith

Integration of geometric separation mechanisms by implementing curved constrictions in a biochip microchannel fluidic separator pp. 314-327

Xiangdong Xue and Chris Bailey

Effect of intervertebral disc degeneration on disc cell viability: a numerical investigation pp. 328-337

Fabio Galbusera, Antje Mietsch, Hendrik Schmidt, Hans-Joachim Wilke and Cornelia Neidlinger-Wilke

Which factors influence the ability of a computational model to predict the deformation behaviour of skeletal muscle? pp. 338-345

S. Loerakker, D. Bader, F. Baaijens and C. Oomens

Volume 16, issue 2, 2013

Mechanotransduction in cortical bone and the role of piezoelectricity: a numerical approach pp. 119-129

M. Stroe, J. Crolet and M. Racila

A novel approach to modelling and simulating the contact behaviour between a human hand model and a deformable object pp. 130-140

D. Chamoret, S. Roth, Z.-Q. Feng, X.-T. Yan, S. Gomes and F. Peyraut

A computational model of the cardiovascular system coupled with an upper-arm oscillometric cuff and its application to studying the suprasystolic cuff oscillation wave, concerning its value in assessing arterial stiffness pp. 141-157

Fuyou Liang, Shu Takagi, Ryutaro Himeno and Hao Liu

Three-dimensional finite element analysis of the maxillary central incisor in two different situations of traumatic impact pp. 158-164

B. da Silva, J. Moreira Neto, F. da Silva and A. de Aguiar

Detection of incoherent joint state due to inaccurate bone motion estimation pp. 165-174

Cédric Schwartz, Fabien Leboeuf, Olivier Rémy-Néris, Sylvain Brochard, Mathieu Lempereur and Valérie Burdin

A CaRBS analysis of hip replacement approaches and non-pathology pp. 175-184

G. Whatling, M. Beynon and C. Holt

Characterisation of electrophysiological conduction in cardiomyocyte co-cultures using co-occurrence analysis pp. 185-197

Michael Chen, Jonathan Wong, Ellen Kuhl, Laurent Giovangrandi and Gregory Kovacs

CFD analysis of the human airways under impedance-based boundary conditions: application to healthy, diseased and stented trachea pp. 198-216

M. Malvè, S. Chandra, J. López-Villalobos, E. Finol, A. Ginel and M. Doblaré

Growth characterisation of intra-thoracic organs of children on CT scans pp. 217-221

François Coulongeat, Mohamed-Salah Jarrar, Lionel Thollon and Thierry Serre

An integrated diabetic index using heart rate variability signal features for diagnosis of diabetes pp. 222-234

U. Acharya, Oliver Faust, S. Sree, Dhanjoo Ghista, Sumeet Dua, Paul Joseph, V. Ahamed, Nittiagandhi Janarthanan and Toshiyo Tamura

Volume 16, issue 1, 2013

List of Reviewers pp. 1-5

The Editors

Repeatability assessment of functional methods to estimate the glenohumeral joint centre pp. 6-11

Mathieu Lempereur, Sylvain Brochard and Olivier Rémy-Néris

In muscle lengthening surgery multiple aponeurotomy does not improve intended acute effects and may counter-indicate: an assessment by finite element modelling pp. 12-25

Can Yucesoy, Zeynep Şeref-Ferlengez and Peter Huijing

CAD–CAM prosthetically guided bone regeneration using preformed titanium mesh for the reconstruction of atrophic maxillary arches pp. 26-32

L. Ciocca, M. Fantini, F. De Crescenzio, G. Corinaldesi and R. Scotti

Influence of differing material properties in media and adventitia on arterial adaptation — application to aneurysm formation and rupture pp. 33-53

H. Schmid, A. Grytsan, E. Poshtan, P. Watton and M. Itskov

Coupled objective function to study the role of abdominal muscle forces in lifting using the kinematics-driven model pp. 54-65

Z. El Ouaaid, A. Shirazi-Adl, N. Arjmand and A. Plamondon

An elongation model of left ventricle deformation in diastole pp. 66-72

Yingying Hu, Liang Shi, Dongxing Du, Siva Parameswaran and Zhaoming He

Analysis of wind velocity and release angle effects on discus throw using computational fluid dynamics pp. 73-80

Abel Rouboa, Victor Reis, Vishveshwar Mantha, Daniel Marinho and António Silva

Interaction of microstructure and microcrack growth in cortical bone: a finite element study pp. 81-94

Susan Mischinski and Ani Ural

Analytical modelling of retrograde transport of nerve growth factors in an axon: a transient problem pp. 95-102

A. Kuznetsov

Influence of the medial offset of the proximal humerus on the glenohumeral destabilising forces during arm elevation: a numerical sensitivity study pp. 103-111

P. Lemieux, N. Hagemeister, P. Tétreault and N. Nuño

Comparison between effects of various partial inferior turbinectomy options on nasal airflow: a computer simulation study pp. 112-118

Heow Lee, Revanth Garlapati, Vincent Chong and De Wang