International Journal of Production Economics

1991 - 2026

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 93-94, issue 1, 2005

Preface pp. xiii-xiii

Attila Chikan

Evaluation of two simple extreme transshipment strategies pp. 1-11

Stefan Minner and Edward A. Silver

Trend breaks in US inventory to sales ratios pp. 13-23

F. Owen Irvine

Comparing CONWIP, synchronized CONWIP, and Kanban in complex supply chains pp. 25-40

Katsuhiko Takahashi, Myreshka and Daisuke Hirotani

The role of ERP tools in supply chain information sharing, cooperation, and cost optimization pp. 41-52

Peter Kelle and Asli Akbulut

A simple decision rule for decentralized two-echelon inventory control pp. 53-59

Sven Axsater

Macroeconomic characteristics and inventory investment: a multi-country study pp. 61-73

Attila Chikan, Erzsébet Kovács and Tunde Tatrai

Inventory investment and output volatility pp. 75-86

F. Owen Irvine and Scott Schuh

Measuring the convexity of the cost function pp. 87-99

Moheb Ghali

An alternative estimate of real inventory change for national economic accounts pp. 101-110

Christian Ehemann

Optimal inventory policies when sales are discretionary pp. 111-119

Herbert Scarf

Logistics customer service levels in Poland:: Changes between 1993 and 2001 pp. 121-128

Danuta Kisperska-Moron

Inventory management: Is there a knock-on effect? pp. 129-138

Gyula Vastag and D. Clay Whybark

The role of C-products in providing customer service--refining the inventory policy according to customer-specific factors pp. 139-149

Janne Huiskonen, Petri Niemi and Timo Pirttila

The relationship between UK manufacturers' inventory levels and supply, internal and market factors pp. 151-160

Adegoke Oke and Marek Szwejczewski

Motives behind purchasing consortia pp. 161-168

Eija Tella and Veli-Matti Virolainen

Cost-parametric analysis of lateral transshipment policies in two-echelon supply chains pp. 169-178

Jonathan Burton and Avijit Banerjee

Controlling inventories in a supply chain: A case study pp. 179-188

Eric Porras Musalem and Rommert Dekker

Concurrent pricing and lot sizing for make-to-order contract production pp. 189-195

Avijit Banerjee

Model and analysis of integrated production-inventory system: The case of steel production pp. 197-205

Simone Zanoni and Lucio Zavanella

Logistics in Bulgarian manufacturing companies pp. 207-215

Pavel Dimitrov

Worst-case analysis of the full load policy in the single link problem pp. 217-224

Luca Bertazzi and Maria Grazia Speranza

Production planning: An improved hybrid approach pp. 225-229

M.D. Byrne and Md Saddam Hossain

Order allocation in a multiple-supplier environment pp. 231-238

Ruengsak Kawtummachai and Nguyen Van Hop

Advanced available-to-promise: Classification, selected methods and requirements for operations and inventory management pp. 239-252

Richard Pibernik

Inventory management in supply chains: A bargaining problem pp. 253-262

Eric Sucky

Management control and the production environment: A review pp. 263-272

Paula van Veen-Dirks

The complex relationship between inventory control and organisational setting: Theory and practice pp. 273-284

Jan de Vries

Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns pp. 285-300

Ou Tang and Robert W. Grubbstrom

The effects of emission trading on production and inventories in the Arrow-Karlin model pp. 301-308

Imre Dobos

Stocking decisions for repairable spare parts pooling in a multi-hub system pp. 309-317

Hartanto Wong, Dirk Cattrysse and Dirk Van Oudheusden

Timing production in LP models in a rolling schedule pp. 319-329

J.M. Spitter, A.G. de Kok and N.P. Dellaert

Eliminating drift in inventory and order based production control systems pp. 331-344

S.M. Disney and D.R. Towill

Stability of perishable goods in cold logistic chains pp. 345-356

Marija Bogataj, Ludvik Bogataj and Robert Vodopivec

Turnpike policies for periodic review inventory model with emergency orders pp. 357-373

Stanislaw Bylka

Lot sizes in a capacity constrained facility--a simulation study of stationary stochastic demand pp. 375-386

Par Brander, Erik Leven and Anders Segerstedt

Integrated inventory models with controllable lead time and backorder discount considerations pp. 387-397

Jason Chao-Hsien Pan and Yu-Cheng Hsiao

Replenish-up-to inventory control policy with random replenishment intervals pp. 399-405

Kadir Ertogral and M.A. Rahim

Integer-ratio policies for distribution/inventory systems pp. 407-415

B. Abdul-Jalbar, J. Gutierrez and J. Sicilia

The hotel yield management with two types of room prices, overbooking and cancellations pp. 417-428

Takeshi Koide and Hiroaki Ishii

Base-stock policies for the lost sales inventory system with Poisson demand and Erlangian lead times pp. 429-437

Soren Glud Johansen

A discounted cash flow approach to the base stock inventory model pp. 439-445

R.M. Hill and T.P.M. Pakkala

A continuous production-inventory problem with regeneration cycles pp. 447-454

Ryszarda Rempala

Sensitivity results considering rescheduling by AND/OR graphs pp. 455-464

Dusan Hvalica and Ludvik Bogataj

The distribution-free newsboy problem: Extensions to the shortage penalty case pp. 465-477

Hesham K. Alfares and Hassan H. Elmorra

The impact of aggregation level on forecasting performance pp. 479-491

Giulio Zotteri, Matteo Kalchschmidt and Federico Caniato

Fuzzy approach to the spatial games in the total market area pp. 493-503

Marija Bogataj and Janez Usenik

Simulation-based optimisation of multi-echelon inventory systems pp. 505-513

P. Kochel and U. Nielander

Volume 56-57, issue 1, 1998

Preface pp. xiii-xiv

Robert W. Grubbstrom and Hans H. Hinterhuber

Telemanufacturing: A flexible manufacturing solution pp. 1-12

Layek L. Abdel-Malek, Carl Wolf and Patrice D. Guyot

Optimal production run for processes with constant and random drifts pp. 13-19

Khaled S. Al-Sultan and A. Raouf

Costing partial order cycles in the temporary sale price problem pp. 21-27

F. J. Arcelus and G. Srinivasan

Ranking of enterprises based on multicriterial analysis pp. 29-35

Zoran Babic and Neli Plazibat

A knowledge-based expert system approach for the auditing process of some elements in the quality assurance system pp. 37-46

Demet Bayraktar

Performance analysis of a flexible manufacturing system: A statistical approach pp. 47-59

Andrea D'Angelo, Massimo Gastaldi and Nathan Levialdi

The break quantity rule's effect on inventory costs in a 1-warehouse, N-retailers distribution system pp. 61-68

Rommert Dekker, M. J. Kleijn and A. G. de Kok

A spare parts stocking policy based on equipment criticality pp. 69-77

Rommert Dekker, M. J. Kleijn and P. J. de Rooij

Make-to-order policies for a stochastic lot-sizing problem using overtime pp. 79-97

N. P. Dellaert and M. T. Melo

Sustainable production: The ultimate result of a continuous improvement pp. 99-110

Ad J. de Ron

Using simulation to evaluate the introduction of a Kanban subsystem within an MRP-controlled manufacturing environment pp. 111-122

Rudi De Smet and Ludo Gelders

Production-inventory control under environmental constraints pp. 123-131

Imre Dobos

Productivity reconsidered: Critical assessment of investments pp. 133-144

Eero Eloranta and Jan Holmstrom

Simulation approach in comparison of a pull system in a cell production system with a push system in a conventional production system according to flexible cost: A case study pp. 145-155

Tijen Ertay

Application of a simulation methodology to the redesign of a logistical control system pp. 157-168

G. N. Evans, M. M. Naim and D. R. Towill

Development of the production using participative simulation games: Two case studies pp. 169-178

Minna Forssen-Nyberg and Jussi Hakamaki

Strategic planning for long-distance telecommunications: A symbiotic production system pp. 179-189

Massimo Gastaldi and Nathan Levialdi

Multiple lot-sizing, and value of probabilistic information, in production to order of an uncertain size pp. 191-197

Yigal Gerchak and Abraham Grosfeld-Nir

A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming pp. 199-212

S. H. Ghodsypour and C. O'Brien

A net present value approach to safety stocks in planned production pp. 213-229

Robert W. Grubbstrom

Implementation of activity-based costing in manufacturing pp. 231-242

A. Gunasekaran and M. Sarhadi

Production planning with multiple objectives in decentralized organizations pp. 243-252

Carsten Homburg

Sharpening logistics customer service strategy planning by applying Kano's quality element classification pp. 253-260

Janne Huiskonen and Timo Pirttila

Price dynamics on the recovered paper market pp. 261-273

Anne Huttunen and Timo Pirttila

An inventory model with Poisson demands and emergency orders pp. 275-289

Soren Glud Johansen and Anders Thorstenson

An overhaul-replacement model for equipment subject to technological change in an inflation-prone economy pp. 291-301

E. Ertugrul Karsak and Ethem Tolga

An analytic hierarchy process-based approach to the strategic management of logistic service: An empirical study in the mechanical forest industry pp. 303-318

Jukka Korpela, Markku Tuominen and Matti Valoaho

Making sense of technology: Towards a synthesis between neoclassical and evolutionary approaches pp. 319-332

Kalevi Kylaheiko

Embedding the management of evolution into strategic learning pp. 333-345

Terho Laakso, Stephane Kleinhans, Riitta Smeds and Guy Doumeingts

The performance of workload control concepts in job shops: Improving the release method pp. 347-364

Martin J. Land and Gerard J. C. Gaalman

Investigating sensitivity and the impact of information on pricing decisions in an M/M/1/ [infinity] queueing model pp. 365-377

Christian Larsen

Transport time policy and service level as components in logistics strategy: A case study pp. 379-387

Antti Lehmusvaara

What prevents companies from improving logistics operations: Some empirical findings pp. 389-396

Antti Lehmusvaara and Janne Huiskonen

Strategic networks: The emerging business organization and its impact on production costs pp. 397-405

Boris M. Levin

Total quality management of a production-maintenance system: A network approach pp. 407-421

Eugene Levner, Dror Zuckerman and Gavriel Meirovich

Strategic moves at the prospect of a deregulated electricity market pp. 423-432

Ted Lindblom and Berndt Andersson

Transferring world class production to developing countries: A strategic model pp. 433-450

Robert N. Mefford and Peter Bruun

A small business international market selection model pp. 451-462

J. Roberta Minifie and Vicki West

A progressive figure-based production planning system for a component manufacturer pp. 463-481

H. Missbauer, G. Zapfel and W. Hauber

Reorganizing for product development: Evidence from Japanese automobile firms pp. 483-493

Moreno Muffatto

Describing products as executable programs: Variant specification in a customer-oriented environment pp. 495-502

Kai A. Olsen and Per Saetre

Subcontract coordination in construction pp. 503-509

Richard Olsson

A minimax distribution free procedure for mixed inventory model with variable lead time pp. 511-516

Liang-Yuh Ouyang and Kun-Shan Wu

Testing manufacturing strategy formulation processes pp. 517-523

K. W. Platts, J. F. Mills, M. C. Bourne, A. D. Neely, A. H. Richards and M. J Gregory

Applicability of statistical process control techniques pp. 525-535

Werner A. J. Schippers

Case-based reasoning for production scheduling pp. 537-546

Gunter Schmidt

Hierarchical planning in organizations: Elements of a general theory pp. 547-556

Ch. Schneeweiss

A methodology for integrating economic criteria in design and production management decisions pp. 557-574

O. Senechal and C. Tahon

An analysis of the impact of plant and management variables in a multi-stage, mixed-model production system pp. 575-585

Andrea Sianesi

The development of a method for determining the efficiency and effectiveness of installed CAPM systems pp. 587-599

P. J. Sitoh, P. M. Braiden and J. E. L. Simmons

Managing capacity in tightly constrained systems pp. 601-610

Sri V. Sridharan

Exploring the diversity of teams pp. 611-619

Tiina Tanskanen, Paul Buhanist and Hanna Kostama

A cost function of Greek non-ferrous metal industry pp. 621-640

Kostas Tsekouras and N. G. Zagouras

Configuration and coordination of virtual production networks pp. 641-648

A. Tuma

Designing scheduling systems for packaging in process industries: A tobacco company case pp. 649-659

Peter Van Dam, Gerard J. C. Gaalman and Gerard Sierksma

Delivery performance improvement by controlled work-order release and work-center load balancing pp. 661-675

H. P. G. van Ooijen

A survey of procurement strategy development in industrial companies pp. 677-688

Veli-Matti Virolainen

Developing material delivery processes in cooperation: An application example of the construction industry pp. 689-698

Tutu Wegelius-Lehtonen and Samuli Pahkala

Customer-order-driven production: An economical concept for responding to demand uncertainty? pp. 699-709

Gunther Zapfel

Simulation of activity costs for the reengineering of production systems pp. 711-722

Gert Zulch and Bernd Brinkmeier