Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 138, issue C, 2015

Integrated risk management of safety and development on transportation corridors pp. 1-12

Shital A. Thekdi and James H. Lambert

Assessing the reliability of components with micro- and nano-structures when they are part a multi-scale system pp. 13-20

Nader Ebrahimi and Mahmoud Shehadeh

A systematic framework to investigate the coverage of abnormal operating procedures in nuclear power plants pp. 21-30

Jinkyun Park and Wondea Jung

Imprecise inference for warranty contract analysis pp. 31-39

Lev V. Utkin, Frank P.A. Coolen and Sergey V. Gurov

An effective approach to reducing strategy space for maintenance optimisation of multistate series–parallel systems pp. 40-53

Yifan Zhou, Tian Ran Lin, Yong Sun, Yangqing Bian and Lin Ma

On the optimal degree of imperfect repair pp. 54-58

Maxim Finkelstein

Quantification of margins and mixed uncertainties using evidence theory and stochastic expansions pp. 59-72

Harsheel Shah, Serhat Hosder and Tyler Winter

A fault diagnosis system for interdependent critical infrastructures based on HMMs pp. 73-81

Stavros Ntalampiras, Yannis Soupionis and Georgios Giannopoulos

Dynamic k-out-of-n system reliability with component partnership pp. 82-92

David W. Coit, Nida Chatwattanasiri, Naruemon Wattanapongsakorn and Abdullah Konak

Protection of warehouses and plants under capacity constraint pp. 93-104

Naji Bricha and Mustapha Nourelfath

MISTRAL: A game-theoretical model to allocate security measures in a multi-modal chemical transportation network with adaptive adversaries pp. 105-114

Luca Talarico, Genserik Reniers, Sörensen, Kenneth and Johan Springael

Maritime transportation risk analysis: Review and analysis in light of some foundational issues pp. 115-134

Floris Goerlandt and Jakub Montewka

Importance analysis based on logical differential calculus and Binary Decision Diagram pp. 135-144

Elena Zaitseva, Vitaly Levashenko and Jozef Kostolny

Enhancing product robustness in reliability-based design optimization pp. 145-153

Xiaotian Zhuang, Rong Pan and Xiaoping Du

A recursive framework for time-dependent characteristics of tested and maintained standby units with arbitrary distributions for failures and repairs pp. 154-162

Jussi K. Vaurio

Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses pp. 163-175

Manuel Barranco, Proenza, Julián and Almeida, Luís

Comparing the treatment of uncertainty in Bayesian networks and fuzzy expert systems used for a human reliability analysis application pp. 176-193

Piero Baraldi, Luca Podofillini, Lusine Mkrtchyan, Enrico Zio and Vinh N. Dang

Integration of model verification, validation, and calibration for uncertainty quantification in engineering systems pp. 194-209

Shankar Sankararaman and Sankaran Mahadevan

Scientific computer simulation review pp. 210-218

Joshua S. Kaizer, A. Kevin Heller and William L. Oberkampf

Hybrid PSO–SVM-based method for forecasting of the remaining useful life for aircraft engines and evaluation of its reliability pp. 219-231

García Nieto, P.J., García-Gonzalo, E., Sánchez Lasheras, F. and F.J. de Cos Juez

Advanced surrogate model and sensitivity analysis methods for sodium fast reactor accident assessment pp. 232-241

A. Marrel, N. Marie and M. De Lozzo

A dynamic discretization method for reliability inference in Dynamic Bayesian Networks pp. 242-252

Jiandao Zhu and Matthew Collette

Application of Bayesian nonparametric models to the uncertainty and sensitivity analysis of source term in a BWR severe accident pp. 253-262

Xiaoyu Zheng, Hiroto Itoh, Kenji Kawaguchi, Hitoshi Tamaki and Yu Maruyama

Application of dynamic Bayesian network to risk analysis of domino effects in chemical infrastructures pp. 263-272

Nima Khakzad

Failure mechanism dependence and reliability evaluation of non-repairable system pp. 273-283

Ying Chen, Liu Yang, Cui Ye and Rui Kang

Volume 137, issue C, 2015

Perspectives on risk and the unforeseen pp. 1-5

Stein Haugen and Jan Erik Vinnem

Quantitative assessment of disaster resilience: An empirical study on the importance of post-disaster recovery costs pp. 6-17

Soonyoung Yu, Sung-Wook Kim, Chang-Whan Oh, Hyunuk An and Jin-Man Kim

Hazard identification for innovative LNG regasification technologies pp. 18-28

Nicola Paltrinieri, Alessandro Tugnoli and Valerio Cozzani

Reliability-based decision making for selection of ready-mix concrete supply using stochastic superiority and inferiority ranking method pp. 29-39

Jui-Sheng Chou and Citra Satria Ongkowijoyo

First and second order approximate reliability analysis methods using evidence theory pp. 40-49

ZhongXiang Zhang, C. Jiang, G.G. Wang and X. Han

Two neural network based strategies for the detection of a total instantaneous blockage of a sodium-cooled fast reactor pp. 50-57

Sinuhe Martinez-Martinez, Nadhir Messai, Jean-Philippe Jeannot and Danielle Nuzillard

Vulnerability assessment and mitigation for the Chinese railway system under floods pp. 58-68

Liu Hong, Min Ouyang, Srinivas Peeta, Xiaozheng He and Yongze Yan

An integrated production, inventory and preventive maintenance model for a multi-product production system pp. 76-86

Xuejuan Liu, Wenbin Wang and Rui Peng

Regional and parametric sensitivity analysis of Sobol׳ indices pp. 87-100

Pengfei Wei, Zhenzhou Lu and Jingwen Song

Software in military aviation and drone mishaps: Analysis and recommendations for the investigation process pp. 101-111

Veronica L. Foreman, Favaró, Francesca M., Joseph H. Saleh and Christopher W. Johnson

Achieving reasonable conservatism in nuclear safety analyses pp. 112-119

Kamiar Jamali

Computing confidence and prediction intervals of industrial equipment degradation by bootstrapped support vector regression pp. 120-128

Isis Didier Lins, Droguett, Enrique López, Moura, Márcio das Chagas, Enrico Zio and Carlos Magno Jacinto

EM algorithm for one-shot device testing with competing risks under exponential distribution pp. 129-140

N. Balakrishnan, H.Y. So and M.H. Ling

Volume 136, issue C, 2015

A new cut-based algorithm for the multi-state flow network reliability problem pp. 1-7

Wei-Chang Yeh, Changseok Bae and Chia-Ling Huang

Uncertainty and sensitivity analysis of radionuclide migration through the engineered barriers of deep geological repository: Case of RBMK-1500 SNF pp. 8-16

Asta Narkuniene, Povilas Poskas, Raimondas Kilda and Gytis Bartkus

A systems approach to risk management through leading safety indicators pp. 17-34

Nancy Leveson

Target-oriented utility theory for modeling the deterrent effects of counterterrorism pp. 35-46

Vicki M. Bier and Fuat Kosanoglu

Risk assessment and risk-cost optimization of distributed power generation systems considering extreme weather conditions pp. 47-61

R. Rocchetta, Y.F. Li and E. Zio

A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system pp. 62-74

A. Azadeh, B. Maleki Shoja, S. Ghanei and M. Sheikhalishahi

Accelerated reliability demonstration under competing failure modes pp. 75-84

Wei Luo, Chun-hua Zhang, Xun Chen and Yuan-yuan Tan

Hidden Markov Models approach used for life parameters estimations pp. 85-91

A. Fort, M. Mugnaini and V. Vignoli

Robust D-optimal designs under correlated error, applicable invariantly for some lifetime distributions pp. 92-100

Rabindra Nath Das, Jinseog Kim and Jeong-Soo Park

Multiobjective planning of distribution networks incorporating switches and protective devices using a memetic optimization pp. 101-108

A. Vieira Pombo, Murta-Pina, João and Pires, V. Fernão

Extended object-oriented Petri net model for mission reliability simulation of repairable PMS with common cause failures pp. 109-119

Xin-yang Wu and Xiao-Yue Wu

Supervision and prognosis architecture based on dynamical classification method for the predictive maintenance of dynamical evolving systems pp. 120-131

M. Traore, A. Chammas and E. Duviella

A multiwavelet support vector regression method for efficient reliability assessment pp. 132-139

Hongzhe Dai, Boyi Zhang and Wei Wang

Capacity loss and residual capacity in weighted k-out-of-n:G systems pp. 140-144

Serkan Eryilmaz

Non-periodic preventive maintenance with reliability thresholds for complex repairable systems pp. 145-156

Zu-Liang Lin, Yeu-Shiang Huang and Chih-Chiang Fang