International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 170, issue PC, 2015

Assessing the environmental impact of integrated inventory and warehouse management pp. 717-729

Johannes Fichtinger, Jörg M. Ries, Eric H. Grosse and Peter Baker

Designing an effective closed loop system for pallet management pp. 730-740

Valerio Elia and Maria Grazia Gnoni

Developing design guidelines for a case-picking warehouse pp. 741-762

Lisa M. Thomas and Russell D. Meller

A knowledge-based logistics operations planning system for mitigating risk in warehouse order fulfillment pp. 763-779

H.Y. Lam, K.L. Choy, G.T.S. Ho, Stephen W.Y. Cheng and C.K.M. Lee

The two-warehouse material location selection problem pp. 780-789

Phichet Wutthisirisart, Mustafa Y. Sir and James S. Noble

Modeling class-based storage assignment over life cycle picking patterns pp. 790-800

Riccardo Manzini, Riccardo Accorsi, Mauro Gamberi and Stefano Penazzi

The worst-case performance of the Cube per Order Index slotting strategy is infinitely bad – A technical note pp. 801-804

Peter C. Schuur

Using a hybrid approach based on the particle swarm optimization and ant colony optimization to solve a joint order batching and picker routing problem pp. 805-814

Chen-Yang Cheng, Yin-Yann Chen, Tzu-Li Chen and John Jung-Woon Yoo

Robust material handling system design with standard deviation, variance and downside risk as risk measures pp. 815-824

Pratik Mital, Marc Goetschalckx and Edward Huang

Detailed design of fishbone warehouse layouts with vertical travel pp. 825-837

Luis F. Cardona, Diego F. Soto, Leonardo Rivera and Hector J. Martínez

Diagonal cross-aisles in unit load warehouses to increase handling performance pp. 838-849

Marco Bortolini, Maurizio Faccio, Mauro Gamberi and Riccardo Manzini

Finding optimal dwell points for automated guided vehicles in general guide-path layouts pp. 850-861

José A. Ventura, Subramanian Pazhani and Abraham Mendoza

Quantifying picker blocking in a bucket brigade order picking system pp. 862-873

Soondo Hong, Andrew Johnson and Brett A. Peters

A throughput model for a dual-tray Vertical Lift Module with a human order-picker pp. 874-881

Goran Dukic, Tihomir Opetuk and Tone Lerher

The effect of worker learning on manual order picking processes pp. 882-890

Eric H. Grosse and Christoph H. Glock

Effect of cognitive automation in a material handling system on manufacturing flexibility pp. 891-899

Pilsung Choe, Jeffrey D. Tew and Songzhen Tong

Volume 170, issue PB, 2015

On the true value of resource consumption when using energy in industrial and other processes pp. 377-384

Robert W. Grubbström

Green supply chain network optimization and the trade-off between environmental and economic objectives pp. 385-392

Alice Tognetti, Pan Theo Grosse-Ruyken and Stephan M. Wagner

Energy demand in production systems: A Queuing Theory perspective pp. 393-400

Lucio Zavanella, Simone Zanoni, Ivan Ferretti and Laura Mazzoldi

Production economics and the learning curve: A meta-analysis pp. 401-412

Eric H. Grosse, Christoph H. Glock and Sebastian Müller

Wealth and health at the Base of the Pyramid: Modelling trade-offs and complementarities for fast moving dairy product case pp. 413-421

Gerald Reiner, Stefan Gold and Rüdiger Hahn

An integrated marginal analysis approach for build-to-order products pp. 422-428

Yuji Sato, Kim Hua Tan and Ying Kei Tse

Impact of flexible contracts on the performance of both retailer and supplier pp. 429-444

Wenbo Cai, Layek Abdel-Malek, Babak Hoseini and Sharareh Rajaei Dehkordi

The relationship between disclosures of corporate social performance and financial performance: Evidences from GRI reports in manufacturing industry pp. 445-456

Lujie Chen, Andreas Feldmann and Ou Tang

Measuring service outcomes for adaptive preventive maintenance pp. 457-467

Mikael Öhman, Max Finne and Jan Holmström

Product portfolio management – Targets and key performance indicators for product portfolio renewal over life cycle pp. 468-477

Arto Tolonen, Marzieh Shahmarichatghieh, Janne Harkonen and Harri Haapasalo

Influence of lot size and planned lead time on service level and inventory for a single-stage production system with advance demand information and random required lead times pp. 478-488

Klaus Altendorfer

Workforce minimization for a mixed-model assembly line in the automotive industry pp. 489-500

Olga Battaïa, Xavier Delorme, Alexandre Dolgui, Johannes Hagemann, Anika Horlemann, Sergey Kovalev and Sergey Malyutin

Fill rate in a periodic review order-up-to policy under auto-correlated normally distributed, possibly negative, demand pp. 501-512

Stephen M. Disney, Gerard J.C. Gaalman, Carl Philip T. Hedenstierna and Takamichi Hosoda

Order release in the hybrid MTO–FTO production pp. 513-520

Nuno O. Fernandes, Cristóvão Silva and S. Carmo-Silva

Aggregate planning and forecasting in make-to-order production systems pp. 521-528

Margaretha Gansterer

Robust order promising with anticipated customer response pp. 529-542

Ralf Gössinger and Sonja Kalkowski

Managing inventory systems of slow-moving items pp. 543-550

G.J. Hahn and A. Leucht

Slab scheduling at parallel continuous casters pp. 551-562

Matthias Gerhard Wichmann and Thomas Stefan Spengler

Pricing strategy of environmental sustainable supply chain with internalizing externalities pp. 563-575

Huiping Ding, Qilan Zhao, Zhirong An, Jia Xu and Qian Liu

Adaptive supply chains in industrial districts: A complexity science approach focused on learning pp. 576-589

Ilaria Giannoccaro

Using a central Vehicle Holding Compound (VHC) in an open pipeline automotive order fulfilment system: A simulation study pp. 590-601

Bart L. MacCarthy and Tamer Ovutmen

Linking product modularity to supply chain integration in the construction and shipbuilding industries pp. 602-615

Margherita Pero, Martin Stößlein and Roberto Cigolini

The pre-positioning of warehouses at regional and local levels for a humanitarian relief organisation pp. 616-628

Saeyeon Roh, Stephen Pettit, Irina Harris and Anthony Beresford

Refund policies for cores with quality variation in OEM remanufacturing pp. 629-640

Shuoguo Wei, Ou Tang and Weihua Liu

Manufacturers׳ channel structures when selling asymmetric competing products pp. 641-651

Shilei Yang, Victor Shi and Jonathan E. Jackson

Optimal capacity provision for service providers with subsequent auctioning of projects pp. 652-662

Maximilian Budde and Stefan Minner

Development of a risk assessment selection methodology for asset maintenance decision making: An analytic network process (ANP) approach pp. 663-676

Peter Chemweno, Liliane Pintelon, Adriaan Van Horenbeek and Peter Muchiri

Applying lean principles to the design of healthcare facilities pp. 677-686

Chris Hicks, Tom McGovern, Gary Prior and Iain Smith

Strategic capacity planning in automotive production networks under duties and duty drawbacks pp. 687-700

Katharina Mariel and Stefan Minner

Competitive investments in cost reducing process improvement: The role of managerial incentives and spillover learning pp. 701-709

Jasper Veldman and Gerard J.C. Gaalman

Volume 170, issue PA, 2015

Is dishonesty the best policy? Supplier behaviour in a multi-tier supply chain pp. 1-13

Gregory D. DeYong and Hubert Pun

A design method for supply chain traceability systems with aligned interests pp. 14-24

Hongyan Dai, Ling Ge and Weihua Zhou

Use of MIP for planning temporary immigrant farm labor force pp. 25-33

C. Wishon, J.R. Villalobos, N. Mason, H. Flores and G. Lujan

Quantifying the risk of project delays with a genetic algorithm pp. 34-44

Jeremy Pfeifer, Kash Barker, Jose E. Ramirez-Marquez and Nazanin Morshedlou

The inventory billboard effect on the lead-time decision pp. 45-53

Zhengping Wu, Xin Zhai and Zhongyi Liu

Using the strategic relative alignment index for the selection of portfolio projects application to a public Venezuelan Power Corporation pp. 54-66

Mónica García-Melón, Rocío Poveda-Bautista and José L. Del Valle M.

A bi-objective interval-stochastic robust optimization model for designing closed loop supply chain network with multi-priority queuing system pp. 67-87

Behnam Vahdani and M. Mohammadi

An informative column generation and decomposition method for a production planning and facility location problem pp. 88-96

Zhe Liang, Yan He, Tao Wu and Canrong Zhang

Forecasting German car sales using Google data and multivariate models pp. 97-135

Dean Fantazzini and Zhamal Toktamysova

Optimal dynamic pricing and replenishment cycle for non-instantaneous deterioration items with inventory-level-dependent demand pp. 136-145

Jianxiong Zhang, Yu Wang, Lihao Lu and Wansheng Tang

Environmental operations management and its links with proactivity and performance: A study of the UK food industry pp. 146-159

Stephanie Graham and Antony Potter

The impacts of trust and contracts on opportunism in the 3PL industry: The moderating role of demand uncertainty pp. 160-170

Baofeng Huo, Yuxiao Ye and Xiande Zhao

Output and labor productivity in organized manufacturing: A panel cointegration analysis for India pp. 171-177

Mita Bhattacharya and Paresh Narayan

Reward–penalty mechanism for closed-loop supply chains under responsibility-sharing and different power structures pp. 178-190

Wenbin Wang, Yu Zhang, Kai Zhang, Tuo Bai and Jennifer Shang

Analysis of dual sourcing strategies under supply disruptions pp. 191-203

Stuart X. Zhu

Supply chain coordination under asymmetric production cost information and inventory inaccuracy pp. 204-218

Quansheng Lei, Jian Chen, Xingyu Wei and Shan Lu

Composite sustainable manufacturing practice and performance framework: Chinese auto-parts suppliers׳ perspective pp. 219-233

Zhen Wang, Nachiappan Subramanian, Angappa Gunasekaran, Muhammad D. Abdulrahman and Chang Liu

Vehicle routing problem with fuel consumption and carbon emission pp. 234-242

Jianghua Zhang, Yingxue Zhao, Weili Xue and Jin Li

Outsourcing strategy and production disruption of supply chain with demand and capacity allocation uncertainties pp. 243-257

Kebing Chen and Tiaojun Xiao

A hybrid algorithm for the multi-stage flow shop group scheduling with sequence-dependent setup and transportation times pp. 258-267

Cheng-Dar Liou and Yi-Chih Hsieh

How much does VMI better than RMI in a global environment? pp. 268-274

Haiyan Yu, Linglang Tang, Yinfeng Xu and Yong Wang

The economics of eco-labeling: Standards, costs and prices pp. 275-286

Arda Yenipazarli

Managing product variety with advance selling and capacity restrictions pp. 287-296

Thyagaraj S. Kuthambalayan, Peeyush Mehta and Kripa Shanker

Non-stationary demand forecasting by cross-sectional aggregation pp. 297-309

Bahman Rostami-Tabar, Mohamed Zied Babai, Yves Ducq and Aris Syntetos

Operational impact on the environment: Managing service systems with environmental deterioration pp. 310-320

Ye Shi, Yugang Yu and Lizhi Wang

A hybrid seasonal autoregressive integrated moving average and quantile regression for daily food sales forecasting pp. 321-335

Nari Sivanandam Arunraj and Diane Ahrens

A general multitiered supply chain network model of quality competition with suppliers pp. 336-356

Dong Li and Anna Nagurney

E-commerce trends and impacts across Europe pp. 357-369

Martin Falk and Eva Hagsten