Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 199, issue C, 2020

Reliability analysis for a hybrid flow shop with due date consideration

Yi-Kuei Lin and Ding-Hsiang Huang

A resilience measure formulation that considers sensor faults

Minji Yoo, Taejin Kim, Joung Taek Yoon, Yunhan Kim, Sooho Kim and Byeng D. Youn

Game theory based solution selection for multi-objective redundancy allocation in interval-valued problem parameters

Ran Cao, David W. Coit, Wei Hou and Yushu Yang

Who cares what it means? Practical reasons for using the word resilience with critical infrastructure operators

L. Petersen, D. Lange and M. Theocharidou

Deep reinforcement learning-based sampling method for structural reliability assessment

Zhengliang Xiang, Yuequan Bao, Zhiyi Tang and Hui Li

Failure mode and effect analysis improvement: A systematic literature review and future research agenda

Jia Huang, Jian-Xin You, Hu-Chen Liu and Ming-Shun Song

Bayesian analysis method on processing reliability data of high flux engineering test reactor

Hui Bao, Yun Guo, Hang Zhang, Changhong Peng and Jianchao Lu

Partially observable Markov decision processes for optimal operations of gas transmission networks

Michele Compare, Piero Baraldi, Paolo Marelli and Enrico Zio

Unsupervised local cluster-weighted bootstrap aggregating the output from multiple stochastic simulators

Imad Abdallah, Konstantinos Tatsis and Eleni Chatzi

An integrated reliability approach with improved importance sampling for low-cycle fatigue damage prediction of turbine disks

Haifeng Gao, Anjenq Wang, Enrico Zio and Guangchen Bai

A general framework for dependability modelling coupling discrete-event and time-driven simulation

Ferdinando Chiacchio, Alessandra Iacono, Lucio Compagno and Diego D'Urso

Risk analysis of an underground gas storage facility using a physics-based system performance model and Monte Carlo simulation

Zaki Syed and Yuri Lawryshyn

Two-interdependent-performance multi-state system: Definitions and reliability evaluation

Changzheng Shao and Yi Ding

Time-variant reliability analysis for industrial robot RV reducer under multiple failure modes using Kriging model

Hua-Ming Qian, Yan-Feng Li and Hong-Zhong Huang

Optimal designs of multi-event interlocks

Sing-Zhi Chan and Chuei-Tin Chang

Redundancy allocation problem of phased-mission system with non-exponential components and mixed redundancy strategy

Xiang-Yu Li, Yan-Feng Li and Hong-Zhong Huang

Design optimization of a simple step-stress accelerated life test – Contrast between continuous and interval inspections with non-uniform step durations

David Han and Tianyu Bai

Reliability assessment with density scanned adaptive Kriging

Rui Teixeira, Maria Nogal, O’Connor, Alan and Beatriz Martinez-Pastor

Assessing the reliability of electronic products using customer knowledge discovery

Xing Pan, Huixiong Wang, Weijia You, Manli Zhang and Yuexiang Yang

An improved similarity-based prognostic algorithm for RUL estimation using an RNN autoencoder scheme

Wennian Yu, Yong Kim and Chris Mechefske

Optimization problems for a parallel system with multiple types of dependent components

Serkan Eryilmaz and Murat Ozkut

Protection-interdiction-restoration: Tri-level optimization for enhancing interdependent network resilience

Nafiseh Ghorbani-Renani, González, Andrés D., Kash Barker and Nazanin Morshedlou

Architecture assessment for safety critical plant operation using reachability analysis of timed automata

David Gouyon, Pétin, Jean-François, Thomas Cochard and Catherine Devic

Modeling ageing effects for multi-state systems with multiple components subject to competing and dependent failure processes

Yingsai Cao, Sifeng Liu, Zhigeng Fang and Wenjie Dong

Probabilistic classification of hazardous materials release events in train incidents and cargo tank truck crashes

Amirfarrokh Iranitalab and Aemal Khattak

A resilience measure for supply chain systems considering the interruption with the cyber-physical systems

Liwei Chen, Hongyan Dui and Chi Zhang

Joint production control and maintenance policy for a serial system with quality deterioration and stochastic demand

Lin Wang, Zhiqiang Lu and Yifei Ren

Reliability assessment of multi-state phased mission systems with common bus performance sharing considering transmission loss and performance storage

Chen Cheng, Jun Yang and Lei Li

Multi-state balanced systems with multiple failure criteria

Bei Wu, Lirong Cui and Chen Fang

Warm-spare provisioning computing network with switching failure, common cause failure, vacation interruption, and synchronized reneging

Chandra Shekhar, Neeraj Kumar, Amit Gupta, Amit Kumar and Shreekant Varshney

Recognition of the fatigue status of pilots using BF–PSO optimized multi-class GP classification with sEMG signals

Bin Xu, Qi Wu, Chen Xi and Ren He

Integrated imperfect multimission selective maintenance and repairpersons assignment problem

K. Chaabane, A. Khatab, C. Diallo, E.-H. Aghezzaf and U. Venkatadri

Analysis of the cascading failure for scale-free networks based on a multi-strategy evolutionary game

Hongyan Dui, Xueyu Meng, Hui Xiao and Jianjun Guo

Optimal abort rules and subtask distribution in missions performed by multiple independent heterogeneous units

Gregory Levitin, Maxim Finkelstein and Yanping Xiang

A system active learning Kriging method for system reliability-based design optimization with a multiple response model

Mi Xiao, Jinhao Zhang and Liang Gao

Integrated planning of operations and on-job training in maintenance logistics networks

Shayan Tavakoli Kafiabad, Masoumeh Kazemi Zanjani and Mustapha Nourelfath

Volume 198, issue C, 2020

Prioritising investments in safety measures in the chemical industry by using the Analytic Hierarchy Process

Eirik Bjorheim Abrahamsen, Maria Francesca Milazzo, Jon T. Selvik, Frank Asche and Abrahamsen, HÃ¥kon Bjorheim

Combined automotive safety and security pattern engineering approach

H. Martin, Z. Ma, Ch. Schmittner, B. Winkler, M. Krammer, D. Schneider, T. Amorim, G. Macher and Ch. Kreiner

Incorporating software failure in risk analysis––Part 2: Risk modeling process and case study

Christoph A. Thieme, Ali Mosleh, Ingrid B. Utne and Jeevith Hegde

Regression-based finite element machines for reliability modeling of downhole safety valves

Danilo Colombo, Gilson Brito Alves Lima, Danillo Roberto Pereira and Papa, João P.

Liner-dedicated manageability estimation for port operational reliability

Jaehun Park and Byung Kwon Lee

Real time nuclear power plant operating state cognitive algorithm development using dynamic Bayesian network

ChoHwan Oh and Jeong Ik Lee

Risk assessment of uncertain random system—Level-1 and level-2 joint propagation of uncertainty and probability in fault tree analysis

Lunhu Hu, Rui Kang, Xing Pan and Dujun Zuo

Gaussian process metamodeling of functional-input code for coastal flood hazard assessment

Betancourt, José, Bachoc, François, Thierry Klein, Idier, Déborah, Rodrigo Pedreros and Rohmer, Jérémy

Probability-space surrogate modeling for fast multidisciplinary optimization under uncertainty

Saideep Nannapaneni and Sankaran Mahadevan

Probabilistic framework to evaluate the resilience of engineering systems using Bayesian and dynamic Bayesian networks

Omar Kammouh, Paolo Gardoni and Gian Paolo Cimellaro

Lifecycle operational resilience assessment of urban water distribution networks

Wei Liu, Zhaoyang Song and Min Ouyang

A novel learning function based on Kriging for reliability analysis

Yan Shi, Zhenzhou Lu, Ruyang He, Yicheng Zhou and Siyu Chen

Architectural design and analysis of a steer-by-wire system in view of functional safety concept

Chao Huang and Liang Li

Failure assessment logic model (FALM): A new approach for reliability analysis of satellite attitude control subsystem

Mahrad Damircheli, Mahdi Fakoor and Hamed Yadegari

Cascading overload failure analysis in renewable integrated power grids

Muhammad Adnan and Muhammad Tariq

Adaptive Bayesian quadrature based statistical moments estimation for structural reliability analysis

Tong Zhou and Yongbo Peng

Modeling and assessing interdependencies between critical infrastructures using Bayesian network: A case study of inland waterway port and surrounding supply chain network

Niamat Ullah Ibne Hossain, Safae El Amrani, Raed Jaradat, Mohammad Marufuzzaman, Randy Buchanan, Christina Rinaudo and Michael Hamilton

EEK-SYS: System reliability analysis through estimation error-guided adaptive Kriging approximation of multiple limit state surfaces

Chen Jiang, Haobo Qiu, Liang Gao, Dapeng Wang, Zan Yang and Liming Chen

Reliability analysis of IoT systems with competitions from cascading probabilistic function dependence

Guilin Zhao and Liudong Xing

Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state system with common bus performance sharing

Peng Su, Guanjun Wang and Fengjun Duan

Optimizing infrastructure resilience under budgetary constraint

Mohammad Najarian and Gino J. Lim

An approach on lifetime estimation of distribution transformers based on degree of polymerization

Mohamadreza Ariannik, Ali A. Razi-Kazemi and Matti Lehtonen

A modified method for the safety factor parameter: The use of big data to improve petroleum pipeline reliability assessment

Hewei Zhang, Shaohua Dong, Jiatong Ling, Laibin Zhang and Brenda Cheang

Dynamic opportunistic maintenance planning for multi-component redundant systems with various types of opportunities

Hai Canh Vu, Phuc Do, Mitra Fouladirad and Antoine Grall

Cyber risks of PMU networks with observation errors: Assessment and mitigation

Weiyong Ding, Maochao Xu, Yu Huang and Peng Zhao

Sequential imperfect preventive maintenance model with failure intensity reduction with an application to urban buses

Yu Zhou, Gang Kou, Hui Xiao, Yi Peng and Fawaz E. Alsaadi

Reliability analysis of circular multi-state sliding window system with sequential demands

Wei Wang, Yongnian Fu, Peng Si and Mingqiang Lin

Approximate Bayesian computation (ABC) method for estimating parameters of the gamma process using noisy data

Indranil Hazra, Mahesh D. Pandey and Noldainerick Manzana

Reliability analysis and design optimization of nonlinear structures

Pinghe Ni, Jun Li, Hong Hao, Weimin Yan, Xiuli Du and Hongyuan Zhou

Global sensitivity analysis in high dimensions with PLS-PCE

Max Ehre, Iason Papaioannou and Daniel Straub

Optimal design of a linear sliding window system with consideration of performance sharing

Hui Xiao, Yiyun Zhang, Yisha Xiang and Rui Peng

Quantitative comparison of cascading failure models for risk-based decision making in power systems

Alexander E. David, Blazhe Gjorgiev and Giovanni Sansavini