Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu (repec@elsevier.com).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 182, issue C, 2019

Physics-based prognostics of lithium-ion battery using non-linear least squares with dynamic bounds pp. 1-12

Austin Downey, Yu-Hui Lui, Chao Hu, Simon Laflamme and Shan Hu

Quantitative risk reduction by means of recovery strategies pp. 13-32

París, C., C. Queral, J. Mula, Gómez-Magán, J., Sánchez-Perea, M., Meléndez, E. and J. Gil

REAK: Reliability analysis through Error rate-based Adaptive Kriging pp. 33-45

Zeyu Wang and Abdollah Shafieezadeh

Reliability and availability analysis of standby systems with working vacations and retrial of failed components pp. 46-55

Dong-Yuh Yang and Chih-Lung Tsao

Maximum likelihood and Bayesian inference for common-cause of failure model pp. 56-62

H.D. Nguyen and E. Gouno

Joint optimal checkpointing and rejuvenation policy for real-time computing tasks pp. 63-72

Gregory Levitin, Liudong Xing and Liang Luo

A new accident causation model based on information flow and its application in Tianjin Port fire and explosion accident pp. 73-85

Chao Wu and Lang Huang

Modelling and application of condition-based maintenance for a two-component system with stochastic and economic dependencies pp. 86-97

Phuc Do, Roy Assaf, Phil Scarf and Benoit Iung

The geometry of limit state function graphs and subset simulation: Counterexamples pp. 98-106

Karl Breitung

Dependability modeling and optimization of triple modular redundancy partitioning for SRAM-based FPGAs pp. 107-119

Khaza Anuarul Hoque, Otmane Ait Mohamed and Yvon Savaria

Trans-layer model learning: A hierarchical modeling strategy for real-time reliability evaluation of complex systems pp. 120-132

Zhixue Tan, Shisheng Zhong and Lin Lin

An optimal design of multi-protocol label switching networks achieving reliability requirements pp. 133-141

Yun Zhang, Zhihui Fang and Zhengguo Xu

Remaining useful life estimation for repairable multi-state components subjected to multiple maintenance actions pp. 142-151

Chinedu I. Ossai

A new reliability analysis method for load-sharing k-out-of-n: F system based on load-strength model pp. 152-165

Jianchun Zhang, Yu Zhao and Xiaobing Ma

Battery health management for small-size rotary-wing electric unmanned aerial vehicles: An efficient approach for constrained computing platforms pp. 166-178

G. Sierra, M. Orchard, K. Goebel and C. Kulkarni

Vulnerabilities and safety assurance methods in Cyber-Physical Systems: A comprehensive review pp. 179-193

Victor Bolbot, Gerasimos Theotokatos, Luminita Manuela Bujorianu, Evangelos Boulougouris and Dracos Vassalos

Directional search algorithm for hierarchical model development and selection pp. 194-207

Bo Sun and Paolo Gardoni

Deep learning-based remaining useful life estimation of bearings using multi-scale feature extraction pp. 208-218

Xiang Li, Wei Zhang and Qian Ding

Stakeholder mapping and disruption scenarios with application to resilience of a container port pp. 219-232

Ayedh Almutairi, Zachary A. Collier, Daniel Hendrickson, Palma-Oliveira, José M., Thomas L. Polmateer and James H. Lambert

Development of statistical models for improving efficiency of emergency evacuation in areas with vulnerable population pp. 233-249

Maxim A. Dulebenets, Olumide F. Abioye, Eren Erman Ozguven, Ren Moses, Walter R. Boot and Thobias Sando

Time-variant reliability analysis using the parallel subset simulation pp. 250-257

Weiqi Du, Yuanxin Luo and Yongqin Wang

Reliability and efficiency evaluation of a community pharmacy dispensing process using a coloured Petri-net approach pp. 258-268

Matthew Naybour, Rasa Remenyte-Prescott and Matthew J. Boyd

Volume 181, issue C, 2019

Extended Phase-type models for multistate competing risk systems pp. 1-16

Lirong Cui and Bei Wu

Multi-objective optimization in redundant system considering load sharing pp. 17-27

Cassio Pereira de Paula, Lais Bittencourt Visnadi and Helio Fiori de Castro

Modeling cyber-physical attacks based on stochastic game and Markov processes pp. 28-37

K.C. Lalropuia and Vandana Gupta

Moment-based evaluation of structural reliability pp. 38-45

Cao Wang, Hao Zhang and Quanwang Li

Capacity failure rate based opportunistic maintenance modeling for series-parallel multi-station manufacturing systems pp. 46-53

Xiaojun Zhou and Kailong Shi

Design for reliability for the high reliability fuze pp. 54-61

Alanna Sharp, Jose Andrade and Nicholas Ruffini

An improved particle swarm optimization algorithm for reliability-redundancy allocation problem with mixed redundancy strategy and heterogeneous components pp. 62-74

Zhiyuan Ouyang, Yu Liu, Sheng-Jia Ruan and Tao Jiang

Reliability analysis of coherent systems subject to internal failures and external shocks pp. 75-83

Xianzhen Huang, Sujun Jin, Xuefeng He and David He

The influence of interorganizational factors on offshore incidents in the Norwegian petroleum industry: Challenges and future directions pp. 84-96

Vibeke Milch and Karin Laumann

Efficient method for variance-based sensitivity analysis pp. 97-115

Xin Chen, Molina-Cristóbal, Arturo, Marin D. Guenov and Atif Riaz

Near-optimal planning using approximate dynamic programming to enhance post-hazard community resilience management pp. 116-126

Saeed Nozhati, Yugandhar Sarkale, Bruce Ellingwood, Edwin K.P. Chong and Hussam Mahmoud

A knowledge-based prognostics framework for railway track geometry degradation pp. 127-141

Chiachío, Juan, Chiachío, Manuel, Darren Prescott and John Andrews

Probabilistic models for the erosion rate in embankments and reliability analysis of earth dams pp. 142-155

Marco Andreini, Paolo Gardoni, Stefano Pagliara and Mauro Sassu

Optimal pipe inspection paths considering inspection tool limitations pp. 156-166

Thomas Ying-Jeh Chen, Seth David Guikema and Craig Michael Daly

Data-driven estimation of interdependencies and restoration of infrastructure systems pp. 167-180

Mauricio Monsalve and Juan Carlos de la Llera

A review of asset management literature on multi-asset systems pp. 181-201

Sanyapong Petchrompo and Ajith Kumar Parlikad

A study on stochastic degradation process models under different types of failure Thresholds pp. 202-212

Qinglai Dong and Lirong Cui

Volume 180, issue C, 2018

Reliability analysis of a cold-standby system considering the development stages and accumulations of failure mechanisms pp. 1-12

Ying Chen, Ze Wang, YingYi Li, Rui Kang and Ali Mosleh

A decomposition-based reliability and makespan optimization technique for hardware task graphs pp. 13-24

Reza Ramezani, Yasser Sedaghat, Mahmoud Naghibzadeh and Juan Antonio Clemente

Bayesian model averaging based reliability analysis method for monotonic degradation dataset based on inverse Gaussian process and Gamma process pp. 25-38

Di Liu, Shaoping Wang, Chao Zhang and Mileta Tomovic

Maintenance optimisation of a series production system with intermediate buffers using a multi-agent FMDP pp. 39-48

Yifan Zhou, Yiming Guo, Tian Ran Lin and Lin Ma

RM5Tree: Radial basis M5 model tree for accurate structural reliability analysis pp. 49-61

Behrooz Keshtegar and Ozgur Kisi

An effective approach for kinematic reliability analysis of steering mechanisms pp. 62-76

Lei Wang, Xufang Zhang and Yangjunjian Zhou

Towards analysing risks to public safety from wind turbines pp. 77-87

Sander R. Brouwer, Saad H.S. Al-Jibouri, Cárdenas, Ibsen Chivatá and Johannes I.M. Halman

Discussion on probability of cesium-137 release exceeding 100 TBq as a part of the consideration of nuclear power plant probabilistic risk criteria for environmental protection pp. 88-93

Kampanart Silva and Koji Okamoto

A random-effects Wiener degradation model based on accelerated failure time pp. 94-103

Qingqing Zhai, Piao Chen, Lanqing Hong and Lijuan Shen

Optimal allocation of reliability improvement target based on the failure risk and improvement cost pp. 104-110

Kyungmee O. Kim and Ming J. Zuo

Modeling patterns for reliability assessment of safety instrumented systems pp. 111-123

Huixing Meng, Kloul, Leïla and Antoine Rauzy

An integrated approach for system functional reliability assessment using Dynamic Bayesian Network and Hidden Markov Model pp. 124-135

Sinda Rebello, Hongyang Yu and Lin Ma

A holistic multi-failure mode prognosis approach for complex equipment pp. 136-151

Olivier Blancke, Antoine Tahan, Dragan Komljenovic, Normand Amyot, Lévesque, Mélanie and Claude Hudon

Using Bayesian network for safety risk analysis of diaphragm wall deflection based on field data pp. 152-167

Ying Zhou, Chenshuang Li, Cheng Zhou and Hanbin Luo

Reliability modeling for dependent competing failure processes with mutually dependent degradation process and shock process pp. 168-178

Haiyang Che, Shengkui Zeng, Jianbin Guo and Yao Wang

Maintenance optimization of series systems subject to reliability constraints pp. 179-188

R. Faddoul, W. Raphael and A. Chateauneuf

Multivariate system reliability analysis considering highly nonlinear and dependent safety events pp. 189-200

Mohammadkazem Sadoughi, Meng Li and Chao Hu

Distinguishing between model- and data-driven inferences for high reliability statistical predictions pp. 201-210

Lauren Hund, Benjamin Schroeder, Kellin Rumsey and Gabriel Huerta

Reliability analysis and functional design using Bayesian networks generated automatically by an “Idea Algebra†framework pp. 211-225

Andas Amrin, Vasileios Zarikas and Christos Spitas

Reliability evaluation of circular k-out-of-n: G balanced systems through minimal path sets pp. 226-236

Alfonsus Julanto Endharta, Won Young Yun and Young Myoung Ko

How the integration of System 1-System 2 thinking and recent risk perspectives can improve risk assessment and management pp. 237-244

Terje Aven

Stochastic corrosion growth modeling for pipelines using mass inspection data pp. 245-254

Markus R. Dann and Marc A. Maes

Vulnerability evaluation method applied to manufacturing systems pp. 255-265

Gao Guibing, Yue Wenhui, Ou Wenchu and Tang Hao

Reliability allocation model and algorithm for phased mission systems with uncertain component parameters based on importance measure pp. 266-276

Xin-yang Wu, Xiao-yue Wu and Narayanaswamy Balakrishnan

Bayesian network modelling and analysis of accident severity in waterborne transportation: A case study in China pp. 277-289

Likun Wang and Zaili Yang

Consequence-based framework for buried infrastructure systems: A Bayesian belief network model pp. 290-301

Golam Kabir, Ngandu Balekelayi Celestin Balek and Solomon Tesfamariam

Performance evaluation of seven optimization models of age replacement policy pp. 302-311

R. Jiang

Traffic accident modelling via self-exciting point processes pp. 312-320

Zhongping Li, Lirong Cui and Jianhui Chen

Resilience engineering for socio-technical risk analysis: Application in neuro-surgery pp. 321-335

Riccardo Patriarca, Andrea Falegnami, Francesco Costantino and Federico Bilotta

An asset-management oriented methodology for mine haul-fleet usage scheduling pp. 336-344

C. Nakousi, R. Pascual, A. Anani, F. Kristjanpoller and P. Lillo

Dynamic reliability modeling for system analysis under complex load pp. 345-351

Xiaoqiang Zhang, Huiying Gao, Hong-Zhong Huang, Yan-Feng Li and Jinhua Mi

Reliability assessment of phased-mission systems under random shocks pp. 352-361

Xiang-Yu Li, Yan-Feng Li, Hong-Zhong Huang and Enrico Zio

Optimal replacement policy under a general failure and repair model: Minimal versus worse than old repair pp. 362-372

Badía, F.G., M.D. Berrade, Ji Hwan Cha and Hyunju Lee

Epidemiology of helicopter accidents: Trends, rates, and covariates pp. 373-384

Jared S. Churchwell, Katherine S. Zhang and Joseph H. Saleh

Developing ladder network for intelligent evaluation system: Case of remaining useful life prediction for centrifugal pumps pp. 385-393

Rui He, Yiyang Dai, Jiachen Lu and Chuanlin Mou

Redundancy optimization of cold-standby systems under periodic inspection and maintenance pp. 394-402

Wei Wang, Zhiying Wu, Junlin Xiong and Yaofeng Xu

Assessment method of the multicomponent systems future ability to achieve productive tasks from local prognoses pp. 403-415

González, Esteban Le Maitre, Xavier Desforges and Archimè de, Bernard

A sensor selection method using a performance metric for phased missions of aircraft fuel systems pp. 416-424

J. Reeves, R. Remenyte-Prescott, J. Andrews and Paul Thorley

Failure modes, mechanisms and effect analysis on temperature redundant sensor stage pp. 425-433

M. Catelani, L. Ciani and M. Venzi

Partial monitoring of multistate systems pp. 434-452

Kristina Skutlaberg, Arne Bang Huseby and Bent Natvig

Bayesian estimation of Weibull mixture in heavily censored data setting pp. 453-462

Florence Ducros and Patrick Pamphile

Optimal periodic software rejuvenation policies based on interval reliability criteria pp. 463-475

Tadashi Dohi, Junjun Zheng, Hiroyuki Okamura and Kishor S. Trivedi

Reliability analysis of a retrial machine repair problem with warm standbys and a single server with N-policy pp. 476-486

Wu-Lin Chen and Kuo-Hsiung Wang

Quantitative Analysis of Dynamic Fault Trees by means of Monte Carlo Simulations: Event-Driven Simulation Approach pp. 487-504

Eric Gascard and Zineb Simeu-Abazi