International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 195, issue C, 2018

Improving competitiveness through performance evaluation using the APC model: A case in micro-irrigation pp. 1-11

Mohan Rao, Rishi Chhabria, Angappa Gunasekaran and Purnendu Mandal

Jostle heuristics for the 2D-irregular shapes bin packing problems with free rotation pp. 12-26

Ranga P. Abeysooriya, Julia A. Bennell and Antonio Martinez-Sykora

A two-stage chance-constrained stochastic programming model for a bio-fuel supply chain network pp. 27-44

Md Abdul Quddus, Sudipta Chowdhury, Mohammad Marufuzzaman, Fei Yu and Linkan Bian

Optimal bundling under imperfect competition pp. 45-53

Adriana Vamosiu

Verifying the relation between labor productivity and productive efficiency by means of the properties of the input-output matrices. The European case pp. 54-65

Miguel-Ángel Tarancón, María-Jesús Gutiérrez-Pedrero, Fernando E. Callejas and Isabel Martínez-Rodríguez

Delivery performance improvement in two-stage supply chain pp. 66-73

Maxim A. Bushuev

Integrated lot sizing and safety stock placement in a network of production facilities pp. 74-95

Kunal Kumar and Tarik Aouam

A tri-level optimization model for inventory control with uncertain demand and lead time pp. 96-105

Mohammad Rahdar, Lizhi Wang and Guiping Hu

Multi-tier sustainable global supplier selection using a fuzzy AHP-VIKOR based approach pp. 106-117

Anjali Awasthi, Kannan Govindan and Stefan Gold

Closed-loop supply chain network design with multiple transportation modes under stochastic demand and uncertain carbon tax pp. 118-131

Ali Haddadsisakht and Sarah M. Ryan

A decision on the truckload and less-than-truckload problem: An approach based on MCDA pp. 132-145

Diego Soto De La Vega, José Geraldo Vidal Vieira, Eli Angela Vitor Toso and Rosane Nunes de Faria

Exploring antecedents of supply chain collaboration: Effects of culture and interorganizational system appropriation pp. 146-157

Qingyu Zhang and Mei Cao

The impact of different contract structures on IT investment in logistics outsourcing pp. 158-167

Fengmei Gong, David S. Kung and Tong Zeng

Impact of cloud-based information sharing on hospital supply chain performance: A system dynamics framework pp. 168-185

Cigdem Gonul Kochan, David R. Nowicki, Brian Sauser and Wesley S. Randall

The impact of systematic changes in weather on the supply and demand of beverages pp. 186-197

Büşra Keleş, Patricia Gómez-Acevedo and Nazrul I. Shaikh

Refurbishing authorization strategy in the secondary market for electrical and electronic products pp. 198-209

Huihui Liu, Ming Lei, Tao Huang and G. Keong Leong

Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures pp. 210-226

Bassem Bouslah, Ali Gharbi and Robert Pellerin

A comparison of two stage-based hybrid algorithms for a batch scheduling problem in hybrid flow shop with learning effect pp. 227-248

Omid Shahvari and Rasaratnam Logendran

Timing of sales commitment in a supply chain with manufacturer-quality and retailer-effort induced demand pp. 249-258

Baoshan Liu, Shihua Ma, Xu Guan and Lei Xiao

Enhancing supply chain performance through supplier social sustainability: An emerging economy perspective pp. 259-272

Venkatesh Mani, Angappa Gunasekaran and Catarina Delgado

A decision model for a strategic closed-loop supply chain to reclaim End-of-Life Vehicles pp. 273-286

Ravi Shankar, Shisam Bhattacharyya and Alok Choudhary

GS2: An optimized attribute control chart to monitor process variability pp. 287-295

Erica Leandro Bezerra, Linda Lee Ho and Roberto da Costa Quinino

Coping with risk management and fill rate in the loss-averse newsvendor model pp. 296-310

Xinsheng Xu, Chi Kin Chan and Andre Langevin

Comparing Luenberger and Luenberger-Hicks-Moorsteen productivity indicators: How well is total factor productivity approximated? pp. 311-318

Kristiaan Kerstens, Zhiyang Shen and Ignace Van de Woestyne

Condition-based maintenance for systems with economic dependence and load sharing pp. 319-327

Minou C.A. Olde Keizer, Ruud H. Teunter, Jasper Veldman and M. Zied Babai

Make or buy? It is the question: A study in the presence of carbon tax pp. 328-337

Xiaoge Meng, Zhong Yao, Jiajia Nie and Yingxue Zhao

Choosing an online retail channel for a manufacturer: Direct sales or consignment? pp. 338-358

Cuixia Wang, Mingming Leng and Liping Liang

A framework for evaluating the performance of sustainable service supply chain management under uncertainty pp. 359-372

Ming-Lang Tseng, Ming K. Lim, Wai-Peng Wong, Yi-Chun Chen and Yuanzhu Zhan

An integrated revenue management framework for a firm’s greening, pricing and inventory decisions pp. 373-390

Syed Asif Raza, Sivakumar Rathinam, Mihaela Turiac and Laoucine Kerbache

Role of multiple stakeholders and the critical success factor theory for the sustainable supplier selection process pp. 391-418

Devika Kannan

Sustainable consumption and production in the food supply chain: A conceptual framework pp. 419-431

Kannan Govindan

Volume 194, issue C, 2017

Reprint of “Integrating make-to-order and make-to-stock in job shop control” pp. 3-12

Bart Beemsterboer, Martin Land, Ruud Teunter and Jos Bokhorst

Relation between lead time dependent demand and capacity flexibility in a two-stage supply chain with lost sales pp. 13-24

Klaus Altendorfer

Cover-Time Planning/Takt Planning: A technique for materials requirement and production planning pp. 25-31

Anders Segerstedt

Reprint of “Ergo-lot-sizing: An approach to integrate ergonomic and economic objectives in manual materials handling” pp. 32-42

Daria Battini, Christoph H. Glock, Eric H. Grosse, Alessandro Persona and Fabio Sgarbossa

On the trade-off between the leverage effect and real options thinking: A simulation-based model on metal mining investment pp. 43-51

Jyrki Savolainen, Mikael Collan, Kalevi Kyläheiko and Pasi Luukka

Investment performance analysis of industrial products: Case of an effluent processing facility at a chemical company pp. 52-58

Yuji Sato, Kim Hua Tan and Ying Kei Tse

Supply Chain Management: Horizontal carrier coordination through cooperative governance structures pp. 59-72

Per Agrell, Johan Lundin and Andreas Norrman

Supply chain collaboration for sustainability: A literature review and future research agenda pp. 73-87

Lujie Chen, Xiande Zhao, Ou Tang, Lydia Price, Shanshan Zhang and Wenwen Zhu

Dynamic strategies for supply disruptions in production-inventory systems pp. 88-101

Shanshan Li, Yong He and Lujie Chen

Scheduling of truck arrivals, truck departures and shop-floor operation in a cross-dock platform, based on trucks loading plans pp. 102-112

Christian Serrano, Xavier Delorme and Alexandre Dolgui

Reprint of “Mitigating risks of perishable products in the cyber-physical systems based on the extended MRP model” pp. 113-125

David Bogataj, Marija Bogataj and Domen Hudoklin

Reprint of “The impact of development cost on product line design and its environmental performance” pp. 126-134

Yibin Zhang, Maryam Hafezi, Xuan Zhao and Victor Shi

The extension and exploitation of the inventory and order based production control system archetype from 1982 to 2015 pp. 135-152

J. Lin, M.M. Naim, L. Purvis and J. Gosling

IOBPCS based models and decoupling thinking pp. 153-166

Joakim Wikner, Mohamed M. Naim, Virginia L.M. Spiegler and Junyi Lin

Capacity planning for cluster tools in the semiconductor industry pp. 167-180

Martin Romauch and Richard F. Hartl

Improving workload control order release: Incorporating a starvation avoidance trigger into continuous release pp. 181-189

Nuno O. Fernandes, Matthias Thürer, Cristóvão Silva and Sílvio Carmo-Silva

Possible market entry of a firm with an additive manufacturing technology pp. 190-199

Richard F. Hartl and Peter Kort

An investigation of renewable certificates policy in Swedish electricity industry using an integrated system dynamics model pp. 200-213

Ou Tang and Jakob Rehme

An Ising-based dynamic model to study the effect of social interactions on firm absorptive capacity pp. 214-227

Ilaria Giannoccaro and Giuseppe Carbone

Building an innovation-based supplier portfolio: The use of patent analysis in strategic supplier selection in the automotive sector pp. 228-236

Alexander Trautrims, Bart L. MacCarthy and Chetan Okade

Supply chain capability creation – The creation of the supply chain readiness for a new product during product development process pp. 237-245

Arto Tolonen, Harri Haapasalo, Janne Harkonen and Jordan Verrollot

Reprint of “Decision support models for supplier development: Systematic literature review and research agenda” pp. 246-260

Christoph H. Glock, Eric H. Grosse and Jörg M. Ries

Reprint of “The impact of mergers and acquisitions on shareholders' wealth in the logistics service industry” pp. 261-277

Florian Kiesel, Jörg M. Ries and Artur Tielmann