International Journal of Production Economics
1991 - 2025
Continuation of Engineering Costs and Production Economics. Current editor(s): Stefan Minner From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 157, issue C, 2014
- Supply diversification with isoelastic demand pp. 2-6

- Tao Li, Suresh Sethi and Jun Zhang
- Fleet sizing of laser guided vehicles and pallet shuttles in automated warehouses pp. 7-14

- Andrea Ferrara, Elisa Gebennini and Andrea Grassi
- The single period inventory model under dual sourcing and product carbon footprint constraint pp. 15-23

- Emel Arıkan and Werner Jammernegg
- Both Pareto and EOQ have limitations combining them delivers a powerful management tool for MRP and beyond pp. 24-30

- Geoff Relph and Michael Newton
- Behavioral analysis and adaptation of a negotiation based, quantitative planning approach for hybrid organizations pp. 31-38

- Michael Oberlaender and Alexander Dobhan
- Optimal dynamic pricing and ordering decisions for perishable products pp. 39-48

- Ek Peng Chew, Chulung Lee, Rujing Liu, Ki-sung Hong and Anming Zhang
- Deriving research agendas for manufacturing and logistics systems: A methodology pp. 49-61

- Maurice Bonney and Mohamad Y. Jaber
- Inventory configurations and drivers: An international study of assembling industries pp. 62-73

- Krisztina Demeter and Ruggero Golini
- A simple heuristic for vehicle routing – A variant of Clarke and Wright's saving method pp. 74-79

- Anders Segerstedt
- Multi-product multi-period Inventory Routing Problem with a transshipment option: A green approach pp. 80-88

- S.M.J. Mirzapour Al-e-hashem and Yacine Rekik
- Supply chain coordination with stock-dependent demand rate and credit incentives pp. 105-111

- Shuai Yang, Ki-sung Hong and Chulung Lee
- Rail car fleet design: Optimization of structure and size pp. 112-119

- S.T. Klosterhalfen, J. Kallrath and G. Fischer
- A vendor managed inventory model using continuous approximations for route length estimates and Markov chain modeling for cost estimates pp. 120-132

- Christian Larsen and Marcel Turkensteen
- An MILP approximation for ordering perishable products with non-stationary demand and service level constraints pp. 133-146

- Karin G.J. Pauls-Worm, Eligius M.T. Hendrix, René Haijema and Jack G.A.J. van der Vorst
- Emergency orders in the periodic-review inventory system with fixed ordering costs and compound Poisson demand pp. 147-157

- Søren Glud Johansen and Anders Thorstenson
- Optimal ordering, issuance and disposal policies for inventory management of perishable products pp. 158-169

- Rene Haijema
- Simulation optimization for the stochastic economic lot scheduling problem with sequence-dependent setup times pp. 170-176

- Nils Löhndorf, Manuel Riel and Stefan Minner
- Lead-time investigation and estimation in divergent supply chains pp. 177-189

- Peter Berling and Mojtaba Farvid
- Adapting inventory models for handling various payment structures using net present value equivalence analysis pp. 190-200

- Patrick Beullens and Gerrit K. Janssens
- Cumulative staircase considerations for dynamic lotsizing when backlogging is allowed pp. 201-211

- Robert W. Grubbström
- Intermittent demand forecasting: An empirical study on accuracy and the risk of obsolescence pp. 212-219

- Mohamed Zied Babai, Aris Syntetos and Ruud Teunter
- More grip on inventory control through improved forecasting: A comparative study at three companies pp. 220-237

- E. van Wingerden, R.J.I. Basten, Rommert Dekker and W.D. Rustenburg
- Optimal policy structure characterization for a two-period dual-sourcing inventory control model with forecast updating pp. 238-249

- Ali Cheaitou, Christian van Delft, Zied Jemai and Yves Dallery
- Decision alternatives between expected cost minimization and worst case scenario in emergency supply – Second revision pp. 250-260

- Peter Kelle, Helmut Schneider and Huizhi Yi
- Investing in disaster management capabilities versus pre-positioning inventory: A new approach to disaster preparedness pp. 261-272

- Nathan Kunz, Gerald Reiner and Stefan Gold
- Green supplier selection and evaluation using DEA-type composite indicators pp. 273-278

- Imre Dobos and Gyöngyi Vörösmarty
- Impact of transportation lead-time variability on the economic and environmental performance of inventory systems pp. 279-288

- Emel Arıkan, Johannes Fichtinger and Jörg M. Ries
- Vendor Managed Inventory (VMI) with Consignment Stock (CS) agreement for a two-level supply chain with an imperfect production process with/without restoration interruptions pp. 289-301

- Ehab Bazan, Mohamad Y. Jaber, Simone Zanoni and Lucio E. Zavanella
- Joint inventory and pricing decisions when customers are delay sensitive pp. 302-312

- M. Güray Güler, Taner Bilgiç and Refik Güllü
- An improved decision rule for emergency replenishments pp. 313-317

- Sven Axsäter
- Developing a service offering for a logistical service provider—Case of local food supply chain pp. 318-326

- Antti Martikainen, Petri Niemi and Petra Pekkanen
Volume 156, issue C, 2014
- Cyclic scheduling of perishable products in parallel machine with release dates, due dates and deadlines pp. 1-12

- Nargess Shirvani, Rubén Ruiz and Shahram Shadrokh
- A risk-averse competitive newsvendor problem under the CVaR criterion pp. 13-23

- Meng Wu, Stuart X. Zhu and Ruud H. Teunter
- Some new problems on two-agent scheduling to minimize the earliness costs pp. 24-30

- Shuenn-Ren Cheng
- Online bounded-batch scheduling to minimize total weighted completion time on parallel machines pp. 31-38

- Ran Ma, Long Wan, Lijun Wei and Jinjiang Yuan
- The green bullwhip effect: Transferring environmental requirements along a supply chain pp. 39-51

- Su-Yol Lee, Robert D. Klassen, Andrea Furlan and Andrea Vinelli
- Warranty return policies for products with unknown claim causes and their optimisation pp. 52-61

- Shaomin Wu
- New AHP-based approaches for multi-criteria inventory classification pp. 62-74

- F. Lolli, A. Ishizaka and R. Gamberini
- How durable should durable products be made under different scenarios of technological advance? pp. 75-82

- Lian Qi and James Sawhill
- Product development practices, manufacturing practices, and performance: A mediational perspective pp. 83-97

- Xenophon Koufteros, Guanyi Lu, Richard C. Peters, Kee-hung Lai, Christina W.Y. Wong and T.C. Edwin Cheng
- Long- and short-term efficiency in an automobile factory: An econometric case study pp. 98-107

- Carlos Sáenz-Royo and Vicente Salas-Fumás
- Closed-loop supply chain models for a high-tech product under alternative reverse channel and collection cost structures pp. 108-123

- Chia-Hung Chuang, Charles Wang and Yabing Zhao
- Yield and allocation management in a continuous make-to-stock system with demand upgrade substitution pp. 124-131

- Guanghua Han, Ming Dong and Shaoxuan Liu
- Modeling and analyzing information delays in supply chains using transfer functions pp. 132-145

- Kai Hoberg and Ulrich W. Thonemann
- Setting safety stocks for stable rotation cycle schedules pp. 146-158

- James A. Rappold and Keenan D. Yoho
- An EPQ model of ramp type demand with Weibull deterioration under inflation and finite horizon in crisp and fuzzy environment pp. 159-166

- Shilpi Pal, G.S. Mahapatra and G.P. Samanta
- Note on “The economic lot-sizing problem with remanufacturing and one-way substitution” pp. 167-168

- Pedro Piñeyro and Omar Viera
- The immediate impact of purchasing/sales contract announcements on the market value of firms: An empirical study in China pp. 169-179

- Jun Yang, Wei Lu and Chunhui Zhou
- On intermittent demand model optimisation and selection pp. 180-190

- Nikolaos Kourentzes
- Applying real options to IT investment evaluation: The case of radio frequency identification (RFID) technology in the supply chain pp. 191-207

- Andriana G. Dimakopoulou, Katerina C. Pramatari and Andrianos Tsekrekos
- Information and decision-making delays in MRP, KANBAN, and CONWIP pp. 208-213

- Qiguo Gong, Yuru Yang and Shouyang Wang
- An integrated approach for ship block manufacturing process performance evaluation: Case from a Korean shipbuilding company pp. 214-222

- Jaehun Park, Dongha Lee and Joe Zhu
- The routed inventory pooling problem with three non-identical retailers pp. 223-234

- Harmen W. Bouma and Ruud H. Teunter
- How to calibrate conventional market-oriented organizational culture in 21st century production-centered firms? A customer relationship perspective pp. 235-245

- Chiquan Guo, Yong J. Wang and Ashley Metcalf
- Time-of-use based electricity cost of manufacturing systems: Modeling and monotonicity analysis pp. 246-259

- Yong Wang and Lin Li
- Supply quality management with optimal wholesale price and revenue sharing contracts: A two-stage game approach pp. 260-268

- Fouad El Ouardighi
- Performance topology mapping: understanding the drivers of performance pp. 269-282

- Rhian Silvestro
- Random switching exponential smoothing and inventory forecasting pp. 283-294

- Giacomo Sbrana and Andrea Silvestrini
- The study of relationships between the collaboration for supply chain, supply chain capabilities and firm performance: A case of the Taiwan׳s TFT-LCD industry pp. 295-304

- Shu-Hsien Liao and Fang-I Kuo
- Pricing and product line strategy in a supply chain with risk-averse players pp. 305-315

- Tiaojun Xiao and Tiantian Xu
- Inventory management with simultaneously horizontal and vertical substitution pp. 316-324

- Taofeng Ye
- Scheduling jobs with equal-processing-time on parallel machines with non-identical capacities to minimize makespan pp. 325-331

- Jun-Qiang Wang and Joseph Y.-T. Leung
- An operational policy for a three-stage distributive supply chain system with retailers’ backorders pp. 332-345

- Bhaba R. Sarker, Ratkrit Rochanaluk, Huizhi Yi and Pius J. Egbelu
- Price competition and co-operation in a duopoly closed-loop supply chain pp. 346-360

- Sarat Kumar Jena and S.p Sarmah
| |