Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu (repec@elsevier.com).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 106, issue C, 2012

Network theory-based analysis of risk interactions in large engineering projects pp. 1-10

Chao Fang, Franck Marle, Enrico Zio and Jean-Claude Bocquet

Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspection pp. 11-27

Wenbin Dong, Torgeir Moan and Zhen Gao

A multi-state model for the reliability assessment of a distributed generation system via universal generating function pp. 28-36

Yan-Fu Li and Enrico Zio

The discrete additive Weibull distribution: A bathtub-shaped hazard for discontinuous failure data pp. 37-44

Mark Bebbington, Chin-Diew Lai, Morgan Wellington and RiÄ ardas Zitikis

Multi-objective optimization of design and testing of safety instrumented systems with MooN voting architectures using a genetic algorithm pp. 45-60

Torres-Echeverría, A.C., S. Martorell and H.A. Thompson

Approximate dynamic fault tree calculations for modelling water supply risks pp. 61-71

Andreas Lindhe, Tommy Norberg and Rosén, Lars

Two-terminal reliability of a mobile ad hoc network under the asymptotic spatial distribution of the random waypoint model pp. 72-79

Binchao Chen, Aaron Phillips and Timothy I. Matis

Dynamic MLD analysis with flow graphs pp. 80-85

K. Jenab, A. Sarfaraz, B.S. Dhillon and S.M. Seyed Hosseini

A support vector density-based importance sampling for reliability assessment pp. 86-93

Hongzhe Dai, Hao Zhang and Wei Wang

A parameter estimation method for a condition-monitored device under multi-state deterioration pp. 94-103

Ramin Moghaddass and Ming J. Zuo

Analysis of trends in aviation maintenance risk: An empirical approach pp. 104-118

Karen B. Marais and Matthew R. Robichaud

A fast approximation method for reliability analysis of cold-standby systems pp. 119-126

Chaonan Wang, Liudong Xing and Suprasad V. Amari

Evaluate the system reliability for a manufacturing network with reworking actions pp. 127-137

Yi-Kuei Lin and Ping-Chen Chang

Integrated load distribution and production planning in series-parallel multi-state systems with failure rate depending on load pp. 138-145

Mustapha Nourelfath and Farouk Yalaoui

Conventional and dynamic safety analysis: Comparison on a chemical batch reactor pp. 146-159

L. Podofillini and V.N. Dang

Forecasting warranty claims for recently launched products pp. 160-164

Shaomin Wu and Artur Akbarov

An overview of the recent advances in delay-time-based maintenance modelling pp. 165-178

Wenbin Wang

Data-driven uncertainty quantification using the arbitrary polynomial chaos expansion pp. 179-190

S. Oladyshkin and W. Nowak

On the link between risk and exposure pp. 191-199

Terje Aven

Release of hazardous substances in flood events: Damage model for atmospheric storage tanks pp. 200-216

Gabriele Landucci, Giacomo Antonioni, Alessandro Tugnoli and Valerio Cozzani

Bayesian inference with overlapping data for systems with continuous life metrics pp. 217-231

Chris Jackson and Ali Mosleh

Volume 105, issue C, 2012

The financial crisis in an operational risk management context—A review of causes and influencing factors pp. 3-12

L.B. Andersen, Häger, D., S. Maberg, Næss, M.B. and M. Tungland

An integrated approach to the analysis of causes of crime/public disorder—A case study for the “Tlahuac†incident pp. 13-24

Milos Ferjencik

Mitigation of fire damage and escalation by fireproofing: A risk-based strategy pp. 25-35

Alessandro Tugnoli, Valerio Cozzani, Annamaria Di Padova, Tiziana Barbaresi and Fabrizio Tallone

Occupational risk of building construction pp. 36-46

O.N. Aneziris, E. Topali and I.A. Papazoglou

Why risk acceptance criteria need to be defined by the authorities and not the industry? pp. 47-50

Eirik Bjorheim Abrahamsen and Terje Aven

Dynamic functional modelling of vulnerability and interoperability of Critical Infrastructures pp. 51-63

P. Trucco, E. Cagno and M. De Ambroggi

Correlation models in flood risk analysis pp. 64-72

F.L.M. Diermanse and C.P.M. Geerse

A time-discrete extended gamma process for time-dependent degradation phenomena pp. 73-79

M. Guida, F. Postiglione and G. Pulcini

Risk analysis of critical infrastructures emphasizing electricity supply and interdependencies pp. 80-89

Kjølle, G.H., I.B. Utne and O. Gjerde

A study on the effect of flaw detection probability assumptions on risk reduction achieved by non-destructive inspection pp. 90-96

O. Cronvall, K. Simola, Männistö, I., J. Gunnars, L. Alverlind, Dillström, P. and L. Gandossi

Comparative assessment of severe accident risks in the coal, oil and natural gas chains pp. 97-103

Peter Burgherr, Petrissa Eckle and Stefan Hirschberg

Model checking of safety-critical software in the nuclear engineering domain pp. 104-113

J. Lahtinen, J. Valkonen, Björkman, K., J. Frits, Niemelä, I. and K. Heljanko

Volume 104, issue C, 2012

Towards fault-tolerant decision support systems for ship operator guidance pp. 1-14

Ulrik D. Nielsen, Zoran Lajic and Jensen, Jørgen J.

Sensitivity study of dynamic systems using polynomial chaos pp. 15-26

Eduardo Haro Sandoval, Floriane Anstett-Collin and Michel Basset

Risk-averse decision-making for civil infrastructure exposed to low-probability, high-consequence events pp. 27-35

Eun Jeong Cha and Bruce R. Ellingwood

Dynamic risk analysis using bow-tie approach pp. 36-44

Nima Khakzad, Faisal Khan and Paul Amyotte

Dependencies in event trees analyzed by Petri nets pp. 45-57

Nývlt, Ondřej and Marvin Rausand

Optimal integrated process control and maintenance under general deterioration pp. 58-70

S. Panagiotidou and G. Tagaras

Maintenance management of railway infrastructures based on reliability analysis pp. 71-83

Marco Macchi, Marco Garetti, Domenico Centrone, Luca Fumagalli and Gian Piero Pavirani

Introducing buffer inventories in the RBD analysis of process production systems pp. 84-95

Marco Macchi, Fredy Kristjanpoller, Marco Garetti, Adolfo Arata and Luca Fumagalli

An automated method for estimating reliability of grid systems using Bayesian networks pp. 96-105

Ozge Doguc and Jose Emmanuel Ramirez-Marquez

Volume 103, issue C, 2012

Optimal maintenance policy for a system subject to damage in a discrete time process pp. 1-10

Yu-Hung Chien, Shey-Huei Sheu and Zhe George Zhang

A Bayesian hidden Markov model for imperfect debugging pp. 11-21

Antonio Pievatolo, Fabrizio Ruggeri and Refik Soyer

Prioritizing risks via several expert perspectives with application to runway safety pp. 22-34

Ellen C. Rogerson and James H. Lambert

Solving binary-state multi-objective reliability redundancy allocation series-parallel problem using efficient epsilon-constraint, multi-start partial bound enumeration algorithm, and DEA pp. 35-44

Kaveh Khalili-Damghani and Maghsoud Amiri

Reliability of k-out-of-n systems with phased-mission requirements and imperfect fault coverage pp. 45-50

Liudong Xing, Suprasad V. Amari and Chaonan Wang

Joint redundancy and imperfect preventive maintenance optimization for series–parallel multi-state degraded systems pp. 51-60

Mustapha Nourelfath, Châtelet, Eric and Nabil Nahas

Multi-objective optimization of a series–parallel system using GPSIA pp. 61-71

Ekene Gabriel Okafor and You-Chao Sun

Optimizing protections against cascades in network systems: A modified binary differential evolution algorithm pp. 72-83

E. Zio, L.R. Golea and G. Sansavini

A new method for explicit modelling of single failure event within different common cause failure groups pp. 84-93

KanÄ ev, DuÅ¡ko and Marko ÄŒepin

A physics-of-failure based reliability and maintenance modeling framework for stent deployment and operation pp. 94-101

Elias Keedy and Qianmei Feng

Application of the load flow and random flow models for the analysis of power transmission networks pp. 102-109

Enrico Zio, Roberta Piccinelli, Maurizio Delfanti, Valeria Olivieri and Mauro Pozzi

Road maintenance optimization through a discrete-time semi-Markov decision process pp. 110-119

Xueqing Zhang and Hui Gao

Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life pp. 120-135

Chao Hu, Byeng D. Youn, Pingfeng Wang and Joung Taek Yoon