Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 184, issue C, 2019

Dirt and mud detection and diagnosis on a wind turbine blade employing guided waves and supervised learning classifiers pp. 2-12

Arcos Jiménez, Alfredo, Gómez Muñoz, Carlos Quiterio and García Márquez, Fausto Pedro

Condition monitoring of a steam turbine generator using wavelet spectrum based control chart pp. 13-20

Suk Joo Bae, Byeong Min Mun, Woojin Chang and Brani Vidakovic

Detection of local bonding failure damage by Digital Image Correlation technique pp. 21-26

Y.-H. Huh, Jongil Kim and Seong-Gu Hong

Fault detection and identification method using observer-based residuals pp. 27-40

Haedong Jeong, Bumsoo Park, Seungtae Park, Hyungcheol Min and Seungchul Lee

Hierarchical discriminating sparse coding for weak fault feature extraction of rolling bearings pp. 41-54

Jinyang Jiao, Ming Zhao, Jing Lin and Kaixuan Liang

Reliable multiple combined fault diagnosis of bearings using heterogeneous feature models and multiclass support vector Machines pp. 55-66

M.M. Manjurul Islam and Jong-Myon Kim

A reliable technique for remaining useful life estimation of rolling element bearings using dynamic regression models pp. 67-76

Wasim Ahmad, Sheraz Ali Khan, M M Manjurul Islam and Jong-Myon Kim

Bayesian and likelihood inferences on remaining useful life in two-phase degradation models under gamma process pp. 77-85

M.H. Ling, H.K.T. Ng and K.L. Tsui

Noise-dependent ranking of prognostics algorithms based on discrepancy without true damage information pp. 86-100

Yiwei Wang, Christian Gogu, Nam H. Kim, Raphael T. Haftka, Nicolas Binaud and Christian Bes

Long-term prediction of system degradation with similarity analysis of multivariate patterns pp. 101-109

Shisheng Zhong, Zhixue Tan and Lin Lin

An ensemble learning-based prognostic approach with degradation-dependent weights for remaining useful life prediction pp. 110-122

Zhixiong Li, Dazhong Wu, Chao Hu and Janis Terpenny

Hidden Markov model with auto-correlated observations for remaining useful life prediction and optimal maintenance policy pp. 123-136

Zhen Chen, Yaping Li, Tangbin Xia and Ershun Pan

A Bayesian approach for a damage growth model using sporadically measured and heterogeneous on-site data from a steam turbine pp. 137-150

Woosung Choi, Byeng D. Youn, Hyunseok Oh and Nam H. Kim

Evolution of the dynamic response and its effects on the serviceability of offshore wind turbines with stochastic loads and soil degradation pp. 151-163

Woochul Nam, Ki-Yong Oh and Bogdan I. Epureanu

Optimal allocation of prognostics and health management capabilities to improve the reliability of a power transmission network pp. 164-180

Michele Compare, Luca Bellani and Enrico Zio

Life-cycle maintenance cost analysis framework considering time-dependent false and missed alarms for fault diagnosis pp. 181-192

Joung Taek Yoon, Byeng D. Youn, Minji Yoo, Yunhan Kim and Sooho Kim

Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption pp. 193-201

Gurmeet Singh, T.Ch. Anil Kumar and V.N.A. Naikan

Adaptive SVM-based real-time quality assessment for primer-sealer dispensing process of sunroof assembly line pp. 202-212

YeongGwang Oh, Kasin Ransikarbum, Moise Busogi, Daeil Kwon and Namhun Kim

PHM-based wiring system damage estimation for near zero downtime in manufacturing facilities pp. 213-218

Jinwoo Lee, Daeil Kwon, Namhun Kim and Changyong Lee

A field-applicable health monitoring method for photovoltaic system pp. 219-227

Changwoon Han and Hyeonseok Lee

Remaining useful life estimation in aeronautics: Combining data-driven and Kalman filtering pp. 228-239

Marcia Baptista, Henriques, Elsa M.P., Ivo P. de Medeiros,, Malere, Joao P., Nascimento, Cairo L. and Helmut Prendinger

Application of stress test concepts for port infrastructures against natural hazards. The case of Thessaloniki port in Greece pp. 240-257

Kyriazis Pitilakis, Sotiris Argyroudis, Stavroula Fotopoulou, Stella Karafagka, Kalliopi Kakderi and Jacopo Selva

Verification of safety integrity level of high demand system based on Stochastic Petri Nets and Monte Carlo Simulation pp. 258-265

Xianqiong Zhao, Olaf Malasse and Buchheit, Grégory

Volume 183, issue C, 2019

Status and future perspectives of reliability assessment for electric vehicles pp. 1-16

Foad H. Gandoman, Abdollah Ahmadi, Peter Van den Bossche, Joeri Van Mierlo, Noshin Omar, Ali Esmaeel Nezhad, Hani Mavalizadeh and Mayet, Clément

Reliability optimization of series-parallel systems with K-mixed redundancy strategy pp. 17-28

Abdossaber Peiravi, Mahdi Karbasian, Mostafa Abouei Ardakan and David W. Coit

Influence of failure propagation on mission abort policy in heterogeneous warm standby systems pp. 29-38

Gregory Levitin, Liudong Xing and Liang Luo

An analysis of helicopter accident reports in Brazil from a human factors perspective pp. 39-46

Filho, Anastácio Pinto Gonçalves, Carlos Augusto Souza, Eduardo Luiz Bonecker Siqueira, Mozart Anderson Souza and Tales Pinheiro Vasconcelos

A general failure-pursuing sampling framework for surrogate-based reliability analysis pp. 47-59

Chen Jiang, Haobo Qiu, Zan Yang, Liming Chen, Liang Gao and Peigen Li

A comparison of fault trees and the Dynamic Flowgraph Methodology for the analysis of FPGA-based safety systems part 2: Theoretical investigations pp. 60-83

Phillip McNelles, Guna Renganathan, Zhao Chang Zeng, Marius Chirila and Lixuan Lu

Novel model calibration method via non-probabilistic interval characterization and Bayesian theory pp. 84-92

Chong Wang and Hermann G. Matthies

Submodularity issues in value-of-information-based sensor placement pp. 93-103

C. Malings and M. Pozzi

A multi-objective reliability optimization for reconfigurable systems considering components degradation pp. 104-115

Jiangbin Zhao, Shubin Si and Zhiqiang Cai

A new approach for estimating the parameters of Weibull distribution via particle swarm optimization: An application to the strengths of glass fibre data pp. 116-127

Sukru Acitas, Cagdas Hakan Aladag and Birdal Senoglu

Machine learning of fire hazard model simulations for use in probabilistic safety assessments at nuclear power plants pp. 128-142

Clarence Worrell, Louis Luangkesorn, Joel Haight and Thomas Congedo

A repair and replacement policy for repairable systems based on probability and mean of profits pp. 143-152

Fatemeh Safaei, Jafar Ahmadi and N. Balakrishnan

Review of major approaches to analyze vulnerability in power system pp. 153-172

Amin Abedi, Ludovic Gaudard and Franco Romerio

A novel failure mode and effect analysis model for machine tool risk analysis pp. 173-183

Huai-Wei Lo, James J.H. Liou, Chun-Nen Huang and Yen-Ching Chuang

Degradation modeling and condition-based maintenance of boiler heat exchangers using gamma processes pp. 184-196

Michael E. Cholette, Hongyang Yu, Pietro Borghesani, Lin Ma and Geoff Kent

Life-cycle management of deteriorating civil infrastructure considering resilience to lifetime hazards: A general approach based on renewal-reward processes pp. 197-212

David Y. Yang and Dan M. Frangopol

Quantitative security analysis of a dynamic network system under lateral movement-based attacks pp. 213-225

Yu Shi, Xiaolin Chang, Rodríguez, Ricardo J., Zhenjiang Zhang and Kishor S. Trivedi

A cost-driven reliability demonstration plan based on accelerated degradation tests pp. 226-239

Seong-Joon Kim, Byeong Min Mun and Suk Joo Bae

Remaining useful life predictions for turbofan engine degradation using semi-supervised deep architecture pp. 240-251

Listou Ellefsen, André, Bjørlykhaug, Emil, Æsøy, Vilmar, Sergey Ushakov and Houxiang Zhang

Analysis of simplification in Markov-based models for performance assessment of Safety Instrumented System pp. 252-260

Hooshyar Azizpour and Mary Ann Lundteigen

Optimization of high-level preventive maintenance scheduling for high-speed trains pp. 261-275

Boliang Lin, Jianping Wu, Ruixi Lin, Jiaxi Wang, Hui Wang and Xuhui Zhang

Exact calculation of network robustness pp. 276-280

Grace Lordan and Maria Albareda-Sambola

A tool for evaluating repairable systems based on Generalized Renewal Processes pp. 281-297

Felix de Oliveira, Cícero Carlos, Paulo Renato Alves Firmino and Cristino, Cláudio Tadeu

A new systems engineering structured assurance methodology for complex systems pp. 298-310

G.P. Farnell, A.J. Saddington and L.J. Lacey

Sobol tensor trains for global sensitivity analysis pp. 311-322

Rafael Ballester-Ripoll, Enrique G. Paredes and Renato Pajarola

An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression pp. 323-340

M. Steiner, J.-M. Bourinet and T. Lahmer

Bayesian-model averaging using MCMCBayes for web-browser vulnerability discovery pp. 341-359

Reuben Johnston, Shahryar Sarkani, Thomas Mazzuchi, Thomas Holzer and Timothy Eveleigh

Literature review on modeling and simulation of energy infrastructures from a resilience perspective pp. 360-373

Jing Wang, Wangda Zuo, Landolf Rhode-Barbarigos, Xing Lu, Jianhui Wang and Yanling Lin

Predicting system failure rates of SRAM-based FPGA on-board processors in space radiation environments pp. 374-386

Seunghwa Jung and Jihwan P. Choi

An open modelling approach for availability and reliability of systems pp. 387-399

Jussi-Pekka Penttinen, Arto Niemi, Johannes Gutleber, Kari T. Koskinen, Coatanéa, Eric and Jouko Laitinen

Robust prediction of dense gas flows under uncertain thermodynamic models pp. 400-421

X. Merle and P. Cinnella