Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 240, issue C, 2023

Simulation model for the study of maintenance actions in a homogeneous multi-unit system of interchangeable components, with cannibalization

Ermilso Diaz, Muñoz-Añasco, Mariela, Antonio Correcher Salvador and García, Emilio

Reliability modelling and self-healing policy design for systems with limited resources

Jingyuan Shen, Shangshang Cong, Nan Zhang and Yizhong Ma

AGP-MCS+D: An active learning reliability analysis method combining dependent Gaussian process and Monte Carlo simulation

Ning Lu, Yan-Feng Li, Hong-Zhong Huang, Jinhua Mi and Sajawal Gul Niazi

A novel digital twin-driven approach based on physical-virtual data fusion for gearbox fault diagnosis

Jingyan Xia, Ruyi Huang, Zhuyun Chen, Guolin He and Weihua Li

A dynamic data driven reliability prognosis method for structural digital twin and experimental validation

Yumei Ye, Qiang Yang, Jingang Zhang, Songhe Meng and Jun Wang

Age based preventive replacement policy for discrete time coherent systems with independent and identical components

Serkan Eryilmaz

Partial least squares-based polynomial chaos Kriging for high-dimensional reliability analysis

Tong Zhou, Yongbo Peng and Tong Guo

Integration of the BBN-NK-Boltzmann model of tunnel fire network scenarios with coupled forward and reverse rendition analysis

Guan ding Yang, Jie Liu, Wan qing Wang, Hao wen Zhou, Xiao dong Wang, Feng Lu, Li ting Wan, Liang yun Teng and Huyun Zhao

Epistemic and aleatoric uncertainty quantification for crack detection using a Bayesian Boundary Aware Convolutional Network

Rahul Rathnakumar, Yutian Pang and Yongming Liu

Efficient reliability approximation for large k-out-of-n cold standby systems with position-dependent component lifetime distributions

Chaonan Wang, Xiaolei Wang, Liudong Xing, Quanlong Guan, Chunhui Yang and Min Yu

A reliability evaluation method for electromagnetic relays based on a novel degradation-threshold-shock model with two-sided failure thresholds

Shihu Xiang, Changdong Zhao, Songhua Hao, Kui Li and Wenhua Li

Surrogate-modeling-assisted creep-fatigue reliability assessment in a low-pressure turbine disc considering multi-source uncertainty

Run-Zi Wang, Hang-Hang Gu, Yu Liu, Hideo Miura, Xian-Cheng Zhang and Shan-Tung Tu

Sensitivity influence of initial crack characteristics on structural damage propagation based on the VB-PCE model and POD reduced order algorithm

Lin Zhu, Junhao Wang, Jianchun Qiu, Min Chen and Minping Jia

Stochastic collocation enhanced line sampling method for reliability analysis

Ning Wei, Zhenzhou Lu and Yingshi Hu

Adaptive machine learning with physics-based simulations for mean time to failure prediction of engineering systems

Hao Wu, Yanwen Xu, Zheng Liu, Yumeng Li and Pingfeng Wang

Multi-scale collision risk estimation for maritime traffic in complex port waters

Xuri Xin, Kezhong Liu, Sean Loughney, Jin Wang, Huanhuan Li, Nduka Ekere and Zaili Yang

BCMS4W-ST: On the Bi-directional Circular Multi-State System with Spatiotemporal Sliding Window for Sequential Tasks

Wei Wang, Mingqiang Lin, Peng Si, Yan Wang and Binning Fan

Building reliable budget-based binary-state networks

Wei-Chang Yeh

Parameterized coefficient fine-tuning-based polynomial chaos expansion method for sphere-biconic reentry vehicle reliability analysis and design

Xiaohu Zheng, Wen Yao, Xiaoya Zhang, Weiqi Qian and Hairui Zhang

An integrated methodology applied for reliability based multi-disciplinary design optimization in EPFE with LOX/kerosene

H.R. Alimohammadi, H. Naseh and F. Ommi

Mapping the fire risk in buildings: A hybrid method of ASET-RSET concept and FED concept

Chen Junfeng, Zhong Maohua, Qiu Peiyun, Long Zeng and Chen Jiacheng

AIS data repair model based on generative adversarial network

Weibin Zhang, Weiyang Jiang, Qing Liu and Weifeng Wang

Consequence assessment of gas pipeline failure caused by external pitting corrosion using an integrated Bayesian belief network and GIS model: Application with Alberta pipeline

Haile Woldesellasse and Solomon Tesfamariam

Structure function learning of hierarchical multi-state systems with a change-point: An embedded expectation-maximization algorithm

Zhidong Shao, Qin Zhang, Yu Liu and Chaoyang Xie

TSN: A novel intelligent fault diagnosis method for bearing with small samples under variable working conditions

Peiming Shi, Shuping Wu, Xuefang Xu, Bofei Zhang, Pengfei Liang and Zijian Qiao

Assessing and improving the structural robustness of global liner shipping system: A motif-based network science approach

Mengqiao Xu, Wenhui Deng, Yifan Zhu and Linyuan LÜ

Probabilistic demand models and reliability based code calibration for reinforced concrete column and beam subjected to blast loading

Jaswanth Gangolu, Katchalla Bala Kishore and Hrishikesh Sharma

Probabilistic risk assessment of hurricane-induced debris impacts on coastal transportation infrastructure

Kooshan Amini and Jamie E. Padgett

Maintenance optimization for dependent two-component degrading systems subject to imperfect repair

Wanqing Cheng and Xiujie Zhao

Resilience assessment and enhancement methods of large-scale gas distribution networks against disruptions due to earthquakes

Yue Zhang, Wenguo Weng and Qingjie Qi

A network reliability algorithm for a stochastic flow network with non-conservation flow

Ding-Hsiang Huang

Markov-based reliability model for a mixed redundant system and parallel genetic algorithm with knowledge archives for a redundancy allocation problem

Heungseob Kim

Dynamic loading and condition-based maintenance policies for multi-state systems with periodic inspection

Xian Zhao, Xiaofei Chai, Shuai Cao and Qingan Qiu

Evaluating the resilience of electrical power line outages caused by wildfires

Hamid R. Sayarshad and Romina Ghorbanloo

Real-time precision reliability prediction for the worm drive system supported by digital twins

Hongwei Wang, Yaqi Liu, Zongyi Mu, Jiawei Xiang and Jian Li

Digital twin-driven focal modulation-based convolutional network for intelligent fault diagnosis

Sheng Li, Qiubo Jiang, Yadong Xu, Ke Feng, Yulin Wang, Beibei Sun, Xiaoan Yan, Xin Sheng, Ke Zhang and Qing Ni

Pyramid-type zero-shot learning model with multi-granularity hierarchical attributes for industrial fault diagnosis

Xu Chen, Chunhui Zhao and Jinliang Ding

An empirical study of the added value of the sequential learning of model parameters to industrial system health monitoring

Yunfei Zhao, Pavan Kumar Vaddi, Michael Pietrykowski, Marat Khafizov and Carol Smidts

Verifying empirical predictive modeling of societal vulnerability to hazardous events: A Monte Carlo experimental approach

Yi Victor Wang, Seung Hee Kim and Menas C. Kafatos

Optimal maintenance strategy for large-scale production systems under maintenance time uncertainty

Haibo Jin, Xianhe Song and Hao Xia

Cost-based preventive maintenance of industrial robot system

Hongyan Dui, Huiting Xu, Luyu Zhang and Jia Wang

Measuring node importance in air transportation systems: On the quality of complex network estimations

Sebastian Wandelt, Yifan Xu and Xiaoqian Sun

Optimal maintenance policy for systems with environment-modulated degradation and random shocks considering imperfect maintenance

Yuxi Mai, Jianwu Xue and Bei Wu

Optimizing dynamic performance of phased-mission systems with a common bus and warm standby elements

Chen Lin, Hui Xiao, Yisha Xiang and Rui Peng

Graph embedding deep broad learning system for data imbalance fault diagnosis of rotating machinery

Mingkuan Shi, Chuancang Ding, Rui Wang, Changqing Shen, Weiguo Huang and Zhongkui Zhu

PAOLTransformer: Pruning-adaptive optimal lightweight Transformer model for aero-engine remaining useful life prediction

Xin Zhang, Jiankai Sun, Jiaxu Wang, Yulin Jin, Lei Wang and Zhiwen Liu

Dynamic fleet maintenance management model applied to rolling stock

Adolfo Crespo del Castillo, Marcos, José Antonio and Ajith Kumar Parlikad

A new active learning method for system reliability analysis with multiple failure modes

Chunlong Xu, Ya Yang, Huajun Wu and Jianping Zhou

A Kriging-based probabilistic framework for multi-hazard performance assessment of transmission tower-line systems under coupled wind and rain loads

Wenzhe Bi, Li Tian, Chao Li and Zhen Ma

Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity

Huiling Zheng, Jun Yang and Yu Zhao

A novel sample selection approach based universal unsupervised domain adaptation for fault diagnosis of rotating machinery

Biliang Lu, Yingjie Zhang, Zhaohua Liu, Hualiang Wei and Qingshuai Sun

Digital twin-based degradation prediction for train electro-pneumatic valve

Liujing Xiong, Yifan He, Yuejian Chen, Jinjun Lu and Gang Niu