Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 141, issue C, 2015

Four concepts for resilience and the implications for the future of resilience engineering pp. 5-9

David D. Woods

Modelling Vessel Traffic Service to understand resilience in everyday operations pp. 10-21

Gesa Praetorius, Erik Hollnagel and Joakim Dahlman

Systemic resilience model pp. 22-32

Jonas Lundberg and Johansson, Björn Je

ADAPTER: Analysing and developing adaptability and performance in teams to enhance resilience pp. 33-44

Dolf van der Beek and Jan Maarten Schraagen

Resilience and precarious success pp. 45-53

Mary D Patterson and Robert L Wears

The role of dynamic trade-offs in creating safety—A qualitative study of handover across care boundaries in emergency care pp. 54-62

Mark Sujan, Peter Spurgeon and Matthew Cooke

A practitioner’s experiences operationalizing Resilience Engineering pp. 63-73

E. Lay, M. Branlat and Z. Woods

Resilience assessment of interdependent infrastructure systems: With a focus on joint restoration modeling and analysis pp. 74-82

Min Ouyang and Zhenghua Wang

Factors underlying organizational resilience: The case of electric power restoration in New York City after 11 September 2001 pp. 83-91

Mendonça, David and William A. Wallace

Resilience framework for critical infrastructures: An empirical study in a nuclear plant pp. 92-105

Leire Labaka, Josune Hernantes and Jose M. Sarriegi

Safety culture and subcontractor network governance in a complex safety critical project pp. 106-114

Pia Oedewald and Nadezhda Gotcheva

Towards understanding work-as-done in air traffic management safety assessment and design pp. 115-130

Rogier Woltjer, Ella Pinska-Chauvin, Tom Laursen and Billy Josefsson

On the rationale of resilience in the domain of safety: A literature review pp. 131-141

Bergström, Johan, Roel van Winsen and Eder Henriqson

A systematic literature review of resilience engineering: Research areas and a research agenda proposal pp. 142-152

Angela Weber Righi, Tarcisio Abreu Saurin and Priscila Wachs

Volume 140, issue C, 2015

Time and cost constrained optimal designs of constant-stress and step-stress accelerated life tests pp. 1-14

David Han

Cost benefits of postponing time-based maintenance under lifetime distribution uncertainty pp. 15-21

Bram de Jonge, Arjan S. Dijkstra and Ward Romeijnders

A modeling framework for deteriorating control system and predictive maintenance of actuators pp. 22-36

Y. Langeron, A. Grall and A. Barros

The risk of an air accident as a result of a serious incident of the hybrid type pp. 37-52

Jacek Skorupski

Extending minimal repair models for repairable systems: A comparison of dynamic and heterogeneous extensions of a nonhomogeneous Poisson process pp. 53-58

Zeytu Gashaw Asfaw and Bo Henry Lindqvist

Model validation and calibration based on component functions of model output pp. 59-70

Danqing Wu, Zhenzhou Lu, Yanping Wang and Lei Cheng

Dynamic assessment of multi-state systems using phase-type modeling pp. 71-77

Serkan Eryilmaz

Optimal preventive maintenance and repair policies for multi-state systems pp. 78-87

Shey-Huei Sheu, Chin-Chih Chang, Yen-Luan Chen and Zhe George Zhang

A random-effects model for long-term degradation analysis of solid oxide fuel cells pp. 88-98

Maurizio Guida, Fabio Postiglione and Gianpaolo Pulcini

Bootstrap method for characterizing the effect of uncertainty in shear strength parameters on slope reliability pp. 99-106

Dian-Qing Li, Xiao-Song Tang and Kok-Kwang Phoon

ARA and ARI imperfect repair models: Estimation, goodness-of-fit and reliability prediction pp. 107-115

Toledo, Maria Luíza Guerra de, Marta A. Freitas, Enrico A. Colosimo and Gustavo L. Gilardoni

On the allegations that small risks are treated out of proportion to their importance pp. 116-121

Terje Aven

Mission reliability of semi-Markov systems under generalized operational time requirements pp. 122-129

Xiaoyue Wu and Jane Hillston

Pivotal decomposition for reliability analysis of fault tolerant control systems on unmanned aerial vehicles pp. 130-141

Bin Hu and Peter Seiler

The STABALID project: Risk analysis of stationary Li-ion batteries for power system applications pp. 142-175

F.J. Soares, L. Carvalho, I.C. Costa, J.P. Iria, J.-M. Bodet, G. Jacinto, A. Lecocq, J. Roessner, B. Caillard and O. Salvi

A general modeling method for opportunistic maintenance modeling of multi-unit systems pp. 176-190

Xiaohong Zhang and Jianchao Zeng

Comparison of modeling formalisms for Safety Analyses: SAML and AltaRica pp. 191-199

Michael Lipaczewski, Frank Ortmeier, Tatiana Prosvirnova, Antoine Rauzy and Simon Struck

The development of safety cases for healthcare services: Practical experiences, opportunities and challenges pp. 200-207

Mark Sujan, Peter Spurgeon, Matthew Cooke, Andy Weale, Philip Debenham and Steve Cross

Optimization of reliability centered predictive maintenance scheme for inertial navigation system pp. 208-217

Xiuhong Jiang, Fuhai Duan, Heng Tian and Xuedong Wei

Volume 139, issue C, 2015

Bayesian belief networks for human reliability analysis: A review of applications and gaps pp. 1-16

L. Mkrtchyan, L. Podofillini and V.N. Dang

A Simulator for Human Error Probability Analysis (SHERPA) pp. 17-32

Valentina Di Pasquale, Salvatore Miranda, Raffaele Iannone and Stefano Riemma

An extended optimal replacement model for a deteriorating system with inspections pp. 33-49

Shey-Huei Sheu, Hsin-Nan Tsai, Fu-Kwun Wang and Zhe George Zhang

Reliability model for helicopter main gearbox lubrication system using influence diagrams pp. 50-57

H.S.J. Rashid, C.S. Place, D. Mba, R.L.C. Keong, A. Healey, W. Kleine-Beek and M. Romano

A new class of Wiener process models for degradation analysis pp. 58-67

Zhi-Sheng Ye, Nan Chen and Yan Shen

A multistage framework for reliability-based distribution expansion planning considering distributed generations by a self-adaptive global-based harmony search algorithm pp. 68-81

Mojtaba Shivaie, Mohammad T. Ameli, Mohammad S. Sepasian, Philip D. Weinsier and Vahid Vahidinasab

Risk-based fault detection using Self-Organizing Map pp. 82-96

Hongyang Yu, Faisal Khan and Vikram Garaniya

A stochastic alternating renewal process model for unavailability analysis of standby safety equipment pp. 97-104

J.A.M. van der Weide and Mahesh D. Pandey

Estimation of the lifetime distribution of mechatronic systems in the presence of a covariate: A comparison among parametric, semiparametric and nonparametric models pp. 105-112

Sebastian Bobrowski, Hong Chen, Döring, Maik, Uwe Jensen and Schinköthe, Wolfgang

An application of the value tree analysis methodology within the integrated risk informed decision making for the nuclear facilities pp. 113-119

Borysiewicz, Mieczysław, Karol Kowal and Potempski, Sławomir

Verifying large modular systems using iterative abstraction refinement pp. 120-130

Jussi Lahtinen, Tuomas Kuismin and Keijo Heljanko

Ageing PSA incorporating effectiveness of maintenance and testing pp. 131-140

Martón, I., Sánchez, A.I. and S. Martorell

Fire as a primary event of accident domino sequences: The case of BLEVE pp. 141-148

Behrouz Hemmatian, Eulà lia Planas and Joaquim Casal

Environmental stress screening modelling, analysis and optimization pp. 149-155

Ji Hwan Cha and Maxim Finkelstein

A survey of approaches combining safety and security for industrial control systems pp. 156-178

Siwar Kriaa, Ludovic Pietre-Cambacedes, Marc Bouissou and Yoran Halgand

Automated generation of partial Markov chain from high level descriptions pp. 179-187

P.-A. Brameret, A. Rauzy and J.-M. Roussel

A risk-based method for planning of bus–subway corridor evacuation under hybrid uncertainties pp. 188-199

Y. Lv, X.D. Yan, W. Sun and Z.Y. Gao