Reliability Engineering and System Safety

2005 - 2025

Current editor(s): Carlos Guedes Soares

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 132, issue C, 2014

A virtual experimental technique for data collection for a Bayesian network approach to human reliability analysis pp. 1-8

Mashrura Musharraf, David Bradbury-Squires, Faisal Khan, Brian Veitch, Scott MacKinnon and Syed Imtiaz

Mapping model validation metrics to subject matter expert scores for model adequacy assessment pp. 9-19

Kirubel Teferra, Michael D. Shields, Adam Hapij and Raymond P. Daddazio

Spacecraft early design validation using formal methods pp. 20-35

Marco Bozzano, Alessandro Cimatti, Joost-Pieter Katoen, Panagiotis Katsaros, Konstantinos Mokos, Viet Yen Nguyen, Thomas Noll, Bart Postma and Marco Roveri

A novel method for SIL verification based on system degradation using reliability block diagram pp. 36-45

Long Ding, Hong Wang, Kai Kang and Kai Wang

Dynamic analysis and reliability assessment of structures with uncertain-but-bounded parameters under stochastic process excitations pp. 46-59

Duy Minh Do, Wei Gao, Chongmin Song and Sawekchai Tangaramvong

Controller recovery from equipment failures in air traffic control: A framework for the quantitative assessment of the recovery context pp. 60-71

Branka Subotic, Wolfgang Schuster, Arnab Majumdar and Washington Ochieng

A copula-based sampling method for data-driven prognostics pp. 72-82

Zhimin Xi, Rong Jing, Pingfeng Wang and Chao Hu

A value-based preventive maintenance policy for multi-component system with continuously degrading components pp. 83-89

Bin Liu, Zhengguo Xu, Min Xie and Way Kuo

Reliability analysis of repairable multi-state system with common bus performance sharing pp. 90-96

Huan Yu, Jun Yang and Huadong Mo

Analyzing the reliability of shuffle-exchange networks using reliability block diagrams pp. 97-106

Fathollah Bistouni and Mohsen Jahanshahi

Efficient approach for reliability-based optimization based on weighted importance sampling approach pp. 107-114

Xiukai Yuan and Zhenzhou Lu

Reliability for systems of degrading components with distinct component shock sets pp. 115-124

Sanling Song, David W. Coit and Qianmei Feng

Release of hazardous substances in flood events: Damage model for horizontal cylindrical vessels pp. 125-145

Gabriele Landucci, Amos Necci, Giacomo Antonioni, Alessandro Tugnoli and Valerio Cozzani

Nonparametric predictive pairwise comparison with competing risks pp. 146-153

Tahani Coolen-Maturi

Measuring the effectiveness of a near-miss management system: An application in an automotive firm supplier pp. 154-162

S. Andriulo and M.G. Gnoni

A new method for evaluating Borgonovo moment-independent importance measure with its application in an aircraft structure pp. 163-175

Leigang Zhang, Zhenzhou Lu, Lei Cheng and Chongqing Fan

Uncertainty propagation and sensitivity analysis in system reliability assessment via unscented transformation pp. 176-185

Claudio M. Rocco Sanseverino and Ramirez-Marquez, José Emmanuel

A case study of remaining storage life prediction using stochastic filtering with the influence of condition monitoring pp. 186-195

Zhaoqiang Wang, Changhua Hu, Wenbin Wang, Zhijie Zhou and Xiaosheng Si

Optimal reliability design for over-actuated systems based on the MIT rule: Application to an octocopter helicopter testbed pp. 196-206

Abbas Chamseddine, Didier Theilliol, Iman Sadeghzadeh, Youmin Zhang and Philippe Weber

Scenario-based resilience assessment framework for critical infrastructure systems: Case study for seismic resilience of seaports pp. 207-219

Abdollah Shafieezadeh and Lindsay Ivey Burden

Automated synthesis of dependable mediators for heterogeneous interoperable systems pp. 220-232

F. Di Giandomenico, M.L. Itria, P. Masci and N. Nostro

Maintenance grouping strategy for multi-component systems with dynamic contexts pp. 233-249

Hai Canh Vu, Phuc Do, Anne Barros and Bérenguer, Christophe

Relevance of control theory to design and maintenance problems in time-variant reliability: The case of stochastic viability pp. 250-260

Rougé, Charles, Jean-Denis Mathias and Guillaume Deffuant

Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance pp. 261-273

Paraic C. Ryan, Mark G. Stewart, Nathan Spencer and Yue Li

Volume 131, issue C, 2014

IPICA_Lite—Improvements to root cause analysis pp. 1-13

Milos Ferjencik

The construction of social identity in newly recruited nuclear engineering staff: A longitudinal study pp. 14-28

Lynda Nguyen, Glen Murphy and Artemis Chang

Bayesian-network-based safety risk analysis in construction projects pp. 29-39

Limao Zhang, Xianguo Wu, Miroslaw J. Skibniewski, Jingbing Zhong and Yujie Lu

Variable-fidelity model selection for stochastic simulation pp. 40-52

Joshua Mullins and Sankaran Mahadevan

Safety distance between underground natural gas and water pipeline facilities pp. 53-60

R. Mohsin, Z.A. Majid and M.Z. Yusof

An algorithmic approach for the dynamic reliability analysis of non-repairable multi-state weighted k-out-of-n:G system pp. 61-65

Serkan Eryilmaz and Rıza Bozbulut, Ali

Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study pp. 66-82

Qingqing Zhai, Jun Yang and Yu Zhao

Choosing a heuristic and root node for edge ordering in BDD-based network reliability analysis pp. 83-93

Yuchang Mo, Liudong Xing, Farong Zhong, Zhusheng Pan and Zhongyu Chen

Resilience of chemical industrial areas through attenuation-based security pp. 94-101

G.L.L. Reniers, Sörensen, K., F. Khan and P. Amyotte

A decision-making framework to integrate maintenance contract conditions with critical spares management pp. 102-108

David R. Godoy, Rodrigo Pascual and Peter Knights

An improved adaptive kriging-based importance technique for sampling multiple failure regions of low probability pp. 109-117

F. Cadini, F. Santos and E. Zio

Adversarial life testing: A Bayesian negotiation model pp. 118-125

M.J. Rufo, Martín, J. and Pérez, C.J.

Statistical characteristics of serious network failures in Japan pp. 126-134

Masato Uchida

Development and application of a living probabilistic safety assessment tool: Multi-objective multi-dimensional optimization of surveillance requirements in NPPs considering their ageing pp. 135-147

KanÄ ev, DuÅ¡ko, Marko ÄŒepin and Gjorgiev, Blaže

Establishment of the optimal time interval between periodic inspections for redundant systems pp. 148-165

Alebrant Mendes, Angélica, David W. Coit and Duarte Ribeiro, José Luis

The validation of evacuation simulation models through the analysis of behavioural uncertainty pp. 166-174

Ruggiero Lovreglio, Enrico Ronchi and Dino Borri

Explicit and implicit methods for probabilistic common-cause failure analysis pp. 175-184

Chaonan Wang, Liudong Xing and Gregory Levitin

Extra-capacity versus protection for supply networks under attack pp. 185-196

Naji Bricha and Mustapha Nourelfath

A systems perspective on the unstable approach in commercial aviation pp. 197-202

David Moriarty and Steve Jarvis

Joint optimal inspection and inventory for a k-out-of-n system pp. 203-215

Erik T.S. Bjarnason, Sharareh Taghipour and Dragan Banjevic

Estimation of the inverse Weibull distribution based on progressively censored data: Comparative study pp. 216-227

Rola M. Musleh and Amal Helu

Detecting cracks in aircraft engine fan blades using vibrothermography nondestructive evaluation pp. 229-235

Chunwang Gao, William Q. Meeker and Donna Mayton

Reliability assessment based on degradation measurements: How to compare some models? pp. 236-241

Julien Baussaron, Barreau Mihaela, Léo, Gerville-Réache, Fabrice, Guérin and Schimmerling Paul

Optimal number of tests to achieve and validate product reliability pp. 242-250

Hussam Ahmed and Alaa Chateauneuf

Optimal design of accelerated life tests for an extension of the exponential distribution pp. 251-256

Firoozeh Haghighi

Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions pp. 257-270

David Bigaud and Osama Ali

Repairable system analysis in presence of covariates and random effects pp. 271-281

M. Giorgio, M. Guida and G. Pulcini

Reliability of maintained systems under a semi-Markov setting pp. 282-290

Sonia Malefaki, Nikolaos Limnios and Pierre Dersin

On selection of optimal stochastic model for accelerated life testing pp. 291-297

P. Volf and Timková, J.

Nonparametric predictive inference for reliability of a k-out-of-m:G system with multiple component types pp. 298-304

Ahmad M. Aboalkhair, Frank P.A. Coolen and Iain M. MacPhee