|
|
Reliability Engineering and System Safety
2005 - 2025
Current editor(s): Carlos Guedes Soares From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 254, issue PA, 2025
- Team-centered IDAC: Modeling and simulation of operating crew in complex systems - Part 2: Simulation aspects and application

- Mandana Azarkhil, Ali Mosleh and Marilia Ramos
- Team-centered IDAC: Modeling and simulation of operating crew in complex systems – Part 1: Team model and fundamentals

- Mandana Azarkhil, Ali Mosleh and Marilia Ramos
- A historical survey of condition-based maintenance models with imperfect inspections: Cases of constant and non-constant probabilities of inspection outcomes

- Vladimir Ulansky and Ahmed Raza
- A multi-stage stochastic programming model for multi-mission selective maintenance optimization

- Milad Ghorbani, Mustapha Nourelfath and Michel Gendreau
- Machine learning-based outlier detection for pipeline in-line inspection data

- Muhammad Hussain and Tieling Zhang
- Self-adaptive fault diagnosis for unseen working conditions based on digital twins and domain generalization

- Mehdi Saman Azari, Stefania Santini, Farid Edrisi and Francesco Flammini
- A human reliability analysis method based on STPA-IDAC and BN-SLIM for driver take-over in Level 3 automated driving

- Wenyi Liao, Yidan Qiao, Tongxin Dong, Zhiming Gou and Dengkai Chen
- Damage-driven framework for reliability assessment of steam turbine rotors operating under flexible conditions

- Hang-Hang Gu, Run-Zi Wang, Kun Zhang, Kai-Shang Li, Li Sun, Xian-Cheng Zhang and Shan-Tung Tu
- Systematic review and future perspectives on cascading failures in Internet of Things: Modeling and optimization

- Xiuwen Fu, Dingyi Zheng, Xiangwei Liu, Liudong Xing and Rui Peng
- A reliability analysis method for evaluating performance degradation considering the coupling of multiple progressive damage factors and multiple stochastic factors

- Jiang Deyin, Gao Zhixuan, Wang Keke, Jiang Senke, Cui Weimin and Bifeng Song
- Seismic risk estimates for reinforced concrete structures with incorporation of corrosion and aftershock

- Zhou Zhou, Xiaohui Yu, Paolo Gardoni, Kun Ji and Dagang Lu
- Advancing spacecraft safety and longevity: A review of guided waves-based structural health monitoring

- Sunquan Yu, Kai Luo, Chengguang Fan, Kangjia Fu, Xuesong Wu, Yong Chen and Xiang Zhang
- Maximum entropy-based modeling of community-level hazard responses for civil infrastructures

- Xiaolei Chu and Ziqi Wang
- Reliability analysis of load-sharing system with the common-cause failure based on GO-FLOW method

- Jingkui Li, Hanzheng Wang, Yunqi Tang, Zhandong Li and Xiuhong Jiang
- Sparse graph structure fusion convolutional network for machinery remaining useful life prediction

- Lingli Cui, Qiang Shen, Yongchang Xiao, Dongdong Liu and Huaqing Wang
- Urban natural gas pipeline operational vulnerability under the influence of a social spatial distribution structure: A case study of the safety risk patterns in Kunming, China

- Jiarui Xu, Chunhou Ji, Lihong Yang, Yun Liu, Zhiqiang Xie, Xingfeng Fu, Fengshan Jiang, Mengfan Liao and Lei Zhao
- On fractional moment estimation from polynomial chaos expansion

- Novák, Lukáš, Marcos Valdebenito and Matthias Faes
- Explicit speed-integrated LSTM network for non-stationary gearbox vibration representation and fault detection under varying speed conditions

- Yuejian Chen, Xuemei Liu, Meng Rao, Yong Qin, Zhipeng Wang and Yuanjin Ji
- Label-guided contrastive learning with weighted pseudo-labeling: A novel mechanical fault diagnosis method with insufficient annotated data

- Xinyu Li, Changming Cheng and Zhike Peng
- Reliability evaluation for a multi-commodity multi-state distribution network under transportation emission consideration

- Yi-Feng Niu, Jun-Feng Wang, Xiu-Zhen Xu and Qian-Xin Xu
- Reliability-constrained configuration optimization for integrated power and natural gas energy systems: A stochastic approach

- Mostafa Shabanian-Poodeh, Rahmat-Allah Hooshmand and Miadreza Shafie-khah
- Investigation of essential parameters for the design of offshore wind turbine based on structural reliability

- Fucheng Han, Wenhua Wang, Xiao-Wei Zheng, Xu Han, Wei Shi and Xin Li
- A novel two-stage method via adversarial strategy for remaining useful life prediction of bearings under variable conditions

- Yang Liu, Guangda Zhou, Shujian Zhao, Liang Li, Wenhua Xie, Bengan Su, Yongwei Li and Zhen Zhao
- A multi-phase mission success evaluation approach for maritime autonomous surface ships considering equipment performance degradation and system composition changes

- Xiaofang Luo, Linghui Guo, Xu Bai, Yushan Li, Yingfei Zan and Jiaxuan Luo
- Toward the resilience of UAV swarms with percolation theory under attacks

- Tianzhen Hu, Yan Zong, Ningyun Lu and Bin Jiang
- Preventive maintenance strategy for multi-component systems in dynamic risk assessment

- Chengjie Zhang, Zhigeng Fang and Wenjie Dong
- Employing the cluster of node cut sets to improve the robustness of the network measured by connectivity

- Wei Wei, Guobin Sun, Peng Li and Qinghui Zhang
- Health management of power batteries in low temperatures based on Adaptive Transfer Enformer framework

- Bingyang Chen, Xingjie Zeng, Chao Liu, Yafei Xu and Heling Cao
- A new reliability health status assessment model for complex systems based on belief rule base

- Mingyuan Liu, Wei He, Ning Ma, Hailong Zhu and Guohui Zhou
- A resilience-driven emergency maintenance operation scheme optimization method based on risk

- Yanping Zhang, Baoping Cai, Salim Ahmed, Chengyushu Wang, Qingping Li and Lei Gao
- Corrigendum to “A closed-form continuous-depth neural-based hybrid difference features re-representation network for RUL prediction†[Reliability Engineering & System Safety 253C (2024) 110540]

- Xuanlin Li, Yawei Hu, Hang Wang, Yongbin Liu, Xianzeng Liu and Huitian Lu
Volume 253, issue C, 2025
- Corrigendum to “Deep Koopman Operator-based degradation modelling†[Reliability Engineering and System Safety volume 251 (2024) 110351]

- Sergei Garmaev and Olga Fink
- Dual-drive RUL prediction of gear transmission systems based on dynamic model and unsupervised domain adaption under zero sample

- Yaoyao Han, Xiaoxi Ding, Fengshou Gu, Xiaohui Chen and Minmin Xu
- Changes in the equilibrium of the urban transport system of a large city following an urban flood

- Borowska-Stefańska, Marta, Adam Bartnik, Maxim A. Dulebenets, Kowalski, Michał, Alireza Sahebgharani, Tomalski, Przemysław and Wiśniewski, Szymon
- A distribution-free method for reliability improvement based on design of experiments

- Shanshan Lv, Ziyi Sun, Cong Cheng and Guodong Wang
- Comparative analysis of offshore wind turbine blade maintenance: RL-based and classical strategies for sustainable approach

- Andrie Pasca Hendradewa and Shen Yin
- Corrigendum to “The loose slipper fault diagnosis of variable-displacement pumps under time-varying operating conditions†[Volume 252, December 2024, RESS 110448]

- Xinlei Xu, Junhui Zhang, Weidi Huang, Bin Yu, Fei Lyu, Xiaolong Zhang and Bing Xu
- A new hybrid inverse reliability method for searching MPTP and its application in reliability-based design optimization

- Xiongming Lai, Tao Yang, Yong Zhang, Cheng Wang, Shuirong Liao, Xianbiao Zeng and Xiaodong Zhang
- Cascading failure model and resilience-based sequential recovery strategy for complex networks

- Xudan Song, Pengcheng Zhao, Rongrong Yin, Yunxiao Zu and Yong Zhang
- Systems driven intelligent decision support methods for ship collision and grounding prevention: Present status, possible solutions, and challenges

- Mingyang Zhang, Ghalib Taimuri, Jinfen Zhang, Di Zhang, Xinping Yan, Pentti Kujala and Spyros Hirdaris
- Joint optimization of production, inspection, and maintenance under finite time for smart manufacturing systems

- Xiaolei Lv, Liangxing Shi, Yingdong He and Zhen He
- A reliability-based design optimization strategy using quantile surrogates by improved PC-kriging

- Junhua Chen, Zhiqun Chen, Wei Jiang, Hun Guo and Longmiao Chen
- An improved industrial fault diagnosis model by integrating enhanced variational mode decomposition with sparse process monitoring method

- Jiaxin Zhang, Gade Pandu Rangaiah, Lichun Dong and Lakshminarayanan Samavedham
- A physical‒data-driven combined strategy for load identification of tire type rail transit vehicle

- Yuanjin Ji, Youpei Huang, Junwei Zeng, Lihui Ren and Yuejian Chen
- Operational reliability assessment of complex mechanical systems with multiple failure modes: An adaptive decomposition-synchronous-coordination approach

- Jiaqi Liu, Yunwen Feng, Cheng Lu and Chengwei Fei
- Reliability analysis of dynamic fault trees with Priority-AND gates using conditional binary decision diagrams

- Siwei Zhou, Zhao Li and Jianwen Xiang
- Estimating the all-terminal signatures for networks by using deep neural network

- Gaofeng Da, Xin Zhang, Zhenwen He and Weiyong Ding
- Modeling and analysis of cascading failures in multilayer higher-order networks

- Cheng Qian, Dandan Zhao, Ming Zhong, Hao Peng and Wei Wang
- Integrated optimization for X-bar control chart, preventive maintenance and production rate

- Yaping Li, Zhen Chen, Tangbin Xia, Ershun Pan and Sifeng Liu
- A study of neural network-based evaluation methods for pipelines with multiple corrosive regions

- Zhiwei Zhang, Songling Li, Huajie Wang, Hongliang Qian, Changqing Gong, Qiongyao Wu and Feng Fan
- A framework for post-windstorm functional recovery of non-residential buildings applied to hospitals

- Ali Merhi, Brandon Andow, Hector Cruzado, Chris Letchford and Frank Lombardo
- Standby and inspection policy optimization in systems exposed to common and operational shock processes

- Gregory Levitin, Liudong Xing and Yuanshun Dai
- Adaptive support vector machine for time-variant failure probability function estimation

- Weiming Zheng, Xiukai Yuan, Xiya Bao and Yiwei Dong
- A novel cross-entropy-based importance sampling method for cumulative time-dependent failure probability function

- Yixin Lu and Zhenzhou Lu
- Tensile capacity degradation of randomly corroded strands based on a refined numerical model

- Zhongwei Zhao, Wuyang Wang, Renzhang Yan and Bingzhen Zhao
- A benchmark on uncertainty quantification for deep learning prognostics

- Luis Basora, Arthur Viens, Manuel Arias Chao and Xavier Olive
- Resilience evaluation of train control on-board system considering component failure correlations: Based on Apriori-Multi Layer-Copula Bayesian Network model

- Yaocheng Yu, Bin Shuai and Wencheng Huang
- Physics-based digital twin updating and twin-based explainable crack identification of mechanical lap joint

- Wongon Kim and Byeng D. Youn
- A robust source-free unsupervised domain adaptation method based on uncertainty measure and adaptive calibration for rotating machinery fault diagnosis

- Yanzhuo Lin, Yu Wang, Mingquan Zhang and Ming Zhao
- A comprehensive framework for estimating the remaining useful life of Li-ion batteries under limited data conditions with no temporal identifier

- Camilo Lopez-Salazar, Stephen Ekwaro-Osire, Shweta Dabetwar and Fisseha Alemayehu
- A hybrid dual-frequency-informed spider net for RUL prognosis with adaptive IDP detection and outlier correction

- Qichao Yang, Baoping Tang, Lei Deng, Xiaolong Zhang and Jinzhou Wu
- Efficient risk-based inspection framework: Balancing safety and budgetary constraints

- Y. Javid
- Stochastic two-stage multi-objective unit commitment of distributed resource energy systems considering uncertainties and unit failures

- Jingfan Liu and Shijie Zhang
- Time-evolving traffic resilience performance forecasting during hazardous weather toward proactive intervention

- Kaisen Yao, Larry Chen and Suren Chen
- An agent-based framework for resilience analysis of service networks

- Sunyue Geng and Sifeng Liu
- Reliability modeling of multi-state phased mission systems with random phase durations and dynamic combined phases

- Xiang-Yu Li, He Li, Xiaoyan Xiong, Mingwei Li, Mohammad Yazdi and Esmaeil Zarei
- Spatial network disintegration based on spatial coverage

- Ye Deng, Zhigang Wang, Yu Xiao, Xiaoda Shen, Kurths, Jürgen and Jun Wu
- Resilience assessment of FPSO leakage emergency response based on quantitative FRAM

- Jianxing Yu, Qingze Zeng, Yang Yu, Baolei Zhang, Wentao Ma, Shibo Wu, Hongyu Ding and Zhenmian Li
- Assessment on resilience of urban agglomeration transportation system considering passenger choice and load-capacity factor

- Zhicheng Yang, Xiaobing Liu, Jiangfeng Wang, Xuedong Yan, Rui Shen and Zhengqi Huo
- Quantitative risk assessment for connected automated Vehicles: Integrating improved STPA-SafeSec and Bayesian network

- Qi Liu, Ke Sun, Wenqi Liu, Yufeng Li, Xiangyu Zheng, Chenhong Cao, Jiangtao Li and Wutao Qin
- Increasing the available water diversion volume of water source project through flood resource utilization: A case study of the middle route of the South-to-North water diversion project in China

- Xiaoqi Zhang, Han Yang, Jijun Xu, Yongqiang Wang, Pan Liu and Chong-Yu Xu
- A multi-valued decision diagrams-based method for reliability analysis of performance-sharing k-out-of-n: G system considering component degradation

- Tianyuan Zhang, Liudong Xing and Yuchang Mo
- A Monte Carlo-based modeling method for the spatial-temporal evolution process of multi-hazard and higher-order domino effect

- Weikai Ma, Yanfu Wang, Peijie Xing and Ming Yang
- An energy IoT-driven multi-dimension resilience methodology of smart microgrids

- Hongyan Dui, Heyuan Li, Xinghui Dong and Shaomin Wu
- Contrastive domain-invariant generalization for remaining useful life prediction under diverse conditions and fault modes

- Xiaoqi Xiao, Jianguo Zhang and Dan Xu
- Assessment of corrosion probability of steel in mortars using machine learning

- Haodong Ji, Yuhui Lyu, Zushi Tian and Hailong Ye
- A new active learning surrogate model for time- and space-dependent system reliability analysis

- Hongyou Zhan and Ning-Cong Xiao
- Probability density estimation of polynomial chaos and its application in structural reliability analysis

- Ye-Yao Weng, Teng Liu, Xuan-Yi Zhang and Yan-Gang Zhao
- A dynamic importance function for accidental scenarios generation by RESTART in the computational risk assessment of cyber-physical infrastructures

- Juan-Pablo Futalef, Francesco Di Maio and Enrico Zio
- Domain correction for hydraulic internal pump leakage detection considering multiclass aberrant flow data

- Xirui Chen and Hui Liu
- A closed-form continuous-depth neural-based hybrid difference features re-representation network for RUL prediction

- Xuanlin Li, Yawei Hu, Hang Wang, Yongbin Liu, Xianzeng Liu and Huitian Lu
- Hierarchical structure-based model for importance and reliability assessment of water distribution networks

- Haiming Jiao, Zhen Hu, Zhijiang Yang, Wen Zeng, Feng Xu and Cuiyan Han
- Kinematic calibration of industrial robot using Bayesian modeling framework

- Dequan Zhang, Hongyi Liang, Xing-ao Li, Xinyu Jia and Fang Wang
- Resilience-Based Restoration Model for Optimizing Corrosion Repair Strategies in Tunnel Lining

- Qian Zhang, Yaoqi Nie, Yanliang Du, Weigang Zhao and Shujie Cao
- Letting losses be lessons: Human-machine cooperation in maritime transport

- Shiqi Fan, Kun Shi, Jinxian Weng and Zaili Yang
- Digital twin-enhanced opportunistic maintenance of smart microgrids based on the risk importance measure

- Hongyan Dui, Songru Zhang, Xinghui Dong and Shaomin Wu
- Fisher-informed continual learning for remaining useful life prediction of machining tools under varying operating conditions

- Gyeongho Kim, Yun Seok Kang, Sang Min Yang, Jae Gyeong Choi, Gahyun Hwang, Hyung Wook Park and Sunghoon Lim
- Probabilistic risk assessment of civil aircraft associated failures under condition-based maintenance

- Yuanyuan Guo, Youchao Sun, Qingmin Si, Xinyao Guo and Nongtian Chen
- Rapid computation of survival signature for dynamic fault tree based on sequential binary decision diagram and multidimensional array

- Shaoxuan Wang, Daochuan Ge, Nuo Yong, Ming Sun, Yuantao Yao, Longlong Tao, Dongqin Xia, Feipeng Wang and Jie Yu
- Wind turbine fault detection and identification via self-attention-based dynamic graph representation learning and variable-level normalizing flow

- Yunyi Zhu, Bin Xie, Anqi Wang and Zheng Qian
- Reliability analysis for running safety of vehicle on slab track via an improved second-order fourth-moment approach

- Ping Lou, Tao Shi and T.Y. Yang
- A sound-vibration physical-information fusion constraint-guided deep learning method for rolling bearing fault diagnosis

- You Keshun, Wang Puzhou, Huang Peng and Gu Yingkui
- Sinkhorn divergence-based contrast domain adaptation for remaining useful life prediction of rolling bearings under multiple operating conditions

- Yan Han, Ailin Hu, Qingqing Huang, Yan Zhang, Zhichao Lin and Jinghua Ma
- Improving port state control through a transfer learning-enhanced XGBoost model

- Ruihan Wang, Mingyang Zhang, Fuzhong Gong, Shaohan Wang and Ran Yan
- An ontology-based multi-hazard coupling accidents simulation and deduction system for underground utility tunnel - A case study of earthquake-induced disaster chain

- Yin Gu, Chenyang Wang, Yi Liu and Rui Zhou
- Resilience evaluation of multi-feature system based on hidden Markov model

- Jiaying Liu, Jun Zhang, Qingfeng Tian and Bei Wu
- Prediction model optimization of gas turbine remaining useful life based on transfer learning and simultaneous distillation pruning algorithm

- Yu Zheng, Liang Chen, Xiangyu Bao, Fei Zhao, Jingshu Zhong and Chenhan Wang
- SRSGCN: A novel multi-sensor fault diagnosis method for hydraulic axial piston pump with limited data

- Pengfei Liang, Xiangfeng Wang, Chao Ai, Dongming Hou and Siyuan Liu
- Dynamic risk assessment for process operational safety based on reachability analysis

- Yuchen Wang, Zuzhen Ji, Yi Cao and Shuang-Hua Yang
- Exploring key factors for long-term vessel incident risk prediction

- Tianyi Chen, Hua Wang, Yutong Cai, Maohan Liang and Qiang Meng
- Failure time analysis for compound degradation procedures involving linear path and negative jumps

- Shihao Cao, Zhihua Wang, Qiong Wu, Xiangmin Ouyang, Xiaosheng Si and Chengrui Liu
- A bearing fault data augmentation method based on hybrid-diversity loss diffusion model and parameter transfer

- Yuan Wei, Zhijun Xiao, Xiangyan Chen, Xiaohui Gu and Schrö der, Kai-Uwe
- Fault Impulse Inference and Cyclostationary Approximation: A feature-interpretable intelligent fault detection method for few-shot unsupervised domain adaptation

- Qing Zhang, Shaochen Li, Tan Chin-Hon, Xiaofei Liu, Jingyuan Shen, Tielin Shi and Jianping Xuan
- An integrated method of extended STPA and BN for safety assessment of man-machine phased-mission system

- Xin Lu, Shengkui Zeng, Jianbin Guo, Wei Deng, Mingjun He and Haiyang Che
- A novel reinforcement learning agent for rotating machinery fault diagnosis with data augmentation

- Zhenning Li, Hongkai Jiang and Xin Wang
- Generalized zero-sample industrial fault diagnosis with domain bias

- Li Cai, Xuanhong Deng, Hongpeng Yin, Jingdong Lin and Yan Qin
- DNN-metamodeling and fragility estimate of high-rise buildings with outrigger systems subject to seismic loads

- Lili Xing, Paolo Gardoni, Ying Zhou and Peng Zhang
- Timeliness-oriented rush repair optimization of workforce scheduling and routing for logically complex systems under uncertainty

- Xinhao Cui, Bo Li, Shitao Wang, Siyue Zhang, Xue Yang, Yi Ren and Yiyong Xiao
- Uncertainty-based multi-objective optimization in twin tunnel design considering fluid-solid coupling

- Pengfei Qu and Limao Zhang
- Emergency evacuation risk assessment for toxic gas attacks in airport terminals: Model, algorithm, and application

- Tianyi Luan, Wenmei Gai, Diange Sun and Hao Dong
- Research on scenario extrapolation and emergency decision-making for fire and explosion accidents at university laboratories based on BN-CBR

- Jie Liu, Fei Cai, Wanqing Wang, Haoyuan Zhu, Liangyun Teng, Xuehua Luo, Yi Chen and Chenwei Hao
- Remaining useful life prediction of nuclear reactor control rod drive mechanism based on dynamic temporal convolutional network

- Chen Wang, Liming Zhang, Ling Chen, Tian Tan and Cong Zhang
- Efficient reliability analysis of generalized k-out-of-n phased-mission systems

- Guizhuang Chen, Yuliang Hu, Chaonan Wang, Zhitao Wu, Wenjing Rong and Quanlong Guan
- PLIC-FSR-SYS: System reliability analysis based on parallel learning of influential components with filtered sample region

- Qiangqiang Zhao, Jinyan Duan, Kang Jia and Jun Hong
- Fragility estimation for performance-based structural design of floating offshore wind turbine components

- Do-Eun Choe and Mahyar Ramezani
- Probabilistic seismic risk analysis of electrical substations considering equipment-to-equipment seismic failure correlations

- Huangbin Liang and Qiang Xie
- Traffic advisory for ship encounter situation based on linear dynamic system

- Zhongyi Sui and Shuaian Wang
- Robustness analysis of smart manufacturing systems against resource failures: A two-layered network perspective

- Zhiting Song, Jianhua Zhu and Kun Chen
| | |
|