Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 202, issue C, 2020

Analysis of network cascading failure based on the cluster aggregation in cyber-physical systems

Chao Zhang, Xin Xu and Hongyan Dui

The development of a next-generation human reliability analysis: Systems analysis for formal pharmaceutical human reliability (SAFPHâ–ª)

Xi Zheng, Matthew L. Bolton, Christopher Daly and Elliot Biltekoff

Could pool fire alone cause a domino effect?

Ruochen Yang, Faisal Khan, Eugenio Turco Neto, Riza Rusli and Jie Ji

Multi-variate and single-variable flood fragility and loss approaches for buildings

Omar M. Nofal, John W. van de Lindt and Trung Q. Do

Semi-quantitative application to the Functional Resonance Analysis Method for supporting safety management in a complex health-care process

Gulsum Kubra Kaya and Mehmet Fatih Hocaoglu

A degradation modeling and reliability estimation method based on Wiener process and evidential variable

Di Liu and Shaoping Wang

A source term binning methodology for multi-unit consequence analyses

Wonjong Song, Sunghyun Park, Yein Seo and Moosung Jae

Reliability analysis of a multi-component machining system with service interruption, imperfect coverage, and reboot

Pankaj Kumar and Madhu Jain

Harmonisation of surveillance requirements and maintenance in a context of ageing and obsolescence based on reliability, availability and risk information

S. Martorell, Martón, I., Sánchez, A. and S. Carlos

Joint maintenance and spare parts inventory optimization for multi-unit systems considering imperfect maintenance actions

Tao Yan, Yaguo Lei, Biao Wang, Tianyu Han, Xiaosheng Si and Naipeng Li

Jointly optimizing lot sizing and maintenance policy for a production system with two failure modes

Kaiye Gao, Rui Peng, Li Qu and Shaomin Wu

A standard-based approach for multi-criteria performance evaluation of engineered systems

R. Jiang and Zhigao Chen

Introduction to formal concept analysis and its applications in reliability engineering

Claudio M. Rocco, Elvis Hernandez-Perdomo and Johnathan Mun

Performability analysis of multi-state sliding window systems

Yuchang Mo, Liudong Xing, Lejun Zhang and Shaobin Cai

Short-term supply reliability assessment of a gas pipeline system under demand variations

Qian Chen, Lili Zuo, Changchun Wu, Yaran Bu, Yifei Lu, Yanfei Huang and Feng Chen

Reliability analysis of systems considering clusters of dependent degrading components

Nooshin Yousefi, David W. Coit and Sanling Song

Cost benefit analysis of four retrial systems with warm standby units and imperfect coverage

Tseng-Chang Yen and Kuo-Hsiung Wang

Considering the human operator cognitive process for the interpretation of diagnostic outcomes related to component failures and cyber security attacks

Wei Wang, Francesco Di Maio and Enrico Zio

Surrogate modeling based on resampled polynomial chaos expansions

Zicheng Liu, Dominique Lesselier, Bruno Sudret and Joe Wiart

Probabilistic inspection planning of offshore welds subject to the transition from protected to corrosive environment

Ruiz Muñoz, G.A. and Sørensen, J.D.

TTT-SiZer: A graphic tool for aging trends recognition

Gámiz, Maria Luz, Nozal-Cañadas, Rafael and Raya-Miranda, Rocío

Algorithms for Bayesian network modeling and reliability inference of complex multistate systems: Part I – Independent systems

Xiaohu Zheng, Wen Yao, Yingchun Xu and Xiaoqian Chen

A framework for the resilience analysis of electric infrastructure systems including temporary generation systems

Shahaboddin Sean H. Toroghi and Valerie M. Thomas

Active sparse polynomial chaos expansion for system reliability analysis

Yicheng Zhou, Zhenzhou Lu and Wanying Yun

Multi-State System Modeling and Reliability Assessment for Groups of High-speed Train Wheels

Zhexiang Chi, Ruoran Chen, Simin Huang, Yan-Fu Li, Bin Zhou and Wenjuan Zhang

Mission abort and rescue for multistate systems operating under the Poisson process of shocks

Gregory Levitin, Maxim Finkelstein and Yuanshun Dai

A practical application of NUREG/CR-6430 software safety hazard analysis to FPGA software

Sejin Jung, Junbeom Yoo and Young-Jun Lee

Probability damage calculation of building targets under the missile warhead strike

Cheng-lin Zhai and Xiao-wei Chen

Prognosticating RULs while exploiting the future characteristics of operating profiles

Amit Kumar Jain and Bhupesh Kumar Lad

Accident diagnosis algorithm with untrained accident identification during power-increasing operation

Jaemin Yang and Jonghyun Kim

Performance shaping factors dependence assessment through moderating and mediating effect analysis

Lijing Wang, Yanlong Wang, Yingchun Chen, Xing Pan and Wenjin Zhang

Resilience Measure of Network Systems by Node and Edge Indicators

Chao Zhang, Xin Xu and Hongyan Dui

Analytical reliability estimation of SRAM-based FPGA designs against single-bit and multiple-cell upsets

Reza Ramezani, Juan Antonio Clemente and Francisco J. Franco

Optimal Product Substitution and Dual Sourcing Strategy considering Reliability of Production Lines

Di Wu, Min Gong, Rui Peng, Xiangbin Yan and Shaomin Wu

Semi-parametric Bayesian models for heterogeneous degradation data: An application to laser data

Cristiano C. Santos and Rosangela H. Loschi

Formulation of A Risk Assessment Framework Capable of Analyzing Nuclear Power Multiunit Accident Scenarios

Yinan Cai and Michael W. Golay

A novel data mining approach for analysis of accident paths and performance assessment of risk control systems

Kritika Singh and J Maiti

Condition-based maintenance optimization for multi-component systems subject to a system reliability requirement

Yue Shi, Weihang Zhu, Yisha Xiang and Qianmei Feng

A data-based comparison of BN-HRA models in assessing human error probability: An offshore evacuation case study

Shokoufeh Abrishami, Nima Khakzad and Seyed Mahmoud Hosseini

Performance evaluation of nitrogen for fire safety application in aircraft

A. Dinesh, C.M. Benson, P.G. Holborn, S. Sampath and Y. Xiong

A real time methodology of cluster-system theory-based reliability estimation using k-means clustering

Wei Cai, Jingyi Zhao and Ming Zhu

Joint optimization of opportunistic maintenance and production scheduling considering batch production mode and varying operational conditions

Lei Xiao, Xinghui Zhang, Junxuan Tang and Yaqin Zhou

Multi-scale deep intra-class transfer learning for bearing fault diagnosis

Xu Wang, Changqing Shen, Min Xia, Dong Wang, Jun Zhu and Zhongkui Zhu

Reliability evaluation of Markov renewal shock models with multiple failure mechanisms

Bei Wu and Lirong Cui

An integrated assessment of safety and efficiency of aircraft maintenance strategies using agent-based modelling and stochastic Petri nets

Juseong Lee and Mihaela Mitici

Bayesian Network Modelling for the Wind Energy Industry: An Overview

Tosin Adedipe, Mahmood Shafiee and Enrico Zio

Mobility-aware load Balancing for Reliable Self-Organization Networks: Multi-agent Deep Reinforcement Learning

Amin Mohajer, Maryam Bavaghar and Hamid Farrokhi

Component-based system reliability subject to positive and negative correlation

Bentolhoda Jafary, Andrew Mele and Lance Fiondella

Risk state changes analysis of railway dangerous goods transportation system: Based on the cusp catastrophe model

Wencheng Huang, Rui Zhang, Minhao Xu, Yaocheng Yu, Yifei Xu and Gatesi Jean De Dieu

An enhanced vehicle control model for assessing highly automated driving safety

Helen E. Monkhouse, Ibrahim Habli and John McDermid

Risk-based maintenance planning of offshore wind turbine farms

B. Yeter, Y. Garbatov and C. Guedes Soares

Postponed maintenance scheduling integrating state variation and environmental impact

Zihan Zhang and Li Yang

Integrated Stateflow-based simulation modelling and testability evaluation for electronic built-in-test (BIT) systems

Junyou Shi, Qingjie He and Zili Wang

Joint optimization of safety barriers for enhancing business continuity of nuclear power plants against steam generator tube ruptures accidents

Jinduo Xing, Zhiguo Zeng and Enrico Zio