|
|
Reliability Engineering and System Safety
2005 - 2025
Current editor(s): Carlos Guedes Soares From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 225, issue C, 2022
- A data-driven roadmap for creep-fatigue reliability assessment and its implementation in low-pressure turbine disk at elevated temperatures

- Run-Zi Wang, Hang-Hang Gu, Shun-Peng Zhu, Kai-Shang Li, Ji Wang, Xiao-Wei Wang, Miura Hideo, Xian-Cheng Zhang and Shan-Tung Tu
- Mitigating cascading failures of spatially embedded cyber–physical power systems by adding additional information links

- Zhengcheng Dong, Meng Tian, Xin Li, Jingang Lai and Ruoli Tang
- A multi-layer spiking neural network-based approach to bearing fault diagnosis

- Lin Zuo, Fengjie Xu, Changhua Zhang, Tangfan Xiahou and Yu Liu
- Reliability–redundancy allocation problem in multi-state flow network: Minimal cut-based approximation scheme

- Hanxiao Zhang, Muxia Sun and Yan-Fu Li
- Trust and security of electric vehicle-to-grid systems and hardware supply chains

- Negin Moghadasi, Zachary A. Collier, Andrew Koch, David L. Slutzky, Thomas L. Polmateer, Mark C. Manasco and James H. Lambert
- Adaptive surrogate models with partially observed information

- Yanwen Xu, Anabel Renteria and Pingfeng Wang
- Optimal redundancies of parallel–series systems in irrelevancy coverage model

- Jianwen Xiang, Zixiang Wang, Chuanli Wu, Dongdong Zhao and Jing Tian
- Stochastic hybrid system approach to task-orientated remaining useful life prediction under time-varying operating conditions

- Junqi Long, Chuanhai Chen, Zhifeng Liu, Jinyan Guo and Weizheng Chen
- Green port oriented resilience improvement for traffic-power coupled networks

- Lu Zhen, Shumin Lin and Chenhao Zhou
- Post-earthquake resilience optimization of a rural “road-bridge†transportation network system

- Mingyuan Zhang, Xiangjie Yang, Juan Zhang and Gang Li
- Model-based IDS design for ICSs

- Mohamad-Houssein Monzer, Kamal Beydoun, Alaa Ghaith and Jean-Marie Flaus
- Optimum opportunistic maintenance schedule over variable horizons considering multi-stage degradation and dynamic strategy

- Gehui Liu, Shaokuan Chen, Tinkin Ho, Xinchen Ran, Baohua Mao and Zhen Lan
- Computing Sobol indices in probabilistic graphical models

- Rafael Ballester-Ripoll and Manuele Leonelli
- Unrepairable system with consecutively used imperfect storage units

- Gregory Levitin, Liudong Xing and Yuanshun Dai
- Universal redundancy strategy for system reliability optimization

- Abdossaber Peiravi, Mustapha Nourelfath and Masoumeh Kazemi Zanjani
- 3-Dimensional general ADT modeling and analysis: Considering epistemic uncertainties in unit, time and stress dimension

- Xiao-Yang Li, Da-Yu Chen, Ji-Peng Wu and Rui Kang
- Fault analysis of dragline subsystem using Bayesian network model

- Atma Ram Sahu and Sanjay Kumar Palei
- Exhaustive simulation approach for severe accident risk in nuclear power plants: OPR-1000 full-power internal events

- Jaehyun Cho, Sang Hun Lee, Young Suk Bang, Suwon Lee and Soo Yong Park
- The two-stage RUL prediction across operation conditions using deep transfer learning and insufficient degradation data

- Han Cheng, Xianguang Kong, Qibin Wang, Hongbo Ma and Shengkang Yang
- A quantitative input for evaluating human error of visual Neglection: Prediction of Operator's detection time spent on perceiving critical visual signal

- Lunhu Hu, Xing Pan, Song Ding, Dujun Zuo and Rui Kang
- Improved quantitative risk assessment of a natural gas pipeline considering high-consequence areas

- Yuanbo Yin, Hao Yang, Pengfei Duan, Luling Li, Enrico Zio, Cuiwei Liu and Yuxing Li
- A cost-effective optimization model of safety investment allocation for risk reduction of domino effects

- Xiaoxue Guo, Long Ding, Jie Ji and Valerio Cozzani
- Bridging strategy for the disruption of metro considering the reliability of transportation system: Metro and conventional bus network

- Shuai Zheng, Yugang Liu, Yexin Lin, Qiang Wang, Hongtai Yang and Bin Chen
- Early detection of reliability related problems from two-dimensional warranty data considering labour code priority index

- Sanjib Kumar Gupta and Gaurangadeb Chattopadhyay
- Interpretable boosting tree ensemble method for multisource building fire loss prediction

- Ning Wang, Yan Xu and Sutong Wang
- A novel sub-label learning mechanism for enhanced cross-domain fault diagnosis of rotating machinery

- Minqiang Deng, Aidong Deng, Yaowei Shi, Yang Liu and Meng Xu
- Trend attention fully convolutional network for remaining useful life estimation

- Linchuan Fan, Yi Chai and Xiaolong Chen
- An adversarial transfer network with supervised metric for remaining useful life prediction of rolling bearing under multiple working conditions

- Jichao Zhuang, Minping Jia and Xiaoli Zhao
- A predictive sliding local outlier correction method with adaptive state change rate determining for bearing remaining useful life estimation

- Han Wang, Dongdong Wang, Haoxiang Liu and Gang Tang
- Nonlinear degradation model and reliability analysis by integrating image covariate

- Xingyu Chen, Qingyu Yang and Xin Wu
- Predicting wind-caused floater intrusion risk for overhead contact lines based on Bayesian neural network with spatiotemporal correlation analysis

- Jian Wang, Shibin Gao, Long Yu, Dongkai Zhang, Chugang Ding, Ke Chen and Lei Kou
- An improved particle swarm optimization algorithm for the reliability–redundancy allocation problem with global reliability

- Shuai Li, Xuefen Chi and Baozhu Yu
- A general hierarchical ensemble-learning framework for structural reliability analysis

- Changcong Zhou, Hanlin Zhang, Marcos A. Valdebenito and Haodong Zhao
- An adaptive subset simulation algorithm for system reliability analysis with discontinuous limit states

- Jianpeng Chan, Iason Papaioannou and Daniel Straub
- Reliability of high-speed electric multiple units in terms of the expanded multi-state flow network

- Shuai Lin, Limin Jia, Hengrun Zhang and Pengzhu Zhang
- A multi-head attention network with adaptive meta-transfer learning for RUL prediction of rocket engines

- Tongyang Pan, Jinglong Chen, Zhisheng Ye and Aimin Li
- Measuring network interdependency between dependent networks: A supply-demand-based approach

- Qing-Chang Lu, Peng-Cheng Xu, Xiangmo Zhao, Lei Zhang, Xiaoling Li and Xin Cui
- Joint optimization of mission aborts and allocation of standby components considering mission loss

- Xian Zhao, Ying Dai, Qingan Qiu and Yaguang Wu
- A systematic method for the optimization of gas supply reliability in natural gas pipeline network based on Bayesian networks and deep reinforcement learning

- Lin Fan, Huai Su, Wei Wang, Enrico Zio, Li Zhang, Zhaoming Yang, Shiliang Peng, Weichao Yu, Lili Zuo and Jinjun Zhang
- A deep reinforcement learning approach for rail renewal and maintenance planning

- Reza Mohammadi and Qing He
- Reliability Modeling and Optimization of Circular Multi-State Sliding Time Window System with Sequential Demands

- Wei Wang, Chao Fang, Yan Wang and Jin Li
- Global contextual residual convolutional neural networks for motor fault diagnosis under variable-speed conditions

- Yadong Xu, Xiaoan Yan, Beibei Sun and Zheng Liu
- Hypergraph-based joint optimization of spare part provision and maintenance scheduling for serial-parallel multi-station manufacturing systems

- Mixin Zhu and Xiaojun Zhou
- Parallel adaptive Bayesian quadrature for rare event estimation

- Chao Dang, Pengfei Wei, Matthias G.R. Faes, Marcos A. Valdebenito and Michael Beer
- System operational reliability evaluation based on dynamic Bayesian network and XGBoost

- Yongjin Guo, Hongdong Wang, Yu Guo, Mingjun Zhong, Qing Li and Chao Gao
- Novel direct algorithm for computing simultaneous all-level reliability of multistate flow networks

- Wei-Chang Yeh
- Multi-stage residual life prediction of aero-engine based on real-time clustering and combined prediction model

- Junqiang Liu, Zhuoqian Yu, Hongfu Zuo, Rongchunxue Fu and Xiaonan Feng
- Dually attentive multiscale networks for health state recognition of rotating machinery

- Yadong Xu, Xiaoan Yan, Beibei Sun and Zheng Liu
- Scenario evolutionary analysis for maritime emergencies using an ensemble belief rule base

- Baode Li, Jing Lu, Jing Li, Xuebin Zhu, Chuan Huang and Wan Su
- A Hybrid Physics-Based and Data-Driven Model for Power Distribution System Infrastructure Hardening and Outage Simulation

- William Hughes, Wei Zhang, Diego Cerrai, Amvrossios Bagtzoglou, David Wanik and Emmanouil Anagnostou
- Optimizing the maximum filling level of perfect storage in system with imperfect production unit

- Gregory Levitin, Liudong Xing and Yuanshun Dai
- Multifractional and long-range dependent characteristics for remaining useful life prediction of cracking gas compressor

- Wanqing Song, Shouwu Duan, Enrico Zio and Aleksey Kudreyko
- The number of failed components upon system failure when the lifetimes are discretely distributed

- Serkan Eryilmaz and Femin Yalcin
- An effective implementation of reliability methods for Bayesian model updating of structural dynamic models with multiple uncertain parameters

- D.J. Jerez, H.A. Jensen and M. Beer
- Distance self-attention network method for remaining useful life estimation of aeroengine with parallel computing

- Jun Xia, Yunwen Feng, Da Teng, Junyu Chen and Zhicen Song
- Maintenance modeling for balanced systems subject to two competing failure modes

- Jingjing Wang, Rui Zheng and Tianran Lin
- Adaptive structural reliability analysis method based on confidence interval squeezing

- Zequan Chen, Guofa Li, Jialong He, Zhaojun Yang and Jili Wang
- Uncertain differential equation based accelerated degradation modeling

- Zhe Liu, Xiaoyang Li and Rui Kang
- Condition-based maintenance strategy for redundant systems with arbitrary structures using improved reinforcement learning

- Ao Yang, Qingan Qiu, Mingren Zhu, Lirong Cui, Weilin Chen and Jianhui Chen
- An automated machine learning approach for earthquake casualty rate and economic loss prediction

- Weiyi Chen and Limao Zhang
- A reliability evaluation model of rolling bearings based on WKN-BiGRU and Wiener process

- Le Dai, Junyu Guo, Jia-Lun Wan, Jiang Wang and Xueping Zan
| | |
|