International Journal of Production Economics

1991 - 2025

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Scheduling jobs with values exponentially deteriorating over time pp. 163-169: Theodore G. Voutsinas and Costas P. Pappis
The development of gradual-priority weighting approach for the multi-objective flowshop scheduling problem pp. 171-183: Pei-Chann Chang, Jih-Chang Hsieh and Shui-Geng Lin
A branch and bound algorithm to minimize the total flow time for m-machine permutation flowshop problems pp. 185-196: Chia-Shin Chung, James Flynn and Omer Kirca
A comprehensive bibliography on justification of advanced manufacturing systems pp. 197-208: Feraidoon Raafat
Effects of finite repair capacity in multi-echelon, multi-indenture service part supply systems pp. 209-230: A. Sleptchenko, M. C. van der Heijden and A. van Harten
New product warranty: A literature review pp. 231-260: D. N. P. Murthy and I. Djamaludin
Capacity utilisation and profitability: A decomposition of short-run profit efficiency pp. 261-278: Timothy Coelli, Emili Grifell-Tatje and Sergio Perelman
The impact of management accounting, product structure, product mix algorithm, and planning horizon on manufacturing performance pp. 279-299: Bih-Ru Lea and Lawrence D. Fredendall
A comparison of different methods for estimating the average inventory level in a (Q,R) system with backorders pp. 303-316: Amy Hing-Ling Lau and Hon-Shiang Lau

Economic design of control chart for trended processes pp. 85-92: D. Q. Cai, M. Xie, T. N. Goh and X. Y. Tang
Process optimization via neural network metamodeling pp. 93-100: M. Chambers and C. A. Mount-Campbell
A fuzzy multiple objective programming approach for the selection of a flexible manufacturing system pp. 101-111: E. Ertugrul Karsak and Onur Kuzgunkaya
Real-time dynamic shop floor scheduling using Evolutionary Algorithms pp. 113-120: J. Kaschel, Tobias Teich and Bernd Zacher
A continuous time inventory model for a product recovery system with multiple options pp. 121-141: Rainer Kleber, Stefan Minner and Gudrun Kiesmuller
MAIC: A data and knowledge-based system for supporting the maintenance of chemical plant pp. 143-159: Giovani Pieri, Michel R. Klein and Mario Milanese

Filling a gap in traditional transaction cost economics:: Towards transaction benefits-based analysis pp. 1-14: K. Blomqvist, K. Kylaheiko and V. -M. Virolainen
A cost model of industrial maintenance for profitability analysis and benchmarking pp. 15-31: Kari Komonen
The role of cost management in network relationships pp. 33-43: Harri I. Kulmala, Jari Paranko and Erkki Uusi-Rauva
A cost and operations based product heterogeneity index pp. 45-55: Carlos Ocampo y Vilas and Nico Vandaele
The effects of customization on spare part business: A case study in the metal industry pp. 57-66: Petri Suomala, Matti Sievanen and Jari Paranko
On the non-optimality of the average cost approach for inventory models with remanufacturing pp. 67-73: Ruud Teunter and Erwin van der Laan
Activity-based costing and process modeling for cost-conscious product design: A case study in a manufacturing company pp. 75-82: Katja Tornberg, Miikka Jamsen and Jari Paranko

An approach to the design of a manufacturing cell under economic considerations pp. 223-237: Mauricio Cabrera-Rios, Clark A. Mount-Campbell and Shahrukh A. Irani
Inventory models with random yield in a random environment pp. 239-253: Asli Sencer Erdem and Suleyman Ozekici
An optimization model for refinery production scheduling pp. 255-270: Maud Gothe-Lundgren, Jan T. Lundgren and Jan A. Persson
Modelling flow and jobbing shops as a queueing network for workload control pp. 271-285: A. Haskose, B. G. Kingsman and D. Worthington
Stationary optimal lengths for the plant renewal problem pp. 287-293: Elisa Luciano and L. Peccati
Developing a new world class model for small and medium sized make-to-order companies pp. 295-310: Shaladdin Muda and Linda Hendry
Determining optimum Genetic Algorithm parameters for scheduling the manufacturing and assembly of complex products pp. 311-322: P. Pongcharoen, C. Hicks, P. M. Braiden and D. J. Stewardson
Planning and replanning the master production schedule under demand uncertainty pp. 323-334: Ou Tang and Robert W. Grubbstrom
How to release orders in order to minimise system inventory and system nervousness? pp. 335-343: K. H. van Donselaar and B. J. Gubbels

Input-output models for the analysis of a local/global supply chain pp. 119-131: Vito Albino, Carmen Izzo and Silvana Kuhtz
Transfer function analysis of forecasting induced bullwhip in supply chains pp. 133-144: J. Dejonckheere, S. M. Disney, M. R. Lambrecht and D. R. Towill
A model for supply planning under lead time uncertainty pp. 145-152: Alexandre Dolgui and Mohamed-Aly Ould-Louly
Inventory management in supply chains: a reinforcement learning approach pp. 153-161: Ilaria Giannoccaro and Pierpaolo Pontrandolfo
Supply chain simulation - a tool for education, enhancement and endeavour pp. 163-175: Matthias Holweg and John Bicheno
Lateral coordination in a logistics outsourcing relationship pp. 177-185: Janne Huiskonen and Timo Pirttila
An analytic approach to production capacity allocation and supply chain design pp. 187-195: Jukka Korpela, Kalevi Kylaheiko, Antti Lehmusvaara and Markku Tuominen
Environmental control for process improvement and process efficiency in supply chain management - the case of the meat chain pp. 197-206: Gerhard Schiefer
Planning and optimization of hub-and-spoke transportation networks of cooperative third-party logistics providers pp. 207-220: Gunther Zapfel and Michael Wasner

Incentive plans for productive efficiency, innovation and learning pp. 1-11: Per Agrell, Peter Bogetoft and Jorgen Tind
Valuation of product-mix flexibility using real options pp. 13-28: Jens Bengtsson and Jan Olhager
Assessment of quality and maturity level of R&D pp. 29-35: Pekka Berg, Mikko Leinonen, Virpi Leivo and Jussi Pihlajamaa
The impact of worker differences on production system output pp. 37-44: John A. Buzacott
Risk analysis and assessment in network environments: A dyadic case study pp. 45-55: Jukka Hallikas, Veli-Matti Virolainen and Markku Tuominen
Total productivity measurement based on partial productivity ratios pp. 57-67: Mika Hannula
Analyzing productivity with the enabler-effect map pp. 69-78: Paul Lillrank, Sami Holopainen and Teemu Paavola
The problem of managing product development engineers: Can the balanced scorecard be an answer? pp. 79-90: Jaana Sandstrom and Jouko Toivanen
Representation and calculation of economic uncertainties: Intervals, fuzzy numbers, and probabilities pp. 91-98: Hans Schjaer-Jacobsen
Improving the reliability of the customer order fulfilment process in a product identification company pp. 99-107: T. J. Turner, K. Mendibil, U. S. Bititci, P. Daisley and T. H. J. Breen
Valuing exploration and production projects by means of option pricing theory pp. 109-116: Martin Zettl